What quantity of heat (in kJ) is absorbed in the process of making 0.887 mol of CF₄ from the following reaction?
C (s) + 2 F₂ (g) → CF₄ (g) ∆H° = 141.3 kJ/mol

The three experimental error that most likely would have occurred are  Someone might have jiggled the table and made the water surface tension bubble spill over, Komal could have mixed up the labels on the vials and Someone might have jiggled the table and made the isopropyl alcohol surface tension bubble spill over. The correct option to this question are A,B and C.

For more information on experimental error kindly visit to

https://brainly.com/question/28269575

#SPJ1

The total energy of the system remains constant, and energy is conserved. Option A.

According to the law of conservation of energy, energy cannot be created or destroyed, it can only be transformed from one form to another.

In this case, the excess 22 kJ of energy is stored in the chemical bonds of the products when they are formed. The energy comes from the chemical bonds of the reactants, which break during the reaction and release energy.

Therefore, the total energy of the system remains constant, and energy is conserved.

More on bond energy can be found here: https://brainly.com/question/26141360

#SPJ1

Answer: 5.58x10^23 atoms of Al

Explanation:

Here's the math:

I converted grams to mols then mols to atoms.

Answer:

decomposition reaction

Explanation:

The given chemical reaction, 2NaCl(s) → 2Na(s) + Cl2(g), represents the decomposition of sodium chloride (NaCl) into its constituent elements, sodium (Na) and chlorine (Cl2).

This reaction can be classified as a decomposition reaction, which is a type of chemical reaction where a single compound breaks down into two or more simpler substances. In this case, the reactant NaCl decomposes into Na and Cl2 as the products.

The reaction is facilitated by heating or passing an electric current through the NaCl to break the bonds between the Na and Cl atoms.

Hope this helps!

The value of the solubility product constant for PbBr2 at 25°C is 6.70 ×  [tex]10^-^6[/tex]. It is important to note that lead (II) bromide does not react with water because it is a strong electrolyte.

PbBr2 (s) ⇌ Pb2+ (aq) + 2Br- (aq)

The solubility of (lead)PbBr2 is given as 0.427 g per 100 mL of solution at 25°C. One can convert this to moles per liter using the molar mass of PbBr2, which is 367.01 g/mol:

0.427 g PbBr2 × (1 mol PbBr2 / 367.01 g PbBr2) × (10 / 1 L) = 0.0116 mol/L

[Pb2+] = 0.0116 mol/L

[Br-] = 2 × 0.0116 mol/L = 0.0232 mol/L

Substituting these values into the expression for Ksp

Ksp = [Pb2+][Br-]2

= (0.0116 mol/L)(0.0232 mol/L)2

= 6.70 × [tex]10^-^6[/tex]

Learn more about molar solubility here.

https://brainly.com/question/31503670

#SPJ1

Answer: Some signs that could be an indicator of a chemical reaction occurring are changes in color and temperature, the formation of gas, and precipitate.

Explanation: There is no single way to conclude that a reaction has occurred. Some reactions show changes in temperature and color, while others may form ppt. It varies for each and every reaction.

E.g. This reaction of Copper Sulphate with Sodium Hydroxide gives Copper Hydroxide ppt.

CuSO4 + 2 NaOH ------> Na2SO4 + Cu(OH)2 (ppt.)

To read more about chemical reactions:

https://brainly.in/question/2558491

10.50 kg of iron will be produced from 15 kg of iron (III) oxide.

The amount of matter in an item is measured by its mass, which is a fundamental physical quantity. It is a scalar amount that is measured in kilograms (kg) or grams (g). Regardless of an object's location or the force pressing against it, its mass always remains constant.

Iron (III) oxide and elemental iron react chemically in the following balanced chemical equation:

2 Fe2O3+ 3 C = 4 Fe + 3 CO2

Due to the reaction between 2 moles of Fe2O3 and 4 moles of Fe, the mole ratio of Fe2O3 to Fe is either 2:4 or 1:2.

The amount of iron created from 15 kg of Fe2O3 can be calculated using this mole ratio:

Fe2O3 = 2 moles of Fe per mole.

Molecular weight of Fe2O3 is 159.69 g/mol.

Fe2O3 has a mass of 15 kg and a density of 15,000 g/mol, or 94.00 moles.

We can figure out how many moles of Fe were produced using the mole ratio of 1:2:

We can figure out how many moles of Fe were produced using the mole ratio of 1:2:

2 moles of Fe for each mole of Fe2O3 94.00 moles of Fe2O3 multiplied by (2 moles of Fe for each mole of Fe2O3) results in 188.00 moles of Fe.

The molar mass of Fe can then be used to convert the moles of iron to mass as follows:

Fe's molecular weight is 55.85 g/mol.

188.00 moles of Fe produced at a rate of 55.85 g/mol result in a mass of 10,499.80 g or 10.50 kg.

Hence, 10.50 kg of iron will be produced from 15 kg of iron (III) oxide.

To know more about mass, visit:

brainly.com/question/19694949

#SPJ1

Answer:

The balanced chemical equation for the combustion of methane gas (CH4) is:

CH4 + 2O2 → CO2 + 2H2O

From the equation, we can see that for every mole of methane gas that reacts, 2 moles of water are produced.

The molar mass of water (H2O) is 18.01528 g/mol.

To determine the number of moles of water produced by 330 g of water, we can use the following equation:

moles = mass/molar mass

moles of water = 330 g / 18.01528 g/mol = 18.3276 mol

Since the ratio of methane to water in the balanced equation is 1:2, we know that for every mole of water produced, half a mole of methane is consumed.

moles of methane = 0.5 x moles of water = 0.5 x 18.3276 mol = 9.1638 mol

Therefore, 9.16 moles of methane gas will combust to produce 330 grams of water.

Answer:

All substances should be equally soluble (or equally insoluble) in both.

The mass of the iron is 17.64 kg.

To solve this problem, we need to use the principle of heat transfer, which states that the total heat gained by one object must be equal to the total heat lost by the other object when they are in thermal equilibrium.

Let's start by calculating the heat lost by the iron and the heat gained by the water. We can use the following formula:

Q = m×c×ΔT

where Q is the heat transferred, m is the mass of the object, c is its specific heat capacity, and ΔT is the temperature change.

Heat lost by iron = Heat gained by the water

[tex]m_{iron}[/tex] x [tex]c_{iron}[/tex] x ( [tex]T_{f}[/tex] - [tex]T_{i}[/tex] ) = [tex]m_{water}[/tex] x [tex]c_{water}[/tex] x ( [tex]T_{f}[/tex] - [tex]T_{i}[/tex] )

where [tex]T_{f}[/tex] is the final temperature of the system (30°C), [tex]T_{i}[/tex] is the initial temperature of each substance (120°C for the iron and 20°C for the water), [tex]c_{iron}[/tex] and [tex]c_{water}[/tex] are the specific heat capacities of iron and water, respectively.

We need to solve for [tex]m_{iron}[/tex], which is the unknown mass of iron. Rearranging the equation, we get:

[tex]m_{iron}[/tex] = ([tex]m_{water}[/tex] x [tex]c_{water}[/tex] x ([tex]T_{f}[/tex] - [tex]T_{i}[/tex] )) / ([tex]c_{iron}[/tex] x ([tex]T_{i}[/tex] - [tex]T_{f}[/tex] ))

Substituting the given values, we get:

[tex]m_{iron}[/tex]= (750g x 4.18 J/g°C x (30°C - 20°C)) / (0.45 J/g°C x (120°C - 30°C))

[tex]m_{iron}[/tex]= 17,640 g = 17.64 kg (to two decimal places)

Therefore, the mass of the iron is 17.64 kg.

To learn more about iron mass calculation visit:

brainly.com/question/14143857

Answer: B

Explanation: Anything that has mass and takes up space

The first order reaction is defined by the rate law:

rate = k[A]

where k is the rate constant and [A] is the concentration of the reactant.

If we integrate this rate law, we get:

ln([A]_t/[A]_0) = -kt

where [A]_t is the concentration of A at time t, [A]_0 is the initial concentration of A, k is the rate constant, and t is time.

We can use this equation to solve for k given the initial and final concentrations of A and the time interval.

In this case, we have:

[A]_t = 0.632 M

[A]_0 = 0.816 M

t = 16.0 min

Substituting these values into the equation above, we get:

ln(0.632/0.816) = -k(16.0)

Solving for k, we get:

k = (1/16.0) * ln(0.816/0.632) = 0.0316 min^-1

Therefore, the value of the rate constant k for this first order reaction is 0.0316 min^-1.

[tex]\huge{\colorbox{black}{\textcolor{lime}{\textsf{\textbf{I\:hope\:this\:helps\:!}}}}}[/tex]

[tex]\begin{align}\colorbox{black}{\textcolor{white}{\underline{\underline{\sf{Please\: mark\: as\: brillinest !}}}}}\end{align}[/tex]

[tex]\textcolor{blue}{\small\texttt{If you have any further questions,}}[/tex] [tex]\textcolor{blue}{\small{\texttt{feel free to ask!}}}[/tex]

♥️ [tex]{\underline{\underline{\texttt{\large{\color{hotpink}{Sumit\:\:Roy\:\:(:\:\:}}}}}}\\[/tex]

250ml is the volumes of air and hydrogen gas at 178°C and 1.00 atm that are necessary to produce 1.00 3 103 kg pure molyb denum from MoS2.

A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.

The volume much a container is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold.

MoS[tex]_2[/tex] (g) + 7/2 O[tex]_2[/tex] (g) -------> MoO[tex]_3[/tex] (s) + 2SO[tex]_2[/tex] (g)

MoO[tex]_3[/tex] (s) + 3H[tex]_2[/tex] (g) ------------> Mo (s) + 3H[tex]_2[/tex]O (l)

P×V = n×R×T  

moles = 1000/ 95.96=10.6

1×V =10.6×0.821×290

V= 250ml

To know more about volume, here:

https://brainly.com/question/23477586

#SPJ1

250ml is the volumes of air and hydrogen gas at 178°C and 1.00 atm that are necessary to produce 1.00 3 103 kg pure molyb denum from MoS2.

A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.

The volume much a container is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold.

MoS[tex]_2[/tex] (g) + 7/2 O[tex]_2[/tex] (g) -------> MoO[tex]_3[/tex] (s) + 2SO[tex]_2[/tex] (g)

MoO[tex]_3[/tex] (s) + 3H[tex]_2[/tex] (g) ------------> Mo (s) + 3H[tex]_2[/tex]O (l)

P×V = n×R×T  

moles = 1000/ 95.96=10.6

1×V =10.6×0.821×290

V= 250ml

To know more about volume, here:

https://brainly.com/question/23477586

#SPJ1

Answer:

I don’t have any specific examples of wet labs that study the effects of human activity on wetlands. However, some common human activities that can affect wetlands include the construction of buildings and roads, agricultural land use, and overfishing. Wet labs can be used to study the impact of these activities on the physical, chemical, and biological processes in wetland ecosystems.

The empirical formula of the compound is S₁P₁, and the molecular formula is S₄P₄.

The empirical formula gives the simplest whole-number ratio of atoms in a compound, whereas the molecular formula gives the actual number of atoms of each element in a molecule of the compound.

The molecular formula can be found by dividing the molar mass of the compound by the empirical formula mass and rounding the result to the nearest whole number. The resulting number gives the subscript in the molecular formula.

To determine the empirical formula of the compound, we need to convert the mass percentages into mole ratios.

Assuming a 100 g sample of the compound, there would be 50.9 g of sulfur and 49.1 g of phosphorus.

The moles of sulfur can be calculated as: moles of S = (50.9 g S) / (32.06 g/mol S) = 1.588 mol S

The moles of phosphorus can be calculated as: moles of P = (49.1 g P) / (30.97 g/mol P) = 1.585 mol P

To find the empirical formula, we need to divide both the number of moles of sulfur and phosphorus by the smallest of the two.

So, the empirical formula is: S₁P₁

To determine the molecular formula, we need to know the molar mass of the compound. The given molar mass is 252 g/mol.

The empirical formula mass can be calculated as:

S₁P₁ = 1 x 32.06 g/mol S + 1 x 30.97 g/mol P = 63.03 g/mol

To find the molecular formula, we need to divide the molar mass of the compound by the empirical formula mass:

molecular formula mass / empirical formula mass = n

252 g/mol / 63.03 g/mol = 3.993

Round this to the nearest whole number to get the subscript in the molecular formula: S₄P₄

Learn more about empirical formula here:

https://brainly.com/question/14044066

#SPJ1

Answer:

P2 = 1125 mmHg

Explanation:

Gas Pressure Calculation

To solve this problem, we need to use the combined gas law, which relates the pressure, volume, and temperature of a gas under different conditions. The combined gas law is given by:

(P1V1)/T1 = (P2V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, and P2, V2, and T2 are the final pressure, volume, and temperature.

Let's start by calculating the initial conditions:

P1 = 750 mmHg

V1 = 120 cm^3

T1 = 25°C + 273.15 = 298.15 K (temperature in Kelvin)

Now we can plug in these values and solve for P2:

(P1V1)/T1 = (P2V2)/T2

(750 mmHg x 120 cm^3) / 298.15 K = (P2 x 150 cm^3) / (40°C + 273.15)

Simplifying this equation, we get:

P2 = (750 mmHg x 120 cm^3 x (40°C + 273.15)) / (298.15 K x 150 cm^3)

P2 = 1125 mmHg

Therefore, the pressure of the gas would increase to 1125 mmHg if its volume increased to 150 cm^3 at 40°C.

ChatGPT

Answer: The pH will decrease by 0.109 units.

Explanation:

To solve this problem, we will need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the initial pH of the buffer, pKa is the acid dissociation constant of acetic acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

First, we need to find the initial concentrations of [A-] and [HA] in the buffer. Since the total molarity of acid and conjugate base is 0.100 M and we know the volume of the buffer, we can use the following equation:

moles of acid = moles of conjugate base

0.100 M x 2.00x10^-2 L = [HA] x 2.00x10^-2 L

[HA] = 0.100 M

Since we know the pH of the buffer, we can use the following equation to find the concentration of the conjugate base:

pH = pKa + log([A-]/[HA])

5.000 = 4.740 + log([A-]/0.100)

[A-]/[HA] = 10^(5.000-4.740)

[A-]/[HA] = 1.995

[A-] = 1.995 x 0.100 M = 0.1995 M

Now, we need to find the new concentrations of [A-] and [HA] after the addition of HCl. Since the volume of the buffer is now 2.069x10^-2 L (2.00x10^-2 L + 6.90x10^-3 L), we can use the following equation:

moles of acid + moles of HCl = moles of conjugate base

0.100 M x 2.00x10^-2 L + 0.300 M x 6.90x10^-3 L = [HA] x 2.069x10^-2 L

[HA] = 0.1295 M

The concentration of the conjugate base can be found using the equation:

[A-]/[HA] = 10^(pH-pKa)

1.891 = 10^(pH-4.740)

pH-4.740 = log(1.891)

pH = log(1.891) + 4.740

pH = 5.000 - 0.109

Therefore, the pH will decrease by 0.109 units.

The largest source of error in the experiment of Hess's Law is human error.

An experiment is a procedure carried out to test a hypothesis, or an educated guess, in order to support or reject it. Experiments are conducted in order to explore new phenomena, or to verify and validate existing theories or laws. Experiments provide insight into cause-and-effect by demonstrating what outcome occurs when a particular factor is manipulated. Experiments vary greatly in goal and scale, but all share the same basic structure. They begin with a hypothesis, or an educated guess, that is then tested with an experiment. Results are measured and analyzed and conclusions are drawn, based on the results of the experiment.

This includes miscalculations when measuring, recording and interpreting data, making mistakes when setting up the experiment, or misreading the results. Also, inaccurate or faulty equipment used in the experiment can lead to errors. Another potential source of error is the presence of impurities in the reactants, which can alter the reaction enthalpies and thus the results of the experiment.

To learn more about experiment

https://brainly.com/question/24795637

#SPJ1

The problems in contact process are Catalyst Deactivation, Corrosion, Environmental Impact and Safety Concerns.

The Contact Process is a widely-used method for producing sulfuric acid, which is one of the most important industrial chemicals. However, there are several problems associated with the Contact Process:

(1) Catalyst Deactivation: The Contact Process requires the use of a catalyst, typically vanadium pentoxide (V₂O₅), to increase the rate of the reaction. However, over time the catalyst can become deactivated due to impurities in the reactants or the formation of a coating on the catalyst surface. This can reduce the efficiency of the process and require expensive catalyst replacement.

(2) Corrosion: The reaction between sulfur dioxide (SO₂) and oxygen (O₂) to form sulfur trioxide (SO₃) is highly exothermic and produces heat, which can cause corrosion of the reaction vessel and associated equipment. This can lead to leaks, failures, and other safety hazards.

(3) Environmental Impact: The Contact Process produces large quantities of sulfur dioxide, which is a major contributor to acid rain and other environmental problems. In addition, the process consumes large amounts of energy and produces greenhouse gases, contributing to climate change.

(4) Safety Concerns: The Contact Process involves the handling of hazardous materials, including sulfur dioxide, sulfur trioxide, and sulfuric acid. These materials can pose significant health and safety risks to workers and the surrounding environment if not handled properly.

Learn more about catalyst here:

https://brainly.com/question/24430084

#SPJ9

Assumptions made in the lab about heat transfers (Question 5):

1. The specific heat capacity of the metal being tested is constant and does not change with temperature.

2. The heat transfer between the metal sample and the surroundings is only due to conduction, and other modes of heat transfer such as convection or radiation are negligible.

3. The heat lost or gained by the metal sample is fully absorbed or released by the water in the calorimeter and the calorimeter itself has negligible heat capacity.

4. There is no heat exchange with the surrounding environment, and the calorimeter is perfectly insulated.

Consequences of false assumptions (Question 6):

If any of the above assumptions are false, it could affect the accuracy of the results obtained in the lab. For example:

1. If the specific heat capacity of the metal being tested changes with temperature, it could lead to inaccurate measurements of heat transfer and calculated specific heat capacity values.

2. If convection or radiation is not negligible, it could result in additional heat transfer between the metal sample and the surroundings, leading to inaccurate results.

3. If the calorimeter has significant heat capacity or there is heat exchange with the surrounding environment, it could affect the measurement of heat transfer and calculated specific heat capacity values.

Sources of error and their effects on data (Question 7):

1. Measurement errors: Errors in measuring the initial and final temperatures of the metal sample and water, or the mass of the metal sample and water, could affect the accuracy of calculated specific heat capacity values.

2. Heat loss or gain to the environment: If there is heat exchange with the surrounding environment during the experiment, it could result in inaccurate measurements of heat transfer and specific heat capacity values.

3. Assumption violations: If any of the assumptions mentioned earlier are not valid, it could affect the accuracy of the results obtained in the lab.

Metal with highest specific heat capacity (Question 8):

The metal with the highest specific heat capacity would be the one that requires the most amount of heat energy to raise its temperature by a given amount compared to the other metals tested in the lab. The metal with the highest specific heat capacity would have a larger value of specific heat capacity, indicating that it can absorb more heat energy per unit mass per unit temperature change compared to the other metals. This means that the metal with the highest specific heat capacity can store more heat energy without experiencing a significant increase in temperature, and it has a greater ability to resist changes in temperature when heat is added or removed.

If given 3.5 g Fe, 1.88 × 10²² molecules of Fe₂O₃ are produced, and if given 2.28 g O₂, 2.86 × 10²² molecules of Fe₂O₃ are produced.

Balanced chemical equation for the reaction between iron (Fe) and oxygen (O₂) to form iron oxide (Fe₂O) is;

4Fe + 3O₂ → 2Fe₂O₃

To calculate how many molecules of Fe₂O₃ are produced from 3.5 g Fe or 2.28 g O₂, we need to use the molar mass of Fe and O₂ and the stoichiometry of the balanced equation.

Molar mass of Fe = 55.85 g/mol

Molar mass of O₂ = 32 g/mol

Using these values, we can calculate the number of moles of Fe and O₂;

Number of moles of Fe = 3.5 g / 55.85 g/mol = 0.0626 mol

Number of moles of O₂ = 2.28 g / 32 g/mol = 0.0713 mol

Now we can use the balanced equation to determine the number of moles of Fe₂O₃ produced;

4Fe + 3O₂ → 2Fe₂O₃

4 moles Fe produces 2 moles Fe₂O₃

So, the number of moles of Fe₂O₃ produced from 3.5 g Fe is;

0.0626 mol Fe × (2 mol Fe₂O₃ / 4 mol Fe) = 0.0313 mol Fe2O3

And the number of moles of Fe₂O₃ produced from 2.28 g O₂ is;

0.0713 mol O₂ × (2 mol Fe₂O₃ / 3 mol O₂) = 0.0475 mol Fe₂O₃

To calculate the number of molecules of Fe₂O₃, we can use Avogadro's number;

1 mole = 6.022 × 10²³ molecules

So, the number of molecules of Fe₂O₃ produced from 3.5 g Fe is;

0.0313 mol Fe₂O₃ × 6.022 × 10²³ molecules/mol = 1.88 × 10²² molecules

And the number of molecules of Fe₂O₃ produced from 2.28 g O₂ is;

0.0475 mol Fe₂O₃ × 6.022 × 10²³ molecules/mol

= 2.86 × 10²²molecules

To know more about iron oxide here

https://brainly.com/question/18500540

#SPJ1

Answer: The answer is B,C,D

Explanation: Solar activity can affect satellite orbits, communication satellites, and the local power grids. It can also impact our spacecraft throughout the solar system, especially orbiters or landers on surfaces without an atmosphere.

therefore, Solar flares and coronal mass ejections can disrupt communications, damage satellites and can cause power outages on Earth.

During high periods of activity, the higher amount of heat radiating from the Sun will melt satellites, disrupting communications.

Coronal holes allow more of the Sun’s material to flow out into space.

For more details about Sun affects : https://brainly.com/question/10274585?referrer=searchResults

The options that apply are:

B. Solar flares and coronal mass ejections can disrupt communications, damage satellites, and can cause power outages on Earth.

D. Coronal holes allow more of the Sun’s material to flow out into space.

Coronal holes, mentioned in option D, allow more of the Sun's material to flow out into space. This primarily affects the solar wind, which consists of charged particles emitted by the Sun. The increased solar wind from coronal holes can impact spacecraft and satellites throughout the solar system.

Solar flares and coronal mass ejections, mentioned in option B, are intense bursts of energy and matter from the Sun. These events can release a large number of charged particles and electromagnetic radiation. When directed towards Earth, they can interfere with satellite communications, damage sensitive electronic equipment, and disrupt power grids, potentially causing power outages.

Option A, stating that coronal holes reduce the amount of material leaving the Sun, is incorrect. Coronal holes allow more material, particularly the solar wind, to flow out into space, as mentioned in option D.

Option C, suggesting that the higher amount of heat radiating from the Sun during high activity melts satellites, disrupting communications, is not accurate. While solar activity can increase radiation levels in space, it does not typically lead to satellite melting or disruption of communications due to excess heat.

Therefore, the correct options are B and D. Solar flares and coronal mass ejections can disrupt technology on Earth, and coronal holes allow more material from the Sun to flow into space.

Learn more about Solar flares from the link given below.

https://brainly.com/question/32145512

#SPJ2

the approximate temperature of each of these regions are:

Photosphere: 4500K to 6800K

Chromosphere: 10⁴ K to 10⁶K

Corona: A few million k

How to solve the question?

The photosphere is the visible surface of the sun, and its temperature ranges from approximately 4500K to 6800K (Kelvin). This temperature range is where the majority of the sun's light and radiation is emitted, and it is also where sunspots and solar flares occur. The photosphere is also where the sun's magnetic field lines emerge and interact with the surrounding plasma.

The chromosphere is the region of the sun that lies just above the photosphere. Its temperature ranges from approximately 10^4 K to 10^6 K, making it hotter than the photosphere. This region is visible during a solar eclipse as a red or pink ring around the sun. The chromosphere is also where solar prominences and flares occur, which are large eruptions of hot plasma from the sun's surface.

The corona is the outermost layer of the sun's atmosphere, and its temperature is several million Kelvin (a few million K). The corona is much hotter than the layers below it, despite being farther away from the sun's core. The corona is visible during a total solar eclipse as a white halo around the sun. The corona is also where the solar wind originates, which is a stream of charged particles that flows out into space and can affect the Earth's magnetosphere.

In summary, the approximate temperature of each of these regions are:

Photosphere: 4500K to 6800K

Chromosphere: 10⁴ K to 10⁶ K

Corona: A few million K

To know more about temperature visit :-

https://brainly.com/question/26866637

#SPJ1

Answer:

962.32 or 962320 if it's 4184j per cal

Explanation:

1cal = 4.184j

Balancing equation [tex]Fe + O_2 = Fe_2O: 4 Fe + 3 O_2 = 2 Fe_2O_3[/tex]

The number of molecules of [tex]Fe_2O[/tex] produced from 3.5 g of Fe:

[tex]1.88 * 10^{22} molecules[/tex] and from 2.28 g  [tex]O_2[/tex] is [tex]2.86 * 10^{22[/tex] molecules.

We need to first convert mass of Fe to moles, using its molar mass  55.85 g/mol:

moles of Fe [tex]= 3.5 g / 55.85 g/ mol = 0.0626\ mol[/tex]

We can see that 2 moles of [tex]Fe_2O[/tex] are produced for every 4 moles of Fe, or equivalently, 1 mole  [tex]Fe_2O[/tex] is produced for every 2 moles Fe.

Therefore, the number of moles of [tex]Fe_2O[/tex] produced from 0.0626 mol of Fe is:

moles of [tex]Fe_2O[/tex] = 0.0626 mol / 2 = 0.0313 mol

We can use Avogadro's number:

[tex]1 mol = 6.022 * 10^{23}\ particles[/tex]

number of molecules  [tex]Fe_2O[/tex] =[tex]0.0313\ mol * 6.022 * 10^{23[/tex]

molecules/mol = [tex]1.88 * 10^{22[/tex] molecules

Converting mass of [tex]O_2[/tex] to moles:

moles of [tex]O_2[/tex] =[tex]2.28 g / 32.00 g/mol = 0.0713 mol[/tex]

Number of moles of [tex]Fe_2O[/tex] produced from 0.0713 mol of [tex]O_2[/tex] is:

moles of [tex]Fe_2O[/tex] =[tex]2/3 * 0.0713\ mol = 0.0475\ mol[/tex]

number of molecules of [tex]Fe_2O[/tex] = [tex]0.0475\ mol * 6.022 * 10^{23[/tex]

molecules =[tex]2.86 * 10^{22} molecules[/tex]

To know more about Avogadro's number, here

brainly.com/question/1445383

#SPJ1

Answer:

When nitric acid (HNO3) is electrolyzed using graphite electrodes, the following ions are present:

Nitrate ions (NO3-): These are negatively charged ions that are formed from the dissociation of nitric acid. During electrolysis, they will move towards the positively charged anode.

Hydrogen ions (H+): These positively charged ions are also formed from the dissociation of nitric acid. During electrolysis, they will move towards the negatively charged cathode.

Water molecules (H2O): Small amounts of water may also be present in the nitric acid solution, and they will also be involved in the electrolysis process. The water molecules can be oxidized at the anode to form oxygen gas and positively charged hydrogen ions (H+).

To calculate the value of H in J/mole: H value in J/mole (q / moles NaOH): [q] / ([mass of 2.5 mL (or 12 teaspoon) lye] / 40.0 g/mol).

Based on the given procedures, record the following information:

Mass of 2.5 mL (or ½ teaspoon) of lye: [missing, needs to be measured]

Volume of vinegar: 100.0 mL

Initial temperature of vinegar: [measurement needed]

Final temperature of vinegar: [measurement needed]

Specific heat of vinegar (c): 4.1 J/g oC

Density of vinegar: 0.99 g/mL

To calculate the mass of 2.5 mL of lye, to measure it using a scale. Once we have that measurement, we can proceed with the calculations:

Mass of 2.5 mL (or ½ teaspoon) of lye: [measurement needed]

Volume of vinegar: 100.0 mL

Initial temperature of vinegar: [measurement needed]

Final temperature of vinegar: [measurement needed]

Specific heat of vinegar (c): 4.1 J/g oC

Density of vinegar: 0.99 g/mL

To calculate the energy gained by the contents of the calorimeter (q), we can use the formula q = mc∆T, where q is the energy gained, m is the mass of the contents (vinegar + lye), c is the specific heat capacity of vinegar, and ∆T is the change in temperature (final temperature - initial temperature):

Mass of 100.0 mL of vinegar (multiply by density of vinegar): 99.0 g

Mass of contents (vinegar + lye); this is m in our equation: 99.0 g + [mass of 2.5 mL (or ½ teaspoon) of lye]

Change in temperature (Final – Initial), this is ∆T in our equation: [Final temperature] - [Initial temperature]

Energy gained by the calorimeter contents (this is q): q = (99.0 g + [mass of 2.5 mL (or ½ teaspoon) of lye]) x 4.1 J/g oC x ([Final temperature] - [Initial temperature])

To calculate the moles of NaOH, we need to convert the mass of lye used to moles using the molar mass of NaOH (40.0 g/mol):

Moles of NaOH (assumes all of the lye is NaOH): [mass of 2.5 mL (or ½ teaspoon) of lye] / 40.0 g/mol

Finally, to determine the value of ∆H in J/mole, divide the energy gained by the calorimeter contents (q) by the moles of NaOH:

Value of ∆H in J/mole (q / moles of NaOH): [q] / ([mass of 2.5 mL (or ½ teaspoon) of lye] / 40.0 g/mol)

Find out more on specific heat capacity here: https://brainly.com/question/16559442

#SPJ1