400 kg is the weight of a cubic meter of cork and lifting it is impossible.
To find the weight of a cubic meter of cork, we need to multiply its density by the volume. In this case, the density is given as 400 kg/m³, and the volume is 1 cubic meter. Here's the calculation:
Weight = Density × Volume
Weight = 400 kg/m³ × 1 m³
Weight = 400 kg
The weight of a cubic meter of cork is 400 kg.
As for lifting it, that would depend on your physical capabilities. For most people, lifting 400 kg is not possible without the help of specialized equipment.
To learn more about density, refer:-
https://brainly.com/question/952755
#SPJ11
The weight of a cubic meter of cork can be calculated using the given density of 400 kg/m³. A very strong individual or a team of people working together might be able to lift it, though it would still be a challenging task to find the weight, you simply multiply the volume (1 cubic meter) by the density:
Weight = Volume × Density
Weight = 1 m³ × 400 kg/m³
Weight = 400 kg
So, the weight of a cubic meter of cork is 400 kg. Whether or not you could lift it depends on your physical strength. The average person would likely struggle to lift this weight, as it's well above the recommended limit of 25 kg for manual lifting according to health and safety guidelines.
To know more about cubic meter refer here:
https://brainly.com/question/30344308#
#SPJ11
Operators must have unobstructed access to a ladder for escape from a trench within what distance?
a) 15 feet
b) 20 feet
c) 25 feet
d) 30 feet
Operators must have unobstructed access to a ladder for escape from a trench within a distance of 25 feet.
According to OSHA regulations, operators must have unobstructed access to a ladder for escape from a trench within 25 feet. So, the correct answer is c 25 feet.
According to OSHA Occupational Safety and Health Administration, employers must provide ladders, steps, ramps, or other safe means of egress for workers working in trench excavations 4 feet 1.22 meters or deeper1. The means of egress must be located so as not to require workers to travel more than 25 feet 7.62 meters laterally within the trench1. Therefore, the answer is c 25 feet. Operators must have unobstructed access to a ladder for escape from a trench within 25 feet. So, the correct answer is c 25 feet
learn more about unobstructed here
https://brainly.com/question/4335923
#SPJ11
Question 54 Marks: 1 If the radioactivity of a material is not known, the half-life cannot be determined.Choose one answer. a. True b. False
The given statement "If the radioactivity of a material is not known, the half-life cannot be determined" is (b). false statement because half-life, in radioactivity, is the amount of time needed for half of a radioactive sample's atomic nuclei to decay.
Or, alternatively, the amount of time needed for a radioactive material's rate of disintegrations per second to decrease by half. Cobalt-60, a radioactive isotope used in radiotherapy, has a half-life of 5.26 years, for instance. As a result, after that time, a sample that contained 8 g of cobalt-60 at first would only have 4 g of cobalt-60 and would produce half as much radiation. Only 2 g of cobalt-60 would remain in the sample after an additional delay of 5.26 years.
However, neither the volume nor the mass of the initial sample are shown to decrease because when cobalt decays, unstable cobalt-60 nuclei turn into stable nickel-60 nuclei, which stay with the cobalt that hasn't yet broken down.
To know more about radioactivity
https://brainly.com/question/13072276
#SPJ4
Inertia is an object's natural tendency to remain in constant motion or at rest. An object moving through outer space, for example, will continue moving in one direction and at a constant speed due to its inertia, if no other forces act on it. Why do planets constantly change the direction in which they move
Option B, C, and E are correct. First principle of motion options that address the issue include Before an item may move, it must be subjected to a net force. The inertia rule is another term for the first principle of Newton's theory of motion.
InertiaNewton's fundamental law holds valid whether or not an object is moving. Newton's first law can be viewed as the law of inertia. It helped us understand that when a body is at rest, it will remain immobile unless an external force is added to it, or that if a body is moving at a constant rate, it will continue to move until an external force is applied to it.Only when a net force is applied will a body move from its resting state. This law is demonstrated whenever a passenger in a car fastens their seat belt. This rule applies to both stationary and moving items. Thus, alternatives B, C, and E are correct.For more information on inertia kindly visit to
https://brainly.com/question/3268780
#SPJ1
Complete question: Inertia is an object's natural tendency to remain in constant motion or at rest. An object moving through outer space, for example, will continue moving in one direction and at a constant speed due to its inertia, if no other forces act on it. Why do planets constantly change the direction in which they move?
A. Most planets do not have any inertia, so their motion constantly changes.
B. The force of gravity acts on planets and changes the direction of their motion.
C. Each planet's inertia is constantly changing from one moment to the next.
D. There are no forces acting on the planets as they move in orbits around the Sun.
electric wires can be covered with a material that does not transmit electricity, such as rubber or plasitic coating thei materical is known as
The material used to cover electric wires and prevent the transmission of electricity is known as an insulator. Insulators are typically made of materials such as rubber, plastic, or glass.
Insulators are important for protecting people and objects from electrical shock and preventing electrical fires. Without insulation, electricity would be able to flow freely through wires, posing a significant safety risk.
In summary, the material used to cover electric wires and prevent the transmission of electricity is known as an insulator, which is essential for safety in electrical systems.
To know more about electrical systems visit
https://brainly.com/question/30387579
#SPJ11
The grounded neutral of a balanced 3-wire delta circuit or balance 4 wire wye circuit (is)(is not) considered a current carrying conductor. true or false
False. The grounded neutral of a balanced 3-wire delta circuit or balanced 4 wire wye circuit is not considered a current carrying conductor.
Current flows through the phase conductors in the circuit, and the grounded neutral serves as a reference point and a path for fault current to return to the source.
In a balanced system, the currents in each phase are equal in magnitude and evenly distributed, resulting in a net current of zero in the neutral conductor. Therefore, the grounded neutral is not considered a current-carrying conductor in this situation. It is typically used as a reference point for voltage measurements and as a return path for unbalanced current in the circuit. The current is carried by the other two or three conductors in the circuit.
Learn more about conductor here:
brainly.com/question/30583226
#SPJ11
Can somebody please help me with this project??
When a wave encounters a new medium, two events are possible. The wave may pass into the new medium and it may bounce off the new medium. This experiment will allow you to explore the Law of Reflection and how it applies to waves as they bounce off the new medium.
Make observations and measurements to determine the validity of the Law of Reflection.
Questions:
1. What did you notice about the angle of incidence and the angle of reflection?
2. Do you believe this relationship between incident and reflected angles would occur even if the medium interface were curved, like a curved mirror?
Justify your responses.
Be sure to follow proper safety precautions when working with a light source, and handle the flat surface (new medium) carefully to avoid any damage or injuries.
What is Reflection?
Reflection is a phenomenon that occurs when a wave, such as light or sound, strikes a surface and bounces back, either returning to the same medium or entering a new medium. It involves the change in direction of a wave as it encounters a surface, resulting in the wave bouncing off the surface and changing its direction.
A light source (e.g., a flashlight or a laser pointer)
A flat surface to act as the new medium (e.g., a piece of glass or a mirror)
A protractor or an angle-measuring tool
A ruler or a measuring tape
Learn more about Reflection from the given link
https://brainly.com/question/29139385
#SPJ1
The angle of incidence and angle of reflection are equal, according to the law of reflection.
Define angle of incidence and angle of reflection.
The angle between this normal and the incident beam is known as the angle of incidence, and the angle between this normal and the reflected ray is known as the angle of reflection. The angle of incidence and angle of reflection are equal, according to the law of reflection.
According to the Law of Reflection, the angle of incidence and the angle of reflection, as measured from the normal to the surface, are equal. Curved surfaces are irrelevant since the angles are calculated from the normal, which is perpendicular to the surface. This is the foundation for curved mirrors like concave and convex ones.
To learn more about law of reflection use:
https://brainly.com/question/31389010
#SPJ1
which TWO STATEMENTS describe how convection currents transfer thermal energy in earths oceans.
a, warm, low density water rises t the oceans surface.
b, cool low density water rises to the earths surface.
c, cool high density water sinks to the oceans bottom.
d, warm high density water sinks to the oceans bottom.
Warm and low-density water rises to the ocean surface.
Convection is the movement of a liquid or gas that allows thermal energy to be transferred.
Through the mechanism of convection, thermal energy can also travel within the ocean and the atmosphere.
In order to produce temperature differences, convection relies on regions of a liquid or gas heating up or cooling down faster than those around them. Then, as a result of these temperature differences, the areas migrate as the hotter, less dense areas rise and the cooler, denser, sink.
To learn more about convection, click:
https://brainly.com/question/16635311
#SPJ1
emission nebulae produce ____________ spectra. group of answer choices thermal continuous emission absorption dark
Emission nebulae produce emission spectra. These spectra are characterized by bright, colorful lines that correspond to the specific wavelengths of light that the content loaded in the nebula is emitting.
This is in contrast to absorption spectra, which are produced when light from a source passes through a cooler, less dense gas or material, and certain wavelengths are absorbed, resulting in dark lines. Emission spectra are the patterns of light emitted by atoms or molecules when they are excited or heated. When energy is added to an atom or molecule, such as by heating it or by exposing it to an electrical discharge, its electrons become excited and move to higher energy levels. As these electrons fall back down to lower energy levels, they release energy in the form of light. Each element or molecule has a unique set of energy levels and corresponding wavelengths of light that it can emit. Therefore, the emission spectrum of a substance is like a fingerprint that can be used to identify it. Emission spectra are important in many fields, including astronomy, chemistry, and physics. In astronomy, scientists use the emission spectra of stars to determine their composition and temperature. In chemistry, emission spectra are used to identify unknown substances and to study the behavior of molecules. In physics, emission spectra provide insights into the quantum mechanics of atoms and molecules.
Learn more about emission spectra here:
https://brainly.com/question/18907409
#SPJ11
Emission nebulae are vast regions of ionized gas that emit light in a variety of colors.
These nebulae are formed due to the intense radiation emitted by nearby stars, which ionizes the gas in the nebula and causes it to emit light.
The light emitted by emission nebulae produces a distinct type of spectrum known as an emission spectrum.
An emission spectrum is produced when an object emits light at specific wavelengths or frequencies. In the case of emission nebulae, the ionized gas in the nebula emits light at specific wavelengths, depending on the elements present in the gas.
Each element emits light at a unique set of wavelengths, which produces a unique emission spectrum.
The emission spectrum of an emission nebula is characterized by bright lines at specific wavelengths.
These lines are called emission lines and are produced when electrons in the ionized gas transition from a higher energy level to a lower energy level, emitting light at a specific wavelength.
In summary, emission nebulae produce an emission spectrum characterized by bright emission lines at specific wavelengths. This spectrum provides valuable information about the composition and physical properties of the ionized gas in the nebula.
To know more about Emission nebulae here
https://brainly.com/question/11539002
#SPJ11
11) The primary way that we observe the atomic hydrogen that makes up most of the interstellar gas in the Milky Way is with A) ground-based visible-light telescopes.
B) space-based ultraviolet telescopes.
C) X-ray telescopes.
D) radio telescopes observing at a wavelength of 21 centimeters.
D) radio telescopes observing at a wavelength of 21 centimeters are the primary way that we observe the atomic hydrogen that makes up most of the interstellar gas in the Milky Way.
This is because hydrogen atoms are able to emit radiation at a wavelength of 21 cm, and radio telescopes are able to detect this radiation. By measuring the intensity of the radiation, astronomers can measure the amount of hydrogen in different regions of the Milky Way. By measuring the intensity of this emission line, astronomers can map out the amount of neutral hydrogen gas in the Milky Way, including its distribution and motion.
Learn more about emission Refer: https://brainly.com/question/14457310
#SPJ11
List 3 requirements that capacitance of capacitors depends on
Capacitance of capacitors depends on several factors. Here are 3 key requirements that influence capacitance: Surface Area , Distance between Plates , Dielectric Material.
1. Surface Area: Capacitance is directly proportional to the surface area of the capacitor's conductive plates. Larger surface areas allow for more charge to be stored, which increases the capacitance value.
2. Distance between Plates: Capacitance is inversely proportional to the distance between the capacitor's plates. As the distance between the plates decreases, the electric field strength between them increases, leading to a higher capacitance value.
3. Dielectric Material: Capacitance is also dependent on the dielectric material (insulator) placed between the plates. The dielectric constant of the material determines its ability to store electric charge, and a higher dielectric constant results in a higher capacitance value.
learn more about Capacitance Refer: https://brainly.com/question/28445252
#SPJ11
A series LRC circuit has a sinusoidal voltage supplied to it at 197 kHz with a peak voltage of 270 V, a 41-kΩ resistance, a 14-μF capacitor, and a 63-H inductance. What is the peak current for this circuit?A) 3.5 μA B) 2.3 μA C) 4.2 μA D) 6.6 μA
The peak current for this circuit is A. 3.5 μA
To find the peak current in a series LRC circuit with given values, we first need to determine the impedance (Z) of the circuit. We can use the following formula,
Z = √(R² + (XL - XC)²)
where,
R = resistance,
XL = inductive reactance
XC = capacitive reactance.
We can calculate the XL and XC as follows,
XL = 2 * π * f * L
XC = 1 / (2 * π * f * C)
The given values are:
f = 197 kHz (frequency)
R = 41 kΩ (resistance)
C = 14 μF (capacitance)
L = 63 H (inductance)
Now, we can calculate XL and XC:
XL = 2 * π * 197000 * 63 ≈ 77.5 MΩ
XC = 1 / (2 * π * 197000 * 14 * [tex]10^{(-6)}[/tex]) ≈ 57.4 Ω
Next, we find the impedance (Z):
Z = √((41000)² + (77500000 - 57.4)²) ≈ 77.5 MΩ
Now we can calculate the peak current (I_peak) using Ohm's Law:
I_peak = V_peak / Z
I_peak = 270 V / 77.5 MΩ ≈ 3.48 μA
Therefore, the peak current for this circuit is approximately 3.5 μA, which corresponds to option A.
Know more about Inductive reactance here :
https://brainly.com/question/31494607
#SPJ11
as association class is frequently required for what kind of relationship?
An association class is frequently required for a "many-to-many" relationship.
In this type of relationship, multiple instances of one class are related to multiple instances of another class, and the association class is used to model additional information or attributes specific to the relationship between the instances of the two classes involved.
In object-oriented programming, an association class is a class that represents an association between two or more classes. It is frequently used to represent a "many-to-many" relationship between objects, where each object in one class can be associated with many objects in another class, and vice versa.
For example, consider a database of students and courses. Each student can take multiple courses, and each course can have multiple students. The relationship between the Student and Course classes would be a many-to-many relationship, and an association class could be used to represent the relationship between the two classes. The association class might contain additional information about the relationship, such as the student's grade in the course or the date the student enrolled in the course.
The complete question is:-
As association class is frequently required for what kind of relationship?
a. zero to one c. many to many
b. one to many d. zero to many
To learn more object-oriented programming, refer:
https://brainly.com/question/26709198
#SPJ11
An association class is frequently required for many-to-many relationships between classes in object-oriented programming.
step by step explanation :
1) In object-oriented programming, classes represent objects and their attributes and behaviors. A class can have a relationship with another class.
2) A many-to-many relationship between two classes means that one object of class A can be associated with multiple objects of class B, and one object of class B can be associated with multiple objects of class A.
3) In addition, the association itself may also have additional attributes or behaviors that are specific to the relationship between A and B. These attributes and behaviors cannot be adequately represented using simple class relationships.
4) An association class is a separate class that is used to represent this many-to-many relationship between A and B, and to capture the additional attributes and behaviors associated with the relationship.
5) The association class is then linked to the classes A and B using association relationships. This allows us to represent the many-to-many relationship more accurately and also provides greater flexibility in terms of defining the relationship.
6) The association class can be used to represent relationships between any two classes that have a many-to-many relationship with each other, and where the relationship itself has additional attributes or behaviors.
7) For example, consider a system for a library. A book can be borrowed by many different users, and a user can borrow many different books. An association class, such as "borrowing", could be used to represent this relationship, and it may have attributes such as the borrowing date and the due date.
8) Another example of using an association class would be a system for a social network, where a user can have many friends, and each friend can be associated with many users. An association class, such as "friendship", could be used to represent this relationship, and it may have attributes such as the date the friendship was established or the level of closeness between the friends.
In summary, an association class is required for many-to-many relationships where additional attributes or behaviors are associated with the relationship between two classes.
To know more about many-to-many relationships :
https://brainly.com/question/30295270
#SPJ11
the ideal efficiency of a heat engine between 2950k and 318k is
The ideal efficiency of a heat engine operating between a hot reservoir at 2950K and a cold reservoir at 318K is 0.8925 or 89.25%.
The ideal efficiency of a heat engine is given by the Carnot efficiency formula, which depends on the temperature of the hot reservoir and the temperature of the cold reservoir.
In this case, the hot reservoir temperature is 2950K and the cold reservoir temperature is 318K.
The Carnot efficiency formula is:
Efficiency = 1 - (T_cold/T_hot)
where T_cold is the temperature of the cold reservoir and T_hot is the temperature of the hot reservoir.
Plugging in the given temperatures, we get:
Efficiency = 1 - (318/2950)
Simplifying this expression, we get:
Efficiency = 0.8925
Therefore, the ideal efficiency of a heat engine operating between a hot reservoir at 2950K and a cold reservoir at 318K is 0.8925 or 89.25%.
This means that the engine can convert 89.25% of the heat energy it receives from the hot reservoir into useful work, while the remaining 10.75% is rejected to the cold reservoir.
It is important to note that this is the theoretical maximum efficiency of a heat engine, and in reality, no engine can achieve this ideal efficiency due to factors such as friction and heat loss.
However, the Carnot efficiency provides a useful benchmark for evaluating the performance of real-world heat engines.
To know more about ideal efficiency :
https://brainly.com/question/11752408
#SPJ11
37. A satellite follows a circular path with constant speed around a planet. Which one of the following quantities is constant and non-zero for this satellite?
A) linear velocity
B) angular velocity
C) centripetal acceleration
D) angular acceleration
E) total acceleration
B) angular velocity. When the speed of the satellite follows a circular path around a planet, its velocity remains constant but its direction changes constantly. This means that the satellite has a non-zero angular velocity, which is the rate at which the satellite rotates around the planet.
The linear velocity, or the speed of the satellite, is also constant but its direction changes constantly as well. The centripetal acceleration is the force that keeps the satellite moving in a circular path, and it is directed towards the center of the circle. This acceleration changes the direction of the satellite's velocity but not its speed. The angular acceleration is the rate at which the angular velocity of the satellite changes, and it is zero in this case because the satellite has a constant angular velocity. The total acceleration of the satellite is the vector sum of its centripetal acceleration and any other forces acting on it, but it is not constant and may change in magnitude and direction over time. Therefore, the only quantity that is constant and non-zero for a satellite following a circular path around a planet is its angular velocity.
learn more about speed here
https://brainly.com/question/8518482
#SPJ11
When a rock is 3kg and is 30m above, what was the rock's gravitational potential energy when it is halfway between where you dropped it and the stream?
Answer:
882J
Explanation:
PE=m×g×h
=3kg×9.8m/s^2×30m
=882kgm^2/s^2
=882J
An aluminum beverage can contain 12.0 fluid ounces of liquid. Express this volume inliters. (1 fl oz = 29.6 mL)A) 4.07 × 10-2 L B) 0.355 L C) 0.407 L D) 2.46 L E) 3.55 × 102 L
An aluminum beverage can contains 12.0 fluid ounces of liquid. To convert this volume to liters, first convert fluid ounces to milliliters using the given conversion factor (1 fl oz = 29.6 mL) and then convert milliliters to liters (1 L = 1000 mL):
First, we need to convert 12.0 fluid ounces to milliliters:
12.0 fl oz x 29.6 mL/fl oz = 355.2 mL
Next, we need to convert milliliters to liters:
355.2 mL ÷ 1000 mL/L = 0.355 L
So the answer is option B) 0.355 L.
12.0 fl oz × 29.6 mL/fl oz = 355.2 mL
Now, convert milliliters to liters:
355.2 mL × (1 L / 1000 mL) = 0.355 L
So, the volume of the aluminum beverage can in liters is 0.355 L (Option B).
To know more about Aluminum click here .
brainly.com/question/19761029
#SPJ11
13. Through how many revolutions does the grindstone turn during the 4.0-second interval?
A) 0.64
B) 3.8
C) 4.0
D) 6.4
E) 40
The answer this question, we need to know the number of revolutions per second that the grindstone makes. Let's call this number "r". We can then use the formula number of revolutions = r x time.
The given that the time interval is 4.0 seconds, so we just need to find the value of "r". We know that the grindstone makes 60 revolutions in 1 minute, so it makes r = 60 revolutions / 60 seconds = 1 revolutions / second Now we can plug in our values number of revolutions = 1 revolution/second x 4.0 seconds = 4.0 revolutions So the answer is C 4.0 revolutions. To answer this question, we need to know the rotational speed of the grindstone. Unfortunately, the question does not provide that information. Please provide the rotational speed in revolutions per second or similar units of the grindstone, and I would be happy to help you find the correct answer.
learn more about grindstone here
https://brainly.com/question/15184882
#SPJ11
What is the frequency of light in a vacuum that has a wavelength of 70600 m?
(Choose from the following units: m, hz, m/s, s, degrees, dB)
Your Answer:
The frequency of light in a vacuum that has a wavelength of 70600 m is approximately 4.25 × 10⁻⁶ Hz.
The relationship between the frequency (f), wavelength (λ), and the speed of light (c) is given by the equation:
c = fλwhere c is approximately equal to 3 × 10⁸ meters per second in a vacuum.
Rearranging this equation, we can solve for the frequency:
f = c / λPlugging in the given wavelength of 70600 m, we get:
f = (3 × 10⁸ m/s) / (70600 m) ≈ 4.25 × 10⁻⁶ HzTherefore, the frequency of light in a vacuum that has a wavelength of 70600 m is approximately 4.25 × 10⁻⁶ Hz.
To learn more about frequency of light, here
https://brainly.com/question/13104367
#SPJ1
The Brinell harness number, which normally ranges from HB 50 to HB 750 for metals will ___________ as the sample gets Harder.
The Brinell harness number, which normally ranges from HB 50 to HB 750 for metals will increase as the sample gets Harder.
The Brinell hardness test is a common method used to measure the hardness of metals and other materials. In this test, a hard ball of a known size and material is pressed into the surface of the material being tested with a known amount of force.
The size of the resulting indentation is measured, and the Brinell hardness number is calculated based on the applied force and the surface area of the indentation.
The Brinell hardness number is proportional to the hardness of the material being tested. As the material gets harder, the indentation will be smaller, and the resulting Brinell hardness number will be higher.
Conversely, as the material gets softer, the indentation will be larger, and the resulting Brinell hardness number will be lower. Therefore, the Brinell hardness number will increase as the sample gets harder.
For more question on Brinell harness number click on
https://brainly.com/question/13605853
#SPJ11
Iridium is essentially tied with osmium for the distinction of being called the "densestelement" with a density of 22.5 g/cm3. What would be the mass in pounds of a 1.0 ft ×1.0 ft × 1.0 ft cube of iridium. (1 lb = 453.6 g)A) 1.5 lb B) 5.2 lb C) 6.20 lb D) 1.4 × 103 lb E) 6.4 × 105 lb
The closest answer choice is D) 1.4 × 10^3 lb.
To find the mass of a 1.0 ft × 1.0 ft × 1.0 ft cube of iridium, we need to first convert the volume to cubic centimeters and then multiply it by the density (22.5 g/cm³) to get the mass in grams. Finally, we convert the mass to pounds.
1 ft = 30.48 cm
Volume in cubic centimeters: 30.48 cm × 30.48 cm × 30.48 cm = 28,316.85 cm³
Mass in grams: 28,316.85 cm³ × 22.5 g/cm³ = 637,129.24 g
Mass in pounds: 637,129.24 g × (1 lb / 453.6 g) ≈ 1,404 lb
So, the mass of the cube of iridium is approximately 1.4 × 10³ lb (Option D).
Learn more about density here: https://brainly.com/question/29775886
#SPJ11
A 1400 kg car is traveling at a rate of speed of 32 m/s for 2 hours. For the remaining 3 hours of the trip the car travels at an average rate of speed of 38 m/s. What was the average change in momentum?
The average change in momentum for the car during the trip is 8400 kg·m/s.
What is Momentum?
Momentum is a vector quantity, meaning it has both magnitude and direction. The direction of momentum is the same as the direction of velocity, and its magnitude is proportional to both the mass and the velocity of the object.
Then, we calculate the final momentum of the car during the remaining 3 hours:
Final momentum during the remaining 3 hours = mass × final velocity during the remaining 3 hours = m × v2
Now, we can calculate the average change in momentum:
Average change in momentum = Final momentum - Initial momentum
= (Final momentum during the first 2 hours + Final momentum during the remaining 3 hours) - Initial momentum
= [(m × v2) + (m × v2)] - (m × v1)
= 2m × v2 - m × v1
Plugging in the given values:
Mass of the car (m) = 1400 kg
Initial velocity (v1) = 32 m/s
Final velocity during the first 2 hours (v2) = 38 m/s
Average change in momentum = 2m × v2 - m × v1
= 2 × 1400 kg × 38 m/s - 1400 kg × 32 m/s
= 53200 kg·m/s - 44800 kg·m/s
= 8400 kg·m/s
Learn more about Momentum from the given ink
https://brainly.com/question/18798405
#SPJ1
Because of its _________ internal temperature, a temperature regulator has _________ metabolic rate.A) constant; lowB) constant; highC) variable; lowD) variable; high
Because of its variable internal temperature, a temperature regulator has a variable metabolic rate. The metabolic rate of an organism is closely linked to its internal temperature, as chemical reactions occur at different rates at different temperatures.
When the internal temperature is lower, the metabolic rate will also be lower as chemical reactions occur more slowly. However, when the internal temperature is higher, the metabolic rate will increase as chemical reactions occur more quickly. Therefore, a variable internal temperature will result in a variable metabolic rate.
Because of its constant internal temperature, a temperature regulator has high metabolic rate.
Your answer: B) constant; high.
To know more about Temperature click here .
brainly.com/question/11464844
#SPJ11
Question 4 Marks: 1 A filter of 2 mm of aluminum will absorb the soft, or less penetrating, radiation.Choose one answer. a. True b. False
I am a field physicist and I perform QA measurements of various types of X-ray units. Due to recent changes in legal requirements in my country, we have to provide the radiation output value for each unit tube measured in m Gy MA's at 1 meter from focal spot) at filtration of 2,5 mm Al equivalent. a. True
This unfortunately cannot be directly achieved for interventional radiology units, some CTs and occasionally other types of X-ray units. A filter of 2 mm of aluminum will absorb the soft, or less penetrating, radiation. Aluminum is often used as a filter in radiography because it effectively absorbs low-energy, soft X-rays, while allowing more penetrating, higher-energy X-rays to pass through. This helps improve image quality and reduce patient exposure to unnecessary radiation.
learn more about radiation here
https://brainly.com/question/31561778
#SPJ11
Question 89
Groundwater in the soil travels up through a plant's root system and then comes out from the leaf structure as
a. Transpiration
b. Sublimation
c. Evaporation
d. Condensation
Groundwater in the soil travels up through a plant's root system and then comes out from the leaf structure as a. transpiration.
Transpiration is a vital process in plants, where water is absorbed by roots from the soil, moves up through the plant via the xylem, and eventually evaporates from the leaf surfaces. This process plays a crucial role in regulating water and nutrient uptake, as well as maintaining plant turgor pressure and overall health. Transpiration serves several essential functions, such as cooling the plant, providing the necessary force for water and nutrient uptake, and contributing to the water cycle. It is different from other processes like sublimation, evaporation, and condensation. Sublimation refers to the direct conversion of a solid into a gas without passing through a liquid phase.
Evaporation is the transformation of a liquid into a vapor, typically occurring on the surface of the liquid. Lastly, condensation is the process where water vapor in the air turns back into a liquid state. In summary, transpiration is the process by which groundwater in the soil travels up through a plant's root system and comes out from the leaf structure, playing a vital role in the overall health and function of the plant. Groundwater in the soil travels up through a plant's root system and then comes out from the leaf structure as a. transpiration.
learn more about evaporationhere:
https://brainly.com/question/320765
#SPJ11
The most commonly used meter on small domestic services?
a. Venturi meter
b. Propeller meter
c. Orifice plate meter
d. Nutating disc meter
The most commonly used meter on small domestic services is the d.nutating disc meter.
This type of meter is typically used in residential and small commercial applications to measure the flow of water, gas, or other liquids. The nutating disc meter works by using a disc that rotates within the flow of the liquid being measured. As the disc rotates, it creates a measurable flow that can be used to determine the amount of liquid passing through the meter. One of the reasons why the nutating disc meter is so commonly used is because of its accuracy. These meters are typically very precise and can measure small amounts of liquid with great accuracy. This is especially important in residential applications where water usage is often measured in small increments.
Another advantage of the nutating disc meter is its durability. These meters are typically made from high-quality materials that are designed to withstand years of use without breaking down or wearing out. This is important in residential applications where meters may be exposed to a wide range of environmental factors, such as temperature fluctuations, exposure to sunlight, and other elements. Therefore, the correct answer is option d.
know more about nutating disc meter here:
https://brainly.com/question/31568597
#SPJ11
(110-14(C) Most terminals are rated 60C for equipment 100 ampere and less and 75C for equipment terminals rated over 100 ampere. Regardless of the conductor ampacity, conductors must be sized no smaller than the terminal temperature rating.(True/False)
True. Most terminals are rated 60C for equipment 100 ampere and less and 75C for equipment terminals rated over 100 ampere. Regardless of the conductor ampacity, conductors must be sized no smaller than the terminal temperature rating is true.
Valid. Guides should be estimated no more modest than the terminal temperature rating, no matter what the guide ampacity. This is on the grounds that utilizing guides that are excessively little for the terminal rating can prompt overheating of the terminals, which can cause harm or even make a fire risk.
Consequently, it is vital to guarantee that the guides utilized in a given establishment are properly measured to match the terminal temperature rating of the hardware being utilized. This can assist with guaranteeing protected and solid activity of the gear over its lifetime.
To learn more about conductor ampacity. refer:
https://brainly.com/question/28334519
#SPJ4
Terminal Rating(110-14(C)(1): What is the minimum size THHN conductor that is permitted to terminate on a 70 ampere circuit breaker or fuse? Be sure to comply with the requirements of Section 110-14(c)(1)
To comply with the requirements of Section 110-14(c)(1), the minimum size THHN conductor permitted to terminate on a 70 ampere circuit breaker or fuse is a 4 AWG conductor. This ensures proper terminal ratings and a safe electrical connection.
According to the requirements of Section 110-14(c)(1), the minimum size THHN conductor that is permitted to terminate on a 70 ampere circuit breaker or fuse is #6 AWG copper or #4 AWG aluminum. This is based on the 60-degree Celsius ampacity rating of THHN conductors, which is 65 amperes. However, since the next standard size up from #6 AWG copper or #4 AWG aluminum is #4 AWG copper or #2 AWG aluminum, it is recommended to use those sizes instead to allow for some additional capacity and flexibility in the circuit.
To know more about THHN conductor click here:
https://brainly.com/question/31566503
#SPJ11
Question 19 Marks: 1 A centrifugal pump is limited to use where the lift of the water is not in excess ofChoose one answer. a. 33.9 feet b. 20 feet c. 15 feet d. 90 feet
c: 15 feet. This means that a centrifugal pump would only be effective for lifting water to a height of 15 feet or less. Any lift beyond this height would require a different type of pump or additional equipment to assist with the lifting process.
This type of pump is commonly used in applications such as water treatment plants, HVAC systems, and irrigation systems.
A centrifugal pump is a type of pump that works by using a rotating impeller to create a flow of fluid or gas.
One of the limitations of a centrifugal pump is that it is only effective for lifting fluids up to a certain height, which is known as the pump's maximum lift or head.
It is important to note that the maximum lift of a centrifugal pump can be affected by various factors, such as the pump's size, speed, and design, as well as the properties of the fluid being pumped.
Therefore, it is essential to carefully consider these factors when selecting a pump for a specific application to ensure that it is capable of meeting the required lift and flow rate.
learn more about irrigation systems here: brainly.com/question/25114769
#SPJ11
Explain how the conservation laws apply to the bola as its configuration changes.
As the bola is thrown, its configuration changes, and these conservation laws apply to the system- Conservation of momentum, Conservation of energy, Conservation of angular momentum.
Conservation laws are fundamental principles in physics that state that certain properties of a system remain constant under certain conditions. The conservation laws that are most relevant to the bola are the conservation of momentum, conservation of energy, and conservation of angular momentum.
The bola is a simple weapon consisting of two weights attached to the ends of a rope or cord. As the bola is thrown, its configuration changes, and these conservation laws apply to the system.
Conservation of momentum:
The momentum of the bola is conserved as it moves through the air. Momentum is a vector quantity, which means it has both magnitude and direction. When the bola is thrown, it has a certain momentum in a particular direction. As the bola moves through the air, its momentum remains constant, assuming there are no external forces acting on it. When the bola strikes its target, the momentum is transferred to the target, which experiences a force that causes it to move.
Conservation of energy:
The total energy of the bola is conserved throughout its flight. The bola has both kinetic energy (due to its motion) and potential energy (due to its position in the gravitational field). As the bola moves through the air, its kinetic energy increases while its potential energy decreases, but the total energy remains constant. When the bola strikes its target, some of its energy is transferred to the target, causing it to move.
Conservation of angular momentum:
The bola also possesses angular momentum due to its rotation as it moves through the air. Angular momentum is a measure of the rotational motion of an object. As the bola is thrown, it starts to rotate, and this rotation continues as it moves through the air.
The angular momentum of the bola is conserved, meaning that the rate of rotation remains constant as long as there are no external torques acting on the system. When the bola strikes its target, the angular momentum is transferred to the target, causing it to rotate.
In summary, the conservation laws of momentum, energy, and angular momentum apply to the bola as it changes configuration during its flight. These laws help to explain the behavior of the bola and can be used to predict how it will move and transfer energy and momentum to its target.
learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
if you see a full moon today, what phase would you see one week later?
Answer: If you see a full moon today, in one week you will see the last quarter phase.
Explanation: There are four stages to the moon, each lasting up to one week. These stages are known as: new moon, first quarter, full moon, and last quarter.
Hope this helps!