Answer:
2.3 L
Explanation:
A change in pressure-volume at constant temperature is described by the Boyle's law. The mathematical relationship between initial pressure and volume (P₁ and V₁) and final pressure and volume (P₂ and V₂) is given by:
P₁V₁ = P₂V₂
We have the following data:
initial pressure: P₁= 2.5 atm
initial volume: V₁ = 9.1 L
final pressure: P₂= 9.8 atm
Thus, we introduce the data in the mathematical expression and calculate the final volume V₂, as follows:
V₂ = P₁V₁/P₂ = (2.5 atm x 9.1 L)/9.8 atm = 2.3 L
Therefore, the volume of the canister is 2.3 L.
Annie has a soccer ball and a kickball. She kicks each ball with the same force. The soccer ball accelerates at 3 m/s2, and the kickball accelerates at 5 m/s2. Use Newton’s laws to describe why the kickball has a greater acceleration.
Also sorry its actually science
if there is a bottle of grape juice with 20% juice and there is 1000mL of total drink, how many mL of water
is in the bottle?
Answer:
760ml of water
Explanation:
Answer: 800mL
Explanation:
20% of 1000mL is 200. 1000mL - 200mL is 800mL
Make up a short story to explain jays speed and acceleration change throughout his walk. Make sure to address parts A-D
Answer:
Speed of jays increases first, again increases, decreases and then increases.
Explanation:
The speed of jays increases while moving from rest to point A and no acceleration due to constant speed. From point A to point B, the speed is continues to increase and no acceleration. From point B to point C, the speed of jays decreases and acceleration is produced in the journey due to change of speed and from point C to point D, the speed of jays again increases and acceleration is produced due to increasing the speed.
Answer:
The speed of jay's walk increases first, again increases, then it decreases and then increases due to his acceleration walk during parts A-D.
Explanation:
Which bone mineral stores fat?
spongy bone
red bone marrow
yellow bone marrow
hello guys,
differentiate between vapourisation and evaporation
Answer:
vapourisation can occur from solid or liquid into a gas but evaporation is straight from a liquid and is often below boiling temperature while vapourisation is often above boiling temperature
Answer:
[tex] \huge\red{\boxed{\mathfrak{Hello}}}[/tex]
[tex]\underline\blue{\textsf{\textbf{Question-}}}[/tex]
Differences between Vaporization & Evaporation:-[tex]{\huge\pink{\fbox{{࿐αɴѕωєя࿐}}}}[/tex]
[tex] \huge\green{ \mid{ \underline{ \overline{ \tt PARAMETERS: }} \mid}}[/tex]
DefinitionTransition of stateSpeed of processEffect areaMovement of molecule[tex] \huge\purple{ \mid{ \underline{ \overline{ \tt VAPORIZATION: }} \mid}}[/tex]
It is defined as the transitional phase of a compound or an element at the boiling temperature.It changes the state of matter from a solid or liquid to a gas.It is generally happening at a fast pace and also it needs less amount of energy.During the vaporization process, all of the water turns into a gas.During vaporization, molecules may come from below the surface of liquid also.[tex] \huge\orange{ \mid{ \underline{ \overline{ \tt EVAPORATION:}} \mid}}[/tex]
It is nothing but a special kind of vaporization and mostly occurring at the temperature below the boiling point.It changes the liquid state of the matter directly into a gas.It is generally a slower process that needs more energy.During the evaporation process, only the top level of water turn into gas.During evaporation, molecules vaporize from the surface of liquid only.➳ ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \huge\pink{ \mid{ \underline{ \overline{ \tt ꧁❣ RainbowSalt2222 ࿐ }} \mid}}[/tex]
How many joules are required to change 40 grams of water to steam at the boiling point?
Answer:
2260 J
Explanation:
For water at its boiling point of 100 ºC, the heat of vaporization is 2260 J g-1. This means that to convert 1 g of water at 100 ºC to 1 g of steam at 100 ºC, 2260 J of heat must be absorbed by the water.
Para que sirven los modelos atómicos
Answer:
mi no speak espanol
Explanation:
The molar mass of copper (I) carbonate is
Answer:
[tex]\huge\colorbox{violet}{✏﹏ \: ᴀɴsᴡᴇʀ \: }[/tex]
➳The molar mass of copper (I) carbonate is 187.1 g/mol
[tex] \huge\blue{ \mid{ \underline{ \overline{ \tt ꧁❣ ʀᴀɪɴʙᴏᴡsᴀʟᴛ ²²²² ࿐ }} \mid}}[/tex]
What happens when water is added to quicklime? Write two observations.
Answer:
1.Most metal oxides are insoluble in water but some of these (e.g. Na2O.
Explanation:
2.: (i) A hissing sound is observed.
1.ii) The mixture starts boiling and lime water is obtained.
9. The verb corrode means 'wear away gradually, usually by a chemical reaction." A metal
that is prized for its "resistance to corrosion" has what property?
A metal that is prized for its resistance to corrosion has what property?
Answer:
The metal has a high resistance to corrosion, meaning it is more durable and will nor rust easily.
Explanation:
The verb "corrode" means the condition of being damaged easily. In other words, it means that the metal or item gets worn out easily and is not long-lasting.
So, when metal is prized for its resistance against corrosion, it means that the metal is strong and does not wear out easily. It can outstand and withheld the corrosion effect longer. This means that the metal is durable and will not corrode easily.
Which fraction contains the largest molecules?
A) diesel
B)gasoline
C)kerosene?
Explain how the digestive/excretory system is similar to a recycling center
Answer:
The digestive system is a system where our body breaks down food to acquire important nutrients. This is the same as your local recycling center because they collect and breaks the plastic down to be reused into recycled products.
The excretory system is a system where we remove excess unnecessary materials. This can be the same as the recycling center because they remove unnecessary materials (such as trash that is not meant to be recycled).
If 4.04g of h2 gas react with oxygen gas to create 36.36g of water, how many grams of oxygen reacted?
Answer:
gO₂ = 32.32 g
Explanation:
In this case, let's write the general equation:
2H₂ + O₂ -------> 2H₂O
In this case, we can use the 1° law, which is mass conservation. If the product has 36.36 g of water, then in the reactants we should have the same 36.36 g.
According to this, we already have 4.04 of hydrogen, then the remaining to reach the 36.36 g would be:
gO₂ = 36.36 - 4.04
gO₂ = 32.32 gHope this helps
The pressure of a gas is 750 torr when its volume is 400. ml. Calculate the
pressure in atm if the gas is allowed to expand to 600.0 mL at a constant
temperature.
a. 0.66 atm
b. 1.5 atm
c. 500. atm
d. 1130 atm
Answer:
a. 0.66 atm
Explanation:
Pi = 750 torr = 0.99 atm. Pf = ?
Vi = 400 ml Vf = 600ml
Using PiVi = PfVf
Then 400ml × 0.99atm = Pfatm × 600ml
Solving for Pf, we have,
Pf = (400ml × 0.99atm)/600ml
Pf = 0.66atm
Why is CaCl, called "calcium chloride" but SCl, is called sulfur
dichloride?
Answer:
because Sulphur is written as S₂
Explanation:
how many molecules of CO2 would 700g be?
Answer:
13
Explanation:
Which of the following can be classified as a good conductor of thermal energy?
plastic
wood
rubber
copper
I need help with Hess law
Answer:
The energy changes in converting reactants to products is the same regardless of the route by which the chemical changes occur.
The first medical encyclopedia was written by an Arab scholar. Please select the best answer from the choices provided T F
Answer:
True
Explanation:
Asclepius known as the God of medicine, it is said to be healing in ancient Greek religion thag stands for thd healing aspect of the medical arts.
Medical encyclopedia is referred to as a general reference information that is used as sorting out medical related issues. It is a compilation of well written book or document that consists lf information that are related to diseases, medical cases, different tests, symptoms of the ailments, injuries, surgeries etc. and the documents have an a well broad photos of medicine-related photographs and others.
Answer:
T
Explanation:
Which element has the highest electronegativity?
Answer:
fluorine
Explanation:
Answer:
The element with the highest electronegativity is fluorine with a score of 4.0 (which is the highest possible)
Explanation:
I personally haven't gotten this question yet so I hope this helps you!
HELLLLLLPPPPP
What type of circuit does this figure represent?
an open series circuit
an open parallel circuit
a closed parallel circuit
a closed series circuit
Electricity and magnetism
Answer:
a closed series circuit
Answer:
An open series circuit
Explanation:
I'm late but for future people...
I took the test.
A solution of KOH is prepared with a [OH-] concentration of 3.3 × 10-2 M. Calculate [H+], pH, and identify whether the solution is acidic, basic, or neutral.
Answer:
[H⁺] = 3.03x10⁻¹³ MpH = 12.52The solution is basicExplanation:
We can first calculate [H⁺] by using the formula:
[H⁺] * [OH⁻] = 1x10⁻¹⁴[H⁺] * 3.3x10⁻² = 1x10⁻¹⁴[H⁺] = 3.03x10⁻¹³ MNow we proceed to calculate pH:
pH = -log [H⁺]pH = -log (3.03x10⁻¹³)pH = 12.52As the pH is higher than 7, the solution is basic.
If energy was added to solid, what state would it change to
A. Super solid
B. Plasma
C. Liquid
Answer:
Explanation:
The answer is C Liquid
m
Which two types of energy are formed by the transformation shown in the
photo?
O A. Chemical energy - thermal energy
B. Thermal energy - electrical energy
C. Thermal energy - chemical energy
D. Chemical energy - electromagnetic energy
Answer:
D
Explanation:
Hope it helps
#CarryOnLearning
Wat two common uses for Cadmium
Answer:
Common (industrial) uses for cadmium today are in batteries, alloys, coatings (electroplating), solar cells, plastic stabilizers, and pigments
What happen if your Adrenal Glands become overprotective of underproductive?
What happen if your Adrenal Glands become overprotective of underproductive?
Answer: if your adrenals becomes overproductive it will lead to a health issue known as CUSHING'S SYNDROME while when they become underproductive it will lead to a health condition known as ADDISON'S DISEASE.
Explanation:
The adrenal glands are divided into two embryologically and functionally distinct parts: the adrenal cortex and adrenal medulla.
The adrenal cortex is part of the hypothalamic - pituitary - adrenal endocrine system. Morphologically, the adult adrenal cortex consists of three layers which include:
--> The outer thin layer: this is also called zona glomerulosa. It secrets only aldosterone.
--> The inner two layers: these comprises of the zona fasciculata and zona reticularis. They both form a functional unit and secrete most of the adrenocortical hormones.
The adrenal medulla is the inner part of the adrenal gland which secrets the adrenaline and noradrenaline hormones.thry take part in sympathetic nervous system.
When the adrenal glands become a OVERPRODUCTIVE, the adrenal cortex is highly affected. This may occur due to hyperstimulation of the adrenal gland by adrenocorticotrophic hormone,either from the pituitary gland or from an ectopic source or due to largely autonomous secretion by an adrenal tumor such as an adenoma or carcinoma. The increased endogenous cortisol production leads to a disorder known as CUSHING'S SYNDROME. The clinical and metabolic features include obesity, hyperglycaemia and hypertension.
Also when the adrenal glands become UNDERPRODUCTIVE, a health condition known as ADDISON'S DISEASE may occur. This is cause any the bilateral destruction of all zones of the adrenal cortex, usually as the result of an autoimmune process or mycotic infections. The resulting decrease in cortisol production may lead to clinical features such as hypotension, hypoglycemia, nausea and vomiting.
What are some facts about Radon???
Answer:
It was the fifth radioactive element discovered, and is typically a colorless gas that puts off an insane glow when frozen.
What is the common uses for Manganese????
Calculate the percentage composition of SrBr2
Answer:
64.6% of Br and 35.4% of Sr
Explanation:
The percentage composition is obtained defining the percentage in mass of each atom in a molecule.
To solve this question we must find the mass of each atom in 1 mole:
Molar mass Br: 79.904g/mol
Molar mass Sr: 87.62g/mol
The molar mass of SrBr2 is:
79.904g/mol*2 + 87.62g/mol =
159.808g/mol + 87.62g/mol =
247.428g/mol
The percentage of Br is:
79.904g/mol*2 = 159.808g/mol / 247.428g/mol * 100
= 64.6% of Br
And percentage of Sr is:
87.62g/mol / 247.428g/mol * 100
= 35.4% of Sr
Cuales son los símbolos para representar que una reacción se produce en presencia de;
a) electricidad
b) electrolitos
Answer:
b
Explanation: