Answer:
18.368 Liters
Explanation:
Given that balanced Acetone oxidation,
= C3H6O + 4O2 = 3CO2 + 3H2O
lets assume volume of acetone = 1 liter
mass of acetone = 50 mg
number of moles present = (5*10^-3)g / ( 58.08 ) = 0.0000861 mol
Given that : I mol of ( acetone ) = 4 mol of oxygen
∴0.0000861 mol of acetone = 0.0003444 mol of oxygen
also note that the ratio of air to oxygen is
0.21 mol of oxygen = 1 mol of air
∴ 0.0003444 mol of oxygen = 0.00164 mol of air (0.0003444 / 0.21 )
note : 1 mol at STP = 22.4 L (at STP = Temperature = O°C
Finally the theoretically oxygen demand in liters of air for a 50 mg/L of acetone to decompose
Given that Acetone decompose/degrade completely between 500°C - 600°
we will take 500° for the sake of this calculation
The oxygen demand in liters will be
= 22.4 * 0.00164 * 500 = 18.368 Liters
The theoretical oxygen demand in liters of air for a 50 mg / L acetone solution, to decompose completely is 18.368 Liters.
How we calculate moles?Moles of any substance will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction is:
CH₃COCH₃ + 4O₂ → 3CO₂ + 3H₂O
Given mass of acetone = 50mg = 0.05g
Moles of acetone = 0.05g / 58.08g/mol = 0.0000861 mole
From the stoichiometry of the reaction, it is clear that:
1 mole of CH₃COCH₃ = 4 moles of O₂
0.0000861 mole of CH₃COCH₃ = 4×0.0000861=0.0003444 moles of O₂
We know that ratio of air is:
0.21 mole of oxygen present = in 1 mole of air
0.0003444 mole of oxygen present = in 0.0003444/0.21=0.00164 mole of air
At STP 1 mole of gas is present in 22.4 Liter.
Degradation of acetone takes place in 500°C - 600°C.
Theoretical oxygen demand = 22.4×0.00164×500 = 18.368 Liters
Hence, theoretical oxygen demand is 18.368 Liters.
To know more about theoretical oxygen demand, visit the below link:
https://brainly.com/question/13251445
which two technologies use reflected sound waves
A. Ultrasound imaging B. Sonar C.Radar D. Solar panels
Answer: The answer is B.Sonar and C.Radar
Explanation:
They are both just like an echo which is the main things that uses reflected sound waves. They are basically like synonyms for echo.
A _____ is an area prone to flooding.
A. basin
B. fault line
C. floodplain
D. desert
Answer:
c. floodplain
Explanation:
brainliest please!
Answer:
I think the answer is floodplain.
Explanation:
I hope this helps, have a blessed day.
The difference between a conjugate acid/base pair is
+
o the conjugate acid
o the conjugate base
O one proton
one OH-
Answer:
hola no ablo inglés porfavor
In order to expand agriculture and urban areas to meet increased demand for growing populations, water supplies often have to be diverted. In three to five sentences, construct a potential chain of consequences for what could happen when water is diverted from large bodies like lakes and rivers
Answer:
Decrease occur in the amount and flow of water bodies.
Explanation:
There is decrease in the amount and flow of water from water bodies such as rivers and lakes etc occur when the river is diverted from large water bodies because the water flows to the diverted sides and decrease occurs in the amount of water in the rivers and lakes. Those regions from where this river passes can also be negatively affected due to low amount of water they receives for their daily needs or for cultivation of crops so we can say that this diversion has adverse effect on other populations.
2. C + S → CS2
Reaction Type:
d c a b yfyefegyfyrgfyeerg
How many mole ratios can be written for a chemical reaction involving four substances?
Answer:
12 and 20 moles ratios, respectively.
Explanation:
Note that the number of mole ratios you can write for a chemical reaction involving a total of n substances is (n)(n–1). Thus, for reactions involving four and five substances, you can write 12 and 20 moles ratios, respectively.
*** HOPE IT HELPS! :)
when you rub your sock on carpet then touch a door what happens? what are the charges doing?
different between:Electrovalent bond and covalent bond
Explanation:
electrovalent bond covers single bond.
Covalent bond covers double or more bonds.
Calculate the number of molecules in a 45.6 gram sample of C2H4.
Answer: The number of molecules in a 45.6 gram sample of [tex]C_{2}H_{4}[/tex] are [tex]9.78 \times 10^{23}[/tex].
Explanation:
Given: Mass of [tex]C_{2}H_{4}[/tex] = 45.6 g
Molar mass of [tex]C_{2}H_{4}[/tex] is 28.05 g/mol.
Therefore, number of moles of [tex]C_{2}H_{4}[/tex] are calculated as follows.
[tex]No. of moles = \frac{mass}{molarmass}\\= \frac{45.6 g}{28.05 g/mol}\\= 1.62 mol[/tex]
According to the mole concept, 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] molecules. Hence, number of molecules present in 1.62 mol are calculated as follows.
[tex]1.62 \times 6.022 \times 10^{23}\\= 9.78 \times 10^{23}[/tex]
Thus, we can conclude that the number of molecules in a 45.6 gram sample of [tex]C_{2}H_{4}[/tex] are [tex]9.78 \times 10^{23}[/tex].
What is the amount of moles of NaOH, if the solution molarity is .33 M NaOH in 0.75 L solution
Answer:
The amount of moles of NaOH is 0.0495
Explanation:
Molarity is a measure of concentration that is defined as the number of moles of solute that are dissolved in a given volume.
In symbolic form molarity is presented as:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
Molarity= 0.33 MNumber of moles of solute= ?Volume= 0.75 LReplacing in the definition of molarity:
[tex]0.33 M=\frac{number of moles of solute}{0.75 L}[/tex]
number of moles of solute= 0.33 M* 0.75 L
number of moles of solute= 0.0495 moles
The amount of moles of NaOH is 0.0495
Answer:
0.248 moles of NaOH
Explanation:
Concept of Molarity is mol/L
[x] = 1 M
1 mol of x contained in 1 L of solution. We write molar concentrations between []
M = mol/L then M . L = mol
Our solution is NaOH
0.33 M . 0.75L = mol
This solution contains 0.248 moles of NaOH
You pour 25.0 mL of 6.70 M NaOH stock solution into your beaker. How much water will you have if it is diluted to 3.40 M
solution?
A door is made of solid iron and this one-meter stick. How many kilojoules would it take to be to burn a hole 15 centimeters in diameter?
Answer:
The heat required, to burn a hole 15 cm in diameter through the iron door is 34,370.050 kJ
Explanation:
The information given on the door are;
The thickness of the door, t = One-meter
The diameter of the hole to be burnt out, d = 15 cm = 0.15 m
The latent heat of fusion of iron, [tex]H_f[/tex] = 247 kJ/kg
The density of iron, ρ = 7.874 g/cm³ = 7874 kg/m³
The volume of the iron to be melted off, V = π·d²/4 × t
∴ V = (π × 0.15²/4) × 1 ≈ 0.01767145867
The volume of the iron to be melted off, V ≈ 0.01767145867 m³
The mass of the iron to be melted off, m = ρ × V
∴ m = 7874 kg/m³ × 0.01767145867 m³ ≈ 139.145066 kg
The mass of the iron to be melted off, m ≈ 139.15 kg
The heat required, to melt the mass of iron at the melting point temperature and burn a hole 15 cm in diameter, ΔH, is given as follows;
ΔH = [tex]H_f[/tex] × m
∴ ΔH = 139.15 kg × 247 kJ/kg = 34,370,050 J = 34,370.050 kJ
The heat required, to burn a hole 15 cm in diameter through the iron door ΔH = 34,370.050 kJ.
If I add 25 mL of water to 125 mL of a 0.15 M NaOH solution, what will the molarity of the diluted solution be? (convert mL to L and round answer to 3 decimals)
Answer:
0.75 M
Explanation:
M1 = 0.15 M
V1 = 125 mL or 0.125 L
M2 = Y
V2 = 25 mL or 0.025 L
0.15 M x 0.125 mL = Y x 0.025 L
Y = 0.15 M x 0.125 mL / 0.025 L
Cancel out the mL
Y = 0.01875M / 0.025 L
Y = 0.75M
Answer:
0.125 M
Explanation:
M₁V₁ = M₂V₂
125 mL / 1000 = 0.125 L = V₁
25 + 125 = 150 mL / 1000 = 0.150 L = V₂
0.15 M = M₁
M₁ × V₁ / V₂ = M₂
(0.15) × (0.125) / (0.150) = 0.125 M
0.125 M is the answer
What is the mass of Neon in a sign when the gas tubes have a total volume of 166 mL?
HELP ME PLS ASAP ILL GIVE BRAINLY
Whether you live in a tropical climate, a temperate climate, or a polar climate, you share something with the rest of the world- your climate is influenced by the latitude where you live. Which best describes why latitudes closer to the equator have warmer climates?
Latitudes closer to the equator are at lower elevations than latitudes away from the equator
Latitudes closer to the equator receive more solar energy than latitudes away from the equator
Latitudes closer to the equator are nearer to ocean currents than latitudes away from the equator
Latitudes closer to the equator get more wind carrying energy in the form of heat than latitudes away from the equator
Answer: Latitudes closer to the equator receive more solar energy than latitudes away from the equator
Explanation:
binigyan ang isang liham ng pasasalamat at gagawin ko rin siya ng kabutihan sa ibang pagkakataon
Answer:
what language do you speak?
Explain the term respiration and how this process increases the percentage of carbon dioxide in the atmosphere.
Answer:
Please find the explanation to this question below.
Explanation:
_______ are the paths of objects around the sun.
Answer:
Orbit
Explanation:
when something makes a complete path around the sun it is called an orbit
What is the purpose of a buffer?
Answer: A buffer solution is a solution made to prevent the pH level of something from changing when you add a base or an acid to it. For example, if you put a buffer solution in a pool, and then you put chlorine in it, the chlorine's effect on the PH level will be suppressed.
53 points and brainliest no link pls : in the Contact Process, sulfur dioxide is converted into sulfur trioxide and the following equilibrium is set up: SO2 (g) + O2 (g)--> 2 SO3 (g) ∆H = -27 kJ a) If sulfur dioxide is added to the mixture, what happens to the position of the equilibrium? b) If a catalyst is added to the mixture, what happens to the position of the equilibrium? c) if the pressure was increased in the above reaction, what happens to the position of the equilibrium? *
Answer:
the equilibrium will start to react and give off a gas
the position will start to move
Explanation:
How to search icse board books by name and their solution
Answer:
i really don't know
Explanation:
but if you got an answer please let me know ty:)
Suppose Earth was tilted much less on its axis. What effect would this have on the planet? Please help me !
Answer:
If Earth was tilted much less on its axis, it would lead to minor changes in precipitation and temperatures as Earth moves slightly towards and away from the sun.
Explanation:
If a planet tilts more, it leads to colder winters and warmer summers. However, if a planet tilts less, it leads to less severe seasons that is and milder winters and cooler summers.
If Earth was tilted much less on its axis, it would lead to minor changes in precipitation and temperatures as Earth moves slightly towards and away from the sun.
The symbol for the hydronium ion is
ОН+
ОНЗО-
OH30+
ОН-
Please help
The half life of tritium is 12.3 years. How much sample will remain if you start with 425g of tritium that is found after 4 half lives?
Answer:
26.56g
Explanation:
The half life of an isotope decay is the time transcurred when the initial amount of the isotope decays to the half of its amount.
For the problem, when 1 half life transcur, the sample has a mass of:
425g / 2 = 212.5g
When 2 half lives transcur:
212.5g / 2 = 106.25g
3 half lives:
106.25/2 = 53.13g
And the amount that is found after 4 half lives is:
53.13/2 =
26.56gWhat is one disadvantage of hydroelectric energy?
How much water should be added to 5.00 g of KCl to prepare a 0.500 m
solution? *
Molality = moles of solute
Kg of solvent
100 g
38g
500 g
134 g
Other
Answer:133.4
c
m
3
Explanation: Explanation:
Molarity is number of moles of solute divided by number of litres of solution.
M
=
n
V
Rearrange for V to give
V
=
n
M
Number of moles of KCl is the mass divided by the molar mass of KCl which is 75.5 g/mol, so (5/75.5) = 0.0667 moles.
Now plug in the numbers:
V
=
n
m
=
0.0667
0.5
=
0.1334
litres
So you need to add 0.1334 litres of 133.4
c
m
3
of water.
(NB: symbol for molarity is upper case M. m is metres).
A sample of sulfur dioxide occupies a volume of 6052 mL at 352 K and 892 mm Hg. What volume will the sulfur dioxide occupy at STP?
Answer:
5511.99 mL
Explanation:
Given data
Volume V1= 6052 mL
Temperature T1= 352K
Pressure P1= 892 mm Hg
At STP the parameters of gas are
Temperature T2= 273.15 K
Pressure P2= 760 mmHg
Applying the gas equation
P1V1/T1= P2V2/T2
Substitute to find V2 we have
892*6052/352= 760*V2/273.15
5398384/352= 760*V2/273.15
15336.31= 760*V2/273.15
Cross multiply
15336.31*273.15= 760*V2
4189113.0765= 760*V2
4189113.0765/760= V2
V2= 5511.99 mL
Hence the volume at STP is 5511.99 mL
In a tug of war, the team on the left pulls with a force of 430 N and the team on the right pulls with a force of 420 N. What is the net force on the rope?
A. 10 N to the right
B. 10 N to the left
C. 420 N to the right
D. 430 N to the left
Answor
c
Explanation:
If there are 3 moles of gas A, 4 moles of gas b and 5 moles of gas c I'm a mixture of gases and the pressure A is found to be 2.5 atm, what is the total pressure of the sample of gases
Answer:
Total pressure = 10 atm
Explanation:
The excersise can help to understant the concept of mole fraction
Mole fraction is defined as:
moles of gas / Total moles = pressure of that gas / Total pressure
Both can be summed.
Sum of moles of each gas in the mixture = Total moles
Sum of pressures of each gas in the mixture = Total pressure
Those, are laws for gases.
Total moles: 3 mol of gas A + 4 moles of gas B + 5 moles of C
= 12 total moles
Pressure of A is 2.5 atm.
We replace data at the mole fraction relation
moles of A / total moles = Pressure of A / Total pressure
3 moles / 12 moles = 2.5 atm / Total pressure
Total pressure = 2.5 atm / (3mol/12mol)
Total pressure = 10 atm