What is the potential energy in J of a bungee jumper standing on a 0.109 km bridge that weighs 85 kg?

Answers

Answer 1

Considering the definition of potential energy, the potential energy of the bungee jumper is 90,889.65 J.

Potential energy

Potential energy is the energy that measures the ability of a system to do work based on its position. In other words, this is the energy that a body located at a certain height above the ground has.

Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the strength of gravity.

So for an object with mass m, at height h, the expression applied to the gravitational energy of the object is:

Ep= m×g×h

Where:

Ep is the potential energy in joules (J).m is the mass in kilograms (kg).h is the height in meters (m).g is the acceleration of fall in m/s² (approximately 9.81 m/s²).

Potential energy in this case

In this case, you know:

m= 85 kgg= 9.81 m/s²h= 0.109 km= 109 m (being 1 km= 1000 m)

Replacing in the definition of potential energy:

Ep= 85 kg × 9.81 m/s² × 109 m

Solving:

Ep= 90,889.65 J

Finally, the potential energy of the bungee jumper is 90,889.65 J.

Learn more about potential energy:

https://brainly.com/question/24933254

https://brainly.com/question/15896499

https://brainly.com/question/14456667

#SPJ1


Related Questions

Which part of a laser printer applies a positive charge to the paper that attracts the toner particles to it

Answers

The part of laser printer that applies a positive charge to the paper in order to attract the toner particles is known as transfer roller.

What is a laser printer:

A laser printer is a kind of printer that uses the electrostatic digital printing process to perform printing. It makes use of the static electricity and toner powder in place of liquid ink.

The toner is applied to specific areas which are dependent on the charge difference created or on the static electricity.

Following are the components of a laser printer:

Scanning unit:

        This unit of a laser printer generally consists of a laser diode, a

        scanning motor and a polygon mirror.
        It also consists of two-beam alignment lenses.

Cartridge unit:

        This unit of laser printer consists of three drums, namely primary

        charging roller (PCR), organic photoconductive drum (OPC) , and

        image transfer roller (ITR).
        The transfer roller is also present at a close vicinity of the  

        printer's  toner cartridge.

Fuser assembly unit:

        This unit of laser printer consists of a pressure roller and a fuser                roller, where the fuser roller assembly consists of a heating

        element.

Therefore, the transfer roller unit of a laser printer applies a positive charge to the paper that attracts the toner particles to it.

Learn more about laser printers here:

https://brainly.com/question/5039703

#SPJ4

The positron created in pair production travels a certain distance and loses all of its kinetic energy. It finally annihilates with an electron and releases two photons. What is the angular separation between the two photons

Answers

Answer:

In pair production, after the loss of Kinetic energy, the angular separation between the two photons is 180°.

Explanation:

Pair production is the process of formation of two electrons, one negative and the other positive (positron), from a pulse of electromagnetic energy traveling through matter.

It is a process of direct conversion of radiant energy to matter.

The sum of the Kinetic energies of the formed particles amounts to a value of 4 MeV.

When the kinetic energy is lost, emission of two photons, each with an energy of approximately 1 MeV in the form of gamma rays takes place ( in opposite direction).

Therefore, the angle of separation between the two photons is 180°.

Learn more about electromagnetic energy here:

https://brainly.com/question/9221254

#SPJ4

You push a heavy crate down a ramp at a constant velocity. Only four forces act on the crate. Which force does the greatest magnitude (it does not matter positive or negative) of work on the crate

Answers

The friction force does the greatest magnitude of work on the crate

Consider all four forces. The normal force does no work at all, since there is no motion in the direction of that force, perpendicular to the ramp. The force of gravity is smaller than the force of friction, since you still need to push the crate to get constant velocity. The force of you pushing is also smaller than the force of friction, since you are moving down a ramp, and are therefore assisted by gravity. Therefore the force doing greatest magnitude of work is the force of friction. Note that, even though the frictional work is negative, it still has the greatest magnitude

Learn more about friction force here:

https://brainly.com/question/4618599

#SPJ4

If the mass of the earth and all objects on it were suddenly doubled, but the size remained the same, the acceleration due to gravity at the surface would become.

Answers

When the mass of Earth doubles, acceleration due to gravity doubles as well.

Acceleration due to gravity

Apply Newton's second law of motion;

F = mg --- (1)

where;

m is mass of the objectg is acceleration due to gravity

F = GmM/R²  --- (2)

where;

M is mass of EarthR is radius of Earth

Solve (1) and (2)

mg =  GmM/R²

g = GM/R²

when the mass of Earth doubles, acceleration due to gravity becomes;

g' = G(2M)/R²

g' = 2(GM/R²)

g' = 2g

Thus, when the mass of Earth doubles, acceleration due to gravity doubles as well.

Learn more about acceleration due to gravity here: https://brainly.com/question/88039

#SPJ1

Dinesh takes 20 minutes to cover a distance of 5 km on a bicycle. Calculate his average speed in.

A) 1m/s
B) 2km/h

Please explain in detail.​

Answers

Answer:

Soln:Here

Given,

Distance(s)=5m

Time taken(t)=20min=2400seconds

Speed(s)=?

We know that,

Speed(s)=Distance/timetaken

=5m/2400sec

580m/s

Thus the average speed of his bicycle is 580 m/s..

Thank you...

A block slides down an inclined plane. Which force does zero work? I. Weight II. Friction III. Normal

Answers

II.  The work done by frictional force is zero.

What is work done?

Work is said to be done when an applied force moves an object over a given distance.

Work done by friction = μ(Fn)d

where;

μ is coefficient of frictionFn is normal force

Since the frictional force could not prevent the block from sliding, we can conclude that the work done by frictional force is zero.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

A footballer kicks a ball at angle teta to horizontal with some initial velocity a) what are the two types of independent motion takes place at the same time? b.how long is the ball in the air?

Answers

a) The motion along the vertical direction and the motion along the horizontal direction.

b) The object remains in the air for a time period of 2usin(θ)/g.

Any object that is thrown in the air when gravity is acting on it is called a projectile. The motion of this projectile is called projectile motion.

When the projectile is thrown in the air at some angle θ, then there are two independent motions taking place at the same time. First is the component of motion along the vertical direction along which gravity acts. Second is the component of motion along the horizontal direction along which the object moves with a constant velocity. No force acts along the horizontal direction. The horizontal motion does not affect the vertical motion and the converse is also true. So these are independent of each other.

The time of flight is the time during which a projectile remains in the air. This time of flight is calculated using the formula,

T=2usin(θ)/g

where T is the time of flight, u is the initial velocity and g is the acceleration due to gravity.

Hence, the object remains in the air for a time period of 2usin(θ)/g.

Learn more about projectile.

https://brainly.com/question/11049671

#SPJ4

The speed that a tsunami can travel is modeled by the equation , where s is the speed in kilometers per hour and d is the average depth of the water in kilometers. What is the approximate depth of water for a tsunami traveling at 200 kilometers per hour?.

Answers

The speed of tsunami is a.0.32 km. 

Steps involved  :

The equation s = 356d models the maximum speed that a tsunami can move at. It reads as follows: s = 200 km/h d =?

Let's now change s to s in the equation to determine d: s = 356√d 200 = 356√d √d = 200 ÷ 356 √d = 0.562 Let's square the equation now by squaring both sides: (√d)² = (0.562) ² d = (0.562)² = 0.316 ≈ 0.32

As a result, 0.32 km is roughly the depth (d) of water for a tsunami moving at 200 km/h.

To learn more about tsunami refer : https://brainly.com/question/11687903

#SPJ4

Calculate the speed of sound in air when the temperature is 20°C. 

Answers

343 m/s. You’re welcome

Which class of hazards is characterized by thermal and mechanical hazards in the form of blast pressure waves, shrapnel and fragmentation, and incendiary thermal effects

Answers

Class 1 (Explosives) is the class of hazards that is characterized by thermal and mechanical hazards in the form of blast pressure waves, shrapnel and fragmentation, and incendiary thermal effects.

There are different classes of Hazards

Class 1 - Explosives

Class 2 - Gases

Class 3 - Flammable liquids

Class 4 - Flammable solids

Class 5 - Oxidizers

Class 6 - Toxic materials

Class 7 - Radioactive materials

Class 8 - Corrosive materials

Class 9 - Miscellaneous dangerous goods

Any substance or item, including a gadget, that is intended to function by explosion or that, through a chemical reaction inside itself, is capable of functioning similarly even if not intended to function by explosion, falls within the category of explosive materials (class 1).

Hence, Class 1 (Explosives) is the class of hazards that is characterized by thermal and mechanical hazards.

Learn more about Types of Hazards here https://brainly.com/question/13941479

#SPJ4

A hockey puck with a mass of 160 g is sliding across an empty ice rink. The coefficient of friction between the hockey puck and the ice is 0. 51. The puck travels 47. 7 m before coasting to a stop. What was the initial velocity of the puck?.

Answers

The initial velocity of the hockey puck is obtained as 22 m/s.

What is the frictional force?

The frictional force of the hockey puck is the force that causes it to stop. Now;

Ff = μmg

Ff = 0. 51 * 0.16 Kg * 9.8 m/s^2

Ff = 0.8 N

Now;

F = mv^2/2x

Where;

m = mass

v = velocity

x = distance

v =√ 2xF/m

v = √ 2 * 47.7 * 0.8 / 0.16

v = 22 m/s

Learn more about frictional force:https://brainly.com/question/1714663

#SPJ1

what are the wave model and particle model of light

Answers

Answer:

Newton's corpuscular theory stated that light consisted of particles that travelled in straight lines. Huygens argued that if light were made of particles, when light beams crossed, the particles would collide and cancel each other. He proposed that light was a wave.

A positive charge traveling north enters a region where the electric field is uniform and points east. This charge will Group of answer choices continues with the same speed in the same direction slows down speed up veers east veers west

Answers

Option D is correct : This positive charge will veer east

It is given that the particle has a positive charge.

So, the direction of the force on the positive charge (and also the acceleration) is in the same direction as the electric field.

Now the electric field is uniform and points in east, the force on it [tex]F=qE[/tex]will also be pointed towards the east.

The positive charge was initially moving north, which means that the velocity vector was in the direction of north and when a positive charge first reaches an area with an electric field and force pointing east, its velocity vector will change to be along the electric field, or east.

That’s why a positive charge traveling north enters a region where the electric field is uniform and points east will veer east.

Learn more about electric field here https://brainly.com/question/14372859

#SPJ4

Consider a circuit with a main wire that branches into two other wires. If the current is 10 A in the main wire and 4 A in one of the branches, how much current is in the other branch

Answers

If the primary wire's power is 10 A and one branch's power is 4 A, another branch's power will be 6A.

According to Kirchhoff's current law (KCL), the total current flowing through a parallel route circuit's junction equals the total current flowing away from it.

Provided that one of the two branches through which power exits the intersection has a flow of 4A, and also that the junction's overall flow entering it is 10A, the entire current going the junction should be 10A.

Consequently, the second wire's power may be expressed as;

I = I1+ I2 [ where I= total current (10A);

                I1= current in one branch (4A) &

                I2= current in another branch]

⇒I2 = I - I1

⇒I2 = 10A - 4A

I2 = 6A

Therefore, it can be concluded that when the primary wire bears 10A power having 4A in one of its branches, another branch carries 6A power.

Learn more about Kirchhoff's law here:

https://brainly.com/question/6417513

#SPJ4

Find the Y upon DX for the following functions why is equal to bracket X -1 bracket X -2 upon route x

Answers

Rewrite the equation as

[tex]y = (x-1) (x-2) x^{-1/2}[/tex]

Then by the product rule, the derivative is

[tex]\dfrac{dy}{dx} = (x-2) x^{-1/2} + (x-1) x^{-1/2} - \dfrac12 (x-1) (x-2) x^{-3/2}[/tex]

and we can factorize this as

[tex]\dfrac{dy}{dx} = \dfrac12 x^{-3/2} \left(2 (x-2) x^{3/2-1/2} + 2 (x-1) x^{3/2-1/2} - (x-1) (x-2)\right)[/tex]

[tex]\dfrac{dy}{dx} = \dfrac12 x^{-3/2} \left(2 (x-2) x + 2 (x-1) x - (x-1) (x-2)\right)[/tex]

[tex]\dfrac{dy}{dx} = \dfrac12 x^{-3/2} (3x^2 - 3x - 2)[/tex]

[tex]\dfrac{dy}{dx} = \dfrac{3x^2 - 3x - 2}{2x^{3/2}}[/tex]

and optionally expanded once more (if only to match the provided "Ans") to

[tex]\dfrac{dy}{dx} = \dfrac32 x^{2-3/2} - \dfrac32 x^{1-3/2} - x^{-3/2}[/tex]

[tex]\dfrac{dy}{dx} = \dfrac32 x^{1/2} - \dfrac32 x^{-1/2} - x^{-3/2}[/tex]

[tex]\dfrac{dy}{dx} = \dfrac32 \sqrt x - \dfrac3{2\sqrt x} - \dfrac1{\sqrt{x^3}}[/tex]

If an electron is released at PP , what is the magnitude of the net force that these rods exert on it?

Answers

The magnitude of the net force that the rods exert after an electron is released at point P is 2.885 × 10⁻¹⁵ N.

Given values:

Length of non-conducting rod, l = 1.20 m

Charge on positive rod, +Q = +2.50 μC = +2.50 × 10⁻⁶ C

Charge on negative rod, -Q = -2.50 μC = -2.50 × 10⁻⁶ C

Distance from point P of each rod, x = 60 cm = 0.60 m

Calculation of Net electric force exerted on point P:

Consider an electron released at point P, then the net electric force exerted will be given as:

F = e. E_net       - ( 1 )

Step 1:

The net electric field value is given as:

E_net  = E₁ cos Φ + E₂ cos Φ      

           = 2E₁ cos Φ                  -( 2 )

where, E₁ & E₂ are electric fields due to positive and negative rod                

            respectively.

            Φ is phase angle

Step 2:

The electric field due to positive rod is given as:

E₁ = k (λ/r)             - ( 3 )

where, k is Coulomb's force constant

            λ is linear charge density

            r is distance between point P and half of the rod.

Now, the linear charge density is given as:

λ = Charge/length = Q/x

The value of r is given as:

r = √x²-a²

where, x is length of rod

           a is half length of rod

Applying values in above equation, we get:

r = √x²-(x/2)²

r = √(1.20 m)²-(1.20/2)²

  = √1.08

  = 1.04 m

Substituting all the determined values in equation 3 we get:

E₁ = k (λ/r)

   = k [(Q/x)/r]

   = k [ Q/xr ]

   = (9×10⁹ Nm²/C²) [ |+2.50×10⁻⁶ C|/(1.20 m)(1.04 m)]

   = 1.803×10⁴ N/C

Step 3:

Similarly, the electric field due to negative rod is given as:    

E₂ = k [ Q/xr ]

    = (9×10⁹ Nm²/C²) [ |-2.50×10⁻⁶ C|/(1.20 m)(1.04 m)]

    = 1.803×10⁴ N/C

Step 4:

Consider equation 2:

E_net  = 2E₁ cos Φ

From the figure we get the phase angle as:

Φ = tan⁻¹ (0.60 m/0.60 m)

   = tan⁻¹ ( 1 )

   = π/4  

Now, the electric field produced due to each rod is equal and mutually perpendicular. Thus, the net electric field after applying values can be calculated as:

E_net = 2(1.803×10⁴ N/C) cos π/4

          = 2(1.803×10⁴ N/C) (0.5)

          = 18030 N/C

Step 5:

Consider equation 1 :

F = e. E_net

where, e is charge on an electron

Applying values in above equation we get:

F = (1.6 × 10⁻¹⁹ C)(18030 N/C)

  = 2.885 × 10⁻¹⁵ N

Therefore, the magnitude of the net force that the rods exert after an electron is released at point P is  2.885 × 10⁻¹⁵ N.

Learn more about electric force here:

https://brainly.com/question/1634182

#SPJ4      

The figure below shows a ball on a curved surface. The ball is released at point A. At which point does the ball have maximum gravitational potential energy?

Answers

Answer:

Point A

Explanation:

Because it reaches maximum height

ust before it exploded, the star that became supernova 1987A was a(n) Group of answer choices B3 supergiant. white dwarf. M2 supergiant. pulsar.

Answers

Option (a) B3 supergiant is correct.

Just before it exploded, the star that became supernova 1987A was a B3 supergiant.

Any star with extremely high intrinsic luminosity and relatively vast size is referred to as a supergiant star.

B3 supergiant is a blue supergiant.

An OB supergiant, often known as a blue supergiant (BSG), is a hot, brilliant star like Rigel.

The hottest stars in the universe are blue supergiants, with temperatures ranging from 10,000 K to 50,000 K or higher.

A type II supernova known as SN 1987A occurred in the Milky Way's dwarf satellite galaxy, the Large Magellanic Cloud.

Red supergiants are the most frequent supernova progenitors, and it was once thought that only red supergiants could explode as supernovae. However, because SN 1987A's parent star, was a B3 blue supergiant, this notion had to be reexamined.

Hence, just before it exploded, the star that became supernova 1987A was a B3 supergiant.

Learn more about supernova here  

https://brainly.com/question/933449

#SPJ4

PLEASE HELP! An airplane is moving at a velocity of 90.1 m/s and requires 1435 m to reach that velocity. Determine the acceleration of the plane and the time required to reach this velocity.​

Answers

Answer:

The time required to reach the velocity is 15.9s.

The acceleration of the plane is 5.67m/

Explanation:

Acceleration is solved by the given formula.

Acceleration = velocity ÷ Time

Finding Time

Time = distance ÷ speed

Time = 1435m ÷ 90.1m/s = 15.9s

Finding Acceleration

Acceleration = velocity ÷ time

Acceleration = 90.1m/s ÷ 15.9s = 5.67m/

A sports car starts from rest it covers a distance of 900 m to attain a speed of 80m s determine the acceleration of the car and the time required to reach this speed

Answers

The acceleration of the car and the time required to reach this speed will be 8 m/s² and 10 sec.

What is acceleration?

The rate of velocity change concerning time is known as acceleration.

Given data;

Initial velocity, u=0  m/s

Final velocity, v= 80 m/sec

Distance travelled,s =900m

From Newton's third equation of motion;

v²=u²+2as

a =(v²-u²)/2s

Substitute the given values;

a = (80²-0)/2 ×900

a = 6400/1800

a=8 m/s²

The time required to reach this speed is found in Newton's first equation of motion as;

v = u+at

Substitute the given values;

80 = 0 + 8t

t=80/8

t = 10 sec

Hence, the acceleration of the car and the time required to reach this speed will be 8 m/s² and 10 sec.

To learn more about acceleration, refer to the link https://brainly.com/question/2437624

#SPJ1

A duck flies in a straight line for 500m (60° N of W)
a.) What angle is this in polar coordinates?
b.) What is the North/South and East/West components of its displacement?
Please help me t-t

Answers

(A) The angle of this in polar coordinates is 30⁰.

(B) The North/South and East/West components of its displacement is 250 m and 433 m respectively.

The angle is this in polar coordinates

60° N of W lies in the fourth quadrant;

θ = 90 - 60 = 30⁰

in polar coordinate = (r,θ) = (500 m, 30⁰)

Vertical component of the displacement (North/South)

Dy = D sinθ

Dy = 500 m x sin(30) = 250 m

Horizontal component of the displacement (East/West)

Dx = D cosθ

Dx = 500 m x cos(30) = 433 m

Thus, the angle of this in polar coordinates is 30⁰.

The North/South and East/West components of its displacement is 250 m and 433 m respectively.

Learn more about polar coordinates here: https://brainly.com/question/4522672

#SPJ1

The work that is done when twice the load is lifted twice the distance is _______. View Available Hint(s)for Part A The work that is done when twice the load is lifted twice the distance is _______. the same three times as much twice as much four times as much

Answers

The work that is done when twice the load is lifted twice the distance is

four times as much

The net work performed by forces acting on an object equals the change in kinetic energy, according to the work-energy theorem.

when an item slows down, the net work applied to it decreases, its change in kinetic energy is negative, and its ultimate kinetic energy is less than its starting kinetic energy. When an item accelerates, positive net work is done on it. All the forces acting on an item must be taken into consideration when determining the net work. You will obtain an incorrect result if you exclude any forces that affect an item or if you add any forces that do not affect it.

Hence The work that is done when twice the load is lifted twice the distance is four times as much

Learn more about Work here

https://brainly.com/question/25573309

#SPJ4

A ball rolls from x=3.85m to x=22.1m in 5 seconds. What was its average velocity

Answers

Answer:

Average Velocity = 3.65 m/s

Explanation:

Average Velocity  [tex]=\frac{Total Displacement}{Total Time}[/tex] [tex]=\frac{22.1-3.85}{5}=\frac{18.25}{5}=3.65[/tex]

The average velocity of a ball that rolls from x=3.85m to x=22.1m in 5 seconds is -3.65 m/s.

Given the following values:

Initial position, x = 3.85 m

Final position, x'= 22.1 m

Initial time, t = 0 seconds

Final time, t'= 5 seconds

The average velocity can be computed from the ratio of change in displacement and time.

The average velocity is given as:

v = (x'-x)/(t'-t)

v = (22.1-3.85)/(5-0)

v = -3.65 m/s

Hence, the average velocity of a ball that rolls from x=3.85m to x=22.1m in 5 seconds is -3.65 m/s.

To learn more about Velocity, here:

https://brainly.com/question/17127206

#SPJ3

Suppose you put very large-diameter tires on your car. Then, your speedometer will show a speed that is

Answers

Answer:

The speed registered by the speedometer depends on the rotations of the axle to which it is connected -

Larger diameter tires will contribute to a larger distance traveled in one rotation of the axle and hence a larger speed and the  speed shown on the speedometer will be less than the actual speed.

An object is moving with a force 30N then hits a wall to a stop in 0.5s.
a. Calculate the impulse.
b. What is the change in momentum of the object?​

Answers

The impulse and change in momentum of an object moving with a force 30N then hits a wall to a stop in 0.5s is 15Ns.

How to calculate impulse?

Impulse is the integral of force over time. It is calculated by multiplying the force applied by the time as follows:

∆p = Force × time

According to this question, an object is moving with a force 30N and then hits a wall to a stop in 0.5s.

Impulse = 30N × 0.5s = 15Ns

Therefore, the impulse and change in momentum of an object moving with a force 30N then hits a wall to a stop in 0.5s is 15Ns.

Learn more about impulse at: https://brainly.com/question/16980676

#SPJ1

In a science museum, a 110 kg brass pendulum bob swings at the end of a 13.9 m -long wire. the pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.2 m to the side and releasing it. because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s.
at exactly 12:00 noon, how many oscillations will the pendulum have completed?
what is its amplitude at noon?

Answers

The number of oscillations completed by the pendulum is 2736.

The amplitude of the pendulum is 3.47 m.

The given motion is an underdamped motion. So its frequency will be similar to that of a simple harmonic motion.

The frequency of oscillation is defined as the number of oscillations completed in unit time. It is calculated using the formula.

f=(1/2π)*√(l/g)

where f is the frequency, l is the length of the pendulum, and g is the acceleration due to gravity.

Given the length of the wire l=13.9 m and acceleration due to gravity g=9.8 m/s^2. The frequency of oscillation is:

f=(1/(2*3.14)) * √(13.9/9.8)

f=0.19 Hz (approximately)

Since the pendulum started oscillating at 8:00 am, 4 hours has been passed when it shows 12:00 pm. So time t=4 hours or t=4*3600. Hence t=14400 s. The total number of oscillations is then given by the formula,

n=ft

where n is the number of oscillations.

n=0.19*14400=2736.

In damping motion, the amplitude of the pendulum decreases with time. The amplitude of the pendulum is given by the formula,

A' = A exp (-b*t)

where A' is the amplitude after time t, A is the initial amplitude, b is the damping constant, and t is the time.

Here A=1.2 m, b=0.010 kg/s and t=14400 s.

A' = 1.2 exp (-0.010*14400)

A'=3.47 m (approximately)

Learn more about amplitude.

https://brainly.com/question/21632362

#SPJ4

A positively charged insulating rod is brought close to an object that is suspended by a string. If the object is repelled away from the rod we can conclude:

Answers

Answer: A positively charged insulating rod is brought close to an object that is suspended by a string. If the object is repelled away from the rod, we can conclude that the object is positively charged.

Explanation: To find the answer, we need to know more about the Electric charges and its properties.

What is meant by electric charge?It can be defined as the basic fundamental property of matter causes to experience a force, when it is placed in an external electric field.The charge of the particle can be positive, negative, and zero.What are the fundamental properties of electric charge?Additivity of chargesConservation of chargesQuantization of charges.Like charges repels and unlike charges attract.It's a scalar quantity.

Thus, from the above, we can conclude that, when a positively charged insulating rod is brought close to an object that is suspended by a string. If the object is repelled away from the rod, we can conclude that the object is positively charged.

Learn more about the electric charge and its fundamental properties here: https://brainly.com/question/28020194

#SPJ4

Answer:

positively charged

Explanation:

when a positively charged object is being repelled, that means the charge should be the same for both.

What type of circuit have you made?

Answers

The type of circuit which have been made is the series circuit in this scenario.

What is a Series circuit?

This is a complete path which involves the whole electric current flowing through the various parts such as resistor etc..

There is only one path of current in which it does not undergo any form of split during motion.

Read more about Circuit here https://brainly.com/question/2969220

#SPJ1

What are the sign and magnitude in coulombs of a point charge that produces a potential of -3.50 V at a distance of 2.00 mm

Answers

The magnitude and sign of the charge are 0.8 MC and negative respectively.

To find the answer, we need to know about the electric potential of a point charge.

What's the mathematical expression of the electric potential of a point charge?Mathematically, the electric potential at a distance 'r' from a point charge 'q' is given as (Kq)/r. K is the electrical constant with value 9×10^(-9) in vaccum. What will be the magnitude and sign of a charge, if potential is -3.50V at 2mm?

From the expression of electric potential, charge is

q= (potential ×r)/K

= (-3.5×0.002)/ (9×10^(-9))

= -0.8 mega coulomb.

Thus, we can conclude that the magnitude and sign of the charge are 0.8 MC and negative respectively.

Learn more about the electric potential here:

brainly.com/question/14306881

#SPJ4

The law of combining volumes only applies under these conditions EXCEPT :_________.
i. the pressure must be the same. ii. the temperature must be the same. iii. the reactants must be liquids. iv. all reactants must be gases.

Answers

Answer:

measured at constant temperature and pressure

Hope this helps :)

Other Questions
Using the idea of concentration gradient explain why the purple colour of potassium permaganate gradually spreads throughout the water in the jar The graph of the function f(x) = (x-4)(x + 1) is shownbelow.4-264Mark this and return62T626XWhich statement about the function is true?The function is increasing for all real values of xwherex 4.O The function is decreasing for all real values of xwhere-1 < x < 4.O The function is decreasing for all real values of xwherex < 1.5. You roll a fair six-sided die twice. Find the probability of rolling a 2 the first time and a number greater than 4 the second time. Pls help! Geometry What is the perimeter and area of the shape above? If P(x + 2) = x + 3x + 1, then find P(x-1)?A) x+3x+1B) x-3x+1C) x-2D) X-3 GET BRAINLY! please help me figure this out Latoya writes a check to Scott for $1,000. Scott alters the check to read $11,000, indorses it on the back, and gives it to Jane. Jane indorses the check on the back and presents it to First Federal Credit Union to cash the check and receive the money. By presenting the check to First Federal Credit Union, Jane is warranting: Which of the following best describes an advantage of using subplot?A. It presents authors with an ideal way to introduce theme.B. It allows authors to change the pace of a story.C. It gives authors a reason to introduce nonessential characters.D. It provides a place to use flashback. find the slope of the line passing through the points (-5, 3) and (7, 9) what idea was madison expressing in this excerpt? What is the formula of gravity? 7.29. hose fills a swimming pool at a rate of 0.5 gallons per second. If the pool's capacity is 9,000 gallons, then how many hours does it take for the hose to completely fill an empty pool? What is one factor that influences your credit score?A. Your ageB. Number of dependentsC. Your ethnicityD. A loan default These questions are in Spanish, someone who knows Spanish, the topic is mathematics, please.(That solves it in Spanish) humility and maturity go hand in hand where did the statement come from?what does this statement mean?Examples of scenarios where this statement has been proven to be true? You enter a room. 2 dogs, 4 horses, one giraffe, and a duck are laying on a bed. 3 chicken are flying over a chair. How many legs are on the ground?. A store pays $140 for a cell phone. The store sells the cell phone for $315. Your classmate says that the markup is 125% because $175$140=1.25. Is your classmate correct? (brainliest for correct answer) Matt, a manager in New York City, has been transferred by his company to Japan for six months to study their operations as well as to negotiate a supplier contract. Matt is having some problems understanding how to do business in Japan. He wants to get down to business and get things done, but he senses that his Japanese coworkers want to get to know and trust him before focusing on doing business. The problem could be the fact that Matt is from a(n) __________, and believes building personal relationships is a waste of time that diverts attention away from the task at hand. 2.3.9 written assignment I need 1-7 please help will mark as Brainiest What temperature increase is necessary to increase the power radiated from an object by a factor of 8