Answer:
Reading a modern clock face
Explanation:
In the analog clock, the minute hand is on "14" minutes, and the hour hand is moving from "12" to "1" - this indicates a time of 12:14.
A compact disc (CD) is played by a cd player, which uses a laser to read the tracks on the disc. The disc spins initially at approximately 200 rotations per minute (rpm), and increases to a maximum of approximately 500 rpm as the laser spirals inward towards the center of the disc. This ensures that the laser covers equal distance in an equal amount of time during playback. During the time that the cd is played, which of the following statements is true?
a. The laser tracking mechanism experiences a changing tangential velocity
b. The laser tracking mechanism experiences a constant angular velocity
c. The laser tracking mechanism experiences a non-zero angular acceleration
d. The laser tracking mechanism experiences a non-zero tangential acceleration
Answer:
a. The laser tracking mechanism experiences a changing tangential velocity
c. The laser tracking mechanism experiences a non-zero angular acceleration
d. The laser tracking mechanism experiences a non-zero tangential acceleration
Explanation:
a. The laser tracking mechanism experiences a changing tangential velocity
This is because the tangential velocity v = rω where r = radius of disc and ω = angular speed of discs. Since r is constant, v ∝ ω.
Since the angular speed changes from 200 rpm to 500 rpm, thus, the tangential velocity would also change.
So, the laser tracking mechanism experiences a changing tangential velocity
c. The laser tracking mechanism experiences a non-zero angular acceleration
Since angular acceleration, α = Δω/Δt where Δω = change in angular speed and Δt = change in time.
Since there is a change in angular speed from 200 rpm to 500 rpm in time Δt, there is thus a non-zero angular acceleration.
So, The laser tracking mechanism experiences a non-zero angular acceleration
d. The laser tracking mechanism experiences a non-zero tangential acceleration
Since tangential acceleration, a = rα where r = radius of disc and α = angular acceleration.
Since there is an angular acceleration of the disc, there is thus going to be a tangential acceleration given by a = rα.
So, the laser tracking mechanism experiences a non-zero tangential acceleration
Statement b is false because, the disc experiences a changing angular speed from 200 rpm to 500 rpm.
How much heat is needed to warm 365 mL of water in a baby bottle from 240C to 38C
Answer:98.6 degrees Fahrenheit
Explanation:
define projectile in your own .
Answer:
a body which was thrown in space ,moves under the influence of gravity only is defined as projectile.
Answer:
projectile is defined as a body thrown in space , moves under the influence of gravity .hope it is you
500 J of work is used to decrease the angular velocity of a disk from 65 rad/s to 52 rad/s.What is the rotational inertia of the disk?
Answer:
The correct answer is "0.66 kg.m²".
Explanation:
The given values are:
K.E = 500 J
w₁ = 65 rad/s
w₂ = 52 rad/s
As we know,
⇒ [tex]K.E=\frac{1}{2}I[w_1^2-w_2^2][/tex]
then,
⇒ [tex]I=\frac{2(K.E)}{w_1^2-w_2^2}[/tex]
On putting the given values, we get
⇒ [tex]=\frac{2\times 500}{(65)^2-(52)^2}[/tex]
⇒ [tex]=\frac{1000}{4225-2704}[/tex]
⇒ [tex]=\frac{1000}{1521}[/tex]
⇒ [tex]=0.66 \ kg.m^2[/tex]
If F = force, which equation illustrates the Law of Conservation of Momentum?
A) F1 = F2
B) F1 = - F2
C) - F1 = -F 2
D) F1 + - F2 = F3
Answer:
b
Explanation:
f1=-f2 that could be thank u
A cold block of metal feels colder than a block of wood at the same temperature. Why? A hot block of metal feels hotter than a block of wood at the same temperature. Again, why? Is there any temperature at which the two blocks feel equally hot or cold? What temperature is this?
: In general, metals feel colder or hotter to the touch than other materials at the same temperature because they're good thermal conductors. This means they easily transfer heat to colder objects or absorb heat from warmer objects
It is because the metal conducted heat faster than it feels colder than the wood, which conducted heat slower. Even tho they are similar temperatures. The metal will feel colder than the wood because of the thermal conductivity of the metal, compared to the wood.
5. A 6.0-kilogram mass is moving with a speed of 2.0 m/s. What is the kinetic energy of the mass?
Answer:
K.E. = ½ × mv²
= ½ × 6 × (2)²
= ½ × 6 × 4
= 3 × 4
= 12 J
A truck is traveling on a level road. The driver suddenly applies the brakes, causing the truck to decelerate by an amount g/2. This causes a box in the rear of the truck to slide forward. If the coefficient of sliding friction between the box and the truckbed is 2/5, find the acceleration of the box relative to the truck and relative to the road.
Answer:
Truck [tex]\dfrac{g}{10}[/tex]
Road [tex]-\dfrac{g}{10}[/tex]
Explanation:
[tex]a_1[/tex] = Acceleration of truck = [tex]-\dfrac{g}{2}[/tex]
[tex]\mu[/tex] = Coefficient of friction = [tex]\dfrac{2}{5}[/tex]
Frictional force is given by
[tex]f=-\mu mg\\\Rightarrow f=-\dfrac{2}{5}mg\\\Rightarrow ma_2=-\dfrac{2}{5}mg\\\Rightarrow a_2=-\dfrac{2}{5}g[/tex]
Net acceleration is given by
[tex]a=a_2-a_1\\\Rightarrow a=-\dfrac{2}{5}g+\dfrac{g}{2}\\\Rightarrow a=\dfrac{g}{10}[/tex]
The acceleration of the box relative to the truck is [tex]\dfrac{g}{10}[/tex] and [tex]-\dfrac{g}{10}[/tex] relative to the road.
Naming covalent compounds
P4S5
Answer:
what the heck is sakurfa
Explanation:
Which two waves combine to form a surface wave?
a transverse wave and a light wave
two transverse waves
two longitudinal waves
a transverse wave and a longitudinal wave
Answer:
i beilieve that the answer is a transverse wave and a longitudinal wave
Explanation:
i dont really have an explanation
The two waves combine to form the surface wave will be the transverse wave and the longitudinal waves.
What are surface waves?Surface waves are generated from the point of the earthquake inside the earth. There are generally three types of waves are generated primary, secondary, and surface waves.
Now this surface wave is the slowest wave which reach to the surface of earth very slowly and is the most destructive wave.
The surface waves travel both in the vertical as the well horizontal direction along their direction of flow.
An example of surface waves is the car park in the parking that goes up down just like the waves in the oceans.
Thus the two waves combine to form the surface wave will be the transverse wave and the longitudinal waves.
To know more about surface waves follow
https://brainly.com/question/16948312
An iron wire has a length of 1.50 m and a cross sectional area of 0.290 mm2. If the resistivity of iron is 10.0 ✕ 10−8 Ω · m and a potential difference of 0.700 V is maintained across its length, determine the current in the wire (in A).
Answer:
1.35 A
Explanation:
Applying,
V = IR
I = V/R..................... Equation 1
I = Current, V = Voltage, R = Resistance.
But,
R = Lρ/A............... Equation 2
Where L = Length of the wire, ρ = resistivity, A = Cross-sectional area of the wire.
Sustitute equation 2 into equation 1
V = AV/Lρ............... Equation 3
From the question,
Given: V = 0.7 V, A = 0.290 mm² = 2.9×10⁻⁷ m², L = 1.5 m, ρ = 10×10⁻⁸ Ω.m
Substitute these values into equation 3
I = (0.7× 2.9×10⁻⁷)/(1.5× 10×10⁻⁸ )
I = (2.03×10⁻⁷)/(15×10⁻⁸)
I = 1.35 A
In a little league baseball game, the 145 grams ball enters the strike zone with a speed of 11.0 meters per second. The batter hits the ball and it leaves his bat with a speed of 25.0 meters per second in exactly the opposite direction. If the bat is in contact with the ball for 1.0 m/s, what is the magnitude of the average force exerted by the bat on the ball?
Answer:
Force = 5.22 N
Explanation:
According to Newton's Second Law of motion:
[tex]Force = Rate\ of\ Change\ of\ Momentum\\\\Force = \frac{mv_f-mv_i}{t}\\[/tex]
where,
m = mass of ball = 145 g = 0.145 kg
vf = final speed of ball after hit = 25 m/s
vi = initial speed of ball before hit = - 11 m/s (negative sign due to opposite direction)
t = time of contact = 1 s
Therefore,
[tex]Force = \frac{(0.145\ kg)(25\ m/s)-(0.145\ kg)(-11\ m/s)}{1\ s} \\\\[/tex]
Force = 5.22 N
Particles q1, 92, and q3 are in a straight line.
Particles q1 = -1.60 x 10-19 C, 92 = +1.60 x 10-19 C,
and q3 = -1.60 x 10-19 C. Particles qi and q2 are
separated by 0.001 m. Particles q2 and q3 are
separated by 0.001 m. What is the net force on q2?
Answer: 0
Explanation: Acellus
The charge q2 is kept in between the charges q1 and q3. The net force on charge q2 is zero.
What is force?The force is the action of push or pull in order to move or stop the object.
Given, q1 = -1.60 x 10⁻¹⁹ C, q2 = +1.60 x 10⁻¹⁹ C, and q3 = -1.60 x 10⁻¹⁹ C. Particles q1 ,q2 and q2 , q3 are separated by d =0.001 m.
Net electrostatic force on q2 will be
F12 =F23
k q1 q2 / d² = kq2 q3 /d²
q1 q2 = q2 q3
Substitute the values of forces, we get
1.60 x 10⁻¹⁹ x 1.60 x 10⁻¹⁹ = 1.60 x 10⁻¹⁹ x 1.60 x 10⁻¹⁹
1 =1
The net force F12 - F23 =0
Thus, the net force on q2 is zero.
Learn more about forces.
https://brainly.com/question/13191643
#SPJ2
Two loudspeakers S1 and S2, 2.20 m apart, emit the same single-frequency tone in phase at the speakers. A listener L is located directly in front of speaker S1, in other words, the lines LS1 and S1S2 are perpendicular. L notices that the intensity is at a minimum when L is 5.50 m from speaker S1. What is the lowest possible frequency of the emitted tone
Answer:
the lowest possible frequency of the emitted tone is 404.79 Hz
Explanation:
Given the data in the question;
S₁ ← 5.50 m → L
↑
2.20 m
↓
S₂
We know that, the condition for destructive interference is;
Δr = ( 2m + [tex]\frac{1}{2}[/tex] ) × λ
where m = 0, 1, 2, 3 .......
Path difference between the two sound waves from the two speakers is;
Δr = √( 5.50² + 2.20² ) - 5.50
Δr = 5.92368 - 5.50
Δr = 0.42368 m
v = f × λ
f = ( 2m + [tex]\frac{1}{2}[/tex])v / Δr
m = 0, 1, 2, 3, ....
Now, for the lowest possible frequency, let m be 0
so
f = ( 0 + [tex]\frac{1}{2}[/tex])v / Δr
f = [tex]\frac{1}{2}[/tex](v) / Δr
we know that speed of sound in air v = 343 m/s
so we substitute
f = [tex]\frac{1}{2}[/tex](343) / 0.42368
f = 171.5 / 0.42368
f = 404.79 Hz
Therefore, the lowest possible frequency of the emitted tone is 404.79 Hz
What type of force is F-?
Answer:
Frictional Force
Explanation:
i think so
Shrinking Loop. A circular loop of flexible iron wire has an initial circumference of 167 cm , but its circumference is decreasing at a constant rate of 13.0 cm/s due to a tangential pull on the wire. The loop is in a constant uniform magnetic field of magnitude 1.00 T , which is oriented perpendicular to the plane of the loop. Assume that you are facing the loop and that the magnetic field points into the loop.
(a) Find the emf induced in the loop at the instant when 9.0 s have passed.
(b) Find the direction of the induced current in the loop as viewed looking along the direction of the magnetic field.
Answer:
a) fem = - 0.0103 V, b) the applied field is in a vertical upward direction, the induced current is clockwise.
Explanation:
a) For this exercise we use Faraday's law
fem = [tex]- \frac{d \phi}{dty}[/tex]
the magnetic flux is
Ф = B. A = B A cos θ
The bold letters indicate vectors, in this case the direction of the magnetic field and the normal to the circumference is parallel therefore the angle is zero and the cos 0 = 1
fem = - B dA / dt
the area of a circle is
A = π r²
l
et's perform the derivative
dA / dt =π 2r [tex]\frac{dr}{dt}[/tex]
we substitute
fem = - B 2π r [tex]\frac{dr}{dt}[/tex]
the circumference of a circle is
L = 2π r
we substitute
fem = - B L ( L )
fem =
Let's find the circumference for the 9 s, let's use a direct rule of proportions
If the circumference changes 13cm at t = 1. how much does it change at t=9s
ΔL = 13cm (9s / 1s) = 117cm
the circumference that is
L = Lo - ΔL
L = 167 - 117
L = 50 cm
let's reduce all magnitudes to the SI system
L = 0.50 m
= 0.130 m / s
calculate us
fem = - 1.00 0.50 0.130
fem = - 0.0103 V
b) the electromotive force induced in the opposite direction to the change of the radius and is decreasing with time, the current follows the direction of the decreased voltage therefore the current is induced in the opposite direction to the change of the magnetic flux.
If the applied field is in a vertical upward direction, the induced current is clockwise.
Ways if improving soil fertility
Answer:
Soil fertility can be further improved by incorporating cover crops that add organic matter to the soil, which leads to improved soil structure and promotes a healthy, fertile soil; by using green manure or growing legumes to fix nitrogen from the air through the process of biological nitrogen fixation; by micro-dose ........
Answer:
Continuous cultivation of water intensive crops like sugarcane and rice has resulted in their water tables running low at 149 percent. Alternating crops with millet, which consumes less water and has a high nutritional value, can increase the soil fertility and balance nutrients present in it.Apr 19, 2019
Explanation:
pls mark me as a brainlist
hope my answer is helpful
15 points!
a. Calculate the electric potential energy stored in a 1.4 x 10-7 F capacitor
that stores 3.40 x 10-6 C of charge at 24.0 V.
Answer:
[tex]4.12\times 10^{-5}\ J[/tex].
Explanation:
Given that,
Capacitance, [tex]C=1.4\times 10^{-7}\ F[/tex]
Charge stored in the capacitor, [tex]Q=3.4\times 10^{-6}\ C[/tex]
We need to find the electric potential energy stored in the capacitor. The formula for the electric potential energy stored in the capacitor is given by :
[tex]E=\dfrac{Q^2}{2C}[/tex]
Put all the values,
[tex]E=\dfrac{(3.4\times 10^{-6})^2}{2\times 1.4\times 10^{-7}}\\\\=4.12\times 10^{-5}\ J[/tex]
So, the required electric potential eenergy is equal to [tex]4.12\times 10^{-5}\ J[/tex].
The coefficient of linear expansion of lead is 29 x 10 K What change in temperature will cause a 5-m long lead bar to change in length by 3.0 mm?
Answer:
These linear thermal expansion coefficients are room temperature values of metals. Linear thermal expansion coefficient is defined as material's fractional change in length divided by the change in temperature.
Explanation:
The change in temperature caused is 0.0000207 K.
To calculate the change in temperature we use the formula of linear expansivity below.
⇒ Formula:
∝ = ΔL/(LΔT).................. Equation 1⇒ Where:
∝ = Coefficient of linear expansionΔL = Change in lengthL = Original lengthΔT = Change in Temperature.⇒ Make ΔT the subject of the equation
ΔT = ΔL/(∝L)................ Equation 2From the question,
⇒ Given:
∝ = 2.9×10 K⁻¹ΔL = 3 mm = 3×10⁻³ mL = 5 m⇒ Substitute these values into equation 2
ΔT = (3×10⁻³)/(29×5)ΔT = 0.003/145ΔT = 0.0000207 KHence, the change in temperature caused is 0.0000207 K
Learn more about linear expansivity: https://brainly.com/question/14325928
What makes a 10 year old girl perfect?
Answer:
kindness
Explanation:
Which of the following statements is true concerning the induced current in a coil of wire for a magnet approaching or moving away from the coil?
a. The induced magnetic field repels an approaching magnet.
b. The induced magnetic field attracts a departing magnet.
c. The induced magnetic field always opposes the motion of the magnet.
d. All of the above statements are correct.
Answer:
c
Explanation:
it is c because I hade got it right
help fast lol- sience!!! giving brainliest answer too!
Answer:
I think it's C. Long root systems to reach water deep underground.
Answer:
C
stilt roots provide extra support
How does the presence of a nucleus provide a method of basic cell classification?
Answer:D.
Explanation:
what is force,momentum,and velocity.
Answer:
A force is a push or pull upon an object resulting from the object's interaction with another object.
Momentum is force or speed of movement.
Velocity defines the path of the motion of the frame or the object
A lead fishing weight of a mass of 0.20 kg is tied to a fishing line that is 0.50 m long. The weight is then whirled in a vertical circle. The finishing line will break if its tension exceeds 100.0 N.
Required:
a. If the weight is whirled at higher and higher speeds, at what point in the vertical circle will the string break (top, bottom, or random position)?
b. At what speed will the string break?
Answer:
The solution of the given question is summarized in the below section.
Explanation:
The given values are:
Tension,
T = 100 N
mass,
m = 0.2 kg
length,
l = 0.5 m
Now,
(a)
Somewhere at bottom, string or thread breaks since string voltage seems to be the strongest around this stage.
then,
⇒ [tex]T-mg=\frac{mv^2}{l}[/tex]
or,
⇒ [tex]T=mg+\frac{mv^2}{l}[/tex]
(b)
As we know,
⇒ [tex]\frac{mv^2}{l}=T-mg[/tex]
or,
⇒ [tex]v^2=\frac{(T-mg)l}{m}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{(100-0.2\times 10)0.5}{0.2}[/tex]
⇒ [tex]=\frac{49}{0.2}[/tex]
⇒ [tex]v =\sqrt{245}[/tex]
⇒ [tex]=15.65 \ m/s[/tex]
When played properly, this instrument makes sounds. The instrument makes sounds directly because of which action in the wire? I think its Vibration i dont know
difference between concave and convex lens
Answer:
convex lens:converging lens
focal length:positive
magnification; positive
concave lens:diverging lend
focal length:negative
magnification :negative
types:concavoconcave,planoconcave
A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. A lens is a transparent material (either curved or flat surface) based on the principles of refraction. Concave lenses and convex lenses are often used together which is known as the Concave – Convex lens. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses. Cameras, telescopes and microscopes use different lens, helping us to see the world in a better
Read it and make it as table.
When antimatter interacts with an equal mass of ordinary matter, both matter and antimatter are converted completely into energy, in the form of photons. In an antimatter-fueled spaceship, a staple of science fiction, the newly created photons are shot from the back of the ship, propelling it forward. Suppose such a ship has a mass of 2.00×10^6kg, and carries a mass of fuel equal to 4% of its mass, or 4.00×10^4kg of matter and an equal mass of antimatter.
Required:
What is the final speed of the ship, assuming it starts from rest, if all energy released in the matter-antimatter annihilation is transformed into the kinetic energy of the ship?
Answer:
v = 5.88 10⁷ m / s
Explanation:
For this exercise we use the relation
E = m c²
also indicate that all energy is converted into kinetic energy
E = K = ½ (M-2m) v²
where m is the mass of antimatter and M is the mass of the ship's mass. Factor two is due to the fact that equal amounts of matter and antimatter must be combined
we substitute
m c² = ½ (M-2m) v²
v² = [tex]2 \frac{m}{M+2m} \ c^2[/tex]
let's calculate
v = [tex]\sqrt{2 \ \frac{4 \ 10^4 }{2 \ 10^6 + 2 \ 4 \ 10^4} \ (3 \ 10^8)^2}[/tex]
v = [tex]\sqrt{ 34.615 \ 10^{14}}[/tex]
v = 5.88 10⁷ m / s
A battery is connected to a light bulb in a circuit. There is a current of 2 A in the light bulb.
The voltage of the battery is 1.5 V. What is the resistance of the light bulb?
V
Use R = to solve this problem.
Answer:
Resistance of the light bulb = 1.33 ohm (Approx.)
Explanation:
Given:
Current in electric bulb = 2 Amp
Voltage in battery = 1.5 Volt
Find:
Resistance of the light bulb
Computation:
Resistance = Voltage / Current
Resistance of the light bulb = Voltage in battery / Current in electric bulb
Resistance of the light bulb = 2 / 1.5
Resistance of the light bulb = 1.33 ohm (Approx.)
Determine the direction of the force on a charge.
a. along the line between the charge and the center of the square outward of the center
b. along the side of the square outward of the other charge that lies on the side
c. along the line between the charge and the center of the square toward the center
d. along the side of the square toward the other charge that lies on the side
Answer:
hi your question is incomplete below is the complete question
A charge of 2.15 mC is placed at each corner of a square 0.500 m on a side. Determine the direction of the force on a charge.
answer : Along the line between the charge and the center of the square outward of the center ( A )
Explanation:
The direction of the force on a charge is along the line between the charge and the center of the square outward of the center
Given that; Fnet = 3.17 * 10^-1 N ( calculated value )
The nature of the Force is repulsive in nature
attached below is a Pictorial representation of the direction of the force on a charge