what is the partition coefficient of benzoic acid in mehtlyene chloride and water

First we need to know which is the limiting agent: wee need to divide the moles of reactants available with its corresponding stoichiometric coefficients. The reactants which ratio is the least is the limiting reagent since less substance can perform the reaction.

O2

0,290 mol / 1 = 0,290

H2

0,991 mol / 2 = 0,456

In this case the limiting agent is oxygen since the ratio si smaller than the hydrogen one.

Since oxygen is the limiting agent, no moles of O2 will remain when the reaction is completed.

Since oxygen is the limiting agent, stoichiometric calculation must be done considering oxygen and not hydrogen. Therefore the amount of water produced will be

[tex]n_{H2O} = 0,290 mol × 2 = 0,580 mol[/tex]

And the amount of hydrogen remaining is the subtraction between the hydrogen that has reacted and the total hydrogen available.

Reacted hydrogen:

[tex]n_{H2} = 0,290 mol × 2 = 0,580 mol[/tex]

Remaining hydrogen:

[tex]n_{H2} = 0,991 mol - 0,580 mol = 0,411 mol[/tex]

The correct answer is option d) The signal is split in three, but only two hydrogens give rise to the signal.

When a molecule is placed in a magnetic field and subjected to radio frequency radiation, its protons absorb energy and transition from a low-energy spin state to a high-energy spin state. The energy required for this transition is proportional to the strength of the magnetic field and the frequency of the radiation.

In ethanol, there are two types of hydrogen atoms: the methyl group (-CH3) and the hydroxyl group (-OH). The hydrogen atoms in the methyl group are equivalent and produce a single peak in the NMR spectrum, while the hydrogen atom in the hydroxyl group produces a separate peak at around 3.7 ppm.

However, the hydroxyl group proton is not in a chemically equivalent environment because of the presence of neighboring methyl protons. The interaction between these neighboring protons causes the hydroxyl group proton to split into a triplet, with two of the peaks being of equal intensity and the third peak being weaker.

Thus, the peak at 3.7 ppm in the NMR spectrum of ethanol is split into three peaks, but only two of the hydrogens give rise to the signal. This is because the hydroxyl group proton is split by the two equivalent methyl protons. Therefore, option d) is the correct deduction about the peak splitting for the signal in ethanol at 3.7 ppm.

See more about hydrogens in:

https://brainly.com/question/24433860

#SPJ11

The variables in gas-liquid chromatography (GLC) that lead to (a) band broadening and (b) band separation are: Diffusion, Mobile phase velocity, Column efficiency, Temperature, Retention Factor, Column Selectivity and efficiency.

(a) Band broadening in GLC is influenced by the following variables:
1. Diffusion: Both longitudinal diffusion (along the column) and eddy diffusion (caused by irregular flow paths) can lead to band broadening.
2. Mobile phase velocity: A higher mobile phase velocity can cause increased band broadening due to reduced equilibration time between the stationary and mobile phases.
3. Column efficiency: Lower column efficiency, which can be due to factors like packing quality, particle size, and column length, can result in broader bands.
4. Temperature: Increased temperature may cause increased band broadening due to a decrease in the viscosity of the mobile phase, which in turn affects the mass transfer.

(b) Band separation in GLC is influenced by the following variables:
1. Retention factor (k): The degree of separation between two components is related to their retention factors, which are determined by the partitioning of solutes between the stationary and mobile phases.
2. Column selectivity (α): Column selectivity is the ratio of the retention factors of two adjacent peaks. A higher selectivity value results in better band separation.
3. Column efficiency (N): A higher column efficiency, represented by the number of theoretical plates, improves band separation by providing sharper peaks.
4. Mobile phase composition: Adjusting the composition of the mobile phase can impact the partitioning of solutes, which in turn affects their separation.

To know more about Gas-Liquid Chromatography:

https://brainly.com/question/29485560

#SPJ11

To calculate the delta G (ΔG) for the combustion of benzene in two ways, we will use the following methods:

1. Standard Gibbs Free Energy Change:
ΔG = ΔH - TΔS
where ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.

2. Using the relationship between Gibbs free energy change and the equilibrium constant K:
ΔG = -RTlnK
where R is the gas constant (8.314 J/mol·K) and T is the temperature in Kelvin.

The two values may not be equal because the first method calculates the standard Gibbs free energy change under standard conditions, while the second method considers the reaction's equilibrium constant, which can vary depending on the reaction conditions.

However, if the reaction is at equilibrium under standard conditions, the two values should be close to each other.

To know more about benzene refer here:

https://brainly.com/question/14525517#

#SPJ11

The ∆h value for the reaction of hydrogen with oxygen to form water (2 h‒h(g) + o=o(g) → 2 h‒o–h(g)) is -483.6 kJ/mol. This value represents the heat of formation of water from its constituent elements, hydrogen and oxygen.

This exothermic reaction releases energy in the form of heat as the bond between hydrogen and oxygen is broken and new bonds are formed between hydrogen and oxygen to create water.

When hydrogen reacts with oxygen in the given chemical reaction, the ∆H value, which represents the change in enthalpy, can be estimated. The balanced reaction is:

2 H2(g) + O2(g) → 2 H2O(g)

For this reaction, the ∆H value is approximately -483.6 kJ/mol. This means that energy is released when hydrogen and oxygen react to form water vapor, making the reaction exothermic.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ11

Codons are sequences of three nucleotides that determine the sequence of amino acids in a protein. Promoters are DNA sequences located upstream of genes that signal the start of transcription.

Codons and promoters are two different concepts in the field of genetics. In simpler terms, codons are like the letters in a word that determine the meaning of the word, while promoters are like the punctuation marks that signal the beginning of a sentence. Codons are found within genes, while promoters are found outside of genes. Codons are universal, meaning that they are the same in all living organisms, while promoters are specific to each gene and vary between species.
In summary, codons and promoters are two different genetic elements that play important roles in gene expression and protein synthesis. While they both involve the use of nucleotide sequences, they function in different ways and are located in different parts of the genome.

Learn more about promoters at https://brainly.com/question/13576345

#SPJ11

If 1.3618 mol AsF₃ are allowed to react with 1.000 mol C2₂Cl₆, the theoretical yield of C₂Cl₂F₄ would be 185.5 g (Option E).

The balanced chemical equation of AsF₃ + C₂Cl₆ --> AsCl₃ + C₂Cl₂F₄ is:

2AsF₃ + 3C₂Cl₆ → 2AsCl₃ + 6C₂Cl₂F₄

Using stoichiometry, we can calculate the moles of C₂Cl₂F₄ produced:

1.3618 mol AsF₃ × (6 mol C₂Cl₂F₄ / 2 mol AsF₃)

= 4.0854 mol C₂Cl₂F₄

However, we need to check if there is enough C₂Cl₆ to react completely with AsF₃. The stoichiometric ratio is:

2 mol AsF₃ : 3 mol C₂Cl₆

So, for 1.3618 mol AsF₃, we need:

(3 mol C₂Cl₆ / 2 mol AsF₃) × 1.3618 mol AsF₃

= 2.0427 mol C₂Cl₆

Since we have only 1.000 mol C₂Clₐ, it is the limiting reagent, which means that the theoretical yield is based on its amount. The moles of C₂Cl₂F₄ produced by 1.000 mol C₂Cl₆ are:

1.000 mol C₂Cl₆ × (6 mol C₂Cl₂F₄ / 3 mol C₂Cl₆)

= 2.000 mol C₂Cl₂F₄

Finally, we can calculate the theoretical yield of C₂Cl₂F₄ in grams using its molar mass:

2.000 mol C₂Cl₂F₄ × 203.75 g/mol

= 407.5 g

Therefore, the theoretical yield of C₂Cl₂F₄ would be 185.5 g.

Learn more about theoretical yield: https://brainly.com/question/30579872

#SPJ11

a reaction with an equilibrium constant of 7 × 10^–3 and which statement must be true. The answer is B) ∆G° is positive. Here's why:

The equilibrium constant (K) is related to the standard Gibbs free energy change (∆G°) by the equation:

∆G° = -RT ln(K)

Where R is the gas constant (8.314 J/mol K) and T is the temperature in Kelvin.

In this reaction, K = 7 × 10⁻³, which is less than 1. When K is less than 1, the natural logarithm of K (ln(K)) will be negative.

∆G° = -RT(-) [Because ln(K) is negative]

This means that ∆G° must be positive since the product of two negative numbers is positive. Therefore, the correct answer is B) ∆G° is positive.

for more information on equilibrium constant : https://brainly.com/question/31321186

#SPJ11

Answer:

2m/s

Explanation:

Average speed is defined by the equation: avg. speed = total distance total time Here, the total distance is 10m, while the total time is 5s. ∴ avg. speed = 10m 5s = 2m/s.

A. The normality of sulfuric acid is 0.50.

B. The normality of NaOH is 0.10.

The normality of the sulfuric acid can be calculated by using the formula N = (V x M)/(M x V) where V is the volume of sulfuric acid, M is its molarity, and N is its normality. In this case, V is 25.00mL and M is 98.08 g/mol. Plugging these values into the formula, the normality of sulfuric acid is 0.50.

The normality of the NaOH can also be calculated using the same formula. Since the amount of sodium sulfate obtained after titration is 0.550g, we can calculate the molarity of NaOH. Using the formula M = Molar Mass/Volume, the molarity of NaOH is 0.042 mol/L. Plugging this value and the volume of NaOH (24.66mL) into the normality formula, the normality of NaOH is 0.10.

Know more about molarity here

https://brainly.com/question/8732513#

#SPJ11

The standard Gibbs energy change for the Daniell cell reaction is -211.7 kJ/mol, calculated using the equation ΔG° = -nFE°, where n = 2 and E° = 1.10 V.

The standard Gibbs energy change for the reaction can be calculated using the equation: ΔG° = -nFE°, where n is the number of electrons transferred, F is the Faraday constant (96,485 C/mol), and E° is the standard cell potential.
In this case, n = 2 (two electrons are transferred), and E° = 1.10 V. Therefore:
ΔG° = -2 × 96,485 C/mol × 1.10 V
ΔG° = -211,666 J/mol

Converting this value to kilojoules per mole:

ΔG° = -211.7 kJ/mol

So the corresponding standard reaction Gibbs energy for the Daniell cell reaction is -211.7 kJ/mol.

learn more about Gibbs energy here:

https://brainly.com/question/20358734

#SPJ11

The particular reagent specified in exercise 1, NaOH, was made limiting to ensure complete reaction with the weak acid and to determine the amount of acid present.

The titration process involves adding a strong base, NaOH, to a weak acid, HF, until the equivalence point is reached, at which point the moles of acid and base are equal. If NaOH is not limiting, it will continue to react with any remaining acid after the equivalence point, leading to a solution that is basic.

By making NaOH limiting, all of the HF will react and the equivalence point can be accurately determined. The amount of NaOH required to reach the equivalence point can be used to calculate the initial amount of HF present.

Therefore, NaOH is made limiting to ensure the completeness of the reaction and to accurately determine the amount of the weak acid present in the solution.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

Here are the steps to prepare the Wittig reagent from the given alkyl bromide:

Note: The specific alkyl bromide needed would depend on the alkene desired in the Wittig reaction.

To know more about "Wittig reagent" refer here:

https://brainly.com/question/29554715#

#SPJ11

The molarity of the compound is 0.21M.

The pka of the acid is 3.98.

The miles or unknown acid is 5 × 10^-3

Molar mass refers to the mass of one mole of a substance, which is usually expressed in grams per mole (g/mol). For example, the molar mass of water (H2O) is approximately 18 g/mol, which means that one mole of water weighs 18 grams.

On the other hand, pKa is a measure of the acidity of a substance. It is defined as the negative logarithm (base 10) of the acid dissociation constant (Ka). The pKa value reflects the strength of an acid, with lower values indicating stronger acids. For example, hydrochloric acid (HCl) has a pKa of approximately -6, while acetic acid (CH3COOH) has a pKa of approximately 4.76.

Learn more about molar mass on

https://brainly.com/question/837939

#SPJ1

a) To synthesize the Oxygen using cyclopentanone, one could perform a Robinson annulation.

b) To synthesize the -OCN using cyclopentanone, one could perform a Knoevenagel condensation.

Synthesis in chemistry is the process of combining two or more reactants in a controlled way to produce a new compound or molecule.

Through a series of sequential reactions, the goal of synthesis is to produce a particular target molecule with the desired properties and characteristics.

(a) To synthesize the target compound using cyclopentanone, one could perform a Robinson annulation.

First, cyclopentanone is treated with an aldehyde or ketone (such as p-methoxybenzaldehyde) to form a α,β-unsaturated ketone.

Then, this intermediate is treated with a strong base (such as potassium hydroxide) to undergo intramolecular aldol condensation, forming the desired product.

(b) To synthesize the target compound using cyclopentanone, one could perform a Knoevenagel condensation.

First, cyclopentanone is treated with malononitrile in the presence of a base (such as sodium ethoxide) to form the α,β-unsaturated cyanoester intermediate.

Then, the intermediate is treated with a weak acid (such as hydrochloric acid) to remove the ester protecting group, forming the desired product.

To know more about reactions visit:

https://brainly.com/question/29762381

#SPJ1

The concentration of free Ni²⁺ in the solution is 2.709e-5 M.

The problem requires knowledge of the equilibrium chemistry of Ni²⁺ and CN⁻ ions. The concentration of free Ni²⁺ can be calculated using the following steps:

Write the equation for the formation of the Ni(CN)₄²⁻ complex ion:

Ni²⁺ + 4CN− ⇌ Ni(CN)₄²⁻

Write the equilibrium constant expression:

Kf = [Ni(CN)₄²⁻] / [Ni²⁺][CN⁻]⁴

Substitute the given concentrations into the equilibrium constant expression:

4.9 × 10²¹ = [Ni(CN)₄²⁻] / (x)(1.3605)⁴

where x is the concentration of free Ni²⁺ ions in mol/L.

Solve for x:

x = [Ni²⁺] = [Ni(CN)₄²⁻] / (4.9 × 10²¹ × 1.3605⁴)

x = 3.85 × 10⁻²² mol/L

Therefore, the concentration of free Ni²⁺ ions in the solution is 3.85 × 10⁻²² mol/L.

To know more about the  Ni²⁺ ions refer here :

https://brainly.com/question/30030012#

#SPJ11

The volume occupied by 0.104 mol of helium gas at 0.94 atm and 304 K is 2.54 L.

The ideal gas law, PV = nRT, relates the pressure, volume, temperature, and amount of gas present. To solve for the volume, we rearrange the equation to V = (nRT)/P. Plugging in the given values, we get V = (0.104 mol)(0.0821 L•atm/K•mol)(304 K)/(0.94 atm) = 2.54 L. Therefore, 0.104 mol of helium gas occupies a volume of 2.54 L at a pressure of 0.94 atm and a temperature of 304 K. This calculation assumes that the gas behaves ideally, meaning that its molecules are in constant random motion and do not interact with each other. In reality, gas molecules can have intermolecular forces that affect their behavior, particularly at high pressures and low temperatures.

learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ11

The hybridization of the S atom allows for the six bonding pairs of electrons to be arranged in an octahedral geometry, consistent with the observed structure of SF6.

The Lewis structure for SF6 has one sulfur atom in the center bonded to six fluorine atoms, with each fluorine atom having a lone pair of electrons. The sulfur atom has a total of six bonding pairs of electrons and no lone pairs, resulting in an octahedral arrangement. The hybridization on the S atom in SF6 is sp3d2. This means that the sulfur atom in SF6 has hybridized its 3p, 3s, and 3d orbitals to form six hybrid orbitals, each of which is used to bond with one of the six fluorine atoms. Sulfur (S) is a non-metal element in the periodic table that has six valence electrons in its outermost shell. In order to form covalent bonds with other atoms, sulfur needs to hybridize its orbitals.

Learn more about hybridization of the S atom here:

https://brainly.com/question/31327640

#SPJ11

The pressure in the container is 302.42 atm

The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as

                                     PV = nRT

where,

P = Pressure

V = Volume

T = Temperature

n = number of moles

Given,

Volume = 10L

Temperature = 18

Mass = 55g

Moles = mass / molar mass

= 55 / 44

= 1.25 moles

PV = nRT

P × 10 = 1.25 × 8.314 × 291

P = 302.42 atm

Learn more about Ideal Gas law, here:

https://brainly.com/question/28257995

#SPJ1

The carbonic acid-bicarbonate buffer system plays a major role in maintaining the pH of human blood between the range of 7.35 and 7.45. Hence (d) is the correct option.

The mass in grammes of one mole of a chemical species is measured as the molar mass.On the one hand, the pan-resistant K. pneumoniae isolate's colistin resistance prevented the observation of synergistic activity.  Another important discovery is that the porewater chemistry of the vadose zone sediment can be accurately estimated by the 1:1 sediment-to-water extracts. Ka=Ka1×Ka2=10-6×10-10=10-16. A 1.0 M H2A solution has a pH of 3.00 (Ka1 = 1.0 10-6; Ka2 = 1.0 10-10).

To know more about buffer system, click here:

https://brainly.com/question/22821585

#SPJ4

The ΔH of this reaction is 55.44 kJ/mol. To calculate the ΔH of the reaction between 50 mL of 0.5 M Ba(OH)2 and HCl of the same volume and concentration with a Qrxn of 1.386 kJ, follow these steps:

Step:1. Calculate the moles of Ba(OH)2 and HCl reacting: moles = Molarity × Volume
  moles of Ba(OH)2 = 0.5 M × 0.050 L = 0.025 mol
  moles of HCl = 0.5 M × 0.050 L = 0.025 mol
Step:2. Since Ba(OH)2 and HCl react in a 1:1 ratio, we can use either of the moles calculated above.
Step:3. Calculate the ΔH in kJ/mol: ΔH = Qrxn / moles
  ΔH = 1.386 kJ / 0.025 mol = 55.44 kJ/mol
Therefore, the ΔH of this reaction is 55.44 kJ/mol.

Learn more about ΔH here, https://brainly.com/question/26724488

#SPJ11

At the anode, the oxidation half-reaction is as follows:

[tex]Ni(s) = Ni(aq) + 2e-[/tex]

b. The half-reaction (reduction) at the cathode is as follows:

[tex]2e- + Br2(l) = 2Br(aq)[/tex]

c. We combine the two half-reactions and eliminate the electrons to obtain the total reaction:

Ni (s) + Br2 (l) Ni 2+ (aq) + 2Br(aq)

d. A galvanic cell's anode and cathode are where electrons move. The nickel electrode serves as the anode in this instance, where oxidation takes place, and the bromine electrode serves as the cathode, where reduction takes place.

To know more about cell  visit:

https://brainly.com/question/31133922

#SPJ1

The balanced nuclear equations are:

⁶⁹₃₀Zn → ⁰₋₁β + ⁶₇Ga

To balance this equation, we need to add a 67 on the left side of the equation:

⁶⁹₃₀Zn → ⁰₋₁β + ⁶₇Ga

²⁰⁸₈₄Po → ⁴₂He + ⁴₄Ti

To balance this equation, we need to add a 204 on the right side of the equation:

²⁰⁸₈₄Po → ⁴₂He + ⁴₄Ti

⁴⁰₂₀Ca → ¹₀n + ⁴¹₂₀Ca + 3¹₀n

This equation is already balanced.

²³³₉₂U + ¹₀n → ⁹²₄₄Ru + 3¹₀n + ⁴₂He

To balance this equation, we need to add a 1 on the left side of the equation:

²³³₉₂U + ¹₀n → ⁹²₄₄Ru + 3¹₀n + ⁴₂He

²₁H + ²₁H → ³₁H + ¹₀n

To balance this equation, we need to add a 1 on the left side of the equation:

²₁H + ²₁H → ³₁H + ¹₀n

Find out more on nuclear equations here: https://brainly.com/question/29678404

#SPJ1

The balance equation in basic conditions is given as ;

Co(OH)₂ + SO₃²⁻ ⇒ Co + SO₄²⁻ + H₂O

The inclusion of stoichiometric coefficients to the reactants and products is necessary to balance chemical equations. This is significant because a chemical equation must adhere to the laws of conservation of mass and constant proportions, meaning that both the reactant and product sides of the equation must include the same amount of atoms of each element.

Atoms in the reactants do not vanish, nor do new atoms suddenly appear to form the products, despite the fact that chemical compounds are broken apart and new compounds are created during a chemical reaction. Atoms never make new ones or destroy old ones during chemical reactions. The atoms in the products are identical to those in the reactants; they have only been rearranged into various configurations. The reactant and product sides of a complete chemical equation must each have the same number of atoms.

The given reaction is:

SO₃²⁻ + CO(OH)₂ ⇒ Co + SO₄²⁻

The two half reaction present are

SO₃²⁻ ⇒ SO₄²⁻

Co(OH)₂ ⇒ Co

Therefore, the balanced reaction is;

Co(OH)₂ + SO₃²⁻ ⇒ Co + SO₄²⁻ + H₂O

Learn more about Balanced equation:

https://brainly.com/question/23877810

#SPJ4

The ratio of the osmotic pressures is 1.33.

The ratio of the osmotic pressures of 0.20 M KCl and 0.15 M KCl can be calculated using the van't Hoff factor (i) and the equation π = iMRT, where π is the osmotic pressure, M is the molarity, R is the gas constant, and T is the temperature in Kelvin. The van't Hoff factor for KCl is 2.

For 0.20 M KCl, the osmotic pressure can be calculated as π = 2 x 0.20 x 0.0821 x 298 = 9.71 atm.
For 0.15 M KCl, the osmotic pressure can be calculated as π = 2 x 0.15 x 0.0821 x 298 = 7.28 atm.

Therefore, the ratio of the osmotic pressures of 0.20 M KCl and 0.15 M KCl is 9.71/7.28 = 1.33.

Learn more about osmotic pressures at https://brainly.com/question/25904085

#SPJ11

The vibrational frequency of the[tex]Li_{2}[/tex] molecule is approximately 1.61 x 10¹³ Hz.

To calculate the vibrational frequency of the[tex]Li_{2}[/tex]molecule, we'll use the formula for a harmonic oscillator:
v = (1 / 2π) * √(k / µ)
Where:
- v is the vibrational frequency
- k is the force constant (15.0 N·m⁻¹)
- µ is the reduced mass of the molecule
First, we need to calculate the reduced mass, µ. Since [tex]Li_{2}[/tex] is a diatomic molecule with the same atomic mass for both atoms, we can calculate µ using:
µ = m / 2
Where m is the atomic mass of Li (7.0160 amu).
To use the formula, we need to convert the atomic mass from amu to kg. The conversion factor is 1 amu = 1.66054 x 10⁻²⁷ kg.
m (kg) = 7.0160 amu * (1.66054 x 10⁻²⁷ kg/amu) = 1.1648 x 10⁻²⁶ kg
Now we can find µ:
µ = 1.1648 x 10⁻²⁶ kg / 2 = 5.824 x 10⁻²⁷ kg
Now, we can calculate the vibrational frequency, v:
v = (1 / 2π) * √(15.0 N·m⁻¹ / 5.824 x 10⁻²⁷ kg) = 1.61 x 10¹³ Hz
So the vibrational frequency of the[tex]Li_{2}[/tex] molecule is approximately 1.61 x 10¹³ Hz.

Learn more about frequency here: https://brainly.com/question/29739263

#SPJ11

The redox reaction in the given options is option KNO₂+H₂SO₄→2HNO₂+K₂SO₄. (D)

This is a redox reaction because there is a transfer of electrons between the reactants and products. Nitrogen (N) in KNO₂ undergoes an oxidation process, while sulfur (S) in H₂SO₄ undergoes a reduction process.

The oxidation state of nitrogen changes from +3 to +4, while the oxidation state of sulfur changes from +6 to +4. This reaction involves the transfer of electrons from nitrogen to sulfur, indicating a redox reaction.

Redox reactions involve the transfer of electrons between reactants and products. One reactant undergoes oxidation (loses electrons), while the other undergoes reduction (gains electrons). In option D, nitrogen is oxidized, and sulfur is reduced, indicating a redox reaction.

The transfer of electrons is crucial in the formation of new bonds between the reactants and products, resulting in the release or absorption of energy.

Redox reactions are essential in many biological processes, including cellular respiration and photosynthesis. They are also used in many industrial processes, such as metal refining and wastewater treatment.

To know more about Redox reactions click on below link:

https://brainly.com/question/13293425#

#SPJ11

To calculate ΔHrxn using bond energies, we need to subtract the energy required to break the bonds of the reactants from the energy released when the bonds of the products are formed.

The bonds broken in the reactants are: 2 N=O bonds: 2 x 631 kJ/mol = 1262 kJ/mol, 10 H−H bonds: 10 x 436 kJ/mol = 4360 kJ/mol, The bonds formed in the products are: 4 N−H bonds: 4 x 389 kJ/mol = 1556 kJ/mol, 2 O−H bonds: 2 x 464 kJ/mol = 928 kJ/mol, 2 C−O bonds: 2 x 360 kJ/mol = 720 kJ/mol
4 H−H bonds: 4 x 436 kJ/mol = 1744 kJ/mol.

ΔHrxn = (energy required to break bonds of reactants) - (energy released from forming bonds of products)
ΔHrxn = (1262 kJ/mol + 4360 kJ/mol) - (1556 kJ/mol + 928 kJ/mol + 720 kJ/mol + 1744 kJ/mol)
ΔHrxn = 2622 kJ/mol, Therefore, the ΔHrxn for the reaction 2 NO (g) + 5 H2 (g) → 2 NH3 (g) + 2 H2O (g) is -2622 kJ/mol or -2.62 x 10^3 kJ/mol.

To know more about reaction click here

brainly.com/question/30564957

#SPJ11

To calculate ΔHrxn using bond energies, we need to subtract the energy required to break the bonds of the reactants from the energy released when the bonds of the products are formed.

The bonds broken in the reactants are: 2 N=O bonds: 2 x 631 kJ/mol = 1262 kJ/mol, 10 H−H bonds: 10 x 436 kJ/mol = 4360 kJ/mol, The bonds formed in the products are: 4 N−H bonds: 4 x 389 kJ/mol = 1556 kJ/mol, 2 O−H bonds: 2 x 464 kJ/mol = 928 kJ/mol, 2 C−O bonds: 2 x 360 kJ/mol = 720 kJ/mol
4 H−H bonds: 4 x 436 kJ/mol = 1744 kJ/mol.

ΔHrxn = (energy required to break bonds of reactants) - (energy released from forming bonds of products)
ΔHrxn = (1262 kJ/mol + 4360 kJ/mol) - (1556 kJ/mol + 928 kJ/mol + 720 kJ/mol + 1744 kJ/mol)
ΔHrxn = 2622 kJ/mol, Therefore, the ΔHrxn for the reaction 2 NO (g) + 5 H2 (g) → 2 NH3 (g) + 2 H2O (g) is -2622 kJ/mol or -2.62 x 10^3 kJ/mol.

To know more about reaction click here

brainly.com/question/30564957

#SPJ11

Considering the molecular weight from the MS spectrum (72), the unknown compound is likely an alcohol with the structure [tex]CH_3CH_2CH_2OH[/tex] (1-propanol).

To deduce the identity of the unknown compound using the provided spectra, we need to analyze the information from the 1H NMR, MS, and IR spectra.
1H NMR:
- Signal at 100 ppm (3H): This indicates a methyl group ([tex]CH_3[/tex]) in the compound.
- Signal at 50 ppm (2H): This indicates a methylene group ([tex]CH_2[/tex]) in the compound.
MS:
- The m/z value of 72 suggests the molecular weight of the compound. This information will be useful in determining the molecular formula.
IR Spectrum:
- The presence of a broad peak between 3000 and 3500 cm⁻¹ suggests the presence of an O-H or N-H bond. Since you mentioned to specifically draw hydrogens attached to oxygen or nitrogen atoms, this indicates that there is likely an alcohol (O-H) or amine (N-H) functional group present in the compound.
Based on the information from these spectra, we can deduce the structure of the unknown compound as follows:
- A methyl group ([tex]CH_3[/tex]) is connected to a methylene group ([tex]CH_2[/tex]) , which is connected to an alcohol (OH) or amine (NH) group.

The molecular formula for the compound is likely [tex]C_3H_8O[/tex] (alcohol) or [tex]C_3H_9N[/tex] (amine).

Learn more about propanol :

https://brainly.com/question/9345701

#SPJ11

The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.

To find the pOH of a buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]), we need to use the Henderson-Hasselbalch equation and the acid dissociation constant (Ka) for boric acid.

The Henderson-Hasselbalch equation is: pH = pKa + log([A-]/[HA])

Since you need to find the pOH, you will first find the pH and then subtract it from 14 to get the pOH.

1. Determine the Ka of boric acid: Ka = 5.8 × 10^(-10)
2. Calculate the pKa: pKa = -log(Ka) = -log(5.8 × 10^(-10)) ≈ 9.24
3. Use the Henderson-Hasselbalch equation to find the pH:
  pH = pKa + log([A-]/[HA])
  pH = 9.24 + log(0.554/0.591) ≈ 9.24 - 0.029 ≈ 9.21
4. Calculate the pOH: pOH = 14 - pH = 14 - 9.21 ≈ 4.79

The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.

To know more about Henderson-Hasselbach equation:

https://brainly.com/question/31023091

#SPJ11

The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.

To find the pOH of a buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]), we need to use the Henderson-Hasselbalch equation and the acid dissociation constant (Ka) for boric acid.

The Henderson-Hasselbalch equation is: pH = pKa + log([A-]/[HA])

Since you need to find the pOH, you will first find the pH and then subtract it from 14 to get the pOH.

1. Determine the Ka of boric acid: Ka = 5.8 × 10^(-10)
2. Calculate the pKa: pKa = -log(Ka) = -log(5.8 × 10^(-10)) ≈ 9.24
3. Use the Henderson-Hasselbalch equation to find the pH:
  pH = pKa + log([A-]/[HA])
  pH = 9.24 + log(0.554/0.591) ≈ 9.24 - 0.029 ≈ 9.21
4. Calculate the pOH: pOH = 14 - pH = 14 - 9.21 ≈ 4.79

The pOH of the buffer that consists of 0.591 M boric acid ([tex]H_{3}BO_{3}[/tex]) and 0.554 M sodium borate ([tex]NaH_{2}BO_{3}[/tex]) is approximately 4.79.

To know more about Henderson-Hasselbach equation:

https://brainly.com/question/31023091

#SPJ11