What is the overall equation for the covalent bond in H2O . Is it H2 + O2=H2O OR. H2 + O = H2O

Answer:

Period 4

Explanation:

Given the electronic configuration of the element;

= Is²  2s²  2p⁶  3s²  3p⁶  3d¹⁰   4s²    4p¹

The period of the element is determined by the highest coefficient in the electronic configuration.

For this given configuration (Is²  2s²  2p⁶  3s²  3p⁶  3d¹⁰   4s²    4p¹), "4" is the highest coefficient and the element will certainly belong to period 4 in the periodic table.

To test if the prediction is correct:

Total number of electrons in the given element = 2+2+6+2+6+10+2+1 = 31

The element with atomic number of 31 = Gallium (Ga). (This element belong to period 4).

Answer:

1. Moles of oxygen required to react with 5 moles of C₈H₁₈ = = 62.5 moles of oxygen

2. Mass of oxygen required = 2000 g of oxygen

3. Moles of CO₂ that will be produced = 40 moles of CO₂

4. Mass of CO₂ that will be produced = 1760 g of CO₂

5. Moles of H₂O that will be produced = 45 moles of H₂O

Explanation:

Balanced equation of the reaction : 2 C₈H₁₈ + 25 O₂ ---> 16 CO₂ + 18 H₂O

1. Mole ratio of Oxygen and C₈H₁₈ = 25 : 2

Moles of oxygen required to react with 5 moles of C₈H₁₈ = 5 × 25/2 moles

Moles of oxygen required to react with 5 moles of C₈H₁₈ = = 62.5 moles of oxygen

2. Mass of oxygen required = number of moles of oxygen × molar mass of oxygen

Molar mass of oxygen = 32.0 g/mol

Mass of oxygen required = 62.5 moles × 32.0 g/mol

Mass of oxygen required = 2000 g of oxygen

3. Mole ratio of CO₂ and C₈H₁₈ = 16 : 2

Moles of CO₂ that will be produced = 5 × 16/2 moles

Moles of CO₂ that will be produced = 40 moles of CO₂

4. Mass of CO₂ that will be produced = number of moles of CO₂ × molar mass of CO₂

Molar mass of CO₂ = 44.0 g/mol

Mass of CO₂ that will be produced = 40 moles × 44 g/mol

Mass of CO₂ that will be produced = 1760 g of CO₂

5. Mole ratio of H₂O and C₈H₁₈ = 18 : 2

Moles of H₂O that will be produced = 5 × 18/2 moles of H₂O

Moles of H₂O that will be produced = 45 moles of H₂O

Answer:

two atoms

Explanation:

In its stable molecular form, oxygen exists as two atoms and is written O2. to distinguish it from an atom of oxygen O, or ozone, a molecule of three oxygen atoms, O3. Even though each of these is all oxygen, combining atoms of the same element may give very different properties to the molecule.

Answer:

The meet

Explanation:

Explanation:

Its value is 6.02 kj/mol. This means for every mole of ice we melt we must apply 6.02 kj of heat. We can calculate the heat needed with the following equation:

q

=

n

×

Δ

H

where:

q

= heat

n

= moles

Δ

H

= enthalpy

In this problem we would like to calculate the heat needed to melt 35 grams of ice at 0 °C. This problem can be broken into three steps:

1. Calculate moles of water

2. multiply by the enthalpy of fusion

3. Convert kJ to J

Step 1: Calculating moles of water

35

g

×

(

1

m

o

l

18.02

g

)

=

1.94

m

o

l

s

Step 2: Multiply by enthalpy of fusion

q

=

n

×

Δ

H

=

1.94

×

6.02

=

11.678

k

J

Step 3: Convert kJ to J

11.678

k

J

×

(

1000

J

1

k

J

)

=

11

,

678

J

Finally rounding to 2 sig figs (since 34°C has two sig figs) we get

q

=

12

,

000

J

One last note, if the temperature were not 0 °C then the ice would have to be heated in addition to melted. This would be a phase change problem combined with a heat capacity problem.

Answer:

Sistema Nervioso Autónomo

Explanation:

El Sistema Nervioso es el encargado de enviar señales (impulsos nerviosos en su mayoría) a órganos y partes del cuerpo, para que ejerzan su función. En general, se compone de 3 divisiones o subsistemas:

De éstos, el encargado de acciones y procesos involuntarios es el Sistema Nervioso Autónomo (SNA), que a su vez se divide en simpático y parasimpático. El SNA se encarga de los movimientos involuntarios de órganos, como el corazón, el sistema digestivo, etc., y de regular procesos como la secreción de hormonas y la regulación de la temperatura corporal.

Answer:

The final pressure is approximately 0.78 atm

Explanation:

The original temperature of the gas, T₁ = 263.0 K

The final temperature of the gas, T₂ = 298.0 K

The original volume of the gas, V₁ = 24.0 liters

The final volume of the gas, V₂ = 35.0 liters

The original pressure of the gas, P₁ = 1.00 atm

Let P₂ represent the final pressure, we get;

[tex]\dfrac{P_1 \cdot V_1}{T_1} = \dfrac{P_2 \cdot V_2}{T_2}[/tex]

[tex]P_2 = \dfrac{P_1 \cdot V_1 \cdot T_2}{T_1 \cdot V_2}[/tex]

[tex]P_2 = \dfrac{1 \times 24.0 \times 298}{263.0 \times 35.0} = 0.776969038566[/tex]

∴ The final pressure P₂ ≈ 0.78 atm.

Answer:

hydrogen bonding

Explanation:

Dipole-Dipole, Dispersion, hydrogen bonding and ion bond

Answer:

1 mole of carbonic acid=6.023×10^23 molecules

now

9.74×10^20molecules=

1/(6.023×10^23 molecules)×9.74×10^20molecules

=1.617×10^-3 mole

is your answer.

Answer:

[tex]pH=8.43[/tex]

Explanation:

Hello there!

In this case, since the reaction between benzoic acid and sodium hydroxide is carried out in a 1:1 mole ratio, it is possible to calculate the moles of sodium benzoate salt that are produced due to the neutralization as show below:

[tex]n_{salt}=0.2mol/L*1L=0.2mol[/tex]

We can assume that the volume of benzoic acid is 1 L and therefore the used volume of NaOH is:

[tex]V_{NaOH}=\frac{0.200M*1L}{0.060M}=3.33L[/tex]

Which means that the total final volume is 4.33 L and the concentration of the resulting basic salt is:

[tex][salt]=\frac{0.2mol}{4.33L}=0.046M[/tex]

Next, since the salt is C6H5COONa, we can see it is ionized in Na+ cations and C6H5COO- anions, but just the latter is able to react with the water in the solution in order to undergo the following reaction:

[tex]C_6H_5COO^-+H_2O\rightleftharpoons C_6H_5COOH+OH^-[/tex]

Whose equilibrium expression, it terms of Kb, due to the release of OH- ions, is:

[tex]Kb=\frac{[C6H5COOH][OH^-]}{[C6H5COO^-]}[/tex]

And can be written in terms of x, Kw and Ka:

[tex]\frac{Kw}{Ka} =\frac{x*x}{0.046M-x} \\\\\frac{1x10^{-14}}{6.3x10^{-5}}=1.59x10^{-10}= \frac{x^2}{0.046M-x}[/tex]

And because Kb<<<<<1 we can neglect the x on the bottom to get:

[tex]1.59x10^{-10}= \frac{x^2}{0.046M}[/tex]

Whereas x is computed as follows:

[tex]x=\sqrt{1.59x10^{-10}*{0.046M} =2.7x10^{-6}M[/tex]

Which is actually equal to the concentration of OH- ions so that we can calculate the pOH prior to the pH:

[tex]pOH=-log(2.7x10^{-6})=5.57[/tex]

And therefore the pH as shown below:

[tex]pH=14-5.57\\\\pH=8.43[/tex]

Which makes sense since this sodium benzoate is a basic salt.

Regards!

Answer:

P = 9800 Pa

Explanation:

Given that,

The mass of a box, m = 30 kg

Length of the box, l = 0.2 m

The width of a box, b = 0.15 m

We need to find the pressure it exerted on the floor. Pressure is equal to force acting per unit area. So,

[tex]P=\dfrac{F}{A}\\\\=\dfrac{mg}{lb}\\\\=\dfrac{30\times 9.8}{0.2\times 0.15}\\\\P=9800\ Pa[/tex]

So, 9800 Pa of pressure is exerted on the floor.

Answer: A

Explanation: Bases Don't react with metals, acids do. Salt tend not to have that sort of reaction either.

Since dilute acids can react with metal strips, the solution must be an acid.

An acid is a substance that produces the hydrogen ions in solution. We should note that one of the properties of acids is that their dilute solutions are able to react with metals to evolve hydrogen gas.

As such, if the solution can react with a strip of magnessium then the solution must be an acid.

Learn kore about acids: https://brainly.com/question/365923

Answer:

yo no ablo inglés amigos jjjj

Sublimation. Sublimation is the change of a solid direct to gas or vapour without becoming liquid

Answer:

SEE EXPLANATION

Explanation:

The ion SbF4^- is octahedral in shape. In this compound, Sb which is the central atom in SbF4^- has an expanded octet. This means that it has more than eight electrons in its outermost shell thereby violating the octet rule. Hence the type of violation to the octet rule shown by the compound is expanded octet.

The Sb central atom has a formal charge of -1 as shown in the image attached to this answer.

Answer:

A, D, E

Explanation:

Answer:

0.1

Explanation:

Answer:

The answer is "Option B"

Explanation:

Formula:

Na atoms= Na atoms moles \times  NA

               [tex]= \frac{mass}{Na \ Molar\ mass} \times 6.022 \times 10^{23}\\\\= \frac{9.2}{23} \times 6.022 \times 10^{23}\\\\=0.2875 \times 6.022 \times 10^{23}\\\\=2.4 \times 10^{23}\ atoms \\\\[/tex]

Answer:

1: At temperatures below 542.55 K

2: At temperatures above 660 K

Explanation:

Hello there!

In this case, according to the thermodynamic definition of the Gibbs free energy, it is possible to write the following expression:

[tex]\Delta G=\Delta H-T\Delta S[/tex]

Whereas ΔG=0 for the spontaneous transition. In such a way, we proceed as follows:

1:

[tex]0=\Delta H-T\Delta S\\\\T=\frac{-102kJ/mol}{-0.188kJ/mol-K} \\\\T=542.55K[/tex]

It means that at temperatures lower than 542.55 K the reaction will be spontaneous.

2:

[tex]0=\Delta H-T\Delta S\\\\T=\frac{132kJ/mol}{0.200kJ/mol-K} \\\\T=660K[/tex]

It means that at temperatures higher than 660 K the reaction will be spontaneous.

Best regards!

A sample of aluminum has a density of 2.7g/cm³. The mass of the aluminum is 11g. What would be the volume of the aluminum sample ?

Density of a sample of aluminium is 2.7g/cm³.

The mass of the aluminium is 11g.

The volume of the aluminium sample.

We know,

[tex] { \boxed{\bf{\rm \red {Volume \: = \frac{Mass}{Density}}}}} [/tex]

So, [tex] \bf Volume \: = \frac{11}{2.7} [/tex]

Answer:

The heat contained is 1236 Joules

Explanation:

As we know

[tex]Q = mc\Delta[/tex]T

Where

[tex]\Delta[/tex]T is the change in temperature

m is the mass in grams

c is the specific heat of water (ice) = 2.06 joules/gram

Substituting the given values, we get -

[tex]Q = 20 * (-15+45)*2.06\\Q = 20*2.06*30\\Q = 1236[/tex]Joules

Answer:

No, although the bean crop can grow perfectly in full sun or a little shade in very warm places. It does not mean that they will adopt the growth patterns of the cactus, especially because this plant needs constant watering (in small quantities), very constant. Beans require good drainage for their growth.

Each vegetation have its own characteristics and the power of adaptation. A green bean cannot survive in a desert like a cactus in desert without water. It can only grow thick in soil with proper water content and nutrients.

Cactus is a type of plant grow in dry regions such as deserts. It can adapt in deserts without water for long time because, the plant have enough water storage in its stem.

Domestic vegetation such as bean, pea, nuts etc ill not grow in dry regions because they cannot adapt in deserts without water. The soil in deserts is dry and have no nutrients.

These conditions prevent the growth of vegetables in desert areas. Moreover, desert have summer season only. The extreme temperature over there will cause the normal plants to diminish.

Therefore, planting green bean in deserts will not make it grow thick like a cactus plant.

To refer more about cactus, refer the link below:

https://brainly.com/question/16636755

#SPJ2

Answer:

i want to see a pic but if you got nice toes all give you my number

Explanation:

Answer:

nah Im good

Explanation:

single forever

Answer:matter

Explanation:

matter

make brain