what is the order of solubility of the group ii cations (from 1= most soluble to 4= least soluble)?

The minimum hydroxide concentration required for precipitation to begin is 5.58 x 10⁻³ M.

To determine the minimum hydroxide required for precipitation of Ca2+ from a solution of 0.015 M CaCl2, we need to use the solubility product constant (Ksp) of Ca(OH)2, which is 4.68x10-6.
The balanced chemical equation for the precipitation reaction is:
Ca2+ + 2OH- → Ca(OH)2
We can use stoichiometry to determine the amount of hydroxide required to precipitate all the Ca2+ ions. Since Ca(OH)2 has a 1:2 stoichiometric ratio with Ca2+, we need twice as much hydroxide as the amount of Ca2+ in the solution.
The concentration of Ca2+ in 0.015 M CaCl2 is also 0.015 M. Therefore, we can calculate the minimum amount of hydroxide required as follows:
Ksp = [Ca2+][OH-]2
4.68x10-6 = (0.015 M)(2[OH-])2
[OH-] = √(4.68x10-6 / 0.03)
[OH-] = 0.000228 M
Therefore, the minimum hydroxide required to precipitate all the Ca2+ ions from 0.015 M CaCl2 is 0.000228 M.
To determine the minimum hydroxide (OH⁻) concentration required for precipitation to begin for a 0.015 M CaCl₂ solution, you'll need to use the Ksp value for Ca(OH)₂, which is 4.68 x 10⁻⁶.
First, write the balanced equation for the reaction:
Ca²⁺ + 2OH⁻ → Ca(OH)₂
Now, set up the Ksp expression:
Ksp = [Ca²⁺][OH⁻]²
Plug in the given values and solve for [OH⁻]:
4.68 x 10⁻⁶ = (0.015)([OH⁻]²)
Divide both sides by 0.015:
[OH⁻]² = 3.12 x 10⁻⁵
Now, take the square root to find [OH⁻]:
[OH⁻] = 5.58 x 10⁻³ M
The minimum hydroxide concentration required for precipitation to begin is 5.58 x 10⁻³ M.

To learn more about hydroxide concentration, click here:

brainly.com/question/29286376

#SPJ11

The δgo value at 301 K is approximately -141 kJ/mol, assuming that δho and δso do not significantly change with temperature.

To calculate δgo at 301 K, we need to use the formula:
δgo = δho - Tδso
Where δho is the enthalpy change, δso is the entropy change, T is the temperature in Kelvin, and δgo is the Gibbs free energy change.
Substituting the given values:
δho = -185. kJ/mol
δso = -145. J/mol K
T = 301 K
We need to convert δso from J/mol K to kJ/mol K by dividing it by 1000:
δso = -0.145 kJ/mol K
Now we can calculate δgo:
δgo = -185. kJ/mol - 301 K × (-0.145 kJ/mol K)
δgo = -185. kJ/mol + 43.645 kJ/mol
δgo = -141.355 kJ/mol
Therefore, the δgo value at 301 K is approximately -141 kJ/mol, assuming that δho and δso do not significantly change with temperature.
To calculate ΔG° at 301 K, we will use the Gibbs-Helmholtz equation: ΔG° = ΔH° - TΔS°. Given that ΔH° = -185 kJ and ΔS° = -145 J/mol·K, we can convert ΔS° to kJ/mol·K by dividing by 1000: -145 J/mol·K ÷ 1000 = -0.145 kJ/mol·K.
Now, let's substitute the values into the equation:
ΔG° = -185 kJ - (301 K × -0.145 kJ/mol·K)
ΔG° = -185 kJ + 43.645 kJ
ΔG° = -141.355 kJ
So, the ΔG° value at 301 K is approximately -141.4 kJ (± 2).

To learn more about temperature, click here:

brainly.com/question/28884653

#SPJ11

The final percent yield is approximately 65%, which corresponds to option d. 65%.

To calculate the final percent yield, we'll follow these steps:
1. Calculate the theoretical yield of salicylic acid from aspirin.
2. Calculate the percent yield using the actual yield (5.0 g) and theoretical yield.

1. Theoretical yield:
Aspirin (C9H8O4) has a molecular weight of 180.16 g/mol, and salicylic acid (C7H6O3) has a molecular weight of 138.12 g/mol.

First, find the moles of aspirin:
10.0 g aspirin * (1 mol aspirin / 180.16 g aspirin) = 0.0555 mol aspirin

Now, use the stoichiometry to find the moles of salicylic acid:
0.0555 mol aspirin * (1 mol salicylic acid / 1 mol aspirin) = 0.0555 mol salicylic acid

Finally, find the theoretical yield of salicylic acid:
0.0555 mol salicylic acid * (138.12 g salicylic acid / 1 mol salicylic acid) = 7.67 g salicylic acid

2. Percent yield:
Percent yield = (actual yield / theoretical yield) * 100
Percent yield = (5.0 g / 7.67 g) * 100 = 65.19%

So, the final percent yield is approximately 65%, which corresponds to option d. 65%.

Visit here to learn more about  stoichiometry : https://brainly.com/question/30215297
#SPJ11

So, the volume of the expelled air at 1.6°C is approximately 2.67 liters.

To calculate the volume of the expelled air at 1.6°C, we can use Charles' Law, which states that the volume of a gas is directly proportional to its temperature, provided that the pressure and the amount of gas remain constant. The formula for Charles' Law is:

V1/T1 = V2/T2

where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume, and T2 is the final temperature. In this case:

V1 = 3.0 L
T1 = 36°C + 273.15 = 309.15 K (convert to Kelvin)
V2 = ? (we need to find this)
T2 = 1.6°C + 273.15 = 274.75 K (convert to Kelvin)

Now, we can rearrange the formula and solve for V2:

V2 = V1 * (T2/T1)
V2 = 3.0 L * (274.75 K / 309.15 K)

V2 ≈ 2.67 L

To know more about Charles Law:

https://brainly.com/question/22172610

#SPJ11

A chromium(III) metal ion coordinated to six water molecules results in a complex with a +3 charge.

How do water molecules and chromium combine to generate complex ions?

Hydrogen ions are eliminated from the water ligands bound to the chromium ion by hydrogenoxide ions (from, instance, sodium hydroxide solution). Three of the water molecules must have a hydrogen ion removed in order to create a complex with no charge, or a neutral complex. This forms a precipitate because it is insoluble in water.

A chromium(III) metal ion coordinated to six water molecules results in a complex with a +3 charge. The complex is also referred to as hexaaquachromium(III) ion and is represented by the symbol [Cr(H2O)6]3+.

To learn more about ligands use:

https://brainly.com/question/19517180

#SPJ1

D. Forming opinions based on personal beliefs is NOT one of the common Science and Engineering Practices.

The Science and Engineering Practices (SEPs) aid scientists and engineers in exploring and resolving issues through a set of techniques and abilities.

These practices are interrelated, manifesting concurrently during scientific as well as engineering examinations, aiming to guide learners towards the acquisition of critical thinking capabilities, adept problem-solving skills, besides instilling a scientific temperament.

Learn about scientific method here https://brainly.com/question/17216882

#SPJ1

2-naphthol, also known as β-naphthol, is a compound that exists in both an acidic and basic form. The acid form has a phenolic hydroxyl group, which can act as a proton donor, while the base form has a deprotonated hydroxyl group.

The Lewis structure of the acid form of 2-naphthol shows the phenolic hydroxyl group (-OH) attached to the aromatic ring of naphthalene. This hydroxyl group forms a hydrogen bond with the neighboring oxygen atom in the ring. The Lewis structure of the base form of 2-naphthol shows the deprotonated hydroxyl group (-O-) attached to the ring. The negative charge on the oxygen is delocalized over the ring, making it more stable.

To draw the Lewis structures of the acid and base forms of 2-naphthol, start by drawing the skeletal structure of the naphthalene ring. Next, add the hydroxyl group (-OH) in the acid form or the deprotonated hydroxyl group (-O-) in the base form. Finally, add any lone pairs of electrons or charges to satisfy the octet rule and maintain charge neutrality.

Overall, the Lewis structures for the acid and base forms of 2-naphthol show the different protonation states of the phenolic hydroxyl group and their effect on the electron density of the naphthalene ring.

Learn more about deprotonated hydroxyl group (-O-)

https://brainly.com/question/28024927

#SPJ4

The rate of formation of NOCl, given the rate of [tex]Cl_2[/tex] loss as 4.84 * [tex]10^{-2[/tex] M/s, is: 9.68 * [tex]10^{-2[/tex]M/s.

Determine the rate of reaction with respect to [NOCl]. Given the balanced equation:
2 NO (g) + [tex]Cl_2[/tex] (g) → 2 NOCl (g)

The rate of Cl2 loss is 4.84 * [tex]10^{-2[/tex] M/s. To find the rate of formation of NOCl, we need to compare the stoichiometric coefficients of [tex]Cl_2[/tex] and NOCl in the balanced equation.

Step 1: Identify the stoichiometric coefficients
For [tex]Cl_2[/tex], the coefficient is 1, and for NOCl, the coefficient is 2.

Step 2: Calculate the rate of formation of NOCl
Since the coefficient ratio between NOCl and [tex]Cl_2[/tex] is 2:1, the rate of formation of NOCl is twice the rate of [tex]Cl_2[/tex] loss.

Rate of NOCl formation = 2 * (Rate of [tex]Cl_2[/tex] loss)
Rate of NOCl formation = 2 * (4.84 * [tex]10^{-2[/tex] M/s)

Step 3: Compute the result
Rate of NOCl formation = 9.68 * [tex]10^{-2[/tex] M/s

To know more about "Stoichiometric coefficients" refer here:

https://brainly.com/question/15047541#

#SPJ11

The pH of (a) 0.14 M NH₃ solution at 25°C is 11.12 and (b) 0.049 M C₅H₅N (pyridine) solution at 25°C is 9.25.

To calculate the pH for each solution, first find the pOH using the given Kb values and concentrations, then subtract the pOH from 14.

For (a) 0.14 M NH3:
1. Set up the Kb expression: Kb = [NH₄⁺][OH⁻] / [NH₃]
2. Use the ICE table (Initial, Change, Equilibrium) to find [OH⁻]
3. Solve for x (concentration of OH-) using the quadratic formula or approximation method
4. Calculate pOH = -log10[OH⁻]
5. Calculate pH = 14 - pOH

For (b) 0.049 M C₅H₅N (pyridine):
1. Set up the Kb expression: Kb = [C₅H₅NH⁺][OH⁻] / [C₅H₅N]
2. Use the ICE table to find [OH⁻]
3. Solve for x using the quadratic formula or approximation method
4. Calculate pOH = -log10[OH⁻]
5. Calculate pH = 14 - pOH

To know more about ICE table click on below link:

https://brainly.com/question/30642088#

#SPJ11

The mass of 4.50 x 10^22 atoms of gold, Au, is 14.7 g.

To find the mass of 4.50 x 10^22 atoms of gold (Au), we need to use the following steps:

1. Determine the molar mass of gold (Au). From the periodic table, the molar mass of gold is 197 g/mol.

2. Calculate the number of moles of gold atoms by using Avogadro's number (6.022 x 10^23 atoms/mol). Divide the number of atoms (4.50 x 10^22) by Avogadro's number:

  (4.50 x 10^22 atoms) / (6.022 x 10^23 atoms/mol) = 0.0748 mol

3. Multiply the number of moles by the molar mass to get the mass of gold atoms:

  (0.0748 mol) x (197 g/mol) = 14.7 g

So, the mass of 4.50 x 10^22 atoms of gold (Au) is 14.7 g.

Learn more about molar mass at https://brainly.com/question/837939

#SPJ11

Answer:

In a positive ion, the number of electrons are less than the number of protons.

Explanation:

Answer:

A positive ion, also known as a cation, is formed when an atom loses one or more electrons. Electrons are negatively charged particles that orbit the nucleus of an atom. The nucleus contains positively charged particles called protons and neutral particles called neutrons.

In a neutral atom, the number of electrons is equal to the number of protons. When an atom loses one or more electrons, the balance between the number of protons and electrons is disrupted. Since there are now more protons than electrons, the atom becomes positively charged and is now a cation.

For example, when a sodium atom (Na) loses one electron, it becomes a sodium cation (Na+). The sodium atom has 11 protons and 11 electrons. When it loses one electron, it now has 11 protons and 10 electrons. Since there is one more proton than an electron, the sodium cation has a charge of +1.

The pH of a buffer solution containing an acid with a pKa of 7.3 and an acid concentration equivalent to that of its conjugate base is 7.3. This can be calculated using the Henderson-Hasselbalch equation.

If a buffer solution contains an acid with a pKa of 7.3 and an acid concentration equivalent to that of its conjugate base, the pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])[/tex]

Where:

pKa = 7.3 (given)

[A-] = concentration of the conjugate base (equal to the concentration of the acid)

[HA] = concentration of the acid

Since the acid concentration is equivalent to that of its conjugate base, [tex][A-]/[HA] = 1[/tex]

Therefore:

pH = 7.3 + log(1)

pH = 7.3

So, the pH of the buffer solution would be 7.3.

Learn more about buffer solutions at

brainly.com/question/24262133

#SPJ4

To prepare 250 mL of a 0.700 M KNO3 solution, you will need to calculate the grams of KNO3 required. You will need 17.69 grams of KNO3 to prepare 250 mL of a 0.700 M solution.

To prepare a 250ml solution of 0.700m, you will need to use the formula:
molarity = moles of solute / liters of solution
First, let's calculate the number of moles of solute required:
moles of solute = molarity x liters of solution
moles of solute = 0.700m x 0.250L
moles of solute = 0.175 moles
Next, we need to convert moles of solute into grams of KNO3, using its molar mass:
molar mass of KNO3 = 101.1032 g/mol
grams of KNO3 = moles of solute x molar mass
grams of KNO3 = 0.175 moles x 101.1032 g/mol
grams of KNO3 = 17.6736 grams
Therefore, you will need 17.6736 grams of KNO3 to prepare 250ml of a 0.700m solution.

Learn more about solution here:

https://brainly.com/question/6566593

#SPJ11

To calculate the pH of a 0.2 M solution of acetic acid, we need to use the dissociation equation of acetic acid:

[tex]CH_{3} COOH[/tex]⇌ [tex]CH_{3} COO^{-} + H^{+}[/tex]

The equilibrium constant expression for this reaction is:

Ka = [[tex]CH_{3} COO^{-}[/tex]][[tex]H^{+}[/tex]] / [[tex]CH_{3} COOH[/tex]]

At equilibrium, we can assume that [[tex]CH_{3} COO^{-}[/tex]] ≈ [[tex]H^{+}[/tex]], since the dissociation of acetic acid is relatively small. Therefore, we can simplify the equation as:

Ka = [tex][H^{+} ]^2[/tex] / [[tex]CH_{3} COOH[/tex]]

Rearranging this equation gives:

[tex][H^{+} ]^2[/tex] = sqrt(Ka * [[tex]CH_{3} COOH[/tex]])

We are given that the concentration of acetic acid is 0.2 M. Substituting this value and the given Ka value, we get:

[[tex]H^{+}[/tex]] = sqrt(1.75 x [tex]10^{-5}[/tex] * 0.2) = 0.0026 M

Taking the negative logarithm of this value gives the pH:

pH = -log[[tex]H^{+}[/tex]] = -log(0.0026) = 2.59

Therefore, the pH of a 0.2 M solution of acetic acid with a Ka value of 1.75 x [tex]10^{-5}[/tex] is 2.59, which should be rounded to two significant figures, giving a final answer of pH = 2.6.

Learn more about acetic acid

https://brainly.com/question/16970860

#SPJ4

To calculate the pH of the solution resulting from mixing benzoic acid and sodium benzoate, we need to first determine the concentrations of the benzoic acid and benzoate ions in the solution.

Using the formula for calculating the concentration of the benzoate ion:

[benzoate] = (volume of sodium benzoate x concentration of sodium benzoate) / total volume of solution

[benzoate] = (33.1 mL x 0.14 M) / (26.8 mL + 33.1 mL) = 0.100 M

Similarly, the concentration of the benzoic acid can be calculated:

[benzoic acid] = (volume of benzoic acid x concentration of benzoic acid) / total volume of solution

[benzoic acid] = (26.8 mL x 0.11 M) / (26.8 mL + 33.1 mL) = 0.089 M

Using the Ka value for benzoic acid, we can then calculate the concentration of H+ ions in the solution:

Ka = [H+][benzoate] / [benzoic acid]

[H+] = Ka x [benzoic acid] / [benzoate]

[H+] = (6.5 x 10^-5) x (0.089) / (0.100) = 5.8 x 10^-5 M

Finally, we can calculate the pH using the formula:

pH = -log[H+]

pH = -log(5.8 x 10^-5) = 4.24

Therefore, the pH of the solution resulting from mixing 26.8 mL of 0.11 M benzoic acid with 33.1 mL of 0.14 M sodium benzoate is 4.24.

Learn more about  benzoic acid   here:

https://brainly.com/question/24052816

#SPJ11

The pair of species X+ and Y will react under standard conditions at 25°C if their combined standard electrode potentials (E°) result in a positive overall cell potential (ΔE°).

To determine if species X+ and Y will react under standard conditions at 25°C, you need to follow these steps:

1. Identify the half-reactions for each species (X+ and Y).
2. Look up the standard electrode potentials (E°) for each half-reaction in a table of standard reduction potentials.
3. Determine the overall cell potential (ΔE°) by subtracting the E° of the half-reaction being oxidized from the E° of the half-reaction being reduced (ΔE° = E°reduction - E°oxidation).
4. If the overall cell potential (ΔE°) is positive, the reaction will be spontaneous under standard conditions at 25°C, and the species X+ and Y will react.
5. Electrochemical measurements can be employed to analyze chemical systems, by determining the spontaneity of the reaction and monitoring the progress of the reaction.

To know more about standard electrode potentials click on below link:

https://brainly.com/question/2284529#

#SPJ11

A) To find Kc, we need to use the relationship Kp = Kc(RT)^(Δn), where Δn is the difference in moles between the products and reactants. For the reaction I2(g)⇌2I(g), Δn = 2 - 1 = 1, since there is one mole of gas on the reactant side and two moles of gas on the product side. Therefore, we have:

Kc = Kp/RT^(Δn)

Kc = (6.26×10^(-22))/(8.314 J/K/mol × 298 K)^(1)

Kc = 2.35×10^(-26)

B) For the reaction CH4(g)+H2O(g)⇌CO(g)+3H2(g), Δn = (1+1) - (1+3) = -2, since there are two moles of gas on the reactant side and four moles of gas on the product side. Therefore, we have:

Kc = Kp/RT^(Δn)

Kc = (7.7×10^(24))/(8.314 J/K/mol × 298 K)^(-2)

Kc = 5.6×10^(5)

C) For the reaction I2(g)+Cl2(g)⇌2ICl(g), Δn = (2+0) - (0+2) = 0, since there are two moles of gas on both the reactant and product sides. Therefore, we have:

Kc = Kp/RT^(Δn)

Kc = 81.9/((8.314 J/K/mol × 298 K)^(0))

Kc = 81.9

Learn more about  Kc for the reaction here:

https://brainly.com/question/21406244

#SPJ11

2NaI + 2H₂O → 2Na + I2 + O₂ + 4H+ + 4I-  is the initial product formed at the cathodeand at the anode

When a 1.0 M aqueous solution of NaI is electrolyzed, the initial product formed at the cathode and at the anode will depend on the applied voltage and the nature of the electrodes used.

Assuming that inert electrodes, such as platinum electrodes, are used and the applied voltage is sufficient to overcome the activation energy for the reduction and oxidation reactions, the initial products formed will be:

At the cathode: Sodium ions (Na+) will be reduced to form metallic sodium (Na) and iodide ions (I-) will not be reduced. Therefore, the initial product formed at the cathode will be metallic sodium (Na).

2Na+ + 2e- → 2Na (cathode)

At the anode: Iodide ions (I-) will be oxidized to form elemental iodine (I₂) and water (H₂O) will be oxidized to form oxygen gas (O₂) and hydrogen ions (H+). The dominant product will depend on the concentration of iodide ions relative to water. If the iodide ion concentration is high, then iodine will be the main product, and if the water concentration is high, then oxygen gas will be the main product.

2I- → I2 + 2e- (anode)

2H₂O → O₂ + 4H+ + 4e- (anode)

Overall reaction:

2NaI + 2H₂O → 2Na + I2 + O₂ + 4H+ + 4I-

Learn more about cathodeand

https://brainly.com/question/31560182

#SPJ4

The net ionic equation for the reaction of MgSO4 with Sr(NO3)2 is:
SO42-(aq) + Sr2+(aq) → SrSO4(s)

The net ionic equation of the reaction of MgSO4 with Sr(NO3)2 can be determined by writing the balanced chemical equation and then canceling out the spectator ions that appear on both the reactant and product sides of the equation.

The balanced chemical equation for the reaction is:

MgSO4(aq) + Sr(NO3)2(aq) → Mg(NO3)2(aq) + SrSO4(s)

To write the net ionic equation, we must first identify the ions that are involved in the reaction. In this case, the aqueous solutions contain Mg2+, SO42-, Sr2+, and NO3-.

The spectator ions, which do not participate in the reaction, are Mg2+ and NO3-. Therefore, we can cancel them out to write the net ionic equation as:

SO42-(aq) + Sr2+(aq) → SrSO4(s)

This equation shows the ions that are involved in the reaction and the formation of the solid precipitate SrSO4. The phases for the different species are also included in the equation.

To know more about spectator ions refer to

https://brainly.com/question/9512088

#SPJ11

The net ionic equation for the reaction of MgSO4 with Sr(NO3)2 is:
SO42-(aq) + Sr2+(aq) → SrSO4(s)

The net ionic equation of the reaction of MgSO4 with Sr(NO3)2 can be determined by writing the balanced chemical equation and then canceling out the spectator ions that appear on both the reactant and product sides of the equation.

The balanced chemical equation for the reaction is:

MgSO4(aq) + Sr(NO3)2(aq) → Mg(NO3)2(aq) + SrSO4(s)

To write the net ionic equation, we must first identify the ions that are involved in the reaction. In this case, the aqueous solutions contain Mg2+, SO42-, Sr2+, and NO3-.

The spectator ions, which do not participate in the reaction, are Mg2+ and NO3-. Therefore, we can cancel them out to write the net ionic equation as:

SO42-(aq) + Sr2+(aq) → SrSO4(s)

This equation shows the ions that are involved in the reaction and the formation of the solid precipitate SrSO4. The phases for the different species are also included in the equation.

To know more about spectator ions refer to

https://brainly.com/question/9512088

#SPJ11

The percent dissociation of 0.40 M butyric acid (HC4H7O2) is approximately 0.24%. The correct option is A. To determine the percent dissociation of 0.40 M butyric acid (HC4H7O2), we first need to calculate the concentration of dissociated ions using the given Ka value (1.48 x 10^-5).

Step 1: Set up the equilibrium expression:
Ka = [C4H7O2-][H+]/[HC4H7O2]

Step 2: Assume a small amount (x) of HC4H7O2 dissociates into ions:
1.48 x 10^-5 = (x)(x)/(0.40 - x)

Step 3: Solve for x (the concentration of dissociated ions) using the quadratic formula or approximations (since Ka is small, x is also small, so we can assume 0.40 - x ≈ 0.40):
x ≈ √(1.48 x 10^-5 * 0.40) ≈ 9.62 x 10^-4 M

Step 4: Calculate the percent dissociation:
Percent dissociation = (x / initial concentration) * 100
Percent dissociation = (9.62 x 10^-4 / 0.40) * 100 ≈ 0.24%.

To know more about percent dissociation refer here:

https://brainly.com/question/16848897#

#SPJ11

In heavy exercise, CO₂ accumulates due to increased respiration, causing blood [H⁺] to increase and pH to decrease (Option A).

During heavy exercise, the body's demand for oxygen increases, leading to a rise in respiration. This results in an accumulation of carbon dioxide (CO₂) in the bloodstream.

CO₂ reacts with water to form carbonic acid (H₂CO₃), which then dissociates into hydrogen ions (H⁺) and bicarbonate ions (HCO₃⁻). As the concentration of H⁺ ions increases, the pH level of the blood decreases, becoming more acidic.

This process is vital for maintaining the body's acid-base balance, and the respiratory system and kidneys work together to remove excess CO₂ and H⁺ ions to restore blood pH to its normal range.(A)

To know more about pH click on below link:

https://brainly.com/question/491373#

#SPJ11

The energy associated with one photon of electromagnetic radiation is given by the equation E=hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength.

To find the energy associated with 1.00 mol photons, we first need to find the energy of one photon and then multiply it by Avogadro's number (6.022 x 10^23) to get the energy of 1.00 mol photons.

Using the given wavelength of 2.55 x 10^-14 m, we can calculate the energy of one photon as:

E = hc/λ
E = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (2.55 x 10^-14 m)
E = 2.454 x 10^-19 J

Multiplying by Avogadro's number gives us the energy of 1.00 mol photons:

E(mol) = E(photon) x N_A
E(mol) = (2.454 x 10^-19 J) x (6.022 x 10^23)
E(mol) = 1.475 x 10^5 J/mol

Therefore, the answer is not one of the given choices. The correct answer is 1.475 x 10^5 J/mol.

Learn more about wavelength here:

https://brainly.com/question/31143857

#SPJ11

Answer:

d. 180°

Explanation:

Linear means flat, and flat means that it makes a perfect angle of 180°!

The balanced chemical equation for the reaction between aqueous sodium hydroxide and lead(ll) nitrate is:

2NaOH(aq) + Pb(NO3)2(aq) → Pb(OH)2(s) + 2NaNO3(aq)

When additional aqueous hydroxide is added, the precipitate redissolves and forms a soluble [Pb(OH)4]2-(aq) complex ion. The balanced chemical equation for this reaction is:

Pb(OH)2(s) + 2NaOH(aq) + 2H2O(l) → [Pb(OH)4]2-(aq) + 2Na+(aq)

Note that water (H2O) is also a reactant in this reaction.
When aqueous sodium hydroxide is added to a solution containing lead(II) nitrate, a solid precipitate forms as shown in the balanced chemical equation:

2NaOH(aq) + Pb(NO3)2(aq) -> Pb(OH)2(s) + 2NaNO3(aq)

However, when additional aqueous hydroxide is added, the precipitate redissolves forming a soluble [Pb(OH)4]2- complex ion:

Pb(OH)2(s) + 2OH-(aq) -> [Pb(OH)4]2-(aq)

Visit here to learn more about precipitate brainly.com/question/30904755
#SPJ11

The pH after the addition of each volume of acid is: (a) 11.72, (b) 3.15, (c) 2.28.

The reaction between NaOH and HCl is a neutralization reaction, which produces NaCl and H2O. In this reaction, the acid (HCl) reacts with the base (NaOH) to form water and a salt.

To calculate the pH after the addition of each volume of acid, we need to use the stoichiometry of the reaction and the Henderson-Hasselbalch equation. The initial concentration of NaOH is 0.116 M, and the initial volume is 50.0 mL. The volume of HCl added at each step is:

(a) 5.0 mL: The total volume is 55.0 mL. The number of moles of HCl added is 0.0750 M x 0.0050 L = 3.75 x 10^-4 mol. The number of moles of NaOH is 0.116 M x 0.0500 L = 5.80 x 10^-3 mol. After the reaction, the number of moles of NaOH remaining is 5.80 x 10^-3 mol - 3.75 x 10^-4 mol = 5.43 x 10^-3 mol.

The concentration of NaOH is 5.43 x 10^-3 mol / 0.055 L = 0.099 M. The pH is calculated using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]), where pKa is the dissociation constant of water (14), [A-] is the concentration of the conjugate base (Na+), and [HA] is the concentration of the acid (H2O).

The pH after the addition of 5.0 mL of HCl is 11.72.

(b) 50 mL: The total volume is 100.0 mL. The number of moles of HCl added is 0.0750 M x 0.0500 L = 3.75 x 10^-3 mol. The number of moles of NaOH is 0.116 M x 0.0500 L = 5.80 x 10^-3 mol. After the reaction, the number of moles of HCl remaining is 3.75 x 10^-3 mol - 5.80 x 10^-3 mol = -2.05 x 10^-3 mol.

The concentration of HCl is -2.05 x 10^-3 mol / 0.100 L = -0.0205 M (negative because there is excess base). The pH is calculated using the Henderson-Hasselbalch equation, and the pH after the addition of 50 mL of HCl is 3.15.

(c) 0.10 L: The total volume is 150.0 mL. The number of moles of HCl added is 0.0750 M x 0.1000 L = 7.50 x 10^-3 mol. The number of moles of NaOH is 0.116 M x 0.0500 L = 5.80 x 10^-3 mol. After the reaction, the number of moles of HCl remaining is 7.50 x 10^-3 mol - 5.80 x 10^-3 mol = 1.70 x 10^-3 mol. The concentration of HCl is 1.70 x 10^-3 mol / 0.

For more questions like Reaction click the link below:

https://brainly.com/question/30086875

#SPJ11

Sodium sulfate dry a solution intramolecular forces by attract and bind with water molecules.

Sodium sulfate is a salt that has the ability to absorb water molecules from a solution through a process called hydration. When sodium sulfate is added to a solution, it can attract and bind with water molecules, which decreases the amount of water present in the solution. This process is driven by the intramolecular forces between sodium ions and water molecules.

Intramolecular forces are the forces that exist between atoms within a molecule. In the case of sodium sulfate, the intramolecular forces between the sodium and sulfate ions are strong enough to allow them to attract and bind with water molecules. As a result, the water molecules become trapped within the crystal structure of the sodium sulfate, effectively removing them from the solution.

The removal of water from a solution can have several effects. It can increase the concentration of solutes in the solution, making it more viscous and less likely to freeze at low temperatures. It can also decrease the pH of the solution, as the water molecules that are removed often play a role in maintaining the pH balance.

Overall, the ability of sodium sulfate to dry a solution is due to its strong intramolecular forces, which allow it to attract and bind with water molecules. This process effectively removes water from the solution, resulting in a more concentrated and stable mixture.

Learn more about intramolecular forces: https://brainly.com/question/30788811

#SPJ11

The expected mass of solid sulfur consumed at equilibrium is 1.6 kg.

The balanced chemical equation for the reaction is:

S(s) + O₂(g) ⇌ SO₂(g)

The equilibrium constant expression for this reaction is:

K = [SO₂]/[S][O₂]

where [SO₂], [S], and [O₂] are the molar concentrations of SO₂, S, and O₂ at equilibrium.

Given the initial conditions of the reaction and the equilibrium constant, we can set up an ICE (initial, change, equilibrium) table and solve for the equilibrium concentrations of the species:

S(s) + O₂(g) ⇌ SO₂(g)
I 4.8 kg 10.0 atm 0

C -x -x +x

E 4.8-x 10.0-x x

Using the ideal gas law, we can convert the partial pressure of oxygen to the molar concentration:

[P(O₂)]/[RT/V] = n(O2)/V

[10.0 atm]/[(0.08206 L·atm/K·mol)(550°C + 273.15 K)/75.0 L] = n(O₂)/75.0 L

n(O₂) = 0.261 mol

Substituting the equilibrium concentrations into the equilibrium constant expression and solving for x, we get:

K = [SO₂]/[S][O₂]

3.7 = x/(4.8-x)(0.261)

x = 1.6 kg

As a result, the mass of solid sulphur consumed at equilibrium is 1.6 kg.

To know more about the Sulfuric acid, here

https://brainly.com/question/15297259

#SPJ4

The  volume would increase if the pressure were decreasing. This demonstrates an inverse proportion.

According to Boyle's law, "The final pressure of a gas is inversely proportional to the change in volume  of the gas at constant temperature and number of moles."

This law is represented as

P∝ 1/V

or PV= constant.

Let us consider a closed container containing gas,  if the pressure exerted on the gas is increased the gas molecules will become compressed and will become small is volume as compared to the volume occupied by the molecules before increasing the pressure, where they were moving apart from each other randomly.

On the other hand, volume is directly proportional to the temperature of the gas at constant pressure and number of moles. This is Charles's law.

To know more about Boyle's law here

https://brainly.com/question/9775072

#SPJ4

All of the following ground-state electron configurations are correct except  Cu:[Ar] 4s¹3d¹⁰.(A)

Copper (Cu) has an anomalous electron configuration, which results from the half-filled 4s and fully-filled 3d subshells being more stable.

Therefore, the correct ground-state electron configuration for Cu should be [Ar] 4s²3d⁹, not [Ar] 4s¹3d¹⁰.

The rest of the electron configurations (b. In:[Kr]5s²4d¹⁰5p¹, c. Ca:[Ar]4s², d. I:[Kr]5s²4d¹⁰5p⁵, and e. Fe:[Ar]4s²3d⁵) are correct for their respective elements, as they follow the general rules for filling electron orbitals in the periodic table.(A)

To know more about electron configurations click on below link:

https://brainly.com/question/29757010#

#SPJ11

"Water is an effective solvent for living systems because of its inert behavior" is not entirely accurate.

Water is considered an effective solvent for living systems because of its ability to dissolve various types of molecules such as salts, sugars, and proteins. This is due to the polarity of water molecules and the hydrogen bonding between them. Additionally, water is not completely inert as it can participate in chemical reactions, such as hydrolysis and dehydration synthesis. Therefore, it is the combination of water's polarity and reactivity that make it an effective solvent for living systems. These characteristics make water a crucial component in living systems, as it can facilitate various biochemical reactions and transport essential nutrients and waste materials.

To know more about Water:

https://brainly.com/question/4159431

#SPJ11