The net charge on the Peptide sequence: DSVK at pH = 0 is : a. net charge = +2.
What is peptide sequence?The process of identifying the amino acids that make up a peptide chain's structural sequence is known as peptide sequencing. This knowledge must be made public in order to understand the structure and function of a protein within a cell, which is useful for biomedical research applications.
By convention, the names of peptides are always written from left to right, beginning with the N-terminal end. For example, the name glycyl-histidine-phenylalanine refers to a peptide that comprises glycine at the N-terminus, followed by a histidine, and then phenylalanine at the C-terminus.
To know more about peptide sequencing , refer
https://brainly.com/question/14775253
#SPJ4
Which component of the periodic table is needed to determine why KCl tastes like NaCl? A. Group B. Period C. Atomic Weight D. Atomic Number
Atomic Number of the periodic table is needed to determine why KCl tastes like NaCl.
What is the Periodic Table?
The Periodic Table is a tabular arrangement of the chemical elements organized by atomic number, electron configuration, and recurring chemical properties. It is one of the most important tools in chemistry, providing a useful framework to classify, systematize, and predict the properties of elements.
Atomic numbers are used to identify each element in the periodic table, and they are also used to determine the number of protons in the nucleus of an atom. The number of protons in an atom determines its chemical properties, and the similarity in the number of protons between two elements can explain why they have similar properties. In this case, the similarity in the atomic number of potassium (K, atomic number 19) and sodium (Na, atomic number 11) explains why the salts of both elements, potassium chloride (KCl) and sodium chloride (NaCl), taste the same.
Hence, Option D is correct.
To know more about the Periodic Table,
https://brainly.com/question/15987580
#SPJ4
Would using king size bags of M&M's make a difference to the average "atomic mass"? Why or why not?
No, because every M&M's is identical.
M&M's contain the same amount of protons, M&M's are the same hue. In other words, the size represents the various neutron counts.
Atoms of the same chemical element called isotopes each have a distinct mass number.
While isotopes can vary in mass, they never do so in atomic number (the amount of protons). You will use M&Ms to represent atoms because we are unable to see them. These objectives are use in M&Ms to determine the average atomic mass and to observe how different isotopes are.
In this the number show how many M&M's of that color and size are packed into that bags.
To know more about, Isotopes click here:
brainly.com/question/11680817
#SPJ4
what percent composition tell you about a molecule
Answer:
tells you by mass what percent of each element is present in a compound.
Explanation:
How many grams is 0.5 moles?
0.5 moles of carbon weigh 6.0055 grams.
One of the chemical elements is carbon. The letter C stands for carbon, and the letter g stands for grams. As a result, 0.5 moles of carbon per gram is equivalent to 0.5 moles of carbon per gram, 0.5 moles of carbon per gram, and 0.5 moles of C per gram.
Carbon has a 12.011 atomic mass. Thus, one mole of carbon has a mass of 12.011 grams (12.011 g/mol). We multiply 0.5 moles of carbon by 12.011 to get grams, and vice versa.
no. of Grams = Moles of Carbon x 12.011
=0.5 × 12.011 = 6.0055
0.5 moles of carbon equal 6.0055 grams.
To learn more about moles click here
https://brainly.com/question/15356425
#SPJ4
The complete question is
How many grams is 0.5 moles of carbon
How many total ATP are produced during glycolysis ?
During glycolysis, each G3P produces two ATP, for a total of four ATP per glucose molecule.
What is glycolysis?The metabolic mechanism that transforms glucose to pyruvate is known as glycolysis. This free energy is utilized to create the high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide. Glycolysis is a series of 10 enzyme-catalyzed processes. The initial stage in the breakdown of glucose to extract energy for cellular metabolism is glycolysis. Glycolysis is divided into two phases: energy-requiring and energy-releasing. Glycolysis is the process of breaking down glucose to create energy. It generates two pyruvate molecules, ATP, NADH, and water. The process occurs in a cell's cytoplasm and does not require oxygen. It can be found in aerobic and anaerobic organisms.
Here,
Each G3P produces two ATP during glycolysis, for a total of four ATP per glucose molecule.
To know more about glycolysis,
https://brainly.com/question/14076989
#SPJ4
F app F fric F norm F grav Which statement best describes the forces shown in this picture? A. The force of friction and the gravitational force are balanced. B. The force of friction is less than the applied force. C. The normal force and the gravitational force are balanced. D. All four forces are acting on the student.
He is not falling nor about to fall which means he’s perfectly balanced. So this means the force in the photo and friction in this photo is in a balanced condition, balancing the boy.
How forces are balanced?In the given picture, the applied force and the force of friction are balanced. if two forces act in the direction to make the object in a balanced state.
If the forces are in a balanced state it does not change the motion of the object, and if it is in an unbalanced state, it causes to change in the state of the motion.
Therefore, the force of friction and the gravitational force are balanced is the correct option.
Learn more about forces, here:
https://brainly.com/question/28458730
#SPJ1
The given question is incomplete, so the complete question image is attached in the image below.
mendeleev is given the most credit for the concept of a periodic table of the elements because:
Mendeleev is given the most credit for the concept of a periodic table of the elements because he emphasized its usefulness in predicting the existence and properties of unknown elements.
What is Periodic table?This is referred to as a tabular arrangement of the chemical elements by increasing atomic number which displays the elements so that one may see trends in their properties.
It consists of a rows and columns arrangement of the chemical elements and each they are grouped according ti the similar features which are present in the elements.
Mendeleev was the scientist who was given the most credit for the concept of a periodic table of the elements despite others working on it previously as a result of his emphasis in its usefulness in predicting the existence and properties of unknown elements.
Read more about Periodic table here https://brainly.com/question/1173237
#SPJ1
Which isotope, when bombarded with nitrogen-15, yields the artificial isotope dubnium-260 plus 4 neutrons
The isotope that when bombarded with nitrogen-15 yields the artificial isotope dubnium-260 plus 4 neutrons is californium-249.
Californium-249 is a heavy element and when bombarded with nitrogen-15, which is a light element, undergoes a nuclear reaction known as a "cold" fusion reaction. This reaction results in the formation of the artificial isotope dubnium-260, which has a higher atomic number than the starting element and the release of 4 neutrons.This process is known as a Nuclear Transmutation, which is a process in which one element is converted into another element by bombarding it with a beam of particles such as protons, neutrons, or other ions.
learn more about isotope here:
https://brainly.com/question/11394246
#SPJ4
How many grams of magnesium
sulfate (MgSO4) are dissolved in
0. 965 L of a 0. 0575 M solution?
Molar Mass Mg: 24. 30 g/mol
Molar Mass S: 32. 06 g/mol
Molar Mass O: 16. 00 g/mol
Magnesium sulfate, or MgSO₄, weighs 6.68 g, and dissolves about 0. 965 L of the a 0. 0575 M solutions.
For what use in chemistry?A solution is created when a solvent and a solute, two different compounds, are mixed together. When a salt and a solvents is mixed, a solution is created. Commonly, one substance will dissolve in another to create a solution, such as when salt dissolves in water. Nevertheless, a solution can be produced under any state of matter.
Molar mass MgSO₄ = 120.36 g/mol
You have a 0.0575 M solution
That is equal to 6.9207 g/L or 0.0575 mol/L * 120.36 g/mol.
But you want mass in 0.965 L
Mass equals 0.965 L times 6.9207 g/L, or 6.68 g.
To know more about Solution visit:
https://brainly.com/question/25326161
#SPJ4
Tungsten 188 decays by beta. Find the daughter product.
daughter product (mass.atomic/,element symbol);
By beta, tungsten 188 decays. The mechanism through which an insecure atomic structure is produced is known as radioactive decay.
How does radioactive decay work?The process through which highly unstable molecular nucleus loses its energy through radiation is described as radioactive decay, also characterized as nuclear decay, radiography, radioactivity breakdown, or nuclear disintegration. A substance that has unstable nuclei is regarded as radioactive. For a large variety of human activities, radioactive decay is crucial.
What occurs when radioactive material decays?Alpha, beta, and/or gamma rays are all types of ionizing radiation that are released when radioactive atoms decay. Because the energy is powerful enough to dislodge firmly coupled electrons from just an atom's orbit, it is known as ionizing radiation. As a result, the atom develops into a charged ion.
To know more about radioactive decay visit:
https://brainly.com/question/1770619
#SPJ1
In the lab, the dominant phenotype for sheep color is wool and the recessive phenotype for sheep color is wool
The dominant phenotype for sheep color is wool because it is the most common color seen in sheep.
What do you mean by Phenotype?
Phenotype is the physical, biochemical, and physiological characteristics of an organism, as determined by both genetic makeup and environmental influences. It is the physical expression of an organism's genes, and can be seen in its morphology, development, and behavior.
Wool is usually white or off-white in color and is the result of a dominant gene. The recessive phenotype for sheep color is non-wool, which is usually a darker color, such as black, brown, or gray. This is the result of a recessive gene and is less common than the dominant gene.
To know more about Phenotype,
https://brainly.com/question/902712
#SPJ4
An 80.0-gram sample of water at 10.00C absorbs 1680 Joules of heat energy. What is the final temperature of the water
108°C is the final temperature of the water after absorption of 1680 Joules of heat energy.
What is temperature?Temperature is a physical quantity used to measure the average kinetic energy of molecules in matter. This is measured with a thermometer or other device that measures the average kinetic energy of the molecules within the substance. The terms Celsius (°C), Fahrenheit (°F), or Kelvin are commonly used to describe temperature (K). Temperature can affect the physical state of matter.
By rearranging the equation gives:
ΔT = q/mc
Plugging in the given values,
ΔT = 1680/ (80.0 g × 4.184 J/g·C)
= 98°C.
Since the initial temperature was 10°C, the final temperature is:
ΔT = T₂ - T₁
98°C = T₂ - 10
T₂ = 108°C
To learn more about Temperature
https://brainly.com/question/25384702
#SPJ4
How many cm is meter stick?
100 cm is meter stick.
Centimeter is denoted by the (cm). It is a metric unit of the measurement which is used for measuring the length of an object.
Meterstick is a foldable ruler which is used to measure the length, and it is common in the construction industry. They are made up of wood or plastic and often they have a plastic or metal joints so that they can be folded together.
A meter measuring stick, which is one meter (39.37 inches) long, it contains 100 centimeters. Thus, centimeter is equal to one-hundredth of a meter. The word centimeter comes from the late 18th-century. The word centimeter derived from the Latin root "centum"/ means "hundred" and the Greek root "metron", meaning "measure".
To know more about length here
https://brainly.com/question/30100801
#SPJ4
Heat conservation is important for polar endotherms, thus they tend to be _________ so that they __________ their surface area to volume
Polar endotherms must save heat, hence they usually have a significant surface area to volume ratio. The capacity to maintain blood is what makes heat conservation unique.
Vasoconstriction keeps it in the centre by decreasing blood flow to the outside (also known as peripheral vasoconstriction). An endotherm is an organism that uses heat produced by its internal biological processes rather than nearly exclusively relying on ambient heat to keep its body at a metabolically advantageous temperature. In thermodynamics, heat is defined as a kind of energy that crosses a thermodynamic system's boundary due to a temperature differential across the barrier. Heat is not present in a thermodynamic system.
Learn more about heat here
https://brainly.com/question/28302909
#SPJ4
Show all your work and make sure to label all the numbers with the correct units if you do, I will give you brainliest, 5 stars, and a thank you:
A: A sample of sulfuric acid has a mass of 15.0 g. How many molecules are in this sample?
B: How many moles of sulfuric acid are present in 45 g of this sample?
C: How much would a .750 mole sample of Ammonium sulfate weigh?
D: What is the mass percent of hydrogen in this sample?
The freezing of methane is an exothermic change. What best describes the temperature conditions that are likely to make this a spontaneous change
The correct answer is option C: Low temperature only, because entropy decreases during freezing.
When a substance changes from a gas to a solid, the entropy (measure of disorder) of the system decreases. This is because the solid has a more ordered structure than the gas. The decrease in entropy is accompanied by a decrease in temperature and an increase in enthalpy (heat content).For a process to be spontaneous, the entropy change must be positive, so the freezing of methane is spontaneous only if the temperature of the surroundings is lower than the temperature of the methane. Thus, the heat released from the exothermic process will be absorbed by the surroundings, the temperature of the methane will decrease, and the entropy of the system increases, driving the process towards completion.
Learn more about entropy here:
https://brainly.com/question/15025401
#SPJ4
The complete question is :
Methane freezing is an exothermic process. Which of the following best describes the temperature conditions that are most likely to cause this spontaneous change? Because entropy increases during freezing, any temperature. Because entropy decreases during freezing, any temperature. Only at low temperatures because entropy decreases during freezing. Only at high temperatures, as entropy
suppose scientist have found three oxide materials that could potentially be used as a cathode to a magnesium or sodium anode in a battery for electrons plan an investigation to determine the best battery what characteristics did you test for
The sodium is the anode of the cell while the magnesium is the cathode of the cell.
How would the investigation go?We know that in the cell, we are going to have just about two electrodes in the cell and we would have the cathode and the anode. We have to know that the cathode is the point by which the current would enter the cell and the cathode is the point from which the current would leave the cell.
Having said this, we should know that the investigation would have to take into account the reduction potentials of the magnesium as well as that of the sodium as these can be used in the construction of the cell that is under study here.
Hence, by consideration of the electrode potentials, we can see that the sodium would have to act as the anode of the cell and we would keep up with the magnesium as the cathode of the cell.
Learn more about cathode:https://brainly.com/question/4052514
#SPJ1
If you react 9.8 grams of Zn, how many moles of H2 can you make?
Which sample of matter has the lowest average kinetic
energy?
O 50. g at -55°C and 2.0 atm
O 50. g at 273 K and 4.0 atm
O 50. g at 33°C and 3.0 atm
O 50. g at 367 K and 1.0 atm
The given sample of matter has the lowest average kinetic energy is 50g at -55°C and 2.0 atm option - A is correct answer.
What exactly is kinetic energy?The force an object experiences as a result of motion is known as kinetic energy. An object can only accelerate if a force is applied to it. We have to put in the effort to use force. Once the work is done, energy is transferred to the object, which then moves at a new, constant speed.
Kinetic energy, which can be seen in the motion of an object or subatomic particle, is the energy of motion.
The average kinetic energy is the subject of the query. Thus, the only connection is to temperature. Kinetic energy increases with increasing temperature and decreases with decreasing temperature.
To know more kinetic energy visit:
https://brainly.com/question/494520
#SPJ1
6.0 mol Al reacts with 4.0 mol O2 to
form Al2O3.
4AI + 302 → 2Al2O3
How many moles of Al2O3 form when
4.0 mol O2 reacts?
[?] mol Al2O3
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 2.66 mole of Al[tex]_2[/tex]O[tex]_3[/tex] form when 4.0 mol O[tex]_2[/tex] reacts.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.
4AI + 3O[tex]_2[/tex]→ 2Al[tex]_2[/tex]O[tex]_3[/tex]
moles of Al =6.0 mol
moles of O[tex]_2[/tex]=4.0 mol
Since oxygen is limiting reagent
moles of Al[tex]_2[/tex]O[tex]_3[/tex]=2/3×4.0
=2.66 mole
Therefore, 2.66 mole of Al[tex]_2[/tex]O[tex]_3[/tex] form when 4.0 mol O[tex]_2[/tex] reacts.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory
>120°
109.5°
120°
<120°
>109.5°
90°
< 109.5°
180°
Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory is 109.5°.
Germanium tetrachloride has an odd, acidic smell and is a colorless, fuming liquid. It is a necessary step in the creation of pure germanium metal. GeCl4 has seen a significant rise in utilization recently as a result of its employment as a reagent in the creation of fiber optics. GeO2 (germanium dioxide) may be immediately converted into germanium tetrachloride by dissolving the oxide in strong hydrochloric acid. To purify and remove the germanium tetrachloride from other products and contaminants, the resultant liquid is fractionally distilled. Rehydrolyzing the GeCl4 with deionized water will yield pure GeO2, which may then be reduced with hydrogen to get germanium metal.
complete question:Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory
109.5°
90°
120°
180°
< 109.5°
>109.5°
<120°
>120°
learn more about Germanium Refer:brainly.com/question/23745589
#SPJ4
Explain the similarities and differences between putting a beaker of ethanoic acid in the refrigerator and mixing it with sodium carbonate. Use these words: chemical,physical, reversible, irreversible.
When a beaker of ethanoic acid is placed in the refrigerator and mix it with sodium carbonate, its temperature drops down and endothermic reaction take place.
[tex]2CH_{3} COOH + NaCO_{3}[/tex] ⇒ [tex]CH_{3}COONa + NaHCO_{3}[/tex]
This chemical reaction is a reversible reaction.
Similarities:Ethanoic acid and sodium carbonate combine to form an endothermic reaction that results in fizzing as carbon dioxide is released and heat is lost to the environment, making the reaction vessel feel chilly to the touch.
Differences:The difference between adding sodium carbonate to the solution and refrigerating ethanoic acid is that no new substance is created in the former. When the substance is taken out of the refrigerator, it is still ethanoic acid. New chemicals are created in the latter scenario. Because of a chemical process, the material is no longer ethanoic acid.
Learn more about endothermic reaction visit:
brainly.com/question/23184814
#SPJ4
Thermal energy always moves from _ _ _ _ to _ _ _ energy.
Fill in the blanks.
Thermal energy always moves from higher energy area to lower energy area over a temperature gradient.
What is thermal energy?Thermal energy is a form of energy by virtue of temperature of a body. As the temperature of a body increase its thermal energy increases. Thermal energy or heat energy transfers though medium and vacuum from higher energy area to lower energy area.
Heat transfer can be through conduction in solids, convection in fluids and by radiation through space. In conduction, the thermal energy easily transfers through a chain of close packed molecules.
In all these mode of heat transfer heat energy is flowing from a hotter region to a colder region.
Find more on thermal energy:
https://brainly.com/question/18989562
#SPJ1
calculate the solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10
The solubility of AgCN in a solution containing 1.0M H Ksp of AgCN is 2.2e-12 Ka of HCN is 6.2e-10 is 5.9 x 10^-2M.
Given concentration of H+ (M) = 1.0M
Ksp of AgCN = 2.2e-12
Ka of HCN = 6.2e-10
AgCN ⇋ Ag+ +CN− ................Ksp
CN − + H+ ⇋ HCN................... 1/Ka
AgCN + H+ ⇋ HCN + Ag+ ...................Ksp/Ka = K0
K0 = 2.2e-12/6.2e-10 = 0.0035 = 35 x 10-4
At Equilibrium: AgCN + H+ ⇋ HCN + Ag+
Let the moles of [Ag+] = x
So the number of moles of [HCN] = x
K0 = [Ag+] [HCN] / [H+]
35 x 10-4 = x^2/1
x = 5.9 x 10^-2M
Hence the molar solubility of AgCN in buffer solution is 5.9 x 10^-2M.
To learn more about solubility click here https://brainly.com/question/28170449
#SPJ4
Rusting as a redox reaction in details
The reactant is iron (Fe) and the oxidizing agent is oxygen (O). This reaction results in the the formation of a compound known as iron oxide (Fe2O3), which is commonly referred to as rust. The reaction can be written as:
Fe + O2 --> Fe2O3
The oxidation process involves the loss of electrons from the Fe atoms, as oxygen gains electrons and is reduced. The electrons are transferred from the iron to the oxygen, resulting in the formation of iron oxide, which is an insoluble solid.
An oxidation-reduction reaction, or redox reaction, is a reaction in which there is a transfer of electrons between chemical species (the atoms, ions, or molecules involved in the reaction).
The reaction can be written as: [tex]\bold{Fe + O2 \Rightarrow Fe_2O_3}[/tex]
The reaction between NO(g) and O2(g) produces a single product. The reaction occurs in a rigid reaction vessel represented in the diagram above. Which of the following statements correctly predicts the change in average molecular velocity of the molecules as the reaction goes to completion at constant temperature and provides the correct explanation
The average molecular velocity of the molecules will decrease as the reaction goes to completion at a constant temperature.
What is Molecular velocity?
Molecular velocity is the average speed of molecules in a sample of matter. It is determined by the temperature of the sample, with higher temperatures resulting in higher molecular velocities.
This is because the reaction produces a single product, meaning that the number of molecules in the reaction vessel is decreasing as the reaction goes to completion. As the number of molecules decreases, the average molecular velocity of the molecules decreases as well.
To know more about molecular velocity,
https://brainly.com/question/17031383
#SPJ4
What does 14 mean in c14?
14 mean in C14 is C14 has atomic mass of 14.
The radioactive carbon isotope with the longest half-life, carbon-14, whose decay enables precise dating of archaeological artifacts. Six protons and eight neutrons make up the carbon-14 nucleus, giving it an atomic mass of 14. Additionally, the isotope is employed as a tracer to monitor specific carbon atoms as they undergo chemical or biological changes.
The 14 in C14 represents the number of neutrons and protons in the nucleus of that atom or we can called it atomic mass. Carbon-14: with 6 protons and 8 neutrons, and an atomic mass of 14,
Learn more about atomic mass at https://brainly.com/question/17067547
#SPJ4
A sealed, insulated calorimeter contains water at 310 K. The surrounding air temperature is 298 K, and the water inside the calorimeter remains at 310 K two hours later. What type of system does the calorimeter attempt to model
There is no heat exchange with the environment since the calorimeter is insulated. This may be demonstrated by saying: Since the calorimeter is a fixed unit, it follows that its heat capacity likewise has a fixed value.
Calorimeters are the tools used to measure the amount of heat. The definitions of heat and temperature, the quantity of heat absorbed to raise a body's temperature, the distinction between heat and temperature, and specific heat capacity are among the fundamental ideas presented in this chapter. A chemical reaction's associated thermal energy change is what causes a calorimeter's temperature to fluctuate. If the calorimeter absorbs heat (q calorimeter > 0) and its temperature rises, the reaction is producing heat (q rxn 0).
To learn more about capacity please click on below link
https://brainly.com/question/15158174
#SPJ4
Methanol (methyl alcohol or wood alcohol) is a potential automotive fuel, either in pure form or mixed with gasoline. Some fleet vehicles, such as municipal buses, have been modified to burn methanol-containing fuels. These fuels are also used by some race cars. A particular automobile modified to use a mixture of 85.0% methanol and 15.0% gasoline by mass gets 25.5 mi/gal. The fuel has a density of 0.775 g/mL. How many kilograms of methanol does the automobile consume in a trip of 808 km
Answer:
it’s 4
Explanation:
How many ATP's is produced in the glycolysis of 2 glucose molecules?
Answer: 4 ATP molecules is produced in the glycolysis of 2 glucose molecules
How is ATP produced?The first stage of most carbohydrate catabolism, which is described as the breakdown of larger molecules into smaller ones, is glycolysis, which is a part of cellular respiration. Two Greek words that mean "to break down anything sweet" are the source of the word glycolysis. Two molecules of ATP are created during the breakdown of glucose and formation of pyruvate during glycolysis.
Explanation:
2 ATP are produced.
For every glucose molecule, meaning that for every 2 glucose molecules, 4 ATP will be created.
For more information on ATP visit: https://brainly.com/question/174043
#SPJ4