What is the molar mass for fluoxetine
(C16H16F3NO), also known as Prozac®?
1. 281.3 g/mol
2.295.3 g/mol
3. 297.1 g/mol
4.279.3 g/mol

After allowing time for photosynthesis the ¹⁸O-radiolabeled will be found in the plants in the form of C₆H₁₂O₆.

A researcher grew a plant in an illuminated chamber with ¹⁸O-radiolabeled CO₂. After allowing the time for photosynthesis, the ¹⁸O-radiolabeled will be found in C₆H₁₂O₆ in the plant.

Photosynthesis is a process in which plants produces their food by using sunlight, carbon dioxide and water to produce their food with the help of the a green colored pigment called chlorophyll.

It does not matter which isotope of oxygen we are using for photosynthesis, the amount of the food produced will be more or less same in case of every isotope.

The oxygen isotope will get mixed in the soil of the plants and after the whole photosynthesis process is done. the oxygen is constituted in the plant as C₆H₁₂O₆ will would be further broken down into the form of o₂ and H₂O. These H₂O and O₂ will be released in the atmosphere as a final product of the complete photosynthesis.

To know more about Photosynthesis, visit,

https://brainly.com/question/26568636

#SPJ9

The average atomic mass of your cadmium element is the mass and random errors in the measurement of mass and differences that arise from the nature of samples used for the experiment

The average atomic mass is the mass of the element that is obtained when you  consider the masses of all the isotopes that are found in the element as well as the percentage abundance of each of the isotopes and the isotope percentages in each of the samples would not be the same and this means that the results that each group would obtain would slightly differ from each other

Know more about average atomic mass

https://brainly.com/question/28831519

#SPJ1

Answer: Ionic Bond

Explanation: They form when the cation and the anion have opposite charges, and attract each other

The density of a block of steel is:

8.05g/mL.

The mass of a substance per unit of volume is that the definition of density. though the sign may represent the Latin letter D, it's most often accustomed represent density. Mass divided by volume is however density is mathematically outlined.

The units of mass divided by volume accustomed live density embody grammes per cm cube (g/cm3) and kilogrammes per liter .

The equation for density is d = M/V, wherever d represents density, M is mass, and V is volume.

As a result, so as to calculate density, we tend to should divide mass by volume.

The mass is one hundred 20.75 and therefore the volume is 15.0 ml.

Divided by 120.75/15.0

8.05g/mL is the density.

To know more about density click at

https://brainly.com/question/7244058

P is the symbol for the element phosphorous. It has an atomic mass of 30.974 and an atomic number of 15.

The chemical element phosphorus has the atomic number 15 and the letter P in its name. Phosphorus (P), a nonmetallic chemical element of the nitrogen family (Group 15 [Va] of the periodic table), is a colorless, semitransparent, soft, waxy solid that glows in the dark. It appears to exist in two main forms: white phosphorus and red phosphorus. However, due to its high reactivity, phosphorus is never found on Earth as a free element. Phosphorus is a nonmetallic allotrope element found in living things and phosphates. The red form of phosphorus is less reactive and harmless and is used in alloys, matches, and insecticides. Ordinary phosphorus is a poisonous, combustible, and phosphorescent white solid.

To know more about phosphorus, visit:

https://brainly.com/question/13173173

#SPJ9

The following organic molecules are isomers CH3CH₂CH₂CH3. Option A.

All organic compounds have isomers. Isomers mean that they have the same molecular formula but different configurations. The connectivity of a connection ultimately determines its functionality. For example, the same molecular formula can be used to identify alcohols or ethers.

Isomers are molecules that have the same molecular formula but differ in the arrangement of their atoms in space. This excludes all other configurations by rotating the molecule as a whole or around specific bonds. In organic chemistry, isomers are molecules that have the same molecular formula but differ in the structural or spatial arrangement of the atoms within the molecule.

Learn more about Organic molecules here:-https://brainly.com/question/26556885

#SPJ1

Answer:

No, it cannot be accelerating.

Explanation:

The question explicitly states that the airplane is flying at a constant speed, meaning that its speed is not changing (not accelerating or decelerating).

Oxford Languages definition of constant:

a quantity or parameter that does not change its value whatever the value of the variables, under a given set of conditions.

Answer:

No, as acceleration means increasing speed but the airplane is flying with a constant speed which means there is no increase or decrease in speed

Pls mark as Brainliest

All nine of the necessary amino acids that humans need are present in milk proteins.

Although the mammary gland produces the proteins in milk, 60% of the amino acids needed to make those proteins come from the cow's diet. So the milk from cows may also provide us with protein.

The dairy cow needs proteins for a variety of metabolic processes, including growth, lactation, and reproduction. The dairy cow needs proteins for a variety of metabolic processes, including growth, lactation, and reproduction. Crude protein is a popular term used to describe the protein content in feed (CP).

All elements of bodily health, reproduction, and most critically milk production in the dairy business depend on protein. The protein that the cow consumes may be divided into two types: rumen degradable protein (RDP) and rumen undegradable protein (RUP).

Learn more about milk proteins refer

https://brainly.com/question/1045900
#SPJ13

Chemical decomposition, also known as chemical breakdown, refers to the process or effect of breaking down a single chemical entity (normal molecule, reaction intermediate, etc.) into two or more fragments. The chemical breakdown is commonly thought of and characterized as the inverse of chemical synthesis.

The mechanics of a decomposition process are not usually fully defined, although some of the processes are understood; breaking bonds requires a lot of energy. Because all decomposition processes break down the bonds that keep it together in order to produce simpler basic parts, the reactions would all require some form of this energy to varying degrees. As a result of this fundamental rule.

To learn more about decomposition reaction the given link:

brainly.com/question/8009068

#SPJ9

The largest change in freezing point will be achieved when the solvent is  tert-butanol, and Kf = 9.1.

What is freezing point?

The temperature at which a liquid turns into a solid is known as the freezing point. Similar to the melting point, the freezing point typically rises with increasing pressure. In the case of combinations and for some organic substances, such as lipids, the freezing point is lower than the melting point.

Concept of colligative property is applied here.

In this case, particularly freezing point depression.

The formula is for this is:

[tex]\delta T = K_f \times m \times i[/tex]

When we add particles of a certain solute, freezing point of a solution becomes lower than the pure solvent.

i = Van't Hoff factor (ions particles that are dissolved in the solution)

In this case, the solute is nonvolatile, so i values 1.

δT = Difference between  fusion T° of pure solvent - fusion T° of solution.

T° fusion paradichlorobenzene = 56 °C

T° fusion water = 0°

T° fusion tert-butanol = 25°

Water has the lowest fusion temperature and the paradichlorobenzene has the highest Kf. But the the tert-butanol, has the highest Kf so this solvent will have the largest change in freezing point, when all the concentrations are the same.

To know more about freezing point, go to link

https://brainly.com/question/28032179

#SPJ9

While heterogeneous matter (from the Greek hetero = different) suggests non-uniformity and discontinuity, homogeneous matter (from the Greek homo = same) can be thought of as being uniform and continuous.

Materials that are homogeneous lack borders, are uniform throughout, and have all of its component elements in the same state. Homogeneous mixtures also include air we and the water we drink from the faucet. Quality is related are also alluded to as solutions.

Whether a mixture is solid, liquid, or gaseous, homogeneous mixtures have the same ratios of their component parts throughout a particular sample. Its composition remains the same throughout. There is just one visible phase of substance in a homogeneous combination.

To know more about Homogeneous Matter visit:

https://brainly.com/question/772299

#SPJ10

Answer:

producer and consumer

since the The caterpillar will later evolve and develop into a cocoon.

The cocoon will evolve into a butterfly and hence the organism will grow and develop.

Being a herbivorous animal the caterpillar represents consumer and plant is a producer.

The caterpillar also helps in rearing silk hence they are producers and consumers also

The pressure (in atm) of the carbon (IV) oxide, CO₂ gas collected, during the given experiment is 0.965 atm

We'll beging by obtaining the pressure (in torr) of the carbon (IV) oxide, CO₂ gas collected. This can be obtained as follow:

Pressure of CO₂ = (Pressure of lab) - (Vapour pressure of water at 21 ° C)

Pressure of CO₂ = 752 - 18.65

Pressure of CO₂ = 733.35 torr

Finally, we shall convert 733.35 torr to atm as illustrated below

We know that:

760 torr is equivalent to 1 atm

Therefore,

733.35 torr will be equivalent = (733.35 torr × 1 atm) / 760 torr

733.35 torr = 0.965 atm

Thus, from the above calculations, we can conclude that the pressure (in atm) is 0.965 atm

Learn more about conversion:

https://brainly.com/question/3161490

#SPJ1

1. Atomic number is the relative atomic in an atom.

2. Mass number is the number of protons and neutrons in an atom

3. Isotopes are atoms with the atomic same but different mass due to the neutrons number of neutrons in the nucleus.

Atoms of many elements are in the form of molecules or ions because they are the most reactive. Examples are hydrogen oxygen chlorine and other elements. However non-reactive atoms of certain elements exist in nature in a free state. The relative atomic mass of an element is defined as the weight in grams of the number of atoms of that element in 12.00 grams of carbon-12.

The atomic mass of an element is the average mass of the atoms of the element measured in atomic mass units AMU, also known as Dalton D. Atomic mass is the weighted average of all isotopes of that element, the mass of each isotope multiplied by the abundance of that particular isotope. It is the ratio of the average atomic mass of the element from a single specific sample or source to the mass of the carbon-12 atom.

Learn more about The atomic mass here:-https://brainly.com/question/338808

#SPJ1

The Fischer Esterification method is used to accomplish this preparation of isopentyl acetate.

The Fischer esterification is an alternative esterification mechanism that uses an equilibrium process. It is standard procedure to use an excess of one of the reactants, often alcohol or acid, to alter the equilibrium in a way that facilitates the synthesis of esters. Since acetic acid is less costly and more readily removed than alcohol, we will use a lot of it in the current procedure.

Another strategy to trigger a reaction to its products is to remove one of the products as it forms. In this experiment, we will completely remove the water produced in the reaction by directly adding silica beads to the reaction vessel and using a drying tube with a drying agent (calcium chloride), which forbids the entrance of moisture into the reaction.

Learn to know more about Fischer esterification on

https://brainly.com/question/24262393

#SPJ9

Radiation produced in the given reaction is beta and gamma.

Radiation is defined as a source of energy or particles that pass through the atmosphere or other media. Radiation includes microwaves and radio waves utilized for wireless communication as well as light and heat. The term "radiation" refers to energetic particles and electromagnetic waves that some materials emit.

A stream of extremely energetic electromagnetic radiation known as gamma rays or gamma radiation is released by an atomic nucleus that is going through radioactive decay.

Beta Radiation Free electrons or positrons moving at relativistic speeds make up beta radiation. The term "beta particles" refers to these entities. Beta particles are high-energy, high-speed electrons or positrons released by some fission fragments or by some primitive radioactive nuclei, such as potassium-40.

Learn more about radiation here:-

https://brainly.com/question/16645044

#SPJ4

Answer:

a)3

b)6

d)24

option c

Using particles that are intended to adhere to specific cells, injured cells can be treated directly. Early disease detection is made possible by this technique, which also causes less damage to the body's healthy cells.

What medical use do nanoparticles have?

Medicine can now be included in nanoparticles the size of viruses thanks to modern research. Because they can locate damaged cells with extreme precision and administer the medication there, nanoparticles are effective for drug delivery—the administration of the medication to the body.

In the body, nanoparticles are active The epidermis, lining of the lungs, or lining of the intestine are some of the exterior layers of the body through which nanoparticles can enter. The specific physical and chemical characteristics of the particle will determine how successfully they migrate from the outside to the inside

to learn more about nanoparticles refer to:

https://brainly.com/question/28817822

#SPJ13

Whenever ionic chemicals are melted or dissolved in water, an electric current is produced. The B ions migrate toward the positive electrode in an ionic solution, while the A+ ions migrate toward the negative electrode.

Always dissociated, which means they are made up of independent cations (+) and anions, which are ionic compounds or salts (-). For instance, even in the solid state, there are just Na+ and Cl- ions in common salt, NaCl, and nothing that is "NaCl."

But the ions need to travel in order to conduct electricity. In the solid state, it is impossible to do this. Therefore, dry solid salts with no moisture at all are poor electrical conductors. The ions may travel, thus when they are in liquid form (melted) or solution (dissolved in water), they conduct electricity.

In other words, they conduct electricity because they are dissociated, not because electrical current is flowing through them.

Learn more about electric current at:

https://brainly.com/question/27003377

Answer:

you wont ever get this one but ok

Explanation:

lol

Answer:

C

Explanation:

When Beta decay happens, the atomic number of an element goes up, and that means there is an extra proton. A is not the answer because unstable atoms cause decay. B is also not correct because this is what happens in Beta decay: a neutron becomes a proton. D is not correct because an electron is actually emitted from the nucleus.

Answer:

The correct answer is B. An atom has many fewer protons than neutrons.

I just took the test.

Explanation:

The temperature at which a liquid's vapour pressure equals the pressure around it and the liquid transforms into a vapour is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.

A liquid partially vaporises into the space above it at any temperature up until the vapour pressure of the liquid at that temperature, which is a characteristic value. When a liquid reaches its boiling point, vapour bubbles form inside the liquid and rise to the surface as the temperature rises, increasing the vapour pressure.

Learn more about a boiling point, Visit;

https://brainly.com/question/14771622

#SPJ13

We can see that the density of the water is less than the density of the saturated salt solution from the table shown above.

The term density is defined as the ratio of the mass to the volume of an object. In this case, we can see that we are trying to compare the density of water and the density of a salt solution. We have to recall that when we dissolve a solute in a solvent, the density of the solution would change to reflect that we no longer have a pure solvent.

This is because, the density of a substance is an intrinsic property thus it then depends on the nature of the substance and not on the amount of the substance.

Thus, we can see that when we dissolve the salt in the water, the density of the water is increased. Thus water has a density of 1 g/mL while a saturated salt solution has a density of 1.12 g/mL.

Learn more about density:https://brainly.com/question/15164682

#SPJ1

The atomic theory describes Dalton's theory because electron, proton and neutron.

The first a part of his theory states that every one matter is product of atoms, which might be indivisible. The second one part of the concept says all atoms of a given element are equal in mass and houses. The  element says compounds are combos of two or extra distinctive forms of atoms.

One of the maximum essential merits of Dalton's atomic idea is the truth that the idea does no longer violate numerous fundamental laws of chemical combination consisting of the regulation of precise proportions, the regulation of multiple proportions, and the regulation of conservation of mass.

In 1803 Dalton located that oxygen mixed with both one or  volumes of nitric oxide in closed vessels over water and this pioneering remark of fundamental more than one proportions supplied vital experimental proof for his incipient atomic thoughts.

Learn more about Dalton's theory here:- https://brainly.com/question/13157325

#SPJ1

Identify each ingredient and output of this reaction as an acid or a basic. Right now, you're in a labeling module. switch off the quick navigation or explore mode, tab to the details, press space or enter to pick up, tab to move, and press space or enter to drop.

ch₃oh o − ↽ − − ⇀ ch₃o − h₂o answer bank.

A chemical reaction between an acid and a base is known as an acid-base response. It can be applied to calculate pH. These are known as the acid-base propositions, such as the Brnsted-Lowry acid-base statement, and they are essential generalizations of the response mechanisms and how they function when solving related problems.

Their importance is revealed when testing acid-base reactions for gaseous or liquid species, or when the acid or basic property may be less obvious. Antoine Lavoisier, a French pharmacist, gave the first of these generalizations somewhere around 1776.

It's important to suppose of the acid- base response models as propositions that round each other. For illustration, the current Lewis model has the broadest description of what an acid and base are, with the Brønsted- Lowry proposition being a subset of what acids and bases are, and the Arrhenius proposition being the most restrictive.

To learn more about acid and base click on given link below

https://brainly.com/question/9836972

#SPJ9

Organisms in over-populated areas do not survive well due to reduction in available food and shelter.

An unsustainable population within a specific area or habitat is referred to as overpopulation. A higher birth rate, a lower death rate, migration to an area of the ecosphere where there are fewer predators, or a rapid fall in the amount of resources available are all causes of overpopulation. Overpopulation thus refers to a situation when a population in a particular ecosystem depletes the resources necessary for subsistence or survival.

Overpopulation typically causes ecological disruption due to resource depletion. Other populations who compete for the same resources may experience a decline as a result of this disruption.

To know more about overpopulation, refer to the following link:

https://brainly.com/question/13735840

#SPJ9

Answer:

Explanation:

The grass hopper feeds on the plants so the secondary consumer lacking its food source would decrease as the producer increases with not predator.

Answer:

5. F

6. H

7. E

8. B

9. G

10. D

Explanation:

Most of these could have just been looked up online or could've used context clues based on the name. If they are vocab words make sure to memorize them.

Density = Mass/Volume

Density (of the unknown metal) = 180/20

Answer: 9 grams/mL

During chemiosmosis, hydrogen ions accumulate in the ATP  formation of the mitochondrion to create a large electrochemical gradient for aerobic cellular respiration.

To learn more about : aerobic respiration

Ref : https://brainly.com/question/11691469

#jsp2