What is the mass of the oxygen in one mole of calcium phosphate

Answer:

coke and mentos are basically just a small scale replica

Explanation:

Answer:

52.8 g of O2.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

4Al + 3O2 —> 2Al2O3

From the balanced equation above,

4 moles of Al reacted with 3 moles of O2 to produce 2 moles of Al2O3

Next, we shall determine the number of mole of O2 needed to react with 2.2 moles of Al. This can be obtained as follow:

From the balanced equation above,

4 moles of Al reacted with 3 moles of O2.

Therefore, 2.2 moles of Al will react with = (2.2 × 3)/4 = 1.65 moles of O2.

Thus, 1.65 moles of O2 is needed for the reaction.

Finally, we shall determine the mass of O2 needed as shown below:

Mole of O2 = 1.65 moles

Molar mass of O2 = 2 × 16= 32 g/mol

Mass of O2 =?

Mole = mass/Molar mass

1.65 = mass of O2 /32

Cross multiply

Mass of O2 = 1.65 × 32

Mass of O2 = 52.8 g

Therefore, 52.8 g of O2 is needed for the reaction.

Go to the Data tab > Sort & Filter group, and click Clear.

Go to the Home tab > Editing group, and click Sort & Filter > Clear.

Answer:

There are three atoms in the equation

Answer:

B. gas mixed with a liquid

Explanation:

because:

A. a solid can't dissolve in a liquid.

C. two liquids mixed isn't a solution

D. Not All of the above for sure.

Examples of solutions can be all of the above. The correct option is D.

A solution is made when a solute is mixed with a solvent. The solution can be a liquid, solid, or gas. The solution is made when the solute is fully mixed with the solvent. The solute is the substance that gets mixed, and the solvent is the base in which the solute gets dissolved.

So, a solid dissolved in a liquid, gas mixed with a liquid, or a liquid mixed with a liquid, the energy statement is true for a solution.

Examples of a solution are sugar dissolved in water when water mix with soda and state gets mixed with water or another gas.

Thus, the correct options are D. all of the the above.

Learn more about the solution, here:

https://brainly.com/question/1416865

#SPJ2

Answer:

See explanation

Explanation:

At the same temperature, the average kinetic energy of gases depends on the molecular mass of the gas. Hence,  given a particular temperature, lighter molecules travel faster on the average than heavier molecules.

Considering ethanol and octane, The molar mass of ethanol is 46.07 g/mol while the molar mass of octane is 114.23 g/mol. Hence, ethanol has a greater average kinetic energy than octane at the same temperature.

Answer:

Measure at the top of the meniscus

Hold the container (it is unsteady)

Explanation:

I'm really, really, sorry. I took chemistry in 6th grade and I'm in 8th, and I don't remember the entire list. This is all I could think of.

Answer:

174.6g of solution contains the 11.0g of sucrose

Explanation:

A solution of 6.3% by mass of sucrose contains 6.3g of sucrose in 100g of solution, that is, 6.3g of sucrose / 100g of solution.

As we want to find the mass contains 11.0g of sucrose, we can write:

11.0g of sucrose * (100g of solution / 6.3g of solution) =

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 2 × 20

We have the final answer as

Hope this helps you

Answer: 40N

Explanation:  

Force = mass × acceleration

20 x 2 = force

20 x 2 is 40

Answer 40 N

NOT 40J

Answer:

C                  

Explanation:

Answer:

-1.35 degree

Explanation:

Given the specific rotation of (S)-2-butanol = +13.5 degree

So, the specific rotation of its enantiomer (R)-2-butanol = -13.5 degree

Now the optical rotation of a pure liquid is given by

[tex]$\theta = [\alpha]_\lambda ^t.l.d$[/tex]

Here, [tex]$\theta$[/tex]  = the optical rotation

         [tex]$[\alpha]_\lambda^t$[/tex] = specific rotation at temperature 't' and wave length 'λ'

                = -13.5 degree

         l = optical path length

           = 1 dm

          d  = density

             = 1/10

Therefore,

[tex]$\theta = -13.5 \times 1 \times \frac{1}{10}$[/tex]

    = -1.35 degree

Answer:

20000

Explanation:

Answer: for me everything ig

Explanation:

Answer:

The correct answer is 2.1

Explanation:

The neutralization reaction involved in the titration is between a strong acid (HCl) and a strong base (NaOH), as follows:

HCl + NaOH → NaCl + H₂O

According to this, 1 equivalent of HCl reacts with 1 equivalent of NaOH. The equivalence point is the point at which the amount of NaOH added reacted completely with the amount of HCl.

moles of acid = moles of base

moles HCl = moles NaOH

Ca x Va = Cb x Vb

Ca = (Cb x Vb)/Va = (0.16 M x 17 mL)/(350 mL) = 7.8 x 10⁻³ M

Since HCl is a strong acid, we calculate the pH of the solution directly from the concentration of acid:

[H⁺]= Ca = 7.8 x 10⁻³ M

pH = -log [H⁺] = -log (7.8 x 10⁻³ M) = 2.11

Therefore, the pH of the HCl solution is 2.1

Answer:

B

Explanation:

bshdiidididjdjjdididid

Answer:

The mechanism is E1 and the product is cyclohexene

Explanation:

Attached to this answer is an image of the reaction mechanism of the reaction between cyclohexanol and concentrated sulfuric acid/phosphoric acid. The acid (H3O^+) acts as catalyst.

We can see that the first step in the mechanism is the protonation of the -OH group of the alcohol. This is followed by loss of water molecule which is a good leaving group.

The water now acts as a Lewis base by abstracting a proton from the substrate, forming cyclohexene and regenerating the acid catalyst.

Answer:

I agree

Explanation:

because the sunlight passes through the atmosphere and is absorbed by earth's surface.

The green house gases in the atmosphere can change the behavior of energy on earth. Thus i agree with this statement.

The green house effect is defined as a process by which the radiations from the sun are absorbed by the green house gases like methane, Chloro fluoro carbons and not reflected back into the space. This makes the surface as insulator and prevents it from freezing.

Due to the increased level of green house gases, the temperature of the earth increases considerably and thereby causes global warming, depletion of ozone layer, smog and air pollution, etc.

It is the natural green house effect which affect the behaviour of heat energy radiated by the sun. The green house gases never let the radiations escape from the earth and increase the surface temperature of earth. This leads to global warming.

Thus green house gases affects the solar energy.

To know more about Global warming, visit;

https://brainly.com/question/21476905

#SPJ6

Answer:

A. Chemical Energy --> Thermal Energy

D. Chemical Energy --> Electromagnetic Energy

Explanation:

I took the quiz!

Answer:

Natural science can be divided into two main branches

Explanation:

life science and physical science. Life science is alternatively known as biology, and physical science is subdivided into branches: physics, chemistry, astronomy and Earth science.

Answer:

Astronomy  

Biology

Geology

Chemistry

Please Mark Brainliest and rate me 5

Thank You Good Night / Good Day  to you

Answer:

[tex]T_b=239.7K=-33.49\°C[/tex]

Explanation:

Hello!

In this case, since the relationship between entropy and enthalpy for any process is defined below:

[tex]S=\frac{H}{T}[/tex]

For the vaporization of ammonia or any liquid, we can write:

[tex]\Delta S_{vap}=\frac{\Delta H_{vap}}{T_{vap}}[/tex]

In such a way, solving the temperature of vaporization, or boiling point, we have:

[tex]T_{vap}=\frac{\Delta H_{vap}}{\Delta S_{vap}}[/tex]

Plugging in the given enthalpy and entropy of vaporization we obtain:

[tex]T_{vap}=T_b=\frac{23350\frac{J}{mol} }{97.43\frac{J}{mol*K}} \\\\T_b=239.7K=-33.49\°C[/tex]

Best regards!

From the information provided in the question, the boiling point of ammonia is 240 K.

Entropy is the degree of disorderliness in a system. The entropy of a system can be obtained using the relation;

ΔS°vap = ΔH°vap /T

Now;

ΔH°vap = 23.35 kJ/mol

ΔS°vap = 97.43 J/mol·K

T = ?

Making T the subject of the formula and substituting values;

T = ΔH°vap /ΔS°vap

T = 23.35 × 10^3J/mol/97.43 J/mol·K

T = 240 K

Learn more: https://brainly.com/question/11155928

Answer:

12.0 g/mL

Explanation:

From the question given above, the following data were obtained:

Mass of Rock = 360 g

Volume of water = 150 mL

Volume of water + Rock = 180 mL

Density of Rock =?

Next, we shall determine the volume of the rock. This can be obtained as follow:

Volume of water = 150 mL

Volume of water + Rock = 180 mL

Volume of Rock =?

Volume of Rock = (Volume of water + Rock) – (Volume of water)

Volume of Rock = 180 – 150

Volume of Rock = 30 mL

Finally, we shall determine the density of the rock as illustrated below:

Mass of Rock = 360 g

Volume of Rock = 30 mL

Density of Rock =?

Density = mass /volume

Density of Rock = 360 / 30

Density of Rock = 12.0 g/mL

Thus, the density of the rock is 12.0 g/mL

Answer:

Its D

Explanation:

I took the quiz

Answer:

D

Explanation:

IT IS REACTING

Answer: #2 : s, solid & #3 : PbBr2

Explanation:

In the reaction [tex]\rm Li_2CO_3 (aq) + BaS (aq)\rightarrow LiOH (aq) + BaCo_3 (?)[/tex] the missing symbol is s . The PbBr₂ will produce a precipitate when mixed water. Hence option D is correct.

Chemical reaction is defined as a procedure that involves changing a substance's molecular or ionic structure, as opposed to changing its physical shape or undergoing a nuclear reaction. When atoms establish or break chemical bonds, chemical reaction take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.

Precipitation is defined as the mechanism by which water vapor in the atmosphere condenses and descends to the ground under the pull of gravity. Water vapor in the clouds condenses into increasing-sized droplets of water, forming precipitation. To replenish the water on the earth, precipitation is required. This world would be a vast desert if it didn't rain. Within an estuary, water level and water quality are impacted by the frequency and length of precipitation events.

Thus, in the reaction [tex]\rm Li_2CO_3 (aq) + BaS (aq)\rightarrow LiOH (aq) + BaCo_3 (?)[/tex] the missing symbol is s . The PbBr₂ will produce a precipitate when mixed water. Hence option D is correct.

To learn more about chemical reaction, refer to the link below:

https://brainly.com/question/3461108

#SPJ6

Answer:

Carbon dioxide

Explanation:

Humans are animals and we exhale carbon dioxide

Answer: D

Explanation:

On edge

Answer:

D

Explanation:

just did it on Ed

Answer:

I think it's c but I'm not sure

Answer: C

Explanation:

Answer:

Entropy.

Explanation:

I really hope this is right! sorry if its wrong

When a sample of liquid is heated, its thermal energy: increases.

Thermal energy can be defined as the energy possessed by an object due to the movement of its particles.

Basically, the temperature of an object or system is highly dependent on thermal energy.

Hence, temperature is directly proportional to thermal energy.

Additionally, as the temperature of an object increases due to the application of heat, the thermal energy of the object increases.

In conclusion, thermal energy increases when a sample of liquid is heated.

Read more: https://brainly.com/question/22077574

Answer:

E = 3.6×10⁻¹⁹ J

Explanation:

Given data:

Wavelength = 550 nm  (550 ×10⁻⁹ nm)

Energy of wave = ?

Solution:

Formula:

E = h c/λ

c = 3×10⁸ m/s

h = 6.63×10⁻³⁴ Js

Now we will put the values in formula.

E = 6.63×10⁻³⁴ Js × 3×10⁸ m/s /550 ×10⁻⁹ nm

E = 19.89×10⁻²⁶ J.m /550 ×10⁻⁹ nm

E = 0.036×10⁻¹⁷ J

E = 3.6×10⁻¹⁹ J

Answer:  The atomic number of oxygen is "O" .

Explanation:

Because Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as well as with other compounds.

Answer:

E = 165.75×10⁻²⁶ J

Explanation:

Given data:

Wavelength = 0.12 m

Energy of wave = ?

Solution:

Formula:

E = h c/λ

c = 3×10⁸ m/s

h = 6.63×10⁻³⁴ Js

Now we will put the values in formula.

E = 6.63×10⁻³⁴ Js × 3×10⁸ m/s / 0.12 m

E = 19.89×10⁻²⁶ J.m / 0.12 m

E = 165.75×10⁻²⁶ J