What is the mass of 5.32 x 10^25 atoms of sodium?​

The first student was knowledgeable about thermodynamics, he would most likely to do the experiment with more accuracy so that there is no error while performing the calorimetry experiment.

Thermodynamics is defined as a field of physics concerned with heat, work, and temperature and its relationships to energy, radiation, and the physical characteristics of matter.

There are basically three system of thermodynamic.

Calorimeter is defined as a device for measuring heat generated during a mechanical, electrical, or chemical reaction and estimating material heat capacity.

Thus, the first student was knowledgeable about thermodynamics, he would most likely to do the experiment with more accuracy so that there is no error while performing the calorimetry experiment.

To learn more about thermodynamics, refer to the link below:

https://brainly.com/question/1604031

#SPJ1

The reason why the  average atomic mass may not match that of any other group are;

1) Random errors in the measurement of mass

2) Differences that arise from the nature of samples used for the experiment.

The average atomic mass is the mass of the element that is obtained when you  consider the masses of all the isotopes that are found in the element as well as the percentage abundance of each of the isotopes.

Let us know that no two samples of the scandium element  would be exactly the same. The isotope percentages in each of the samples would not be the same. This means that the results that each group would obtain would slightly differ from each other.

Learn more about atomic mass:https://brainly.com/question/17067547

#SPJ1

( a ) The pH of 4.8 × [tex]10^{-2}[/tex]  M solution is  1.3 ..

( b ) The pH of 4.71 pOH solution is 9.29

( c ) The pH of 9.61 × [tex]10^{-3}[/tex] M hydroxide ion solution is 11.98.

( d ) The pH of 1.37 × [tex]10^{-8}[/tex]   M solution is 8.17

( a )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

pH = - ㏒ [ 4.8 × [tex]10^{-2}[/tex]  M ]

pH = 1.3

Therefore , the pH of 4.8 × [tex]10^{-2}[/tex]  M solution is  1.3 .

( b )

The pOH = - ㏒ [  [tex]OH^{-}[/tex] ]    

Given pOH =  4.71

So put the value of  pOH .

pH + pOH = 14

pH  =  = 14 - pOH  =  14 -  4.71 = 9.29

Therefore , the pH of 4.71 pOH solution is 9.29 .

( c )

The pOH = - ㏒ [  [tex]OH^{-}[/tex] ]

Given concentration of hydroxide ion =  9.61 × [tex]10^{-3}[/tex] M

So put the value of  concentration of hydroxide ion in equation 1

pOH = - ㏒9.61 × [tex]10^{-3}[/tex] M

pOH = 2.01

pH + pOH = 14

pH  =  = 14 - pOH  =  14 - 2.01 = 11.98

Therefore , the pH of  9.61 × [tex]10^{-3}[/tex] M hydroxide ion solution is 11.98.

( d )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

pH = - ㏒ [ 1.37 × [tex]10^{-8}[/tex] M ]

pH = 8.17

Therefore , the pH of 1.37 × [tex]10^{-8}[/tex]   M solution is 8.17

to learn more about solutions here ,

https://brainly.com/question/7932885

#SPJ1

Answer:

Non-metals are brittle. ...

Non-metals are bad conductors of heat and electricity (except graphite).

Non-metals are non-lustrous (dull) and cannot be polished (except iodine).

Non-metals may be solids, liquids or gases at room temperature.

Non-metals are neither tough nor strong.

Thing in common of non- metals are :

The elements that absorb or gain electrons to get negative ions square measure referred to as non-metals. In their outmost shell, non-metals typically have four, 5, half dozen or seven electrons.

High inclination and high ionisation energies square measure characteristics of non-metals.

Because of these characteristics, non-metals ofttimes gain electrons after they move with different substances to make valence bonds.

Non-metals often have smaller atoms than do metals. The atomic sizes of non-metals determine a number of their other characteristics.

A high electronegativities are seen in non-metals. This indicates that non-metal atoms exhibit a significant propensity to attract more electrons than they would ordinarily have.

A high electronegativities are seen in non-metals. This indicates that non-metal atoms have a strong propensity to retain their existing electrons.

As opposed to non-metals, which can give up one or more electrons to metals relatively easily, metals can easily form positively charged ions and conduct electricity.

Very little electrical conductivity is displayed by non-metals.

To know more about non-metals click at

https://brainly.com/question/25465587

1. mercury - metal, liquid at temperature

2. oxygen - does not have a definite volume

3.Bromine - non-metal, liquid at room temperature

4.mercuric oxide - compound

5. silver -malleable and ductile

6. chemical change - decomposition of compound

The only common metal that is liquid at room temperature is mercury, a chemical element. It is a thick, silvery-white liquid metal that is frequently referred to as quicksilver. Mercury is a metal in transition.

Since mercury is a chemical element, it cannot be made or destroyed. Since the creation of the earth, the same quantity has been present on the planet. However, both natural and human activity can cycle mercury in the environment. Additionally, there have been numerous new uses for mercury metal in electrochemistry and electrical equipment. Mercury metal has a significant vapour pressure at normal temperature and is a volatile liquid.

At 20°C, mercury has a density of 13.6 g.cm-3.

Mercury is a metallic element that is liquid and has a wide range of uses. Additionally, it has dangerous qualities.

Learn more about mercury here:

brainly.com/question/585198

#SPJ13

Explanation:

As the halogens become less reactive down the group, their oxidising ability decreases. Remember that oxidation is a gain of electrons. Halogens become less oxidising as you move down the group as it is more difficult to gain an electron.

Whenever you are trying to find the volume of something you have to multiply length by width and by height

mass of glucose (in grams) can the plant synthesize from the co 2 is 25.8g

molar mass of [tex]CO_{2}[/tex]= 44.01 g/mol

molar mass of [tex]C_{6} H_{12} O_{6}[/tex] =180.18g/mol

[tex](g)CO_{2}-- > (mol)CO_{2} --- > (mol)C_{6} H_{12} O_{6}-- > (g)C_{6} H_{12} O_{6}[/tex]m

       [tex]\frac{1 mol CO_{2} }{44.01 g CO_{2}}[/tex]                     [tex]\frac{1 mol C_{6} H_{12} O_{6} }{ 6 mol CO_{2}}[/tex]                  [tex]\frac{180.18 g C_{6} H_{12} O_{6} }{ 1 mol C_{6} H_{12} O_{6} }[/tex]

37.8g x       [tex]\frac{1 mol CO_{2} }{44.01 g CO_{2}}[/tex]      x         [tex]\frac{1 mol C_{6} H_{12} O_{6} }{ 6 mol CO_{2}}[/tex]    x   [tex]\frac{180.18 g C_{6} H_{12} O_{6} }{ 1 mol C_{6} H_{12} O_{6} }[/tex]

= 25.8g  [tex]C_{6} H_{12} O_{6}[/tex]

mass of glucose (in grams) can the plant synthesize from the co 2 is 25.8g.

It is a monosaccharide because it is the most basic type of carbohydrate. It has one sugar, thus this indicates. It's not by itself. Galactose, ribose, and fructose are examples of additional monosaccharides. One of the body's preferred sources of fuel in the form of carbs is glucose, along with fat.

Learn more about Glucose here:-

https://brainly.com/question/4299703

#SPJ4

Heat causes a liquid's particles to gain more energy, which causes them to move more quickly and expand the liquid.

The heat energy used to boil the water is transmitted to the water molecules, which cause them to start moving more swiftly. The energy of the molecules eventually becomes too great for them to remain bound together as a liquid. This causes them to condense into gaseous water vapor molecules, which rise to the surface as bubbles as well as move through the air.

Thermal energy is the term used to describe the energy present in a system that determines its temperature. The movement of thermal energy is heat.

The particles in a liquid gain more energy as it is heated and travel more quickly, causing the liquid to expand. As the liquid becomes warmer, the surface's most energetic particles vaporize and flee.

To know more about thermal energy visit:

https://brainly.com/question/11278589

#SPJ10

Considering the definition of empirical formula, the empirical formula of the potassium salt is KNO₃.

The empirical formula is the simplest expression to represent a chemical compound, which indicates the elements that are present and the minimum proportion in whole numbers that exist between its atoms, that is, the subscripts of chemical formulas are reduced to the most integers. small as possible.

In this case, you know:

Assuming a 100 grams sample, the percentages match the grams in the sample. So you have:

Then it is possible to calculate the number of moles of each atom in the molecule, taking into account the corresponding molar mass:

The empirical formula must be expressed using whole number relationships, for this the numbers of moles are divided by the smallest result of those obtained. In this case:

Therefore the K: N: O mole ratio is 1: 1: 3

Finally, the empirical formula is K₁N₁O₃= KNO₃.

Learn more about empirical formula:

brainly.com/question/21081934

brainly.com/question/5115389

brainly.com/question/4594902

brainly.com/question/13725914

brainly.com/question/13599051

brainly.com/question/13112542

#SPJ1

The law that explains the given observation of the formation of carbon monoxide and carbon dioxide is the law of multiple proportions.

The correct answer choice is option C.

The law of multiple proportions states that when an element combines with another element B to form more than one compound, the mass in which the different masses of A combine with a fixed mass of B are in simple multiple multiple ratios.

The law of multiple proportions can be explained below using C and O:

C combines with O to form carbon monoxide and carbon dioxide respectively.

Carbon monoxide can be formed by reacting 12 grams of carbon with 16 grams of oxygen.

However, to form carbon dioxide, 12 grams of carbon must react with 32 grams of oxygen.

Ratio of O in carbon monoxide and carbon dioxide = 16 : 32

Ratio of O in carbon monoxide and carbon dioxide = 1 : 2

Learn more about the law of multiple proportions at: https://brainly.com/question/2624012

#SPJ1

The purpose of the fourth pot that contained no fertilizer is to observe the actual growth of the plant without any fertilizers.

Fertilizers paintings by means of imparting vital vitamins to developing plants, bushes, and veg, as a form of multi-nutrition or meal substitute for the plant international. Many fertilizers additionally improve the way the soil works by helping it to maintain water higher and allowing air to drift freely, which is right for roots.

Fertilizers increase their growth via the application of fertilizer remedies. development in plant boom was notably discovered by means of the application of each natural and inorganic source of mineral vitamins.

The more fertilizer a crop gets, the faster it grows. We understand if a crop is supplied with too little fertilizer, plant increase response is negative; however if fertilizer charges are immoderate, plant increase slows and there is a potential for root harm or demise from high fertilizer salts.

Learn more about fertilizer here:-https://brainly.com/question/24544067

#SPJ1

30° Celsius is equivalent to 303° Kelvin (option A).

Temperature is a measure of cold or heat, often measurable with a thermometer.

Temperature can be measured in Kelvins, according to the standard international systems of units. Although it has other units of measurement such as;

The conversion factor of degrees Celsius to Kelvin is as follows:

K = °C + 273

According to this question, 30° Celsius is given. This measurement in Kelvins can be calculated as follows:

K = 30°C + 273

K = 303K

Therefore, 303K is the equivalent measurement of 30°C.

Learn more about temperature measurements at: https://brainly.com/question/11464844

#SPJ1

As the amplitude of a wave increases, the energy transmitted by the wave increases.

The amplitude of a wave is the maximum displacement of the wave. The amplitude of a wave is measured in meters.

The amplitude of a wave is related to the energy in a wave in the following equations;

P = ¹/₂μω²A²v²

where;

Thus, from the equation above, the energy of a wave or energy transmitted per second is directly proportional to the square of the amplitude of the wave.

Learn more about energy of a wave here: https://brainly.com/question/19036728

#SPJ1

When the salad dressing (consisting of water, oil, and vinegar) is thoroughly shaken, it is an example of a heterogeneous mixture, and not of a mixture of elements, a molecular compound or a homogenous mixture.

Water is a compound, while vinegar and oil are mixtures of compounds, so their mixture cannot possibly be a mixture of elements (option a) is eliminated). No new compound is formed upon their mixing, so it is not a molecular compound (eliminating option c)). The mixture of oil, vinegar, and water remains heterogeneous even when shaken, so option b) homogenous mixture is eliminated, with option d) heterogenous mixture remaining as the only possible option.

You can learn more about heterogenous mixtures here:

brainly.com/question/24898889

#SPJ4

Answer:

3.1 * 10^-19 joules

Explanation:

The equation you want to use is:
E=hc/lambda (lambda = wavelength).
It might also be given to you in the form:
E=constant/wavelength

since h = 6.626*10^-34, c = 2.998*10^8,  and the wavelength is 6.4*10^7, the values can be plugged into the equation to solve for the energy.

E=(6.626*10^-34 * 2.998*10^8) / (6.4*10^-7) = 3.1 * 10^-19 joules

niwwwwwwwwwwwwwwwwwwww

The equilibrium constant for the reaction at the given temperature is 273.03.

The equilibrium constant, Kc, for the reaction at the given temperature is calculated as follows:

Making an ICE table from the equation of the reaction and the given concentration values:

      H₂ (g) + I₂ (g) ⇌ 2 HI (g)

I      3.85     2.35        0

C     2.30    2.30     2 * 2.30

E      1.55    0.05      4.60

Kc =  [HI]² / [H₂] * [I₂]

Kc = (4.60)² / (1.55) * (0.05)

Kc = 273.03

Learn more about equilibrium constant at: https://brainly.com/question/19340344

#SPJ1

Complete question:

The following reaction was performed in a sealed vessel at 760 ∘C:

H₂ (g) + I₂ (g) ⇌ 2 HI (g)

Initially, only H₂ and I₂ were present at concentrations of [H₂] = 3.85M and [I₂] = 2.35M . The equilibrium concentration of I₂ is 0.0500 M .

What is the equilibrium constant, Kc, for the reaction at this temperature?

When more energy is needed than the calories that have been consumed to release energy from lipids stores throughout the body.

Calories are the unit of energy used by your body during food digestion and absorption. A meal might provide your body extra energy if it contains more calories. Your body stores extra calories as body fat if you eat more food than you need. Even foods without fat might have a significant number of calories.

The most effective way to burn calories is through aerobic exercise, which includes sports like swimming, cycling, and walking. Include at least 30 minutes of exercise each day as a general goal.

To know more about Calories visit:

https://brainly.com/question/22374134

#SPJ9

A detailed description of the reaction steps, along with information on the relative order and cost of forming and breaking bonds, is called a reaction mechanism.

Information is an important stimulus for the recipient in some contexts. Records are entered and stored on a computer but are commonly referred to as statistics. The definition of statistics is news or know-how acquired or provided. A data instance is what is provided to a person requesting information about something. Statistics is a generalized concept that refers to something that has the power to speak. At its most essential level, facts represent the translation of the perceptible. Proper record keeping is believed to improve decision-making, complement productivity, and give employers a competitive advantage that knows more than their competitors. Use facts.

People use the information to find meaning in a variety of situations. Sometimes they use notes as a tool to do real things (eg, to gain abilities or achieve goals). In other cases, statistics are used for cognitive purposes (eg generating ideas).

Learn more about Information here:

https://brainly.com/question/4231278

#SPJ1

Answer: 69.25 AMU

Explanation:

1. find missing %

knowing the first % abundance is 55 you are left with 45%

2. set up an equation

(55% * 67) + (45% * 72) = x

3. solve

(55% * 67) + (45% * 72) =x | break down to solve each part

55% * 67 =36.85 | can be done many ways ex: (55 * 67)/100 or .55 * 67

45% * 72= 32.4| can be done as previously expressed

36.85+32.4=69.25 AMU

1.64 L volume would be necessary to increase the pressure to 557.15 kPa.

In the physical sciences, pressure is defined as the perpendicular force per unit area or the stress at a point within a confined fluid. A 42-pound box with a bottom area of 84 square inches will press down on a surface with a pressure equal to the force divided by the area over which it is applied, or half a pound per square inch.

Atmospheric pressure, which at sea level is roughly 15 pounds per square inch, is the weight of the atmosphere pressing down on each unit area of the Earth's surface. One pascal is equal to one newton per square metre when expressed in SI units, which is how pressure is calculated. Nearly 100,000 pascals of atmospheric pressure are present.

We can obtain the answer using Boyle's Law

[tex]\frac{P_1 \times V_1}{T_1} = \frac{P_2 \times V_2}{T_2}[/tex]

As the temperature is constant,

[tex]P_1 \times V_1}= P_2 \times V_2}[/tex]

We have given that

P₁ = 3.5 atm    

    = 303.975 kPa            (One atm equals 101.325 kPa)

V₁ = 3.0 L

P₂ =  557.15 kPa

V₂ = To find

Lets substitute the values

⇒ 303.975 kPa × 3.0 L = 557.15 kPa × V₂

⇒ V₂ = (303.975 kPa × 3.0 L) / 557.15 kPa

⇒ V₂ = 1.64 L

Learn more about pressure

https://brainly.com/question/945436

#SPJ9

If the actual volume of the block was 145.3, then their percent error was −10.18%

The difference between an observed value and a true, accepted value is measured as percentage error. The outcome of data measurement frequently deviates from the actual value.

Error can occur for a variety of reasons, often related to human error, but also due to estimations and the limitations of the measurement tools used.

In any case, figuring out the percentage error in these situations can be helpful. The absolute error, or difference between the observed and true value, is used to calculate percentage error.

The relative error is then multiplied by 100 to produce the percentage error after the absolute error is divided by the true value.

Volume of a cube = s³

Volume of the cube is then

V = 5.08 × 5.09 × 5.1

V = 131.87 cm³

Percent errors are calculated by the following formula

%E = (V.a - V.e)/V.a × 100%,

where

%E = percentage error

V.a = actual volume

V.e = expected volume

Substituting the values we get

%E = (131.87 - 145.3) / 131.87 × 100%

%E = −13.43 / 131.87 × 100%

%E = −0.1018 × 100%

%E = −10.18%

Learn more about percentage error

https://brainly.com/question/20629401

#SPJ9

Looking at the Nernst equation (the equation used to calculate the reduction potential of a half-cell or a cell), we can conclude that the difference between [tex]E_{cell}[/tex] and [tex]E^{0}[/tex] is a function of absolute temperature and the reaction quotient.

The Nernst equation looks like this:
[tex]E = E^{0} -\frac{RT}{zF}lnQ[/tex]

[tex]E[/tex] is the reduction potential of the reaction in question,
[tex]E^{0}[/tex] is the standard electrode potential,
[tex]R[/tex] is the universal gas constant,
[tex]T[/tex] is the absolute temperature (in Kelvins),
[tex]z[/tex] is the number of electrons transferred in the course of the reaction,
[tex]F[/tex] is the Faraday constant, and
[tex]Q[/tex] is the reaction quotient calculated as the ratio of products and reactants

From this, we can see that the variables for the difference between [tex]E_{cell}[/tex] and [tex]E^{0}[/tex] for a given reaction are absolute temperature and reaction quotient, because [tex]R[/tex], [tex]F[/tex] and [tex]z[/tex] remain constant.

You can learn more about the Nernst equation here:
brainly.com/question/22724431

#SPJ4

the answer is no

Explanation:

the soaked potato is already immersed in water and is likely to get spoilt few days before the exposed potato.because a liquid medium has already been used. while the exposed potato still possesses its same properties as before

The skeletal system is the system that provides support to an organism, internal and made up of bones and cartilage in vertebrates, external in some other animals.

Tendon is a tough band of flexible but inelastic fibrous collagen tissue that connects a muscle with its bony attachment and transmits the force which the muscle exerts.

The femur is the bone that extends from the pelvis to the knee in humans. It is the largest bone of the human body.

The carpal bones are any of the eight bones of the carpus, which is the group of bones that make up the wrist.

The osseous or bone tissue is the major structural and supportive connective tissue of the body which forms the rigid part of the bone organs that make up the skeletal system.

Learn more about skeletal system at: https://brainly.com/question/4300043

#SPJ1

The average atomic mass of an element, which is shown in the element's box on most periodic tables, is the sum of the atomic masses of all its isotopes (at least, the isotopes that exist naturally). The average, nevertheless, is a weighted average.

The weighted average of an element's naturally occurring isotopes' atomic masses is that element's atomic mass.

The atomic mass is the average of the atomic masses of all the isotopes of a given element, weighted by their relative abundance in nature. Because various isotopes have different masses, it is a weighted average.

Due to its objectivity towards intermediate values and given average value, which most observations fall within, a weighted average is utilised. Furthermore, it is unaffected by extreme values or outliers. Outliers have an effect on the basic average.

Because there is no standard mass for an element, this is done.

Learn more about weighted average of isotopes refer

https://brainly.com/question/3826730

#SPJ10

Answer:The answer would be crepuscular! I actually study fireflies as a living after school!