A substance has the chemical structure C4H9N. Compound is a saturated acyclic hydrocarbon if the index of hydrogen shortage is zero.
IHD of 4: What does it mean?If everything went according to plan, you would have discovered that IHD = 4, which denotes a total of 4 rings and/or pi bonds. Pi bonds can form between two carbons (C=C, CC), two carbons and oxygen (C=O), two carbons and nitrogen (C=N, CN), two nitrogens (N=N), or two oxygen atoms (N=O). Any rings may or may not contain the N or O.
What is the degree of benzene's unsaturation or index of hydrogen deficiency?IHD=2(6)+2−62=4 I H D = 2 ( 6 ) + 2 − 6 2 = 4 . This supports the idea that benzene has one ring and three double bonds.
To know more about acyclic hydrocarbon visit:-
https://brainly.com/question/16497760
#SPJ4
What component of the proximal tubule, if not functional, would have the most severe effect on kidney function?
Answer: The Na+/K+ ATPase
Explanation: Located on the basolateral aspect of tubule cells, renal Na-K-ATPase plays a key role in the active translocation of Na and K across this membrane as well as in the "secondary active" transport of a number of other solutes.
what combination of ester and bromo-grignard reagent could you use to prepare the following tertiary alcohol? (select) draw structure ... bromo-grignard reagent
Esters are transformed into tertiary alcohols using a Grignard reagent reaction. A ketone is produced when one mole of Grignard reagent is added to the carbon-oxygen double bond, creating an unstable intermediate.
What takes place when esters and Grignard reagent interact?A potent nucleophile is the Grignard reagent. When it interacts with an ester, it goes through a nucleophilic addition process that results in ketone, which, when added to another substance, becomes tertiary alcohol.
Following acid hydrolysis and a reaction with the Grignard reagent, ketone and ester produce tertiary alcohol.
Tertiary alcohols esterify at a significantly slower pace than primary or secondary alcohols. Thus, tertiary alcohols as well as primary and secondary alcohols may be separated from mixtures by direct esterification with boric acid.
learn more about tertiary alcohols refer
https://brainly.com/question/13606529
#SPJ4
Temperature change affects the rate of a chemical reaction by changing the __________ of the colliding particle.
Temperature change affects the rate of a chemical reaction by changing the speed of the colliding particle.
In chemistry the rate of reaction is defined as the speed at which a chemical reaction proceeds. It is more often expressed in terms of either the concentration (amount per unit volume) of a product that is formed in a unit of time or the concentration of a reactant that is consumed in a unit of time.
The rate of the reaction can be affected by several factors which includes concentration, temperature, surface area and presence of a catalyst. Increasing concentration increases the number of effective collisions as concentration is directly proportional to effective collisions. Increasing temperature increases the kinetic energy of the particles, leading to more effective collisions which implies that temperature is directly proportional to effective collisions.
Learn more about collisions from the link given below.
https://brainly.com/question/13273634
#SPJ4
The active ingredient in Tums is calcium carbonate. One Tums tablet contains 500 mg of calcium carbonate. If the Daily Value (DV) for Ca2+ to maintain bone strength in older women is 1500mg, how many Tums tablets are needed each day?
If the daily value for Ca is 1500 mg, the number of Tums tablets needed by older women each day would be 7.5 tablets.
Stoichiometric problemCalcium carbonate consists of calcium and carbonate ions as follows:
[tex]CaCO_3 -- > Ca^{2+} + CO_3^{2-}[/tex]
Thus, for every 1 mole of calcium carbonate, 1 mole of calcium is involved.
Recall that: mole = mass/molar mass
500 mg of calcium carbonate would be equivalent to:
0.5/100 = 0.005 mol
The equivalent mole of calcium would also be 0.005 mol.
5 mol of calcium would be equivalent to:
0.005 x 40 = 0.2 grams or 200 mg of calcium.
This means that 1 Tums tablet, contains 200 mg of calcium. But 1500 mg is needed daily.
1500/200 = 7.5
This means that older women will need to take 7.5 tablets of Tums per day in order to meet up with the daily calcium requirement of 1500 mg.
More on stoichiometric calculation can be found here: https://brainly.com/question/27287858
#SPJ1
the electron-group arrangement around a central atom is defined by the number of –electron groups. the molecular shape is defined by the relative positions of the around the central atom. two species may have the same electron-group arrangement but have different molecular shapes.
The electron-group arrangement around a central atom is defined by the number of valence electron groups . The molecular shape is defined by the relative positions of the atoms around the central atom
The electrons present around the atom in the outer most shell are called as valence electrons. so, the electron group arrangement around the central atom is known as the valence electron groups. the two species may have the same electron group arrangement but have the different molecular arrangement. the molecular shape is depends upon the position of the atoms.
Thus, molecular shape is the position of the atoms that are around the central atom.
To learn more about valence electron here
https://brainly.com/question/13993867
#SPJ4
is all plastic polymers?
Polymers are all plastics, but not all plastics are polymers. Plastic is a particular type of polymer. Plastics are long-chain molecules formed by large monomers, whereas polymers are uniform molecules formed by small monomers.
What is polymer ?A polymer is a substance or material made up of very large molecules known as macromolecules that are made up of many repeating subunits. Both synthetic and natural polymers play important and ubiquitous roles in everyday life due to their broad range of properties.
All plastics are polymers, but not all polymers are plastic, implying that plastic is a subdivision of polymer. Polymers can be natural or synthetic, but plastics are synthetic.
All plastics are polymers, but not all polymers are plastics. The composition, physical properties, and applications of polymers and plastics are examined below to provide a clear explanation of the differences between the two.
Thus, Polymers are all plastics, but not all plastics are polymers. Plastic is a particular type of polymer.
To learn more about polymer, follow the link;
https://brainly.com/question/17354715
#SPJ1
1. CH4 + 02 → CO₂ + H₂O (not balanced)
If 15 moles of CH4 are reacted with 20
moles of 02, how many moles of excess
reactant remain?
CH4 + 2O2 → CO2 + 2H2O (Balanced equation)
Water will condense to liquid form at normal temperature.
One mole of oxygen is created when one mole of methane combines with two moles of oxygen.
7.5 moles of methane will react with 20 moles of oxygen to form 7.5 moles of carbon dioxide.
Hence, the resulting mixture will contain 7.5 moles of unreacted methane and 7.5 moles of carbon dioxide.
The total volume of the mixture will be 20 moles.
How many moles of oxygen are needed for the methane ch4 combustion reaction?
For full burning, 1 mole of methane needs 2 moles of oxygen.
What reaction is CH4 2O2 → CO2 2H2O?
Incomplete combustion
CH4 + 2O2 → CO2 + 2H2O
Incomplete combustion – carbon monoxide and water.
To know more about combustion visit
https://brainly.com/question/14335621
#SPJ1
How many grams of XeF6 are required to react with 0.321 L of hydrogen gas at 4.33atn
and 75°C in the reaction shown below?
XeF6(s) + 3 H₂(g) → Xe(g) + 6 HF(g)
To determine how many grams of XeF6 are required to react with 0.321 L of hydrogen gas at 4.33 atm and 75°C in the reaction shown below, we can use the ideal gas law, which states that the pressure, volume, and temperature of a gas are related by the equation PV = nRT, where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature of the gas in Kelvin.
In this problem, we know the volume of the hydrogen gas, the pressure of the hydrogen gas, and the temperature of the hydrogen gas, so we can use these values to calculate the number of moles of hydrogen gas present in the reaction:
Copy code
n = (PV) / (RT)
n = (4.33 atm * 0.321 L) / (0.08206 L*atm / mol*K * (75 + 273.15) K)
n = 0.025 mol
Next, we need to determine the number of moles of XeF6 required to react with 0.025 mol of hydrogen gas in the reaction shown below. We can do this by using the balanced chemical equation for the reaction, which is XeF6(s) + 3 H₂(g) → Xe(g) + 6 HF(g). From this equation, we can see that for every 1 mole of XeF6 that reacts, 3 moles of hydrogen gas are consumed. Therefore, to consume 0.025 mol of hydrogen gas in the reaction, we need 0.025 mol / 3 = 0.0083 mol of XeF6.
Finally, we need to convert the number of moles of XeF6 to grams. To do this, we can use the molar mass of XeF6, which is 221.0 g/mol. Therefore, 0.0083 mol of XeF6 has a mass of 0.0083 mol * 221.0 g/mol = 1.83 g.
In summary, to react with 0.321 L of hydrogen gas at 4.33 atm and 75°C in the reaction shown below, we need 1.83 g of XeF6.
A light shines on a metal surface but no electrons are observed to be leaving. What would we need to do experimentally to eject electrons from the surface?.
Increase the frequency of the light , is the observation.
What is frequency?
Frequency in physics refers to both the number of cycles or vibrations that a body in periodic motion experiences in a unit of time as well as the number of waves that pass a specific place in a unit of time. A body in periodic motion is considered to have experienced one cycle or one vibration after passing through a series of conditions or locations and then returning to its starting position. See also angular velocity and fundamental harmonic motion.
If one cycle or vibration takes half a second to complete, the frequency is two per second; if it takes one hundredth of an hour, it is one hundred per hour.
Learn more about Frequency from given link
https://brainly.com/question/254161
#SPJ4
for the phase transfer catalysis experiment: when running a pipet column with silica gel, what is the correct order in which compounds will elute out of the column?
The more polar chemicals are absorbed more strongly because the adsorbents are polar. As a result, non-polar substances are eluted first.
How can you tell which will dissolve first?The substance that elutes first has a lower charge. The ions we wanted to separate would have opposite charges in the stationary phase.
A stationary phase, often referred to as a sorbent or an adsorbent, is used in column chromatography and is typically packed in a glass column. Typical stationary phase materials include alumina and silica gel.
Large molecules are barred from all pores, thus they elute first, but small molecules can penetrate the entire intraparticular pore area and so elute last.
Highly charged cations elute first in an order that corresponds to their electrophoretic mobilities.
learn more about non-polar substances refer
https://brainly.com/question/29629020
#SPJ4
12 days Barium-131 is used in the detection of bone tumors. The half- life of barium-131 is approximately 12 days. How long will it take for the radiation level of barium-131 to drop to 1/4 of its original level? 48 days 24 days 6 days
Barium-131's radiation level won't be reduced to 1/4 of its original level until 24 days have passed.
How long will it take a sample of 131i to degrade by 50%?Iodine-131 is a radioisotope with an 8-day half-life as an illustration. It turns into xenon-131 through the emission of beta particles. Any sample of iodine-131 after eight days will contain 50% iodine-131 and 50% xenon-131 due to the disintegration of half of the sample's atoms.
As far as we are aware, radioactive reactions are first order reactions.
Given that barium-131's half life is 12 days,
It will therefore take an additional 12 days, or one more half life, for it to sink to 1/4 of its original level.
12 + 12 = 24 days total.
Barium-131's radiation level won't be reduced to 1/4 of its initial level until after 24 days.
To know more about radioactivity visit:-
https://brainly.com/question/1770619
#SPJ4
66.7 mL of Ethanol was dissolved in 222.2 mL of water. What is the volume % of the ethanol in the solution?
Respond with the correct number of signficant figures in scientific notation. (Use E notation and only 1 digit before decimal, for example, 2.5E5 for 2.5 times 10 to the power of 5)
The volume % of the 66.7 mL ethanol in the 222.2 mL of water solution is 30.0 %.
Given,
Volume of the solute = 66.7 mL
Volume of the solution = 222.2 mL
By using the volume % formula determine the volume % of ethanol, the percent by volume expression is given as follows,
Volume % = (volume of solute / volume of solution ) × 100 %
Volume % = (66.7 / 222.2 ) × 100 %
Volume % = 0.300 × 100 %
Volume % = 30 .0 %
( V / V ) % = 30.0 %
Thus, the percent by volume of ethanol is 30.0 %.
Learn more about percent volume of ethanol from the link given below.
https://brainly.com/question/23847585
#SPJ4
Which of the following has the least elastic potential energy?
A: a fully stretched rubber band
B: a rubber band sitting on a table
C: a rubber band pulling hair back
Answer:
B
Explanation:
B.
The rubber band is not being stretched which does not create any potential energy storage.
Quadrilateral efgh has the given measurements. Ef = 8 units fg = 15 units gh = 8 units eh = 15 units fh = 17 units eg = 17 units what conclusion can be made from the given information?.
A conclusion which can be made from the given information about quadrilateral EFGH is that: A. the quadrilateral is both a parallelogram and a rectangle.
What is Quadrilateral?
A quadrilateral is a closed object in geometry that is created by connecting four points, any three of which are not collinear. There are 4 sides, 4 angles, and 4 vertices in a quadrilateral. The word "quadrilateral" is derived from the Latin "quadra" (four) and "latus" (sides). A quadrilateral may or may not have equal sides on all four sides.
A polygon with four sides, four angles, and four vertices is called a quadrilateral. The arrangement of the vertices must be taken into consideration whenever a quadrilateral is named. The following quadrilateral, for instance, should be referred to as ABCD, BCDA, ADCB, or DCBA. Since they alter the order of vertices in which a quadrilateral is generated, it cannot be termed ACBD or DBAC.
In this scenario, we can reasonably infer and logically deduce that quadrilateral EFGH is both a parallelogram and a rectangle because the length of its diagonal are equal and it has adjacent sides of equal of length.
Learn more about Quadrilateral from given link
https://brainly.com/question/28879819
#SPJ4
Ethanol is manufactured by two different process... for each process, name the organic reactant and state the type reaction
[tex]\bold{\huge{\underline{Answer}}}[/tex]
Ethanol is manufactured by two different process :-By hydrolysis of ethene By hydrolysis of alkyl halide Preparation of ethanol by hydrolysis of ethene Step 1 : - Add concentrated sulfuric acid to ethene at a pressure of 30 atm and temperature upto 80°C , It will result into the formation of ethyl hydrogen sulphate.Reaction :-
[tex]\sf{C2H4 + H2SO4}{\sf{\underline{\,\,80{\degree}/30atm \,\,}}}{\sf{C2H6SO4}}[/tex]Step 2 :- Now , On hydrolysis of ethyl hydrogen sulfate with boiling water, it will result into the formation of ethanol.Reaction :-
[tex]\sf{C2H6SO4 + H2O}{\sf{\underline{\,\,yeilds\,\,}}}{\sf{ethanol}}[/tex]
Preparation of ethanol by hydrolysis of alkyl Halide :-Ethanol belongs to alcohol family. We can prepare alcohols/ethanol on hydrolysis of alkyl halide with a warm dilute alkali metalsReaction :-
[tex]\sf{C2H5Cl+ KOH}{\sf{\underline{\,\,boils\,\,}}}{\sf{C2H5OH + KCl}}[/tex]
Process 1:
Organic reactant: Ethylene (C₂H₄)
Type of reaction: Addition reaction
Process 2:
Organic reactant: Carbon monoxide (CO) and hydrogen (H₂)
Type of reaction: Catalytic hydrogenation
1. In the first process, ethanol can be manufactured by the addition reaction of ethylene (C₂H₄). Ethylene, a hydrocarbon, undergoes an addition reaction with water (H₂O) in the presence of a catalyst to produce ethanol (C₂H₅OH). The reaction involves breaking the carbon-carbon double bond in ethylene and forming new single bonds with two hydrogen atoms from water, resulting in the formation of ethanol.
2) In the second process, ethanol can be manufactured through a catalytic hydrogenation reaction. This involves reacting carbon monoxide (CO) and hydrogen (H₂) in the presence of a suitable catalyst, such as copper or zinc, at elevated temperature and pressure. The reaction proceeds via the reduction of carbon monoxide and the addition of hydrogen atoms, leading to the formation of ethanol (C₂H₅OH).
This process is commonly known as the "synthesis gas fermentation" or "syngas fermentation" and is an essential method for producing ethanol from syngas derived from various feedstocks.
To learn more about Ethylene (C₂H₄) here
https://brainly.com/question/11441459
#SPJ2
a responder can protect himself/herself from radiation by using shielding as a response action. what materials are best for protecting against alpha particles?
The best material that can protect alpha particles are few millimeter thick aluminium, water, wood, acrylic glass or plastic.
The materials which are best for protection against beta particles are few millimeter thick of aluminium, but for the high energy beta-particles radiations the low atomic mass materials such as plastic, wood, water and acrylic glass are advisable and can be used.
The above materials (aluminium, water, wood, acrylic glass or plastic) can also be used in personal protective equipment which includes all the clothing that can be worn to protect us against any injury or illness due to the exposure to radiation.
Learn more about alpha particles from the link given below.
https://brainly.com/question/3981055
#SPJ4
100 POINTS AND BRAINLIEST PLEASE HELP ASAP For this assignment, you will write a research essay, or create a presentation, about a scientist who contributed knowledge to the field of chemistry. Your essay, or presentation, should include the following information about your scientist: Describe your scientist's contributions and innovations to his or her field. How did your scientist's research and data influence future use of his or her findings? Describe the background, interests, or goals that affected your scientist's observations and conclusions. Once you have selected a scientist, you will need to locate at least three different reliable resources to use to conduct your research. You may use textbooks, the Internet, or library books. These resources should be cited within your presentation and should be listed in a bibliography that you submit with your essay, or slide presentation. Use the Citations, Essay Writing, and Finding Reliable Resources tutorials to guide your writing. If you have another method by which you would like to present your research findings, please have it approved by your instructor before you begin writing. No matter what presentation style you choose, be sure to use complete sentences and paragraphs, and include all of the necessary research required. You should also review the grading rubric before you begin. Select one of the following scientists, or pick another scientist of interest with your instructor's permission, to conduct your research on: Yuan T. Lee
Given below is an essay on Yuan T. Lee.
Yuan T. Lee, whose full name is Yuan Tseh Lee, was born in Hsin-chu, Taiwan, on November 29, 1936. He is a Taiwanese-American chemist who shared the 1986 Nobel Prize in Chemistry with Dudley R. Herschbach and John C. Polanyi for his contributions to the study of chemical-reaction kinetics.
Lee completed his education at the University of California, Berkeley and in Taiwan (Ph.D., 1965). After completing postdoctoral studies at Harvard and Berkeley, he taught at the University of Chicago from 1968 until 1974. He relocated from Chicago to Berkeley after becoming a citizen in 1974, where he continued his research.
As a postdoctoral researcher, Lee experimented with and improved Herschbach's invention of the "crossed molecular beam technique," which brings together beams of molecules at supersonic speeds under controlled circumstances to enable close observation of the events that take place during chemical reactions. This method is derived from elementary particle physics. In order to further develop Herschbach's method, Lee used mass spectroscopy. This allowed him to recognize the byproducts of the reactions between oxygen and fluorine atoms and intricate organic molecules.
References:
https://www.britannica.com/biography/Yuan-T-Lee
https://www.infoplease.com/biographies/science-technology/yuan-t-lee
To learn more about scientist from the link given below
https://brainly.com/question/17450573
#SPJ1
How much heat must be added to 1755 grams of liquid water at 100°C to completely vaporize?
The quantity of heat that must be added to 1755 grams of liquid water at 100°C to completely vaporize is 3.976 * 10³ kJ of heat.
What is the amount of heat required to completely vaporize 1775 grams of liquid water at 100°C?The amount of heat required to completely vaporize 1775 grams of liquid water at 100°C is calculated below as follows:
Heat required = mass * latent heat of vap[orization of water
The latent heat of vaporization of water is the amount required to vaporize a unit mass of water at its boiling point.
The latent heat of vaporization of water is 2240 J/g.
Heat required = 1775 g * 2240 J/g
Heat required = 3.976 * 10³ kJ
Learn more about latent heat of vaporization at: https://brainly.com/question/14497212
#SPJ1
The half-life of cobalt-60 is 5. 20 yr. How many milligrams of a 1. 000-mg sample remain after 9. 50 years?.
The half-life of the nuclide for which you are calculating activity is given by t1/2, and the natural logarithm of 2 is approximately equal to 0.693.
Therefore, the Co-60 decay constant is 0.693/5.27 years, which you would read as 0.1315 yr-1, or 0.1315 per year.
What does 1.0 g of cobalt 60 have in terms of total activity?A half-life is the length of time it takes for half of a radioactive atom to decay.
For instance, the previously stated technetium-99m has a six-hour half-life, which implies that, starting at 100%, we will have 50% remaining after six hours.
The period of time it takes for a drug's plasma concentration to drop to half its initial value is known as its half-life.
Learn more about half-life of cobalt-60 refer
https://brainly.com/question/9963723
#SPJ4
If you dissolve 10. 0 g of compound x in 100. 0 ml of distilled water, the liquid turns red. The temperature of the liquid stays at 24 °c for 10 minutes. Why would you not want to sell a cold pack made with compound x?.
I would not want to sell a cold pack made with compound because a substance that instantly cools the water temperature should be used in a cold pack otherwise, the cold pack is useless.
Describe temperature?
Temperature is described as the measure of hotness or coldness expressed in terms of any of several scales, including Fahrenheit and Celsius.
Taking into account the factors given in the scenario, a considerable amount of compound X is dissolved in a relatively small volume of water, the water turns red, and the temperature remains the same for 10 minutes, which is a long time for the function it is intended for.
Cold packs are used to cool the body's areas and alleviate pain by placing the relatively very cold pack onto the object or area to be cooled. So therefore, a substance that instantly cools the water temperature should be used in a cold pack; otherwise, the cold pack is useless. Thus, we would not sell a cold pack with compound X as the active ingredient.
Learn more about temperature at: https://brainly.com/question/26866637
#SPJ1
You are investigating an experimental veterinary procedure. What would be the most reliable resource?.
Research design, Models of animal, Animal experimentation and other become would be the most reliable resource.
It is commonly make use in daily life and it is remain as important place among the people and other industries.,
They have ability to move forward and provide winning support for the major people in a fine manner.
I believe that the most reliable resource would be to visit a local animal hospital.
Since it is an experimental veterinary procedure, you won't find much information in books or online. And contacting the local society for veterinarians may not yield results.
To know more about experimental veterinary procedure here
https://brainly.com/question/16989839
#SPJ4
When scientists study ice cores, how many
general parts to an ice core do they look at?
1-2
2-3
3-1
4-4
What happens to the electrons involved in an ionic bond?
A) They are shared between two nonmetal atoms.
B) They are transferred from a nonmetal atom to a metal atom.
C) They are shared between multiple metal atoms.
D) They are transferred from a metal atom to a nonmetal atom.
Answer: The answer is D
Explanation: Ionic bonds transferred to metals to nonmetals.
While covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms.
66. 7 ml of ethanol was dissolved in 222. 2 ml of water. What is the volume % of the ethanol in the solution?.
The volume of He in the ethanol solution is 10.
What is volume?Volume' is a mathematical of the quantity that shows the amount of three-dimensional space of a occupied by an object or a closed surface.
Aires total pressure of hydrogen helium 7 56. Star mole fraction of helium is 0.75. And we have to find out partial pressure of hydrogen because total pressure is given and mole fraction of helium is given. So eucalyptus first find out partial pressure of helium. So partial pressure of William is equal to mull faction of William multiplied by total pressure. So let us this PPT. So mole fraction of helium is zero points and favors for the question Total Price 37 56. So we are getting unsolved. Ng 5 to 67 30. This is the partial pressure of for helium. Now, to get the partial pressure of hydrogen, mm hmm will subtract Partial pressure of helium from parcel total pressure. So pity minus partial pressure of helium. Total pressure is 756 livered by minus 5 67. So you are getting 1 89 thought. So, this is the first part of the question. , since the volume a vessel is since the volume of the cell is telling you that this must be the volume of Helium. Also, therefore, volume of William, volume occupied by the William is also 10 liter and volume occupied by Harrison is also 10 later because a gas occupies the entire volume in a vessel.
To know more about volume click-
https://brainly.com/question/463363
#SPJ4
if the initial concentration of ab is 0.220 m , and the reaction mixture initially contains no products, what are the concentrations of a and b after 80 s ?
The A = B = 0.094 M.
In chemistry, attention is the abundance of a constituent divided by means of the total extent of an aggregate. several types of mathematical description can be distinguished: mass concentration, molar awareness, number awareness, and quantity attention.
The act or process of concentrating the state of being focused. particularly the direction of attention to an object. All that noise is annoying my concentration and academic importance or location of focus within a first-rate.
The concentration of the answer tells you ways plenty of solutes have been dissolved within the solvent. as an example, in case you upload one teaspoon to two cups of water, the concentration might be reported as 1 t salt in keeping with 2 c water. The vinegar label will file that the solution is 5% by means of the weight of acetic acid.
Learn more about concentrations here:-https://brainly.com/question/1034688
#SPJ4
What is the relative atomic mass for pivotium?
The relative atomic mass for pivotium is 417.9 amu. The ratio of the average mass of atoms of a chemical element in a particular sample to the atomic mass constant is known as relative atomic mass.
How to calculate?Multiply the mass by the % written as a decimal and add the result.
426X0,11 + 417X 0.89 = 417.99 or 418
check 90% is. 417 only 10% 426
417X.9 +(426X0.10)=417.9
What are the atomic masses relative?The ratio of the average mass of atoms of a chemical element in a particular sample to the atomic mass constant is known as relative atomic mass (symbol: Ar; sometimes abbreviated RAM or r.a.m. ), also known by the deprecated synonym atomic weight.
What are mass, both absolute and relative?While absolute mass is the total mass of the protons and neutrons, relative mass is the average atomic mass of all the isotopes present as a percentage. For instance, the average atomic mass of carbon based on the fraction of C-12, C-13, and C-14 isotopes is 12.01 but the absolute mass of carbon is 12.0 amu.
Learn more about pivotium here:
https://brainly.com/question/28776720
#SPJ1
what does our current understanding of mantle indicate about plumes? how do you know?
Plumes are thought to rise when the mantle's base grows hotter and more buoyant. Plumes are thought to ascend through the mantle and partially melt when they reach shallow depths in the asthenosphere due to decompression melting. This would result in massive amounts of magma.
What causes a mantle plume?A mantle plume is a region under the Earth's hard crust where magma is hotter than surrounding magma. The heat from this extremely hot magma melts and thins the hard crust, resulting in extensive volcanic activity on Earth's surface above the plume.
A hot narrow buoyant upwelling that rises from deep inside the mantle and is often related to thermal instability in a tiny layer near the core-mantle boundary.
Learn more about mantle plume refer
https://brainly.com/question/1935178
#SPJ1
3) What amount of heat will change 78g liquid water at 30 o C to vapor at 200 o C?
Assuming we’re not freezing the water into ice, the specific heat capacity of water is 4.2 J/g°C.
78* 30°C = 2340g°C
4.2J/g°C * 2340°C = 9828Joules or98.2 kJ.
How many Joules are required to convert one gram of 100 °C water into steam?The heat of vaporization for water at its boiling point of 100 oC is 2260 J g-1. This means that 2260 J of heat must be absorbed by the water in order for it to change from 1 g of water at 100 oC to 1 g of steam at 100 oC.
What does the chemical symbol H mean?The amount of heat released or absorbed during a reaction that takes place under constant pressure is referred to as the enthalpy change. It has the sign H, which can be interpreted as "delta H."
To know more about the heat here:
brainly.com/question/1253173
#SPJ4
Where did the 2 come from?
Answer:
somewhere
Explanation:
Under which conditions is a gas likely to experience the fewest intermolecular forces?.
Higher temperatures and lower pressures produce optimum gas behaviour. Because of the gas's intermolecular interactions, potential energy becomes significantly lower than kinetic energy under these circumstances.
What is potential energy?
Potential energy is a form of energy that is stored but is dependent on the relative positions of different system components. Stretching or compressing a spring increases its potential energy. A steel ball has more potential energy when it is raised above the surface of the earth than when it is brought to Earth.
Any object that is raised from rest has energy that can be released at a later time; for this reason, it is referred to as potential energy.
Therefore, Higher temperatures and lower pressures produce optimum gas behaviour.
To learn more about potential energy
Here: https://brainly.com/question/13997830
#SPJ4