the answer of these question is weight
Why will a toy train remain still if you push on the engine with
A force of 3 N and your friend push on the caboose with a
Force of 3 N?
Explanation:
Because when two equal forces are applied from opposite directions, they "eliminate" each other.
The train would go right if a 3N force was only applied in the right direction, and it would go left if the same force was only applied to the left.
If a 3N force was applied to the right and a 2N force to the left, it would equal a 1N force to the right (3-2=1).
But there it's 3-3=0, so in practice the force is 0N. Therefore the train won't move.
which of the following is the correct equation for photosynthesis
Answer:
6CO2 + 6H20 + ENERGY = C6H12O6 + 6O2
Explanation:
Carbon dioxide + water + energy from light produces glucose and oxygen
A researcher is measuring changes in the density of the upper atmosphere over time. Which units should be used for the density measurements?
Answer:
lbm/ft³ or psi/ft
Explanation:
The description in the question shows the density to measured is that of gases (upper atmosphere). The density of a gas can be described as the mass of the gas divided by the volume of the gas at a certain temperature and pressure. It's unit can be represented as lbm/ft³ or psi/ft.
NOTE:
"lbm" means "lean body mass" which is a unit for mass or weight and can be described as the pound mass
"psi" means "pound per square inch"; is also a unit for mass or weight
Which of the following is a reaction between an acid and a base?
HCI + NaOH + H2O + NaCl
CaCl2 + K25 + CaS + 2KCI
NaCl + AgNO3 →→ NaNO3 + AgCl
C3H8 + 502 + 3CO2 + 4H2O
The first one
HCl is a strong acid and NaOH is a strong base which will react and make H2O and NaCl
3. The water in a beaker has a mass of 200 g. An electric current is
tumed on in the water for two hours. Afterward the water has a
mass of only 176 g. What happened to the missing mass?
Answer:
Through electrolysis, some of the water became hydrogen gas and oxygen gas
Explanation:
I just took a test on this online.
The passage of current through water results in the formation of hydrogen gas and oxygen gas. This both will evolves out and the remaining water will have lessor mass than the initial.
What is electrolysis?Electrolysis is the process of conversion of electrical energy to chemical energy by applying an electric field. Electrolysis involves an electrolyte which can conduct by furnishing ions.
Generally electroanalytical cells involves two metallic electrodes which are immersed in a molten electrolyte containing the same metal ions.
When an electric current is passed through water, it will undergo electrolysis and produce hydrogen and oxygen in gaseous state. These gases bubbles out from the water and therefore, there occurs a mass loss for water.
To find more about electrolysis, refer the link below:
https://brainly.com/question/12054569
#SPJ2
In which Group do most of the elements have 8 valence electrons?
A. Transition metals
B. Alkaline earth metals
C. Halogens
D. Noble gases
PLZ ANSWER WILL GIVE BRAINEST Based on the information in the table, which elements are most likely in the same periods of the periodic table?
-Boron and carbon are likely together in one period because they have very close atomic numbers, while gallium and germanium are likely together in another period because they have very close atomic numbers.
-Aluminum, boron, and carbon are likely together in one period because they were first isolated in the first half of the 1800s, while gallium and germanium are likely together in another period because they were first isolated in the second half.
-Boron and carbon are likely together in one period because they each end in “-on,” while aluminum, gallium, and germanium are likely together in another period because they each end in “-ium.”
-Aluminum, boron, and gallium are likely together in one group because they have the same number of valence electrons, and carbon and germanium are likely together in another group because they have the same number of valence electrons.
Answer:
Aluminum, boron, and gallium are likely together in one group because they have the same number of valence electrons, and carbon and germanium are likely together in another group because they have the same number of valence electrons.
Explanation:
Answer: The correct answer is
Aluminum, boron, and gallium are likely together in one group because they have the same number of valence electrons, and carbon and germanium are likely together in another group because they have the same number of valence electrons.
This is the only one that makes sense after reviewing the data. Hopefully this helps! Feel free to mark as brainliest!
How do I convert 3.221×10^−3 mm to standard notation
Answer:
0.003221
Explanation:
When we multiply anything by 10 times a power, we follow the base 10 decimal system.
To convert 3.221 × 10⁻³ from scientific notation to standard notation, simply move the decimal place 3 places to the left:
3.221 × 10⁻³ = 0.003221
plz tell me I will also give brainiest. forces can be ________ or unbalanced
Answer:
balanced
Explanation:
hope this helps
Answer:
[tex] \boxed{ \bold{ \huge{ \boxed{ \sf{ \: Balanced}}}}}[/tex]
Explanation:
Forces can be balanced or unbalanced.
[tex] \bigstar {\sf{ \: \: Balanced \: force}}[/tex]
When a number of forces acting on a body do not change its state of rest or uniform motion in a straight line , the forces are said to be balanced forces. For example : In the game of tug of war, two teams pull a rope in opposite directions. When the two teams exert equal and opposite forces on the rope, the rope remains steady and does not move in any direction. It appears as if no force is acting on the rope. Thus, the two forces acting on the rope in this case are balanced forces.
[tex] \bigstar{ \sf{ \: Unbalanced \: force}}[/tex]
When a number of forces acting on a body change it's state of rest or uniform motion in a straight line, the forces are said to be unbalanced forces. For example, if we push a toy car towards east, it moves towards east. If it is pushed towards west, it moves towards west. This unbalanced force produces motion.
Hope I helped!
Best regards! :D
~TheAnimeGirl
Which statement describes a chemical property that many elements might share?
A. bonds easily with oxygen in the air
B. boils between 90°C and 100°C
C. shines when polished
D. floats in water
ANSWER:
I think its B.
A scientist grew bacteria on gel in her lab.
She wanted to find out if bacteria would grow faster on gel A or gel B.
she placed a few bacteria on gel A and a few on gel B.
After 24 hours, she observed how many bacteria were present.
Identify the independent and dependent variables.
Answer:
The independent variable is type of gel and the dependent variable is the number of bacteria.
Explanation:
An experiment generally tests how one variable is affected by another. The affected variable is called the dependent variable. In the plant experiment shown above, the dependent variable is plant growth. The variable that affects the dependent variable is called the independent variable. In the plant experiment, the independent variable could be fertilizer—some plants will get fertilizer, others will not. The scientists change the amount of the independent variable (the fertilizer) to observe the effects on the dependent variable (plant growth). An experiment needs to be run simultaneously in which no fertilizer is given to the plant. This would be known as a control experiment. In any experiment, other factors that might affect the dependent variable must be controlled. In the plant experiment, what factors do you think should be controlled? (Hint: What other factors might affect plant growth?)
Which subatomic particles were discovered, disproving the part of Dalton's atomic theory that said an atom is "indivisible?" Question 3 options: A) neutrons B) ions C) protons D) electrons E) isotopes
Answer: D) Electrons
Explanation:
Daltons atomic theory was electrons
which of the following is a scientific law?
climate changing a
nodvnfosdjfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfvhnfv
its a
Answer:
Climate change
how many balance electrons does sodium have
Answer:
1
Explanation:
Answer:
it has one valence electron
What is the difference between magma and lava?
Help PLZ!!!!!!
A Magma is molten rock within the earth; lava is molten rock on the earth's surface.
B Magma is cool, lava is very hot.
Magma is very hot, lava is cool,
Magma is molten rock on the earth's surface; lava is molten rock within the earth.
Answer:
the answer is A. Magma is molten rock within the earth; Lava is molten rock on the earth's surface
Answer:
A Magma is molten rock within the earth
Explanaton:
A loaf of bread has a mass of 0.5kg and a volume of 2500cm³. what is the density of the bread
Density is mass divided by volume.
Since mas is 0.5kg we need to convert it to grams. Using conversion factors we get the mass of the bread to be 500g.
So densty=500/2500
density =1/5 grams per cubic centimeter
:)
As the frequency of electromagnetic waves increases, what happens to the wavelength?
O It increases.
O It decreases
It fluctuates.
O It remains constant.
Answer:
It decreases.
Explanation:
As the frequency of electromagnetic waves increases, the wavelength decreases.
What is frequency?Frequency defines the number of waves passing through a fixed area over a period of time. So if the time we take for the wave to pass is 1/2 second, it is usually 2 per second. If it takes 1/100 of an hour, it is usually 100 per hour.
What is an example of frequency?The definition of frequency is how often something happens. An example of blinking an eye blink 47 times in one minute. (physics) The degree to which a recurring event occurs, such as a full-wave cycle.
Learn more about frequency here https://brainly.com/question/10728818
#SPJ2
What is the mass of a
12.31 cm3 piece of
copper having a density of
8.96 g/cm3
Answer:
110.30 grams
You have to multiply by 8.96.
12.31 x 8.96 = 110.30 grams.
Therefore, that is your answer.
(Sorry I had to answer twice it was because of LukeG1).
An atomic number stands for the number of _____. neutrons in the nucleus of an atom protons in the nucleus of an atom valence electrons in an atom protons plus neutrons in the nucleus of an atom
Answer:
atoms or electrons
Explanation:
but l guess electrons is the best answer
3. A gold ring has a mass of 67.0 grams. When
placed in a graduated cylinder containing 10 ml of
water, the water rises to 13.47 ml. Calculate the
density of the ring.
I
Answer:
The answer is
19.3 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]
From the question
mass = 67 g
Volume of ring = new volume of water - original volume of water
Volume = 13.47 - 10 = 3.47 mL
Substitute the values into the above formula and solve
That's
[tex]Density = \frac{67}{3.47} \\ = 19.308357[/tex]
We have the final answer as
19.3 g/mLHope this helps you
2. What is the ratio of protons to electrons in all normal atoms?
Given :
Normal atom.
To Find :
The ratio of protons to electrons in all normal atoms.
Solution :
Here normal atom means neutral atoms i.e atoms whose charge is zero.
Atom charge is zero when number of proton are equal to number of electrons.
[tex]N_p=N_e[/tex]
So, [tex]\dfrac{N_p}{N_e}=1[/tex]
Therefore, the ratio of protons to electrons in all normal atoms is 1.
Hence, this is the required solution.
HELP ASAP
What is volume? O A. The measure of the amount of space a substance takes up B. The measure of the amount of space per unit of volume O C. The measure of the amount of matter per unit of volume O D. The measure of the amount of matter in a substance
Answer:
A. The measure of the amount of space a substance takes up
Explanation:
two samples of the same material are touching directly.
1.) Name the process is happening
2.) Describe in what direction the heat will flow and why
Answer:
1) The process that occurs were two items are in direct contact with each other is known as conduction. Conduction is the form of heat transfer that occurs or requires the direct contact of two bodies before it can take place
2) In heat transfer, heat would flow from the hotter sample sample through the process of conduction until thermal equilibrium is established
Explanation:
A heterogeneous mixture is
Answer:
simply any mixture that is not uniform in composition - it's a non-uniform mixture of smaller constituent parts
Explanation:
i think it may wrong
5. If a block of wood has a density of 0.6 g/cm3 and a mass of 120 g, what is its volume? (D= M/V)
Answer:
200 cm^3
Explanation:
V = M/D
V = 120g / (0.6g/cm^3)
V = 200 cm^3
In this case, the volume is 200 cm^3.
What is density?
Density is defined as the mass of a material substance per unit volume. The equation for density is d = M/V, where d stands for density, M for mass, and V for volume. Grams per cubic centimetre are a typical unit of density measurement.
For instance, the density of Earth is 5.51 grammes per cubic centimetre, but the density of water is 1 gramme per cubic centimetre. Kg/m3 is another way to measure density (in metre-kilogram-second or SI units). For instance, the air has a density of 1.2 kilogrammes per cubic metre.
Textbooks and manuals provide lists of the densities of common solids, liquids, and gases. The mass of a body may be calculated from its volume using density, and vice versa. The mass is equal to the volume multiplied by the density (M = Vd), whereas the volume is equal to the mass divided by the density (V = M/d).
You may calculate a body's weight by multiplying its mass by the acceleration of gravity, which is typical of more practical significance than its mass. Additionally, there exist tables that indicate the weight of various substances per unit volume; this amount is sometimes referred to as specific weight, weight density, or unit weight.
Instead of referring to the density of a single particle, the term "particle density" refers to the number of particles per unit volume and is typically written as n.
Therefore, here the volume is 200 cm^3.
Read more about density, here
https://brainly.com/question/15164682
#SPJ2
Which is one source from which metamorphic rocks form?
soil particles
igneous rock
molten material
sand particles
Answer:
Option B:igneous rock
Explanation:
Metamorphic rocks are formed as a result of heat and pressure transforming the original or parent rock completely into a new rock. Now this original or parent rock can either be sedimentary, igneous, or another metamorphic rock.
Thus, looking at the options, the only source of metamorphic rocks is from igneous rocks.
Answer:
B
Explanation:
Took the test
Is the copper in a copper wire a homogeneous or heterogeneous mixture
Based on what you observed, what ideas do you
have about the missing piece? What can you
visualize about the missing piece?
is pepperoni pizza an element, compound,
heterogeneous mixture, or homogeneous mixture?
Pepperoni pizza is a heterogeneous mixture. Therefore, option C is correct.
A heterogeneous mixture is a type of mixture that consists of visibly different substances or phases that are not uniformly distributed. In a heterogeneous mixture, the different components can be easily distinguished and separated. The composition and properties of the mixture can vary at different locations within the mixture.
In a heterogeneous mixture, the substances do not blend together at the molecular level, unlike in a homogeneous mixture where the components are uniformly distributed.
Learn more about heterogeneous mixtures, here:
https://brainly.com/question/24898889
#SPJ6
Who discovered the flame test
Answer:
Thomas Melvill
Explanation:
...