what is the difference between malleability and ductile ??

Please don't post invalid answer please..!!

Please post correct answer please..!!​

The final speed of the electron, denoted as [tex]$v_{\text{final}}$[/tex], when it is 10.0 cm away from charge 1 can be calculated using the principles of electrostatics.

The initial position of the electron is at the midpoint between the two charges. We know that the charges are positive and stationary. Therefore, the electric field produced by charge 1 points towards charge 2. As the electron is negatively charged, it will experience a force in the opposite direction, i.e., towards charge 1. This force will cause the electron to accelerate.

To calculate [tex]$v_{\text{final}}$[/tex], we can use the conservation of energy. Initially, the electron is at rest, so its initial kinetic energy is zero. The final kinetic energy is given by [tex]\frac{1}{2mv^2_{final}}[/tex], where m is the mass of the electron. The change in potential energy is given by [tex]$q\Delta V$[/tex], where q is the charge of the electron and [tex]$\Delta V$[/tex] is the change in electric potential.

The change in potential energy can be calculated by considering the electric potential at the midpoint and at a point 10.0 cm from charge 1. The electric potential at a point due to a point charge is given by [tex]$V = \frac{kq}{r}$[/tex], where k is the electrostatic constant, q is the charge, and r is the distance from the charge. By considering the signs and magnitudes of the charges, we can determine the change in potential energy.

By equating the initial kinetic energy to the change in potential energy, we can solve for [tex]$v_{\text{final}}$[/tex]. The mass of an electron is known, and the values for the charges and distances are provided in the problem. Converting the given values to SI units (coulombs and meters), we can perform the necessary calculations to find the final speed of the electron.

To learn more about electrostatics refer:

https://brainly.com/question/30253781

#SPJ11

A rod of length 9 meters and mass 9.7 kg can rotate about one end. The speed of the tip in m/s as the rod passes through the horizontal position is 0.7542a meters/second.

We have a rod which is rotating about one end, and it has a length of 9 meters and mass of 9.7 kg. Now, the rod is released from rest at an angle of a degrees above the horizontal. We have to find the speed of the tip in m/s as the rod passes through the horizontal position.

The formula used to find the speed of the tip in m/s as the rod passes through the horizontal position is:

v = ωr

where, v is the velocity of the tip

ω is the angular velocity

r is the radius of the rod

First, we have to calculate the radius of the rod. Radius of the rod, r = Length of the rod / 2= 9 / 2= 4.5 meters. Now, we  can use the equation of torque to find the angular velocity.

τ = Iα

Where, τ is the torque

I is the moment of inertia

α is the angular acceleration

We have to consider the whole rod as a single point mass which rotates about an end. The moment of inertia of the rod can be calculated as I = ml² / 3, where m is the mass and l is the length of the rod.

Now, I = (9.7 × 9²) / 3= 261.8 kgm² Torque τ is given by,

τ = Fr

where F is the force which is acting on the rod to make it rotate. r is the radius of the rod

We can break the weight of the rod into horizontal and vertical components. Force acting horizontally on the rod = Fh = F sin α

Where F is the weight of the rod

Force acting vertically on the rod = Fv = F cos α

As the rod is released from rest, initial angular velocity will be 0.

Now we can use the equation of torque to find the angular velocity

τ = Iατ = Fr

Frsinα = Iα

α = (rsinαF) / Iα = (4.5 sin a × 9.8) / 261.8

α = 0.1676a rad/s

Now we can calculate the velocity of the tip using the formula,

v = ωr= 0.1676

a × 4.5= 0.7542a meters/second

The speed of the tip in m/s as the rod passes through the horizontal position is 0.7542a meters/second.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11

Koko Head, Rabbit Island, Koko Crater, and Hanauma Bay are all geologically related to the Koko Crater Complex, which is a volcanic feature located on the island of Oahu, Hawaii.

They are all part of the same volcanic system and share similar geological origins. The Koko Crater Complex is characterized by tuff cone formations, which are created by explosive volcanic eruptions. These features have been shaped by volcanic activity and erosion over time, resulting in their distinct geological characteristics. The Koko Crater Complex is known for its tuff cone formations, which are created by explosive volcanic eruptions. These geological features have contributed to the unique landscape and characteristics of the area.

To learn more about geologically, https://brainly.com/question/4254238

#SPJ11

To find the index of refraction of the liquid, we can use the formula for the critical angle:

The index of refraction of a medium can be determined using the formula: n = 1 / sin(critical angle) where n is the index of refraction and the critical angle is measured in radians. To convert the critical angle from degrees to radians, we use the conversion factor π/180. In this case, the critical angle is 47.2 degrees. Converting it to radians: critical angle (in radians) = 47.2 degrees × π/180 ≈ 0.823 radians. Now we can calculate the index of refraction: n = 1 / sin(critical angle) ≈ 1 / sin(0.823) ≈ 1 / 0.731 ≈ 1.368. Therefore, the index of refraction of the liquid is approximately 1.368.sin(critical angle) = 1 / refractive index of the liquid. Given that the critical angle is 47.2 degrees, we can calculate the refractive index (n) of the liquid as follows: sin(47.2 degrees) = 1 / n. Using a scientific calculator or trigonometric tables, we find: n = 1 / sin(47.2 degrees) ≈ 1.318 Therefore, the index of refraction of the liquid is approximately 1.318.

To learn more about critical, https://brainly.com/question/30002645

#SPJ11

The tension in the wire is approximately 9.3289 * 1[tex]0^{3}[/tex]  Newtons (N).

Let's calculate the tension in the wire step by step.

Step 1: Convert the density of copper to g/m³.

Density of copper = 8.92 g/cm³ = 8.92 * 1000 kg/m³ = 8920 kg/m³

Step 2: Calculate the cross-sectional area of the wire.

Given diameter = 1.70 mm = 1.70 * 1[tex]0^{-3}[/tex] m

Radius (r) = 0.85 * 1[tex]0^{-3}[/tex] m

Cross-sectional area (A) = π * r²

A =  π * [tex](0.85 * 10^{-3} )^2[/tex]

Step 3: Calculate the tension (T) using the wave speed equation.

Wave speed (v) = 195 m/s

T = μ * v² / A

T = (8920 kg/m³)  * [tex](195 m/s)^2[/tex]  / A

Now, substitute the value of A into the equation and calculate T

A = π * [tex](0.85 * 10^{-3} )^2[/tex]

A = 2.2684 * 1[tex]0^{-6}[/tex] m²

T = (8920 kg/m³) * [tex](195 m/s)^2[/tex] / (2.2684 * 1[tex]0^{-6}[/tex] m²)

T = 9.3289 * 1[tex]0^{3}[/tex]  N

Therefore, the tension in the wire is approximately 9.3289 * 1[tex]0^{3}[/tex] Newtons (N).

To know more about tension here

https://brainly.com/question/32457240

#SPJ4

Answer:

mass is the correct answer !!?!!! sanoenxcnq j oiin

The wavelength of visible light is in the range of 400-700 nm. Assume that a 7.0-cm-diameter, 110 w light bulb radiates all its energy as a single wavelength of visible light. To calculate the energy of the light, we must first convert the diameter of the bulb into a radius:r = d/2 = 3.5 cm.

We can then calculate the surface area of the bulb: A = πr² = π(3.5 cm)² = 38.48 cm²The radiant flux of the light bulb (power emitted) is 110 W, which means it emits 110 joules of energy per second. The energy density of the light can be found by dividing the radiant flux by the surface area: E = P/A = 110 W / 38.48 cm² = 2.86 W/cm².

Now, we can use the equation for radiant energy density to find the energy per photon: E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the light.

Solving for λ, we get:λ = hc/E = (6.626 x 10⁻³⁴ J s)(3.00 x 10⁸ m/s) / (2.86 W/cm²)(10⁴ cm²/m²) = 2.19 x 10⁻⁷ m or 219 nm.

Therefore, the wavelength of the light emitted by the bulb is 219 nm.

Learn more about radiant flux here ;

https://brainly.com/question/15655691

#SPJ11

The image formed on the photocells by the lens is inverted and real. The negative sign in the image distance indicates an inverted image, and the fact that the image is formed by the lens makes it real rather than virtual

To determine the nature of the image formed by the lens, we can use the lens formula:

1/f = 1/u + 1/v

where f is the focal length of the lens, u is the object distance, and v is the image distance.

Focal length (f) = 7.50 cm = 0.075 m

Object distance (u) = 4.30 m

We can rearrange the lens formula to solve for the image distance (v):

1/v = 1/f - 1/u

1/v = 1/0.075 - 1/4.30

1/v = 13.33 - 0.23

1/v ≈ 13.10

v ≈ 0.076 m

Since the image distance (v) is positive, it indicates that the image is formed on the same side as the object, which means it is a real image. Additionally, since the image is formed by the lens, the image is inverted.

The image formed on the photocells by the lens is inverted and real. The negative sign in the image distance indicates an inverted image, and the fact that the image is formed by the lens makes it real rather than virtual.

To know more about lens visit:

https://brainly.com/question/30995178

#SPJ11

For a flat, circular, steel loop:

a) The emf induced in the loop is given by Faraday's law of induction:

ε = -N dΦ/dt

Where:

ε = emf induced in the loop (in volts)

N = number of turns in the loop

Φ = magnetic flux through the loop (in webers)

d/dt = derivative of Φ with respect to time (in webers/second)

The magnetic flux through the loop is given by:

Φ = BA

Where:

B = magnetic field strength (in teslas)

A = area of the loop (in square meters)

The area of the loop is:

A = πr²

Where:

r = radius of the loop (in meters)

Substituting these equations into Faraday's law of induction:

ε = -N d(BA)/dt

ε = -N B dA/dt - N A dB/dt

The area of the loop is constant, so the first term on the right-hand side of the equation is zero. The second term on the right-hand side of the equation is equal to the emf induced in the loop.

Substituting the given values into the equation:

ε = [tex]-N (1.4T)e^{-(0.057s^{-1})} t[/tex]

b) The induced emf is equal to 110 of its initial value when t = ln(110) / 0.057 = 11.7 seconds.

c) The direction of the current induced in the loop is given by Lenz's law. Lenz's law states that the direction of the current induced in a loop is such that it opposes the change in the magnetic flux that produced it. In this case, the magnetic flux is decreasing, so the current will flow in a direction that will increase the magnetic flux. The direction of the current can be found using the right-hand rule. If you point your right thumb in the direction of the decreasing magnetic field, your fingers will curl in the direction of the induced current.

Therefore, the direction of the current induced in the loop is clockwise, as viewed from above the loop.

Find out more on induced emf here: https://brainly.com/question/17329842

#SPJ4

Therefore, the force when the particle's charge is tripled and electric field strength is halved will be equal to (3/4) times the original force F. That is  F" = 3F/4.

To Find: The force if the particle's charge is tripled and the electric field strength is halved, in terms of F.

 The force on a charged particle in an electric field is given by the formula:

F = qE

where q = charge on the particle ,

E = electric field strength,

F is directly proportional to the charge and electric field strength.

Thus , If the particle's charge is tripled, F will be three times its original value.

F' = 3qE

F' = 3(qE)

F' = 3F,

On the other hand, If the electric field strength is halved, F will be half its original value.

F" = (1/2)q E

F" = (1/2)(qE/2)

F" = (1/4)F

Final Formula: The force on the particle when the charge is tripled and electric field strength is halved is given by:

F" = (1/4) x 3

F = 3F/4

to know more about electric field strength visit:

https://brainly.com/question/17093047

#SPJ11

If the object is located at the focal point of a lens, the angular magnification obtained is infinite. This is known as the "limiting case" of angular magnification.

Angular magnification (M) is defined as the ratio of the angle subtended by the image (θi) to the angle subtended by the object (θo):

[tex]\begin{equation}M = \frac{\theta_i}{\theta_o}[/tex]

When the object is at the focal point of the lens, the image formed by the lens becomes "at infinity." In this case, the angle subtended by the image (θi) is also at infinity. As a result, the angular magnification becomes:

[tex]\begin{equation}M = \frac{\infty}{\theta_o} = \infty[/tex]

Therefore, when the object is at the focal point of the lens, the angular magnification obtained is infinite. This indicates that the image appears to be greatly magnified, but it is not a true representation as the image is formed at infinity.

To know more about the Angular magnification refer here :

https://brainly.com/question/31393439#

#SPJ11

The intensity of the light transmitted by the polarizer is 10 watts/m2.

According to Malus’ law, if unpolarized light of intensity I0 is incident on a linear polarizer, the intensity I of the light transmitted by the polarizer is given by; I = I0 cos2θ where θ is the angle between the polarization direction of the incident light and the polarization direction of the polarizer. If unpolarized light of intensity 20 watts/m2 is incident on a linear polarizer, then the intensity of the light transmitted by the polarizer when the angle between the polarization direction of the incident light and the polarization direction of the polarizer is 45° is;I = I0 cos2θ= 20cos245°= 10 watts/m2. Therefore, the intensity of the light transmitted by the polarizer is 10 watts/m2.

According to the law, the square of the cosine of the angle between the polarizer and the direction of the incoming light determines the intensity of the light that passes through it.

Know more about Malus’ law, here:

https://brainly.com/question/30719901

#SPJ11

a) The amount of Fe in 4.0g of leaf tissue is 0.1mg.

b) The resulting stock solution has a concentration of 2 ppm.

c) 3.75 mL of the stock solution is needed to prepare 25.0 mL of a dilute sample solution with a concentration of 0.30 ppm Fe.

a) To calculate the amount of Fe in 4.0g of leaf tissue that is 0.0025% Fe by mass:

Amount of Fe = (0.0025/100) × 4.0g = 0.0001g or 0.1mg

b) If all of the iron from the 4.0g leaf sample is diluted in a 50 mL flask, we can calculate the concentration of the resulting stock solution:

Concentration = (Amount of Fe / Volume of solution) × [tex]10^6[/tex]

Concentration = (0.0001g / 50mL) × [tex]10^6[/tex] = 2 ppm

c) To determine the volume of the stock solution needed to prepare 25.0 mL of a dilute sample solution with a concentration of 0.30 ppm Fe:

The volume of stock solution = (Concentration of dilute sample / Concentration of stock solution) × Volume of a dilute sample

Volume of stock solution = (0.30 ppm / 2 ppm) × 25.0 mL = 3.75 mL

Learn more about concentration at

https://brainly.com/question/3045247

#SPJ4

The length of rocket A as measured by the crew of rocket B is 60 meters.

Length of the object in its own rest frame = L = 100 m

The relative velocity between the two frames = V = 0.800c

In the given case, it is required to use the Lorentz transformation formula for length contraction to determine the length of rocket A as measured by the crew of rocket B. The equation is provided by:

L' = L x √(1 - (v²/c²))

L' denotes the object's length as measured in the alternate frame, in this example, by the crew of rocket B.

Substituting the values into the formula -

= 100 x √(1 - (0.800²/1²))

= 100 x √(1 - 0.64)

= 100 x √(0.36)

= 100 x 0.6

= 60

Read more about rocket on:

https://brainly.com/question/30584355

#SPJ4

The temperature of a star can be determined using Wien's displacement law, which relates the peak wavelength of its radiation to its temperature.

The formula is given as [tex]\lambda_m_a_x = b / T[/tex], where b is Wien's constant.

According to Wien's displacement law, the peak wavelength ([tex]\lambda_m_a_x[/tex]) of radiation emitted by a black body is inversely proportional to its temperature (T). The formula is given as [tex]\lambda_m_a_x = b / T[/tex], where b is Wien's constant. To determine the temperature of a star when its peak wavelength is known, we can rearrange the equation to solve for [tex]T: T = b / \lambda_m_a_x[/tex].

In this case, the peak wavelength is given as 425 nm. However, the equation requires the wavelength to be in meters, so we need to convert 425 nm to meters. Since 1 nm is equal to [tex]10^-^9[/tex] meters, the peak wavelength becomes [tex]425 * 10^-^9[/tex] meters. Plugging this value into the equation, along with Wien's constant (approximately [tex]2.898 *10^-^3 m.K[/tex]), we can calculate the temperature of the star. The resulting value will be in Kelvin, giving us an accurate measurement of the star's temperature based on its peak wavelength.

Learn more about Wien's displacement law here:

https://brainly.com/question/31780394

#SPJ11

A physics professor talking produces a sound intensity level of 55 dB. The sound intensity level is a measure of the loudness of a sound.

The sound intensity level is a logarithmic measure of the ratio of the sound intensity to a reference intensity. It is expressed in decibels (dB) and provides a relative scale for comparing different sound levels. The reference intensity commonly used is the threshold of hearing, which is approximately 1 × 10⁻¹² W/m².

In this case, the physics professor's talking produces a sound intensity level of 55 dB. This indicates that the sound produced by the professor has a certain intensity compared to the threshold of hearing. The higher the sound intensity level, the louder the sound is perceived.

It's important to note that the sound intensity level is a logarithmic scale, which means that a small increase in intensity level corresponds to a significant increase in perceived loudness. For example, an increase of 10 dB represents a tenfold increase in sound intensity.

Overall, a sound intensity level of 55 dB suggests a moderate level of loudness for the physics professor's talking.

Learn more about sound intensity level  here

https://brainly.com/question/31390731

#SPJ11

To determine the masses of the two spherical objects, we can use Newton's law of universal gravitation: F = G * (m1 * m2) / r^2

where F is the gravitational force, G is the gravitational constant (6.67430 × 10^-11 N m²/kg²), m1 and m2 are the masses of the objects, and r is the distance between their centers. In this case, the gravitational force is given as 85 N, and the distance between the centers of the objects is 36 mm = 0.036 m. Plugging in the values, we have: 85 N = (6.67430 × 10^-11 N m²/kg²) * (m1 * m2) / (0.036 m)^2. We are told that the two objects have equal masses, so we can let m1 = m2 = m. Simplifying the equation, we have: 85 N = (6.67430 × 10^-11 N m²/kg²) * (m * m) / (0.036 m)^2. Solving for m, we can rearrange the equation: m^2 = (85 N * (0.036 m)^2) / (6.67430 × 10^-11 N m²/kg²). m^2 ≈ 0.0222 kg². Taking the square root of both sides, we get: m ≈ √0.0222 kg. Calculating this expression will give us the approximate mass of each spherical object.

To learn more about masses, https://brainly.com/question/15344770

#SPJ11

The equilibrium temperature of the rod is zero degrees Celsius (0°C).

In the given heat flow model, the equilibrium temperature is reached when the temperature distribution throughout the rod remains constant over time. This implies that the rate of heat loss (kurz) is equal to the rate of heat conduction within the rod (hu). Since the rod is losing heat across the lateral boundaries, the equilibrium temperature occurs when the entire rod reaches the same temperature.

From the boundary conditions u(0,t) = u(L,t) = 0, we can deduce that the temperature at both ends of the rod is zero. This indicates that the equilibrium temperature is zero degrees Celsius.

Therefore, the equilibrium temperature of the rod is zero degrees Celsius (0°C).

Learn more about  equilibrium temperature: https://brainly.com/question/24140439

#SPJ11

The functional dependence on the `therapycode` in the `therapies` table can be diagrammed using an entity-relationship diagram (ERD) or a dependency diagram.

In an ERD, the `therapies` table would be represented as an entity, with attributes such as `therapycode`, `therapyname`, and any other relevant information. The `therapycode` attribute would be underlined or marked as the primary key, indicating its uniqueness in identifying each therapy record.

To represent the functional dependence, an arrow or line can be drawn from the `therapycode` attribute to any other attribute in the `therapies` table that is functionally dependent on it. For example, if there is an attribute called `therapydescription` that is determined by the `therapycode`, an arrow would be drawn from `therapycode` to `therapydescription` to indicate the functional dependence.

In the explanation, you can provide more details about the purpose and significance of the functional dependence diagram in the context of the `therapies` table. You can mention that the diagram helps visualize the relationships between the attributes and understand how changes in the `therapycode` value may impact other attributes. Additionally, you can explain that this diagram aids in database design, normalization, and query optimization by identifying and organizing functional dependencies accurately.

To learn more about entity-relationship refer:

https://brainly.com/question/17063244

#SPJ11

1.66 × [tex]10^{27}[/tex] molecules of air are needed to fill the auditorium at one atmosphere and 0°C.

To calculate the number of air molecules needed to fill the auditorium at one atmosphere and 0°C, we can use the ideal gas law. The ideal gas law equation is given as

PV = nRT

Where:

P is the pressure of the gas (in this case, one atmosphere)

V is the volume of the gas (6 × [tex]10^{3} m^{3}[/tex])

n is the number of moles of gas

R is the ideal gas constant (8.314 J/(mol·K))

T is the temperature of the gas (in this case, 0°C or 273 K)

We can rearrange the ideal gas law equation to solve for the number of moles (n)

n = (PV) / (RT)

Substituting the values into the equation

n = (1 atm * 6 × [tex]10^{3} m^{3}[/tex]) / (8.314 J/(mol·K) * 273 K)

n = 2759.7 mol

Since one mole of any gas contains Avogadro's number (approximately 6.022 × [tex]10^{23}[/tex]) of molecules, we can calculate the number of air molecules in the auditorium

Number of molecules = n * Avogadro's number

Number of molecules = 2759.7 mol * 6.022 × [tex]10^{23}[/tex] molecules/mol

Number of molecules = 1.66 × [tex]10^{27}[/tex]  molecules

Therefore, approximately 1.66 × [tex]10^{27}[/tex] molecules of air are needed to fill the auditorium at one atmosphere and 0°C.

To know more about molecules here

https://brainly.com/question/30337427

#SPJ4

Answer:

Explanation: I kinda think soo

The work done by the applied force is zero since the sled is moving at a constant velocity. The work done by friction can be calculated using the equation W = Fd, where F is the frictional force and d is the distance.

The total work is the sum of the work done by the applied force and the work done by friction.

(a) The work done by the applied force is zero because the sled is moving at a constant velocity. When an object moves at a constant velocity, the net force acting on it is zero. In this case, the applied force is balanced by the force of friction, resulting in no net work being done.

(b) The work done by friction can be calculated using the equation W = Fd, where F is the frictional force and d is the distance traveled. The frictional force can be determined by multiplying the coefficient of friction (μ) by the normal force (Fn).

The normal force is equal to the weight of the sled and passenger, which is given by Fn = mg, where m is the mass (50 kg) and g is the acceleration due to gravity (9.8 m/s^2). The frictional force can then be calculated as F = μFn. The work done by friction is then W = Fd.

(c) The total work is the sum of the work done by the applied force and the work done by friction. Since the work done by the applied force is zero, the total work is equal to the work done by friction. Therefore, the total work is W = Fd, where F is the frictional force and d is the distance traveled.

Learn more about coefficient of friction here

https://brainly.com/question/29281540

#SPJ11

At a temperature of 30.0°C and pressure of 1.20 atm, the helium balloon's volume is approximately 3.67 L. This is determined using the combined gas law equation, considering the initial conditions of 22.0°C, 1.14 atm, and 3.50 L.

To solve this problem, we can use the combined gas law, which relates the initial and final conditions of temperature, pressure, and volume. The combined gas law equation is as follows:

(P₁ * V₁) / (T₁) = (P₂ * V₂) / (T₂)

Where:

P₁ = Initial pressure = 1.14 atm

V₁ = Initial volume = 3.50 L

T₁ = Initial temperature = 22.0°C + 273.15 (converted to Kelvin)

P₂ = Final pressure = 1.20 atm

V₂ = Final volume (to be determined)

T₂ = Final temperature = 30.0°C + 273.15 (converted to Kelvin)

Plugging in the given values, we can rearrange the equation to solve for V₂:

V₂ = (P₁ * V₁ * T₂) / (P₂ * T₁)

Substituting the values, we have:

V₂ = (1.14 atm * 3.50 L * (30.0°C + 273.15 K)) / (1.20 atm * (22.0°C + 273.15 K))

Simplifying this expression, we find:

V₂ ≈ 3.67 L

Therefore, the volume of the helium balloon at 30.0°C and 1.20 atm is approximately 3.67 L.

To know more about pressure, refer here:

https://brainly.com/question/30673967#

#SPJ4

You have a circuit of four 4.5 v d-cell batteries in series, some wires, and a light bulb, the bulb is lit and the current flowing through the bulb is depends on its resistance.

When four 4.5 V D-cell batteries are connected in series, the total voltage is 18 V. This voltage pushes the current through the light bulb, causing it to light up. The exact amount of current that flows through the bulb depends on its resistance. However, the current flowing through the bulb can be calculated using Ohm's Law.

Ohm's Law states that the current through a conductor between two points is directly proportional to the voltage across the two points. The constant of proportionality is the resistance of the conductor, this means that I = V / R, where I is the current, V is the voltage, and R is the resistance. In this case, since the bulb is lit, we know that there is current flowing through it. However, without knowing the resistance of the bulb, we cannot calculate the exact value of the current. So therefore the bulb is lit and the current flowing through the bulb is depends on its resistance.

To know more about Ohm's Law visit:

https://brainly.com/question/12372387

#SPJ11

The given statement "swinging a tennis racket against a ball is an example of a third-class lever" is TRUE.

A third-class lever is a class of lever where the input force is located between the fulcrum and the load. The fulcrum is the pivot point of the lever. The load is the weight or resistance that is being moved, lifted, or carried.The following are some examples of third-class levers: Sweeping with a broom. Tennis racket. Field hockey stick. Butter knife, etc. Thus, we can say that swinging a tennis racket against a ball is an example of a third-class lever.

To know more about tennis racket visit:

https://brainly.com/question/11490587

#SPJ11

The name of the void spaces left behind in the rock due to the degassing of the lava is Vesicles. The correct option is option B.

When lava erupts from a volcano, it contains dissolved gases, such as water vapor and carbon dioxide. As the lava reaches the Earth's surface, the decrease in pressure causes these gases to rapidly expand and escape from the lava. This process forms void spaces or cavities within the solidified rock.

These void spaces, known as vesicles, are typically small and can vary in size. They are commonly observed in volcanic rocks, such as basalt or pumice. Vesicles often give the rock a porous or spongy appearance.

Other options mentioned:

Sediment (option C): Sediment refers to particles of solid material that are transported and deposited by various geological processes, but it is not directly related to void spaces in rocks due to degassing of lava.

Matrix (option D): Matrix refers to the material that fills the space between larger grains or crystals in a rock, but it does not specifically describe the void spaces left by degassing.

Groundmass (option E): Groundmass refers to the fine-grained material that surrounds larger crystals or phenocrysts in igneous rock, and it does not pertain to the void spaces.

Phenocryst (option A): Phenocryst refers to the large crystals embedded within a finer-grained matrix or groundmass in an igneous rock. While phenocrysts may be present in volcanic rocks, they are not directly related to the void spaces resulting from degassing of lava.

To learn more about Vesicles click here

https://brainly.com/question/1743302

#SPJ11

The radius of the satellite's orbit is approximately 3039 kilometers.

The time taken for one complete orbit is the period of the satellite's orbit. In this case, the period is two days or 48 hours.

The formula for the period of a satellite's orbit is:

T = 2π√(r³/GM)

Where:

T is the period of the orbit

r is the radius of the orbit

G is the gravitational constant (approximately 6.674 × 10^-11 m³/(kg·s²))

M is the mass of the Earth (approximately 5.972 × 10^24 kg)

In this case:

T = 48 hours = 48 × 3600 seconds (converting to seconds)

G = 6.674 × 10^-11 m³/(kg·s²)

M = 5.972 × 10^24 kg

Substituting the values into the formula, we have:

48 × 3600 = 2π√(r³ / (6.674 × 10^-11 × 5.972 × 10^24))

172,800 = 2π√(r³ / (6.674 × 5.972))

27,600 = √(r³ / (6.674 × 5.972))

r³ / (6.674 × 5.972) = (27,600)²

r³ = (27,600)² × (6.674 × 5.972)

Taking the cube root of both sides to solve for r, we get:

r ≈ ∛((27,600)² × (6.674 × 5.972))

r ≈ ∛(762,048,000 × 39.784)

r ≈ ∛(30,412,577,920)

r ≈ 3039 km (approximately)

Learn more about satellite's orbit here:

https://brainly.com/question/28106901

#SPJ11

a. The angular velocity at time t = 2.70s is 2.2315 rad/s.

b. The wheel has turned an angle of 4.5042 radians between time t = 0 and time t = 2.70s.

a) To determine the angular velocity at time t = 2.70s, we can use the equation:

ωf = ωi + αt

Given:

Initial angular velocity ωi = 1.30 rad/s

Angular acceleration α = 0.345 rad/s²

Time t = 2.70 s

Substituting the values into the equation, we have:

ωf = 1.30 rad/s + (0.345 rad/s²) × (2.70 s)

ωf = 1.30 rad/s + 0.9315 rad/s

ωf = 2.2315 rad/s

b) To find the angle turned by the wheel between time t = 0 and time t = 2.70s, we can use the equation:

θ = ωit + (1/2)αt²

Given:

Initial angular velocity ωi = 1.30 rad/s

Angular acceleration α = 0.345 rad/s²

Time t = 2.70 s

Substituting the values into the equation, we have:

θ = (1.30 rad/s) × (2.70 s) + (1/2) × (0.345 rad/s²) × (2.70 s)²

θ = 3.51 rad + 0.9942 rad

θ = 4.5042 rad

To know more about angular velocity, here

brainly.com/question/30237820

#SPJ4

The expression for the cart's position as a function of time is:

x(t) = 10 * cos(2π * 5.0t + π)

What is time?

Time is a fundamental concept in physics and is used to measure the duration or sequence of events. Time is often measured in units such as seconds, minutes, hours, days, months, and years.

The position (x) of the cart undergoing simple harmonic motion can be expressed as a function of time (t) using the equation:

x(t) = A * cos(2πft + φ)

where:

x(t) is the position of the cart at time t,

A is the amplitude of the motion,

f is the frequency of the motion,

π is the mathematical constant pi (approximately 3.14), and

φ is the phase angle.

In this case, the given amplitude is A = 10 cm and the frequency is f = 5.0 Hz. We are also given that the cart is at x = -A when t = 0. This information allows us to determine the phase angle.

Since the cart is at x = -A when t = 0, we substitute these values into the equation and solve for the phase angle:

-10 = 10 * cos(2π * 5.0 * 0 + φ)

-1 = cos(φ)

From the equation, we can see that the cosine function is equal to -1 when the phase angle is φ = π.

Therefore, the expression for the cart's position as a function of time is:

x(t) = 10 * cos(2π * 5.0t + π)

To learn more about time,

https://brainly.com/question/26046491

#SPJ4