what is the density of nitrogen gas at 1.98 atm and 74.5 ∘ c 1.98 atm and 74.5∘c ?

The two reactions are: Conversion of aldose to ketose and Conversion of  ketose to aldose and phosphohexose isomerase and triose phosphate isomerase are enzymes catalyze those two reactions

Conversion of glucose-6-phosphate (an aldose) to fructose-6-phosphate (a ketose) by the enzyme glucose-6-phosphate isomerase (also known as phosphohexose isomerase).

Conversion of dihydroxyacetone phosphate (a ketose) to glyceraldehyde-3-phosphate (an aldose) by the enzyme triose phosphate isomerase.

These isomerization reactions are important in glycolysis because they allow the intermediates of the pathway to be interconverted and used in subsequent reactions, leading to the production of ATP and other metabolic intermediates.

Know more about glycolysis here:

https://brainly.com/question/14076989

#SPJ11

The reason why [tex]H_{2} SO_{4}[/tex] is a stronger acid than [tex]H_{2} SO_{3}[/tex] is due to the presence of more oxygen atoms in its structure. This is because oxygen has a higher electronegativity than sulfur, meaning that it attracts electrons more strongly. The correct option is c.

As a result, the oxygen atoms in [tex]H_{2} SO_{4}[/tex] can more effectively pull electrons away from the hydrogen atom that is bonded to them, weakening the H-O bond and making it more likely to dissociate and release H+ ions.

Furthermore, the extra oxygen atom in [tex]H_{2} SO_{4}[/tex] can also donate electrons to the H-O bond, further destabilizing it and making it easier to break. This donation of electrons is due to the lone pairs of electrons present on the oxygen atom, which can interact with the positively charged hydrogen ion and facilitate its release.

On the other hand, [tex]H_{2} SO_{3}[/tex] has fewer oxygen atoms in its structure and hence a weaker ability to attract and donate electrons. As a result, the H-O bond in [tex]H_{2} SO_{3}[/tex] is stronger and less likely to dissociate, making it a weaker acid than [tex]H_{2} SO_{4}[/tex].

Additionally, the extra oxygen atom in [tex]H_{2} SO_{4}[/tex] does not affect the length of the H-S bond, as this bond is not directly affected by the presence of oxygen. Therefore, options b and d are incorrect.

In summary, the stronger acid strength of [tex]H_{2} SO_{4}[/tex] compared to [tex]H_{2} SO_{3}[/tex] is due to the extra oxygen atoms in its structure, which enhance the electronegativity and electron-donating ability of the molecule, leading to a weaker H-O bond and easier dissociation of H+ ions.

Here you can learn more about electronegativity

https://brainly.com/question/17762711#

#SPJ11  

Soluble salts in water: Ba(NO₃)₂,  Na₂SO₄, NaNO₃, Al₂(SO₄)₃ and insoluble salts are:  MgCO₃, Ca₃(PO₄)₂, AgBr, Ag₂SO₄.

To determine whether each salt is generally classified as soluble or insoluble in water, consider the following guidelines:

1. Most nitrate (NO₃⁻) and alkali metal (Group 1) salts are soluble.
2. Most sulfate (SO₄²⁻) salts are soluble, with some exceptions.
3. Most carbonate (CO₃²⁻), phosphate (PO₄³⁻), and hydroxide (OH⁻) salts are insoluble, with some exceptions.
4. Most chloride (Cl⁻), bromide (Br⁻), and iodide (I⁻) salts are soluble, with some exceptions.

Based on these guidelines:

MgCO₃ = Insoluble (carbonate)
Ba(NO₃)₂ = Soluble (nitrate)
Ca₃(PO₄)₂ = Insoluble (phosphate)
AgBr = Insoluble (exception to halides)
Ag₂SO₄ = Insoluble (exception to sulfates)
Na₂SO₄ = Soluble (sulfate)
NaNO₃ = Soluble (nitrate)
Al₂(SO₄)₃ = Soluble (sulfate)

Know more about Salts here:

https://brainly.com/question/14467184

#SPJ11

Ammonium ion (NH4+) and Phosphate ion (PO4^3-) are the spectators ions.

In the given chemical equation, 2(NH4)3PO4 + 3BaS → 3(NH4)2S + Ba3(PO4)2, the spectator ions are those that appear in both the reactants and products of the reaction, but do not undergo any chemical change. In this case, the ammonium ion (NH4+) and phosphate ion (PO43-) are spectator ions. They appear in both the reactant (NH4)3PO4 and product NH4)2S and Ba3(PO4)2 respectively.

However, the phosphide ion (P3-), phosphite ion (PO33-), sulfate ion (SO42-), sulfite ion (SO32-), and beryllium ion (Be2+) are the ions involved in the chemical reaction. These ions react with each other and result in the formation of new compounds.

It is essential to identify the spectator ions in a chemical equation to determine the actual reactants and products involved in the reaction. This information is crucial in determining the stoichiometry of the reaction and calculating the amount of product formed or reactant consumed, Thus, identifying the spectator ions helps in the accurate representation of the chemical reaction and its various aspects.

Know more about Stoichiometry here:

https://brainly.com/question/22288091

#SPJ11

The standard cell potential for the reaction is 0.315 V.

To calculate the standard cell potential (E°cell) for the given reaction, we can use the following equation:

E°cell = -ΔG° / (n * F)

Where:
- ΔG° is the standard Gibbs free energy change (-60.73 kJ/mol)
- n is the number of moles of electrons transferred in the reaction
- F is the Faraday constant (96,485 C/mol)

First, we need to determine the number of moles of electrons transferred (n) in the reaction. To do this, we look at the balanced half-reactions:

Fe²⁺(aq) + 2e⁻ → Fe(s)  [Reduction]
Zn(s) → Zn²⁺(aq) + 2e⁻   [Oxidation]

In both half-reactions, there are 2 moles of electrons transferred. So, n = 2.

Now, we can plug the values into the equation:

E°cell = -(-60.73 kJ/mol) / (2 * 96,485 C/mol)
E°cell = 60.73 kJ/mol / (2 * 96,485 C/mol)

Note that we need to convert kJ to J:

E°cell = 60,730 J/mol / (2 * 96,485 C/mol)

Now, solve for E°cell:

E°cell = 0.315 V

To know more about cell potential here:

https://brainly.com/question/29653954#

#SPJ11

The cell potential for the given galvanic cell is +0.401 V.

The cell potential for the given galvanic cell. Here's a step-by-step explanation:

1. Identify the half-reactions: In the given galvanic cell, the half-reactions are:
  - Anode (oxidation): H2(g) → 2H+(aq) + 2e-
  - Cathode (reduction): O2(g) + 2H2O(l) + 4e- → 4OH-(aq)

2. Determine the standard reduction potentials (E°): You can find the standard reduction potentials for the half-reactions in a standard reduction potential table. For the given reactions, we have:
  - E°(H2/H+) = 0 V (as it is the reference value)
  - E°(O2/OH-) = +0.401 V

3. Calculate the cell potential (Ecell): To calculate the cell potential, use the equation Ecell = E°cathode - E°anode. In this case, it would be:

  Ecell = E°(O2/OH-) - E°(H2/H+) = +0.401 V - 0 V = +0.401 V

Therefore, the cell potential for the given galvanic cell is +0.401 V.

Know more about Galvanic Cell here:

https://brainly.com/question/13031093

#SPJ11

The solubility product expression for iron(II) hydroxide, Fe(OH)2, is:

Ksp = [Fe2+][OH-]^2 = 4.87×10^-17

Let's assume that the initial concentration of Fe2+ and OH- ions in pure water is x M. Then, the equilibrium concentration of Fe2+ and OH- ions will also be x M.

Therefore, the solubility product expression becomes:

Ksp = x * (2x)^2 = 4x^3

Solving for x:

4x^3 = 4.87×10^-17

x^3 = 1.2175×10^-17

x = (1.2175×10^-17)^(1/3)

x = 2.312×10^-6 M

The solubility of Fe(OH)2 is equal to the concentration of Fe2+ ions, which is x.

To convert this to grams per 100.0 ml of solution, we need to multiply by the molar mass of Fe(OH)2 and the volume of the solution:

solubility = x * molar mass * 100 / volume

Assuming the molar mass of Fe(OH)2 is 89.86 g/mol and the volume of the solution is 100.0 ml, we get:

solubility = (2.312×10^-6 M) * (89.86 g/mol) * 100 / 100.0 ml

solubility = 0.00208 g/100.0 ml

Therefore, the solubility of iron(II) hydroxide in pure water is 0.00208 g/100.0 ml of solution.

*IG:whis.sama_ent*

To make 17 kg of chlorine, around 7.0031 kg of sodium chloride will be required.

Sodium chloride (NaCl) is generally electrolyzed to produce chlorine in a procedure known as chloralkali electrolysis.

The Chemical Equation for this reaction is:

2 NaCl + 2 H₂O → 2 NaOH + Cl₂ + H₂

According to this equation, 1 mole of Cl₂ is created for every 2 moles of NaCl.

NaCl has a molar mass of roughly 58.44 g/mol, while Cl₂ has a molar mass of roughly 70.90 g/mol.

We must first determine the number of moles of Cl₂ created in order to determine the quantity of NaCl necessary to make 17 kg of Cl₂:

Number of moles of Cl₂ = (17 kg) / (70.90 g/mol) = 240.03 mol

We just require half as many moles of NaCl since 1 mole of Cl₂ is created from 2 moles of NaCl:

Number of moles of NaCl = 1/2 × 240.03 mol = 120.015 mol

Finally, we can determine the necessary mass of NaCl:

Mass of NaCl = (120.015 mol) × (58.44 g/mol) = 7,003.1 g = 7.0031 kg

In order to make 17 kg of chlorine, roughly 7.0031 kg of sodium chloride will be required.

To learn more about Stoichiometry:

https://brainly.com/question/14935523

When a gas expands isothermally, its temperature remains constant throughout the process. Therefore, the change in entropy can be calculated using the equation:

ΔS = nRln(V₂/V₁)

where ΔS is the change in entropy, n is the number of moles of gas, R is the gas constant, V₁ is the initial volume, and V₂ is the final volume.

(a) Reversibly expanding the methane gas at 260 K and 105 kPa until its pressure is 1.50 kPa, we can use the ideal gas law to calculate the initial volume:

PV = nRT

V₁ = (nRT)/P₁ = (15 g)/(16.043 g/mol) x (0.08206 L·atm/(mol·K)) x 260 K/105 kPa = 0.286 L

Similarly, we can calculate the final volume:

V₂ = (nRT)/P₂ = (15 g)/(16.043 g/mol) x (0.08206 L·atm/(mol·K)) x 260 K/1.50 kPa = 5.00 L

Substituting these values into the entropy equation, we get:

ΔS = (15 g)/(16.043 g/mol) x (0.08206 L·atm/(mol·K)) x ln(5.00 L/0.286 L) = 25.1 J/K

Therefore, the change in entropy of the methane gas when it isothermally and reversibly expands from 105 kPa to 1.50 kPa is 25.1 J/K.

(b) Irreversibly expanding the methane gas until its pressure is 1.50 kPa, we cannot use the same equation as in part (a) because the process is not reversible. Instead, we need to use the equation:

ΔS = q/T

where q is the heat transferred and T is the temperature.

Since the expansion is irreversible, the heat transferred is not equal to the work done on or by the gas. However, we can use the fact that the internal energy of an ideal gas depends only on its temperature to write:

ΔU = 0 = q - w

where ΔU is the change in internal energy and w is the work done on or by the gas. Since the expansion is isothermally and the temperature remains constant, we can write:

w = nRTln(V₂/V₁) = -q

Therefore, the heat transferred can be calculated as:

q = -nRTln(V₂/V₁)

Substituting this into the entropy equation, we get:

ΔS = -(15 g)/(16.043 g/mol) x (0.08206 L·atm/(mol·K)) x ln(5.00 L/0.286 L) / 260 K = 22.1 J/K

Therefore, the change in entropy of the methane gas when it isothermally and irreversibly expands from 105 kPa to 1.50 kPa is 22.1 J/K.

Learn more about internal energy here:

https://brainly.com/question/11742607

#SPJ11

The rate law for this reaction is derived from the rate equation, which is defined as the rate of reaction divided by the concentrations of the reactants. The rate law for this reaction is typically written as rate = k[OH⁻][CH₃Br], where k is the rate constant.

This means that the rate of this reaction is directly proportional to the concentrations of OH⁻ and CH₃Br. This indicates that the reaction rate increases as the concentrations of the reactants increase.

The rate law describes how the rate of a reaction changes with respect to changes in the concentrations of the reactants. It is determined by experimentally measuring the rate of the reaction at various concentrations of the reactants.

This rate law describes the rate of the reaction when the concentrations of the reactants are varied while all other factors, such as temperature and pressure, remain constant.

know more about reactants here

https://brainly.com/question/17096236#

#SPJ11

A. The answer is 4.9 % (2 sig figs). This gives us 0.115 mol of KCl and 0.0938 mol of H₂O.

B. The answer to this question is 4.9 % (2 sig figs). This gives us 0.068 mol of sugar and 0.0938 mol of tea.

It is calculated by adding together the atomic masses of all the atoms in the substance. The molar mass of a substance is an important factor for understanding its properties and behavior.

Part A: 22 g of KCl and 200 g of H₂O.

The answer to this question is 4.9 % (2 sig figs). This can be calculated by first converting the given masses of KCl and H₂O into moles, using their respective molar masses.

This gives us 0.115 mol of KCl and 0.0938 mol of H₂O.

We can then calculate the mass percent of KCl in the solution by dividing the mass of KCl by the total mass of the solution and multiplying by 100. This gives us 4.9 % (2 sig figs) of KCl in the solution.

Part B: 11 g of sugar in 225 g of tea with sugar (solution).

The answer to this question is 4.9 % (2 sig figs). This can be calculated by first converting the given masses of sugar and tea into moles, using their respective molar masses.

This gives us 0.068 mol of sugar and 0.0938 mol of tea.

We can then calculate the mass percent of sugar in the solution by dividing the mass of sugar by the total mass of the solution and multiplying by 100.

This gives us 4.9

For more questions related to atomic masses

https://brainly.com/question/30390726

#SPJ1

A. The answer is 4.9 % (2 sig figs). This gives us 0.115 mol of KCl and 0.0938 mol of H₂O.

B. The answer to this question is 4.9 % (2 sig figs). This gives us 0.068 mol of sugar and 0.0938 mol of tea.

It is calculated by adding together the atomic masses of all the atoms in the substance. The molar mass of a substance is an important factor for understanding its properties and behavior.

Part A: 22 g of KCl and 200 g of H₂O.

The answer to this question is 4.9 % (2 sig figs). This can be calculated by first converting the given masses of KCl and H₂O into moles, using their respective molar masses.

This gives us 0.115 mol of KCl and 0.0938 mol of H₂O.

We can then calculate the mass percent of KCl in the solution by dividing the mass of KCl by the total mass of the solution and multiplying by 100. This gives us 4.9 % (2 sig figs) of KCl in the solution.

Part B: 11 g of sugar in 225 g of tea with sugar (solution).

The answer to this question is 4.9 % (2 sig figs). This can be calculated by first converting the given masses of sugar and tea into moles, using their respective molar masses.

This gives us 0.068 mol of sugar and 0.0938 mol of tea.

We can then calculate the mass percent of sugar in the solution by dividing the mass of sugar by the total mass of the solution and multiplying by 100.

This gives us 4.9

For more questions related to atomic masses

https://brainly.com/question/30390726

#SPJ1

We first need to take into account the reduction potential of Ni2+ vs. SHE, which is -0.257 V, in order to get the minimal (least negative) cathode potential (against SHE) required to start electroplating nickel from 0.250 M Ni2+ onto a piece of iron.

The Ni2+ ions will start to be decreased at the cathode at this voltage. As a result, in order to start electroplating nickel from 0.250 M Ni2+ onto a piece of iron, the minimum cathode potential (against SHE) required is -0.257 V.

On an iron electrode, the overpotential for Ni2+ reduction is thought to be insignificant. This indicates that to start electroplating nickel from 0.250, the cathode potential (against SHE) needs to be no more negative than -0.257 V.

Learn more about  cathode potential at:

https://brainly.com/question/32247139

#SPJ12

We first need to take into account the reduction potential of Ni2+ vs. SHE, which is -0.257 V, in order to get the minimal (least negative) cathode potential (against SHE) required to start electroplating nickel from 0.250 M Ni2+ onto a piece of iron.

The Ni2+ ions will start to be decreased at the cathode at this voltage. As a result, in order to start electroplating nickel from 0.250 M Ni2+ onto a piece of iron, the minimum cathode potential (against SHE) required is -0.257 V.

On an iron electrode, the overpotential for Ni2+ reduction is thought to be insignificant. This indicates that to start electroplating nickel from 0.250, the cathode potential (against SHE) needs to be no more negative than -0.257 V.

Learn more about  cathode potential at:

https://brainly.com/question/32247139

#SPJ12

Gasoline; float,  Water; float, Honey; neither sink nor float (suspended) and Titanium; sink.

To determine whether each substance will sink or float in corn syrup, we need to compare the density of each substance with the density of corn syrup, which is 1.36 g/cm³. If the density of a substance is greater than the density of corn syrup, it will sink. If the density of a substance is less than the density of corn syrup, it will float.

Gasoline has a density of about 0.68 g/cm³, which is less than the density of corn syrup. Therefore, gasoline will float in corn syrup.

Water has a density of 1 g/cm³, which is less than the density of corn syrup. Therefore, water will float in the corn syrup.

Honey has a density of about 1.36 g/cm³, which is equal to the density of corn syrup. Therefore, honey will neither sink nor float in corn syrup. It will stay suspended in middle.

Titanium has a density of about 4.51 g/cm³, which is greater than the density of corn syrup. Therefore, titanium will sink in corn syrup.

To know more about density here

https://brainly.com/question/29775886

#SPJ1

The pH of the resulting solution if 25.00 ml of 0.10 m acetic acid is added to 10.00 ml of 0.10 m NaOH is 5.80.

To solve this problem, we need to use the equation for the acid-base reaction between acetic acid and sodium hydroxide:

CH₃CO₂H + NaOH → CH₃CO₂Na + H₂O

First, we need to calculate the number of moles of acetic acid and sodium hydroxide:

n(acetic acid) = V(acetic acid) x C(acetic acid) = 25.00 mL x 0.10 mol/L = 0.00250 mol
n(sodium hydroxide) = V(sodium hydroxide) x C(sodium hydroxide) = 10.00 mL x 0.10 mol/L = 0.00100 mol

Next, we need to determine the limiting reagent. Since the stoichiometric ratio of acetic acid to sodium hydroxide is 1:1, we can see that sodium hydroxide is the limiting reagent because there are fewer moles of it.

The reaction between sodium hydroxide and acetic acid will produce sodium acetate and water. We can calculate the number of moles of sodium acetate produced using the balanced equation:

n(sodium acetate) = n(sodium hydroxide) = 0.00100 mol

Now, we need to calculate the concentration of acetic acid and acetate ion in the final solution. Since the volumes are additive, the total volume of the solution is:

V(total) = V(acetic acid) + V(sodium hydroxide) = 25.00 mL + 10.00 mL = 35.00 mL = 0.035 L

The concentration of acetate ion is equal to the moles of acetate ion divided by the total volume of the solution:

C(acetate ion) = n(sodium acetate) / V(total) = 0.00100 mol / 0.035 L = 0.0286 mol/L

Finally, we can calculate the pH of the resulting solution using the Ka expression for acetic acid:

Ka = [H⁺][CH₃CO₂⁻]/[CH₃CO₂H]

[H⁺] = Ka x [CH₃CO₂H] / [CH₃CO₂⁻]
[H⁺] = [tex](1.8 * 10^{-5})[/tex] x (0.00250 mol/L) / (0.0286 mol/L)
[H⁺] = [tex]1.57 * 10^{-6} M[/tex]

pH = -log[H⁺]
pH = [tex]-log(1.57 * 10^{-6})[/tex]
pH = 5.80

Therefore, the pH of the resulting solution is 5.80.

To know more about pH, refer to the link below:

https://brainly.com/question/16639754#

#SPJ11

The HBr solution with a concentration of 0.72 M would be considered concentrated.

The balanced chemical equation for the neutralization reaction between HBr and LiOH is:

HBr + LiOH → LiBr + H2O

According to the equation, 1 mole of HBr reacts with 1 mole of LiOH to produce 1 mole of water.

Using the given volume and concentration of LiOH, we can calculate the number of moles of LiOH used:

moles of LiOH = M x V = 1.0 M x 0.018 L = 0.018 moles

Since the reaction is 1:1 between HBr and LiOH, the number of moles of HBr present in the 25 mL solution is also 0.018 moles.

Using the equation MAVA= MBVB, we can solve for the concentration of the HBr solution:

MA = (MB x VB) / VA = (1.0 M x 0.018 L) / 0.025 L = 0.72 M

Therefore, the concentration of the HBr solution is 0.72 M.

To determine if the solution is concentrated or dilute, we need to compare its concentration to the typical range of concentrations for acid solutions.

Acid solutions with concentrations less than 0.1 M are considered dilute, while those with concentrations greater than 1.0 M are considered concentrated.

learn more about moles here:

https://brainly.com/question/28239680

#SPJ11

The HBr solution with a concentration of 0.72 M would be considered concentrated.

The balanced chemical equation for the neutralization reaction between HBr and LiOH is:

HBr + LiOH → LiBr + H2O

According to the equation, 1 mole of HBr reacts with 1 mole of LiOH to produce 1 mole of water.

Using the given volume and concentration of LiOH, we can calculate the number of moles of LiOH used:

moles of LiOH = M x V = 1.0 M x 0.018 L = 0.018 moles

Since the reaction is 1:1 between HBr and LiOH, the number of moles of HBr present in the 25 mL solution is also 0.018 moles.

Using the equation MAVA= MBVB, we can solve for the concentration of the HBr solution:

MA = (MB x VB) / VA = (1.0 M x 0.018 L) / 0.025 L = 0.72 M

Therefore, the concentration of the HBr solution is 0.72 M.

To determine if the solution is concentrated or dilute, we need to compare its concentration to the typical range of concentrations for acid solutions.

Acid solutions with concentrations less than 0.1 M are considered dilute, while those with concentrations greater than 1.0 M are considered concentrated.

learn more about moles here:

https://brainly.com/question/28239680

#SPJ11

The reason why HC≡CH (acetylene) is more acidic than CH3CH3 (ethane) is due to the difference in hybridization of the carbon atoms and the resulting stability of the conjugate bases formed upon deprotonation. In HC≡CH, the carbon atom is sp-hybridized, while in CH3CH3, the carbon atom is sp3-hybridized.

When a proton is removed from HC≡CH, the resulting conjugate base is a negatively charged acetylide ion (C≡C-), in which the negative charge is delocalized over the two sp-hybridized carbon atoms. This delocalization of the negative charge leads to a more stable conjugate base, making it easier for the molecule to lose a proton and act as an acid.

On the other hand, when a proton is removed from CH3CH3, the resulting conjugate base is a negatively charged ethyl anion (CH3CH2-), with the negative charge localized on a single sp3-hybridized carbon atom. This conjugate base is less stable than the acetylide ion due to the lack of delocalization, making it harder for ethane to lose a proton and act as an acid.

Thus, even though the C-H bond in HC≡CH has a higher bond dissociation energy than the C-H bond in CH3CH3, HC≡CH is more acidic because its conjugate base is more stable due to the delocalization of the negative charge over the sp-hybridized carbon atoms.

To know more about conjugate bases click here:

https://brainly.com/question/12883745

#SPJ11

Here are some procedures that scientists can follow to gather more evidence about whether samples are the same substance or not: Conduct a chemical analysis, Conduct a spectroscopic analysis, Conduct a crystallographic analysis, Conduct a density analysis

Conduct a chemical analysis: If the samples have the same composition, then they are likely to be the same substance.

Conduct a spectroscopic analysis: If the spectral signatures are the same, then the samples are likely to be the same substance.

Conduct a crystallographic analysis: If the crystal structures are the same, then the samples are likely to be the same substance.

Conduct a density analysis: If the densities are the same, then the samples are likely to be the same substance.

To know more about spectral signatures, here

brainly.com/question/22636286

#SPJ1

The limiting reagent is Nitric acid (Option C)

To determine the limiting reagent, we need to calculate the number of moles of each reactant and compare their mole ratios with the balanced equation.

The balanced equation for the nitration of methyl benzoate is:

C₆H₅COOCH₃ + HNO₃ → C₆H₄(NO₂)COOCH₃ + H₂O

The molar mass of methyl benzoate (C₆H₅COOCH₃) is:

Methyl benzoate = 151.16 g/mol

Number of moles of methyl benzoate used:

n = m/M = 247 g / 151.16 g/mol = 1.635 mol

The density of concentrated nitric acid is 1.42 g/mL, and its molar mass is 63.01 g/mol. Therefore, 2.2 mL of concentrated nitric acid is equal to:

m = V x ρ = 2.2 mL x 1.42 g/mL = 3.124 g

Number of moles of nitric acid used:

n = m/M = 3.124 g / 63.01 g/mol = 0.0495 mol

Using the balanced equation, the mole ratio between methyl benzoate and nitric acid is 1:1. Therefore, the limiting reagent is nitric acid since it is present in a lower amount than the amount required for the reaction to occur completely.

Answer: C. Nitric acid is the limiting reagent.

Learn more about Limiting reagent

brainly.com/question/26905271

#SPJ11

The given equation is not balanced. The properly balanced equation is:

HIO + H₂O + 2I- → IO₃⁻ + 4H+ + I₂

To balance the equation using the method of half-reactions, we first need to separate the reaction into two half-reactions: the oxidation half-reaction and the reduction half-reaction.

Oxidation half-reaction:

2I- → I₂

Reduction half-reaction:

HIO + H₂O → IO₃- + 4H⁺ + 3e⁻

We can balance the oxidation half-reaction by adding two electrons to the left side:

2I- + 2e⁻ → I₂

Next, we can balance the reduction half-reaction by multiplying the oxidation half-reaction by 3 and adding it to the reduction half-reaction:

3HIO + 3H₂O + 6I- → 3IO³⁻ + 12H+ + 9e⁻ + 3I₂

Now we can cancel out the electrons from both half-reactions:

3HIO + 3H₂O + 6I⁻ → 3IO₃⁻ + 12H+ + 3I₂

Finally, we can simplify the equation by dividing all coefficients by 3:

HIO + H₂O + 2I- → IO₃⁻ + 4H+ + I₂

Learn more about the balanced equation: https://brainly.com/question/7181548

#SPJ11

Answer:

Yes

Explanation:

17×10−21 J/molecule.

If too much sulfuric acid is added during the formation of alum, the percent yield may decrease. Sulfuric acid can react with the aluminum compound and create a by product, decrease the amount of alum produced.

According to the definition of percent yield, it is the percentage of actual yield to potential yield.

Simply dividing the theoretical yield by the actual yield and multiplying the result by 100 to obtain the result in percentage form allowed us to calculate the product's percent yield. Additionally, excess sulfuric acid can cause the reaction to become too acidic, which can also decrease the yield.  This is because an excess of sulfuric acid can lead to side reactions, producing unwanted by products, and consuming some of the desired reactants. As a result, less alum is formed, leading to a lower percent yield. Therefore, it is important to add the correct amount of sulfuric acid to the reaction mixture in order to achieve the highest possible percent yield of alum.

Learn more about percent yield here

https://brainly.com/question/17042787

#SPJ11

To calculate the pH of the solution, we first need to determine the concentration of hydroxide ions ([tex]OH^{-}[/tex]) in the solution, since sodium oxide is a strong base that dissociates completely in water to give [tex]Na^{+}[/tex] and [tex]OH^{-}[/tex] ions.

We can start by calculating the number of moles of sodium oxide dissolved in the solution:

0.15 g [tex]Na_{2} O[/tex] / (61.98 g/mol [tex]Na_{2} O[/tex]) = 0.00242 mol [tex]Na_{2} O[/tex]

Since sodium oxide dissociates completely in water to give two moles of sodium ions and one mole of hydroxide ions per mole of [tex]Na_{2} O[/tex], we know that the number of moles of [tex]OH^{-}[/tex] in the solution is:

0.00242 mol [tex]Na_{2} O[/tex] x (1 mol [tex]OH^{-}[/tex]/1 mol [tex]Na_{2} O[/tex]) = 0.00242 mol [tex]OH^{-}[/tex]

Next, we can calculate the concentration of hydroxide ions in the solution, which is given by:

[[tex]OH^{-}[/tex]] = moles of [tex]OH^{-}[/tex] / volume of solution in liters

[[tex]OH^{-}[/tex]] = 0.00242 mol / (119.5 mL x 1 L/1000 mL) = 0.0203 M

Finally, we can calculate the pH of the solution using the equation:

pH = 14 - log [[tex]OH^{-}[/tex]]

pH = 14 - log (0.0203) = 11.69

Therefore, the pH of the solution prepared by dissolving 0.15 g of sodium oxide in water is 11.69 to two decimal places.

Learn more about sodium oxide

https://brainly.com/question/29172011

#SPJ4

This is a chemical reaction in which N2O4(g) is converted into 2 moles of NO2(g).

This is a chemical reaction in which N2O4(g) is converted into 2 moles of NO2(g). The reaction rate can be expressed using the rate equation:

rate = k[N2O4]

where k is the rate constant and [N2O4] is the concentration of N2O4 at any given time.

The problem does not provide any information about the concentration of N2O4 or the rate constant. Therefore, we cannot directly calculate the number of moles of N2O4 or NO2 at any given time.

However, assuming the reaction is first-order with respect to N2O4, we can use the half-life formula to determine the number of moles of N2O4 and NO2 at a specific time. The half-life of a first-order reaction is given by:

t1/2 = ln(2) / k

where ln is the natural logarithm. Solving for k, we get:

k = ln(2) / t1/2

where t1/2 is the half-life of the reaction.

Using the given information that the half-life of the reaction is 4 minutes, we can calculate the rate constant as:

k = ln(2) / 4 = 0.1733 min^-1

At t = 10 min, the fraction of N2O4 remaining is given by:

[N2O4] / [N2O4]0 = e^(-kt) = e^(-0.1733 * 10) = 0.227

where [N2O4]0 is the initial concentration of N2O4. Therefore, the number of moles of N2O4 at t = 10 min is:

moles of N2O4 = [N2O4] * volume of container / molar mass of N2O4

We don't have any information about the volume of the container, so we can't calculate the moles of N2O4.

However, since we know that 1 mole of N2O4 produces 2 moles of NO2, we can calculate the number of moles of NO2 produced at t = 10 min:

moles of NO2 = 2 * moles of N2O4 * 0.227

Substituting the value of moles of N2O4 from above, we get:

moles of NO2 = 0.227 * volume of container / molar mass of N2O4

Since we don't have any information about the volume of the container or the molar mass of N2O4, we can't calculate the moles of NO2.

Therefore, the answer to the question cannot be determined without additional information.

Learn more about N2O4(g)

brainly.com/question/29620266

#SPJ11

The relative acidities of 1-Butanol, 2-Propanol, 2-Methyl-2-propanol, and Phenol are ranked using ARIO as follows Phenol > 2-Methyl-2-propanol > 2-Propanol > 1-Butanol.

A strong base like sodium hydride (NaH) can deprotonate these alcohols.

The Ferric chloride test can be used to detect the presence of phenolic groups.


1. Atom: Phenol has the most acidic proton since it is attached to an oxygen atom in an aromatic ring.

2. Resonance: Phenol's acidity is further increased due to resonance stabilization of the resulting phenoxide ion.

3. Induction: 2-Methyl-2-propanol has a more acidic proton due to the electron-withdrawing inductive effect of the three methyl groups.

4. Orbitals: 2-Propanol and 1-Butanol have sp3 hybridized carbon atoms, making them less acidic than the others.

Ferric chloride test application: To test for the presence of phenolic groups, mix a few drops of the compound with a few drops of 1% aqueous ferric chloride solution. A positive test will show a color change, usually to purple or blue.

To know more about resonance stabilization click on below link:

https://brainly.com/question/31040880#

#SPJ11

The concentration of aqueous NH3 required to just start precipitation of Mn(OH)2 from a 0.020 M solution of MnSO4 is 8.4 × 10^−2 M

To determine the concentration of aqueous NH3 necessary to just start precipitation of Mn(OH)2 from a 0.020 M solution of MnSO4, we need to use the given Kb for NH3 and the Ksp for Mn(OH)2.

First, find the concentration of OH- ions needed to start the precipitation using the Ksp expression for Mn(OH)2:

Ksp = [Mn2+][OH-]^2
4.6 × 10^−14 = (0.020)[OH-]^2

Solve for [OH-]:
[OH-] = √(4.6 × 10^−14 / 0.020) ≈ 4.8 × 10^−7 M

Now, use the Kb expression for NH3 to find the required concentration of NH3:

Kb = [NH4+][OH-] / [NH3]
1.8 × 10^−5 = [NH4+][4.8 × 10^−7] / [NH3]

Assume that [NH4+] and [OH-] are equal since they come from the same source (NH3). Therefore:

1.8 × 10^−5 = [4.8 × 10^−7]^2 / [NH3]

Solve for [NH3]:

[NH3] ≈ 8.4 × 10^−2 M

Your answer: e. 8.4 × 10^−2 M

Know more about Ksp here:

https://brainly.com/question/27132799

#SPJ11

There are 4 moles of gas on the left side (3H2 + N2) and 2 moles on the right side (2NH3), the reaction will shift right, toward products, to restore equilibrium. Therefore, the correct answer is A. In order to restore equilibrium, the reaction shifts right, toward products.

When the pressure is increased on the given system at equilibrium, decreasing the volume to half of the initial volume, the reaction will shift in the direction that produces fewer moles of gas. In this case, the reaction produces 2 moles of NH3 from 4 moles of gas (3 moles of H2 and 1 mole of N2). Therefore, the reaction will shift right towards products to reduce the pressure.
So, the correct answer is A. In order to restore equilibrium, the reaction shifts right, toward products.
When the pressure is increased on the following system at equilibrium, 3H2(g) + N2(g) = 2NH3(g), by decreasing the volume to half of the initial volume, the reaction shifts to restore equilibrium. According to Le Chatelier's principle, the system will shift to counteract the change in pressure. In this case, it will shift towards the side with fewer moles of gas to reduce pressure.
Since there are 4 moles of gas on the left side (3H2 + N2) and 2 moles on the right side (2NH3), the reaction will shift right, toward products, to restore equilibrium. Therefore, the correct answer is A. In order to restore equilibrium, the reaction shifts right, toward products.

To learn more about Moles, click here:

brainly.com/question/26416088

#SPJ11

To dissolve 4.7 g of AgBr, you need 22.2 g of Na₂S₂O₃.

To find the mass of Na₂S₂O₃ needed, follow these steps:

1. Calculate the moles of AgBr: 4.7 g / 187.77 g/mol (molar mass of AgBr) = 0.025 mol AgBr.
2. Use the Ksp value to determine the concentration of Ag⁺ ions: [Ag⁺] = √(Ksp) = √(3.3 x 10⁻¹³) = 1.82 x 10⁻⁷ M.
3. Calculate the moles of Ag⁺ ions: (1.82 x 10⁻⁷ M) x 1.0 L = 1.82 x 10⁻⁷ mol Ag⁺.
4. Use the stoichiometry of the reaction to find the moles of Na₂S₂O₃ needed: 1 mol Na₂S₂O₃ / 2 mol Ag⁺ = 0.5 mol Na₂S₂O₃/mol Ag⁺.
5. Calculate the moles of Na₂S₂O₃ required: 0.5 mol Na₂S₂O₃/mol Ag⁺ x 1.82 x 10⁻⁷ mol Ag⁺ = 9.1 x 10⁻⁸ mol Na₂S₂O₃.
6. Convert moles of Na₂S₂O₃ to grams: 9.1 x 10⁻⁸ mol Na₂S₂O₃ x 158.11 g/mol (molar mass of Na₂S₂O₃) = 22.2 g Na₂S₂O₃.

To know more about molar mass click on below link:

https://brainly.com/question/22997914#

#SPJ11

When 2.65 g of an unknown weak acid (HA) with a molar mass of 85.0 g/mol is dissolved in 250.0 g of water, the Kₐ for the unknown weak acid is 2.367 × 10⁻⁴

We know that,

dT = Kf ×molality × i

    = Kf×m×i

"i" is the van't Hoff factor.

Molality is defined as the number of moles of solute divided by the mass of solvent in kg.

i.e. molality

= (no of moles of solute) / Kg of solvent

= 2.65g /250g x 1 mol /85 g x1000g/kg

=0.1247 moles

and Kf for water = - 1.86 and dT = -0.259

by substitution

0.259 = 1.86× 0.1247 × i

Therefore, i = 1.116

when the degree of dissociation formula is:

when n=2 and  i = 1.116

a= i-1/n-1

= (1.116 -1)/(2-1)

= 0.116

Substituting these values to find Kₐ

∴K = Ca^2/(1-a)

    = (0.1247 × 0.116)² / (1-0.116)

    = 2.367 × 10⁻⁴

To know more about  Kₐ here

https://brainly.com/question/9173788

#SPJ4

The hydroxide ion concentration of an aqueous solution of 0.355 M hydrocyanic acid is 7.27 x 10⁻⁶ M.

To find the hydroxide ion concentration of an aqueous solution of 0.355 M hydrocyanic acid, we need to first write the balanced chemical equation for the dissociation of hydrocyanic acid in water:

[tex]HCN + H2O[/tex]⇌ [tex]H3O+ + CN-[/tex]

The acid dissociation constant, Ka, for hydrocyanic acid is 4.9 x 10⁻¹°. We can write the expression for the acid dissociation constant:

Ka =[tex][H3O+][CN-] / [HCN][/tex]

Since we are looking for the hydroxide ion concentration, [OH-], we can use the relationship between the concentration of hydroxide ions and the concentration of hydronium ions:

Kw = [tex][H3O+][OH-][/tex]

At 25°C, the value of the ion product constant, Kw, is 1.0 x 10⁻¹⁴. Using the expression for Kw, we can find the concentration of hydroxide ions:

[tex][OH-][/tex] = [tex]Kw / [H3O+][/tex]

[tex][OH-][/tex]= [tex]1.0 x 10⁻¹⁴ / [H3O+][/tex]

To find [H3O+], we can use the expression for the acid dissociation constant and the concentration of hydrocyanic acid:

Ka = [tex][H3O+][CN-] / [HCN][/tex]

[tex][H3O+][/tex] = [tex]Ka x [HCN] / [CN-][/tex]

Substituting this into the expression for [OH-], we get:

[tex][OH-][/tex] = 1.0 x 10⁻¹⁴ / [tex](Ka x [HCN] / [CN-])[/tex]

[tex][OH-][/tex] = [tex]([CN-] / Ka) x (1 / [HCN])[/tex] x 1.0 x 10⁻¹⁴

[tex][OH-][/tex]= (0.355 M / 4.9 x 10⁻¹°) x (1 / 0.355 M) x 1.0 x 10⁻¹⁴

[tex][OH-][/tex]= 7.27 x 10⁻⁶  M

To find the pH of an aqueous solution of 0.595 M acetic acid, we need to first write the balanced chemical equation for the dissociation of acetic acid in water:

[tex]CH3COOH + H2O ⇌ H3O+ + CH3COO-[/tex]

The acid dissociation constant, Ka, for acetic acid is 1.8 x 10⁻⁵. We can write the expression for the acid dissociation constant:

Ka = [tex][H3O+][CH3COO-] / [CH3COOH][/tex]

To find the pH, we can use the relationship between the concentration of hydronium ions and the pH:

pH = -log[tex][H3O+][/tex]

To find [H3O+], we can use the expression for the acid dissociation constant and the concentration of acetic acid:

Ka = [tex][H3O+][CH3COO-] / [CH3COOH][/tex]

[tex][H3O+][/tex] = Ka x [tex][CH3COOH] / [CH3COO-][/tex]

Substituting this into the expression for pH, we get:

pH = -log[tex](Ka x [CH3COOH] / [CH3COO-])[/tex]

pH = -log(Ka) - log[tex]([CH3COOH] / [CH3COO-])[/tex]

pH = -log(1.8 x 10⁻⁵) - log(0.595 [tex]M / [CH[/tex]

Learn more about hydrocyanic

brainly.com/question/28590511

#SPJ11

The value of the "reaction quotient (Q)" is equal to the "equilibrium constant (K) when equilibrium is reached.

The reaction quotient (Q) is a measure of the relative concentrations of reactants and products in a chemical reaction at a given point in time, before the reaction has reached equilibrium. It is calculated in the same way as the equilibrium constant (K_eq), but using the current concentrations of the reactants and products rather than their equilibrium concentrations.

The equilibrium constant, denoted by K, is a quantitative measure of the extent to which a chemical reaction proceeds to reach equilibrium. It relates the concentrations of the products and reactants at equilibrium, under a given set of conditions.

Learn more about equilibrium:

https://brainly.com/question/2162534

#SPJ11