Answer:
0.561 M
Explanation:
Step 1: Given data
Mass of aluminum chloride (m): 0.375 gMolar mass of aluminum chloride (M): 133.34 g/molVolume of the solution (V): 15.0 mLStep 2: Calculate the molar concentration of aluminum chloride (C)
We will use the following expression.
[tex]C = \frac{m}{M \times V(L) } = \frac{0.375g}{133.34 g/mol \times 0.0150L } = 0.187M[/tex]
Step 3: Write the reaction of dissociation of aluminum chloride
AlCl₃(aq) ⇒ Al³⁺(aq) + 3 Cl⁻(aq)
Step 4: Calculate the concentration of chloride ions
The molar ratio of AlCl₃ to Cl⁻ is 1:3. The concentration of Cl⁻ is 3/1 × 0.187 M = 0.561 M
Explain how the immune system responds to pathegons
Answer:
The immune system responds to antigens by producing cells that directly attack the pathogen, or by producing special proteins called antibodies. Antibodies attach to an antigen and attract cells that will engulf and destroy the pathogen. The main cells of the immune system are lymphocytes known as B cells and T cells.
Which of the following is an example of a mixture?
A.
calcium
B.
the atmosphere
C.
carbon dioxide
D.
water
Answer:
B. the atmosphere
Explanation:
hope it helps
2. Combining 0.242 mol Fe2O3 with excess carbon produced 10.2 g Fe.
Fe2O3+3C⟶2Fe+3CO
(a) Actual yield of Fe mole
(b) percentage mole
(c) theoretical yield of iron mmoles
actual yield = 0.182 mole
theoretical yield : 0.484 mole
percentage mole(% yield)=37.6%
Further explanationPercent yield is the comparison of the amount of product obtained from a reaction with the amount you calculated
General formula:
Percent yield = (Actual yield / theoretical yield )x 100%
An actual yield is the amount of product actually produced by the reaction. A theoretical yield is the amount of product that you calculate from the reaction equation according to the product and reactant coefficients
Reaction
Fe₂O₃+3C⟶2Fe+3CO
a. actual yield of Fe mole
10.2 g produced
[tex]\tt mol~Fe=\dfrac{10.2}{56}=0.182[/tex]
b. percentage mole and theoretical yield
0.242 mol Fe₂O₃ = 2 x 0.242 mol Fe = 0.484 mol (theoretical yield)
percentage yieldpercentage mole)
[tex]\tt \dfrac{0.182}{0.484}=0.376=37.6\%[/tex]
How does body temperature, energy level, and water level affect a person’s ability to survive?
what is the device to use to measure a potential difference in a circuit called?
Answer:
c. Voltmeter
Explanation:
PLATO LIVES MATTER
1) If a bottle of olive oil contains 1.3 kg of olive oil, what is the volume, in milliliters, of the olive oil? Express your answer to two significant figures and include the appropriate units. 2) A cannon ball made of iron has a volume of 116 cm^3. What is the mass, in kilograms, of the cannon ball? Express your answer to three significant figures and include the appropriate units. 3) A balloon filled with helium has a volume of 6.1 L. What is the mass, in grams, of helium in the balloon? Express your answer to two significant figures and include the appropriate units.
Answer:
1) 1.4 × 10³ mL
2) 0.913 kg
3) 1.1 g
Explanation:
1)
Step 1: Calculate the volume of 1.3 kg of olive oil
The density of olive oil is 0.917 kg/L.
1.3 kg × (1 L/0.917 kg) = 1.4 L
Step 2: Convert the volume to mL
We will use the relationship 1 L = 10³ mL.
1.4 L × (10³ mL/1 L) = 1.4 × 10³ mL
2)
Step 1: Calculate the mass of the cannon ball
The density of iron is 7.87 g/cm³.
116 cm³ × 7.87 g/cm³ = 913 g
Step 2: Convert the mass to kg
We will use the relationship 1 kg = 10³ g.
913 g × (1 kg / 10³ g) = 0.913 kg
3)
Step 1: Calculate the mass of the helium in the balloon
The density of balloon is 0.18 g/L.
6.1 L × 0.18 g/L = 1.1 g
A particular reaction has an enthalpy and entropy of reaction of ∆H = +33 kJ/mol and ∆S = +0.15 kJ/mol⋅K. At the three indicated temperatures, determine if either reactants or products are favored?
Answer:
Explanation: check my paage
How do hurricanes form? How do hurricanes form?
a Hurricanes form when winds circulate about a column of cool air.
b Hurricanes form when two warm fronts meet over the ocean
c Hurricanes form when warm air over the equator mixes with cold air from the poles
d Hurricanes form as a result of rising warm air and circulating winds
Answer:
D. Hurricanes form as a result of rising warm air and circulating winds
Explanation:
Tumu’s class was given an assignment to feature a scientist that contributed to the development of the cell theory. The class decided to use images to feature the scientist of their choice.
Which image would Tumu most likely use in his assignment to feature Rudolf Virchow?
the magnified shapes of cells in a piece of cork
the different cells that make up a plant leaf
the types of cells at work in the human body
the way root cells reproduce to increase root length
Answer:
The types of cells at work in the human body
Explanation:
Rudolf Virchow was a German physician who is known as the father of modern pathology. He contributed to the development of the cell theory by concluding that all cells come from preexisting cells. This led to the conclusion that diseases occur at the cellular level, which allowed scientists to diagnose diseases more accurately.
Considering that Virchow analyzed human cells, the image that Tumu would be most likely to use in his assignment is the one of the types of cells at work in the human body.
Answer:
D the way root cells reproduce to increase root length
Explanation:
Have a good day!
Whats the answer 50 points and brainliest if its right
Answer:
D
Explanation:
How many grams of oxygen gas will be produced when 2.50 moles of potassium chlorate is decomposed?
Answer:
[tex]m_{O_2}=120gO_2[/tex]
Explanation:
Hello!
In this case, since the decomposition of potassium chlorate is:
[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]
We can see a 2:3 mole ratio between potassium chlorate and oxygen (molar mass 32.0 g/mol), thus, via stoichiometry, we compute the mass of oxygen that are produced by the decomposition of 2.50 moles of this reactant:
[tex]m_{O_2}=2.50molKClO_3*\frac{3molO_2}{2molKClO_3} *\frac{32.0gO_2}{1molO_2}\\\\m_{O_2}=120gO_2[/tex]
Best regards!
From the following heats of reaction,
2C (graphite) + H2 (g) -->C2H2 (g) H = 227 kJ
6C (graphite) + 3H2 (g) -->C6H6 (l) H = 49 kJ
calculate the heat for the reaction
3C2H2 (g) -->C6H6 (l)
A. 26.7 kJ
B. -26.7 kJ
C. -178 kJ
D. 178 kJ
E. -632 kJ
F. 632 kJ
Answer:+178
Explanation:
The heat of the reaction for the following reactions is 178 kJ. the correct option is D.
What is the heat of the reaction?The heat that is added or removed during a chemical reaction is called the heat of reaction.
It is also called the enthalpy of the reaction.
The heat is absorbed or released to maintain the temperature of the reaction.
The enthalpy can be calculated by subtracting the enthalpy of the product from the enthalpy of the reactant.
Thus, the correct option is D.
Learn more about the heat of the reaction
https://brainly.com/question/517776
Calculate the pH after 20.0% (by moles) of the benzoic acid is converted to benzoate anion by addition of a strong base. Use the dissociation equilibrium to calculate the pH. pH = ________
Answer:
pH = 4.79
Explanation:
The equilibrium of benzoic acid, BH, is:
BH ⇄ B⁻ + H⁺
Where B⁻ is benzoate anion
Where the dissociation equilibrium, Ka, is:
Ka = 6.46x10⁻⁵ = [B⁻] [H⁺] / [BH]
If 20.0% is B⁻, 80.0% is BH, replacing:
6.46x10⁻⁵ = [20.0%] [H⁺] / [80.0%]
1.615x10⁻⁵ = [H⁺]
As pH = -log [H⁺]
pH = 4.796.0 L of a gas exert a pressure of 2.5 atm. When the pressure is increased 2 points
to 10.0 atm, what is the new volume of the gas?
O 1.0L
O 1.5L
O 1.7L
O 25L
2. Which of the following is NOT a necessary input for the process of photosynthesis?
A. CO2 (carbon dioxide)
B. Sunlight
C. H20 (water)
D. O2 (oxygen)
The answer option which is not a necessary input for the process of photosynthesis is: D. [tex]O_2[/tex] (oxygen)
Photosynthesis can be defined as a biological and chemical process through which living organisms such as green plants, transform light energy (sunlight) into chemical energy.
Basically, both sunlight, carbon dioxide ([tex]C0_2[/tex]) and water ([tex]H_2O[/tex]) contained in the Earth's atmosphere plays a significant role in photosynthesis because they serve as an input.
Hence, the necessary input for the process of photosynthesis to take place include the following:
Water ([tex]H_2O[/tex]) Sunlight (light energy).Carbon dioxide ([tex]C0_2[/tex]).In conclusion, [tex]O_2[/tex] (oxygen) is an end product (output) of photosynthesis rather being an input.
Read more: https://brainly.com/question/12827458
Easy Mole Conversion:
How many grams are in 2.00 moles of cobalt (I) hydroxide?
Answer:
Mass = 185.896 g
Explanation:
Given data:
Mass in gram = ?
Number of moles = 2.00 mol
Solution:
Formula:
Number of moles = mass/molar mass
Molar mass of cobalt (I) hydroxide =92.948 g/mol
by putting the values,
2.00 mol = Mass/92.948 g/mol
Mass = 2.00 mol × 92.948 g/mol
Mass = 185.896 g
During bromination using NBS, the addition product is not observed because the rate of addition is _______than the rate of the chain propagation steps.
Answer:
slower
Explanation:
NBS is used in place of Br2 during bromination because the use of Br2 tends to result in the formation of a large concentration of the addition product. This is because, the Br2 interacts with the double bond to yield only the dibromide (addition product).
The usefulness of NBS lies in the fact that it provides a lower concentration of Br2, and such that the rate addition is slower than the chain propagation steps. Only the monobromination product is observed
The low concentration of Br2 allows the free-radical reaction to out-compete the alkene addition reaction.
Urgent help me please answer it if you know it
How much work (in JJ) is required to expand the volume of a pump from 0.0 LL to 2.5 LL against an external pressure of 1.1 atmatm
Answer:
- 278.85 J
Explanation:
Given that:
Pressure = 1.1 atm
The initial volume V₁ = 0.0 L
The final volume V₂ = 2.5 L
The work that takes place in a reaction at constant pressure can be expressed by using the equation:
W = P(V₂ - V₁ )
Since the volume of the gas is expanded from 0 to 2.5 L when 1.1 atm pressure is applied. Then, the work can be given by the expression:
W = - P(V₂ - V₁ )
W = -1.1 atm ( 2.5 - 0.0) L
W = -1.1 atm (2.5 L)
W = -2.75 atm L
Recall that:
1 atm L = 101.4 J
Therefore;
-2.75 atm L = ( -2.75 × 101.4 )J
= -278.85 J
Thus, the work required at the chemical reaction when the pressure applied is 1.1 atm = - 278.85 J
What is the mass, in grams, of 2.3 moles of gold?
Answer:
453.031g
Explanation:
atomic mass (molar mass)- 196.97g/m
2.3(196.97)=453.031
Which of these statements best answers the question: What is art?
Answer:
You didn't provide any statements. If it is an option, art is a form of expression. Something created from imagination that expresses the thoughts and emotions of the artist.
The statement that best answers the question: What is art is that—Art is a form of visual language. Therefore, the correct option is A.
What is an art?Art is a diverse range of human activities and products that are created with the intention of expressing the imagination, emotions, or ideas, or to make a statement, in a visually appealing way.
Art can take many forms, including visual arts (such as painting, sculpture, and photography), performing arts (such as music, dance, and theater), and literary arts (such as poetry and prose).
It is typically seen as a form of communication and can be used to convey ideas, emotions, or political, social or cultural messages. It can also be used to simply evoke a response or emotion in the viewer, or to create a sense of beauty or aesthetic enjoyment. Therefore, the correct option is A.
Learn more about art, here:
https://brainly.com/question/8861182
#SPJ6
The question is incomplete, but most probably the complete question is,
Which of these statements best answers the question: What is art?
A. Art is a form of visual language.
B. Art is a form of written language.
C. Art is a form of spoken language.
D. Art is a form of dance language.
Is SO3 ionic or ionic using the stock system or molecular
Answer:
Molecular
Explanation:
Using the rules for the nomenclature for naming binary covalent (molecular) compounds, the compound SO3 is named sulfur trioxide. The prefix tri- indicates that the oxygen has a subscript of 3 and that a molecule of sulfur trioxide has three oxygen atoms.
2.) Given that the reaction below is a precipitation reaction, what is the missing symbol?
AND
3.) Which of the following would produce a precipitate when mixed water (H20)?
PLZ HELP IM GONNA FAIL THE SEMESTER!!!! I'LL AWARD BRAINLIEST!!
Answer:
2) (s)
3) PbBr2
Explanation:
2) This is a precipitation rxn which means if forms a solid, We use (s) for solid.
3) Refer to solubility table
An object has a mass of 3.50 grams and a density of 5.61 g/mL. What is the volume of this object? *
Answer:
0.62 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]volume = \frac{3.50}{5.61} \\ = 0.6238859...[/tex]
We have the final answer as
0.62 mLHope this helps you
Which of the following is chemical property?
Question is in the picture help ASAP please
Answer:
C
Explanation:
The mass of 900. atoms of sodium(Na)
Answer:
3.44 × 10⁻²⁰ g Na
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
900 atoms Na
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of Na - 22.99 g/mol
Step 3: Convert
[tex]900 \ atoms \ Na(\frac{1 \ mol \ Na}{6.022 \cdot 10^{23} \ atoms \ Na} )(\frac{22.99 \ g \ Na}{1 \ mol \ Na} )[/tex] = 3.4359 × 10⁻²⁰ g Na
Step 4: Check
We are given 3 sig figs. Follow sig fig rules and round.
3.4359 × 10⁻²⁰ g Na ≈ 3.44 × 10⁻²⁰ g Na
Which products are formed when aluminum is added to a silver chloride solution? Use the activity series below if needed. Al> Mn > Zn>.Cr > Fe > Cd> Co > Ni > Sn > Pb>H> Sb > Bi > Cu> Ag > Pd >Hg > Pt O none O only AICI3 O AlCl3 and Ag O AIAg3 and Cl2
Answer:
AlCl3 and Ag
Explanation:
Edge 2020
The products formed when aluminum is added to a silver chloride solution are "AlCl3 and Ag".
The reaction of aluminum and silver chloride is a single substitution type of reaction that is expressed as follows: Al (s) + 3AgCl (aq) = AlCl3 (aq) + 3Ag (s)When aluminum is added to the silver chloride solution, the cations are exchanged in the process forming AlCl3 and Ag.
Chemical reaction, a process in which one or more substances, the reactants, are converted to one or more different substances, the products. Substances are either chemical elements or compounds. A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.Chemical reactions are an integral part of technology, culture, and indeed of life itself. Burning fuels, smelting iron, making glass and pottery, brewing beer, and making wine and cheese are among many examples of activities incorporating chemical reactions that have been known and used for thousands of years. Chemical reactions abound in the geology of Earth, in the atmosphere and oceans, and in a vast array of complicated processes that occur in all living systems.Learn more about chemical reactions
https://brainly.com/question/26018275
#SPJ2
HURRY
Which part of an atom is mostly empty space?
nucleus
proton cloud
electron cloud
neutron
Answer:
Electron cloud
Explanation:
If you were to scale the size of the atom up to have the nucleus be about the size of a basket ball, then the placement of the actual electrons (about the size of a large marble at this scale) throughout the cloud would be many yards away from the nucleus.
Question 1 of 10
In which state of matter do the particles move independently of one another?
A. Amorphous solid
B. Gas
C. Crystalline solid
D. Liquid
Answer:
Gas (B)
Explanation:
Which pair of elements would you expect to have similar properties?
Li and Fe
At and F
F and o
Ge and As