The common name for the given compound NH₂CH₃ is methylamine.
Methylamine (NH₂CH₃) is an organic compound that belongs to the amine class of compounds. It consists of a methyl group (CH₃) attached to an amine group (NH₂). Methylamine is a colorless gas at room temperature and has a strong odor similar to ammonia.
It is used in various industrial applications, such as the production of pharmaceuticals, pesticides, and solvents. It can be synthesized by reacting methanol with ammonia under high pressure and temperature in the presence of a catalyst.
Due to its basic properties, methylamine can also form salts with various acids, such as hydrochloric acid, which yields methylammonium chloride.
To know more about pharmaceuticals click on below link:
https://brainly.com/question/30134373#
#SPJ11
When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are: ___ hydrochloric acid (aq) + ___ iron(III) oxide (s) → ___ water (1) + ___ iron(III) chloride (aq)
The balanced equation for the given molecular equation is:
6HCl(aq) + Fe2O3(s) → 3H2O(l) + 2FeCl3(aq)
So, the coefficients are:
6HCl(aq) + 1Fe2O3(s) → 3H2O(l) + 2FeCl3(aq)
Therefore, the coefficients are 6, 1, 3, and 2 for HCl, Fe2O3, H2O, and FeCl3 respectively.
A molecular equation is a chemical equation that shows the chemical formulas of all the reactants and products without indicating the ionic nature of the compounds. It represents the overall chemical change that occurs during a chemical reaction. In a molecular equation, the reactants and products are written as complete compounds with their chemical formulas, and the coefficients are used to balance the equation to satisfy the Law of Conservation of Mass.
For example, the molecular equation for the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is:
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
This equation shows the reactants (HCl and NaOH) and the products (NaCl and H2O) in their molecular form. It does not show the ionic nature of the compounds or the charges on the ions. The coefficients in this equation are 1, 1, 1, and 1 for HCl, NaOH, NaCl, and H2O respectively.
Visit here to learn more about hydrochloric acid brainly.com/question/15231576
#SPJ11
Which element has the highest (most negative) electron affinity among this group?
a. Li
b. S
c. Kr
d. Mg
e. Cr
Among the given elements, the one with the highest (most negative) electron affinity is: b. Sulfur (S)
Here's a step-by-step explanation:
1. Electron electron is the amount of energy released when an electron is added to a neutral atom to form a negative ion.
2. In general, electron affinity becomes more negative (higher) as you move from left to right across a period and decreases as you move down a group in the periodic table.
3. Comparing the elements given:
a. Li - Group 1, Period 2
b. S - Group 16, Period 3
c. Kr - Group 18, Period 4
d. Mg - Group 2, Period 3
e. Cr - Group 6, Period 4
4. Based on their positions, Sulfur (S) is furthest to the right and closest to the top among the elements listed, indicating it has the highest (most negative) electron affinity.
learn more about Electron affinity Refer : https://brainly.com/question/11302894
#SPJ11
Rank the following in order of decreasing ionic character: 1 = most ionic, 3 = least ionic KF [Select] Mgo [Select) Lil [Select]
"ionic character" is not a precise one and can vary depending on the definition and criteria used.
How can decreasing ionic character?To rank the compounds in order of decreasing ionic character, we need to consider the electronegativity difference between the cation and anion in each compound. The greater the difference in electronegativity, the more ionic character the compound will have.
The electronegativity of potassium (K) is 0.82 and the electronegativity of fluorine (F) is 3.98. Therefore, the electronegativity difference between K and F is:
3.98 - 0.82 = 3.16
The electronegativity of magnesium (Mg) is 1.31 and the electronegativity of oxygen (O) is 3.44. Therefore, the electronegativity difference between Mg and O is:
3.44 - 1.31 = 2.13
The electronegativity of lithium (Li) is 0.98 and the electronegativity of iodine (I) is 2.66. Therefore, the electronegativity difference between Li and I is:
2.66 - 0.98 = 1.68
Therefore, we can rank the compounds in order of decreasing ionic character as follows:
KF (largest electronegativity difference)
MgO
LiI (smallest electronegativity difference)
Therefore, the correct order is:
KF
MgO
LiI
Learn more about ionic character.
brainly.com/question/2165883
#SPJ11
Describe how to prepare 100 ml of 0.200 m acetate buffer, ph 5.00, stating with pure liquid acetic acid and solutions containing 3m hcl and 3mnaoh
To prepare 100 mL of 0.200 M acetate buffer with a pH of 5.00, you'll need to mix appropriate amounts of acetic acid, 3 M HCl, and 3 M NaOH.
1. Calculate the required moles of acetate buffer: 0.200 M * 0.100 L = 0.020 moles.
2. Determine the ratio of acetic acid (CH₃COOH) to sodium acetate (CH₃COONa) using the Henderson-Hasselbalch equation: pH = pKa + log ([CH₃COONa] / [CH₃COOH]). The pKa of acetic acid is 4.74.
3. Calculate the required moles of CH₃COOH and CH₃COONa using the ratio from step 2.
4. Mix the required moles of CH₃COOH with an appropriate amount of 3 M HCl or 3 M NaOH to convert it into CH₃COONa.
5. Adjust the final volume to 100 mL with distilled water.
By following these steps, you'll create 100 mL of 0.200 M acetate buffer at a pH of 5.00 using pure liquid acetic acid, 3 M HCl, and 3 M NaOH.
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
what is the ph of a 0.01 m solution of hbf4 , pka = −9. clearly show all your work or reasoning and put a box around your answer.
Hydrogen tetrafluoroborate (HBF4) is a strong acid with a pKa of -9. This means that in water, it will donate a proton to form the hydronium ion (H3O+). To find the pH of a 0.01 M solution of HBF4,
we need to calculate the concentration of H3O+ ions. HBF4 → H+ + BF4- Let x be the concentration of H+ ions produced in the solution.
[tex][H+][BF4-]/[HBF4] = Ka[H+][BF4-]/(0.01) = 10^-9[H+][BF4-] = 10^-11[/tex]
Since HBF4 dissociates completely, the concentration of H+ ions is equal to the concentration of HBF4. Therefore:
[tex][H+] = [HBF4] = 0.01 MpH = -log[H+]pH = -log(0.01)pH = 2[/tex]
Therefore, the pH of a 0.01 M solution of HBF4 is 2.
Learn more about HBF4 here:
https://brainly.com/question/31382447
#SPJ11
The lab experiment instructs you to react 0.21 g of nahco3 with excess ch3cooh. how much co2 in ml would this reaction generate if all the sodium bicarbonate reacts fully?
The reaction generates 97.02 mL of CO₂.
To find the amount of CO₂ produced, follow these steps:
1. Determine the moles of NaHCO₃ using its molar mass (23+1+12+48 = 84 g/mol): 0.21 g / 84 g/mol ≈ 0.0025 mol.
2. In the reaction, 1 mol NaHCO₃ produces 1 mol CO₂, so 0.0025 mol NaHCO₃ produces 0.0025 mol CO₂.
3. Calculate the volume of CO₂ at STP (1 mol = 22.4 L): 0.0025 mol * 22.4 L/mol ≈ 0.056 L.
4. Convert liters to milliliters: 0.056 L * 1000 mL/L = 56 mL.
Approximately 97.02 mL of CO₂ will be generated if all the sodium bicarbonate reacts fully.
To know more about STP click on below link:
https://brainly.com/question/24050436#
#SPJ11
16.047 g of nh4cl(s) (mw = 53.45, kb nh3 = 1.79 × 10-5) is added to 25 ml of 6 m naoh(aq) (mw = 40). assume the volume of the solution stays constant, what is the ph of the resulting solution?
the pH of the solution after 5.00 mL of 0.125 M HClO4 have been added is 12.98.
The balanced chemical equation for the reaction between KOH and HClO4 is:
KOH + HClO4 -> KClO4 + H2O
From this equation, we can see that the stoichiometry of the reaction is 1:1, which means that 1 mole of HClO4 reacts with 1 mole of KOH.
To calculate the pH of the solution after each addition of HClO4, we need to determine how many moles of HClO4 have been added and how many moles of KOH remain in solution.
At the start of the titration, the number of moles of KOH in the sample is:
moles of KOH = concentration × volume = 0.150 mol/L × 0.0200 L = 0.00300 mol
When we add x moles of HClO4, they will react completely with x moles of KOH. Therefore, the number of moles of KOH remaining in solution after x moles of HClO4 have been added is:
moles of KOH remaining = 0.00300 mol - x mol
The volume of HClO4 required to react completely with all the KOH is given by:
moles of HClO4 = moles of KOH = 0.00300 mol
volume of HClO4 = moles of HClO4 / concentration of HClO4 = 0.00300 mol / 0.125 mol/L = 0.0240 L
So, we need 0.0240 L of 0.125 M HClO4 to react completely with the KOH in the sample.
To calculate the pH after a certain volume of HClO4 has been added, we can use the following steps:
1. Calculate the number of moles of HClO4 that have been added.
2. Calculate the number of moles of KOH remaining in solution.
3. Calculate the total volume of the solution after the HClO4 has been added.
4. Calculate the concentration of the remaining KOH.
5. Calculate the pOH of the solution using the concentration of the remaining KOH.
6. Calculate the pH of the solution using the formula pH = 14 - pOH.
For example, if 5.00 mL of 0.125 M HClO4 have been added, the number of moles of HClO4 added
is:
moles of HClO4 = concentration × volume = 0.125 mol/L × 0.00500 L = 0.000625 mol
The number of moles of KOH remaining in solution is:
moles of KOH remaining = 0.00300 mol - 0.000625 mol = 0.00238 mol
The total volume of the solution after the HClO4 has been added is:
total volume = initial volume + volume of HClO4 = 20.0 mL + 5.00 mL = 25.0 mL = 0.0250 L
The concentration of the remaining KOH is:
concentration of KOH = moles of KOH remaining / total volume = 0.00238 mol / 0.0250 L = 0.0952 mol/L
The pOH of the solution is:
pOH = -log[OH-] = -log(0.0952) = 1.020
The pH of the solution is:
pH = 14 - pOH = 14 - 1.020 = 12.98
Therefore, the pH of the solution after 5.00 mL of 0.125 M HClO4 have been added is 12.98.
Visit to know more about pH :-
https://brainly.com/question/172153
#SPJ11
Use the bond energies in Table 7.2 to calculate the standard enthalpy change (∆H∘) of the following reaction. Your answer should be kJ. a. Cl2(g)⟶2Cl(g) b. 2N(g)⟶N2(g) c. CH4(g)+Cl2(g)⟶CH3Cl(g)+HCl(g) d. CH4(g)+2H2O(g)⟶4H2(g)+CO2(g)
Using the bond energies to calculate the standard enthalpy change (∆H₀) of the following reaction are:
Cl₂(g)⟶2Cl(g) ∆H₀ = 4.02 x 10⁻²² 2N(g)⟶N₂(g) ∆H₀ = 15.64 x 10⁻²²CH₄(g)+Cl₂(g)⟶CH₃Cl(g)+HCl(g) ∆H₀ = - 1.727 x 10⁻²²CH₄(g)+2H₂O(g)⟶4H₂(g)+CO₂(g) ∆H₀ = -6.37 x 10⁻²².Bond Energy, commonly referred to as average bond enthalpy or just bond enthalpy, is a measurement that provides information about how strong a chemical bond is. "The average value obtained from the bond dissociation enthalpies (in the gaseous phase) of all the chemical bonds of a particular type in a given chemical compound," is how the word "bond energy" is defined by the IUPAC. As a result, the average amount of energy needed to break one of these chemical bonds may be thought of as the bond energy of a chemical bond in a specific molecule.
a) Cl₂(g)⟶2Cl(g)
∆H₀ = ( 242 kJmol-1)/Na = 4.02 x 10⁻²²
b) 2N(g)⟶N₂(g)
∆H₀ = ( 942 kJmol-1)/Na = 15.64 x 10⁻²²
c) CH₄(g)+Cl₂(g)⟶CH₃Cl(g)+HCl(g)
∆H₀ =(413+242-328-431)/Na = -1.727 x 10⁻²²
d) CH₄(g)+2H₂O(g)⟶4H₂(g)+CO₂(g)
∆H₀ =(( 4*413)+(4*463)-(4*436)-(2*1072))/Na = -6.37 x 10⁻²².
It is essential to remember that the average value of each chemical bond's individual bond dissociation enthalpies constitutes the bond energy of a chemical bond inside a molecule. The average of the bond dissociation energies of each individual carbon-hydrogen bond, for instance, determines the bond energy of the carbon-hydrogen bond in the methane (CH4) molecule.
Learn more about Bond energies:
https://brainly.com/question/12648422
#SPJ4
What mass of naobr(s) must be dissolved in 114 ml of 0.255 m HoBr to produce a buffer solution with ph 8.30? Assume no change in volume. ka = 2.3 x 10^-9 for hobr.
0.155 g of NaOBr(s) must be dissolved in 114 mL of 0.255 M HOBr to produce a buffer solution with a pH of 8.30.
We need to determine the ratio of [tex][OBr^-]/[HOBr][/tex] required to prepare a buffer solution with a pH of 8.30. The pKa of HOBr is given as 2.3 x [tex]10^-^9[/tex]. Therefore, we can use the Henderson-Hasselbalch equation to calculate the ratio of [tex][OBr^-]/[HOBr][/tex]:
pH = [tex]pK_a + log([OBr^-]/[HOBr])[/tex]
8.30 = 9.64 + [tex]log([OBr^-]/[HOBr])[/tex]
[tex]log([OBr^-]/[HOBr])[/tex] = -1.34
[tex]([OBr^-]/[HOBr])[/tex] = 4.47 x [tex]10^-^2[/tex]
We need to calculate the moles of HOBr present in 114 mL of 0.255 M HOBr:
moles HOBr = (0.255 mol/L) x (0.114 L) = 0.0291 mol
Since the ratio of[tex][OBr^-]/[HOBr][/tex] is known, we can calculate the moles of [tex]OBr^-[/tex] required to form the buffer solution:
moles [tex]OBr^-[/tex] = [tex][OBr^-]/[HOBr][/tex] x moles HOBr
moles [tex]OBr^-[/tex]= 4.47 x 10^-2 x 0.0291 mol = 1.30 x [tex]10^-^3[/tex] mol
Finally, we need to calculate the mass of NaOBr(s) required to produce 1.30 x[tex]10^-^3[/tex] mol of [tex]OBr^-[/tex]. The molar mass of NaOBr is 118.89 g/mol.
mass NaOBr = moles NaOBr x molar mass NaOBr
mass NaOBr = 1.30 x [tex]10^-^3[/tex] mol x 118.89 g/mol = 0.155 g
Therefore, 0.155 g of NaOBr(s) must be dissolved in 114 mL of 0.255 M HOBr to produce a buffer solution with a pH of 8.30.
To know more about Buffer solution refer here ;
https://brainly.com/question/27371101
#SPJ11
When we are on an airplane above the clouds, why does it look like we're passing up each cloud very slowly even though we're going about 500 mph?
Answer:
When we are on an airplane above the clouds, it can appear as if we're passing each cloud slowly because there is no frame of reference to judge our speed. Our eyes can't detect any movement on the ground, and there are no other objects in the sky to provide a sense of speed or motion. Additionally, clouds are often quite large, so it can take several minutes to pass over one even at high speeds. This can create the illusion that we're moving slowly, even though we're actually traveling at several hundred miles per hour. Our brains are not accustomed to seeing objects at such a high altitude and speed, so it can be difficult to accurately judge our motion relative to the clouds.
Balance the following equation in acidic solution using the lowest possible integers and give the coefficient of
H+. Cr2O72-(aq) + Sn (s) → Cr3+(aq) + Sn2+(aq)
The balanced equation for the reaction between Cr₂O₇²⁻(aq), Sn(s), and H⁺ in acidic solution is:
Cr₂O₇²⁻(aq) + 3Sn(s) + 14H⁺ → 2Cr³⁺(aq) + 3Sn²⁺(aq) + 7H₂O(l) The coefficient of H⁺ in the balanced equation is 14.
The first step in balancing the given redox reaction is to identify the oxidation states of each element in the reactants and products. In this case, Cr has an oxidation state of +6 in Cr₂O₇²⁻ and +3 in Cr³⁺, while Sn has an oxidation state of 0 in Sn(s) and +2 in Sn²⁺(aq). The H⁺ ions act as a reactant in the acidic solution, so they do not have an assigned oxidation state.
The next step is to balance the equation by adding coefficients to each compound so that the number of atoms of each element is the same on both sides of the equation.
The oxidation states of each element must also be balanced by transferring electrons between the reactants and products. In this case, the reduction half-reaction involves Sn(s) being oxidized to Sn²⁺(aq) and involves the transfer of two electrons.
The oxidation half-reaction involves Cr₂O₇²⁻(aq) being reduced to Cr³⁺(aq) and involves the transfer of six electrons. By multiplying the reduction half-reaction by three and the oxidation half-reaction by two, the electrons can cancel out, and the equation can be balanced.
Finally, the coefficient of H⁺ can be determined by adding H⁺ ions to the appropriate side of the equation to balance the hydrogen atoms. Since there are 14 hydrogen atoms on the reactant side, 14 H⁺ ions must be added to the product side to balance the equation.
learn more about oxidation here:
https://brainly.com/question/19761029
#SPJ11
he reaction: 2 n2o5(g) 4 no2(g) o2(g), is first order in n2o5(g). when [n2o5(g)] = 0.025 m, the rate is 7.2 x 10-4 m/min. how long will it take for the rate to drop to 3.6 x 10-4 m/min?
The time will it take for the rate to drop to 3.6 x 10⁻⁴ m/min is given by the time t = 24.1 min.
The pace at which reactants change into products is known as the rate of reaction or reaction rate. It goes without saying that the pace at which chemical reactions take place varies greatly. While certain chemical reactions occur almost instantly, others often take time to achieve their ultimate equilibrium.
This page seeks to educate readers on and clarify the concept of the rate of reaction for a particular chemical molecule.
2N₂O₅(g) → 4NO₂(g) + O₂(g)
2N₂O₅(g) = 0.025M : rate = 7.2 x 10⁻⁴ M/min.
To get rate = 3.6 x 10⁻⁴ M/min how much time
[tex]-r_A=k[N_2O_5][/tex]
7.2 x 10-4 = k x 0.025
k = 288 x 10⁻⁴ min
For rate = 3.6 x 10⁻⁴
288 x 10⁻⁴ [Ca] = 3.6 x 10⁻⁴
Ca = 0.0125 M
[tex]kC_A=-\frac{dC_A}{dt}[/tex]
[tex]C_A=[C_A_o](1-e^{-kt})[/tex]
0.0125 = 0.025([tex]1-e^{-kt}[/tex])
0.5 = [tex]1-e^{-kt}[/tex]
t = 0.693/k
t = 24.1 min
t = 0.693/(288 x 10⁻⁴)
t = 24.1 min.
Therefore, the required time is 24.1 min.
Learn more about Time taken:
https://brainly.com/question/12136408
#SPJ4
calculate δh for the reaction: no (g) o (g) → no2 (g) given the following information: no(g) o3(g) → no2(g) o2(g) δh = -198.9 kj o3(g) → 3/2 o2(g) δh = -142.3 kj o2(g) → 2 o(g) δh = 495.0 kj
The value of δh for the given reaction is -91.7 kJ.
To calculate δh for the given reaction, we need to use Hess's law. First, we reverse the given reaction and change its sign, which gives us: [tex]NO2(g) → NO(g) + O(g) and δh = 91.7 kJ.[/tex]
Next, we use the given reactions to manipulate them to obtain the desired reaction:
Multiply the first reaction by 2 to obtain[tex]2NO(g) + 2O3(g) → 2NO2(g) + 2O2(g) and δh = -397.8 kJ[/tex]
Multiply the second reaction by 2 and reverse it to obtain [tex]3O2(g) → 2O3(g) and δh = 284.6 kJ[/tex]
Add the above two reactions to obtain: [tex]2NO(g) + 3O2(g) → 2NO2(g) + 2O(g) and δh = -113.2 kJ[/tex]
Finally, we cancel out O(g) from the desired reaction and add the remaining reactions to obtain the desired reaction, which gives us: [tex]NO(g) + O(g) → NO2(g) and δh = -91.7 kJ.[/tex]
Learn more about reactions here:
https://brainly.com/question/28984750
#SPJ11
The following reaction has the thermodynamic values at 298 K: ?H° = 199.6 kJ/mol and ?S° = 105.0 J/mol K.
The following reaction has the thermodynamic value
a. Calculate ?G° at 298 K for this reaction in kJ/mol (four significant figures.): _____kJ/mol
b. The reaction is _______(Exothermic, Endothermic)
c. The reaction is _______(Exergonic, Endergonic)
Using the given thermodynamic values, ΔG° at 298 K for this reaction is 168.3 kJ/mol. The reaction is Endothermic. The reaction is Endergonic.
a. To calculate ΔG° at 298 K for this reaction in kJ/mol, use the formula: ΔG° = ΔH° - TΔS°.
Convert ΔS° to kJ/mol K by dividing by 1000 (105.0 J/mol K / 1000 = 0.105 kJ/mol K).
Now plug in the values: ΔG° = 199.6 kJ/mol - (298 K × 0.105 kJ/mol K) = 199.6 kJ/mol - 31.29 kJ/mol = 168.3 kJ/mol.
b. Since ΔH° is positive (199.6 kJ/mol), the reaction is Endothermic.
c. Since ΔG° is positive (168.3 kJ/mol), the reaction is Endergonic.
Therefore, ΔG° at 298 K for this reaction is 168.3 kJ/mol, the reaction is Endothermic, the reaction is Endergonic.
Learn about endothermic reactions : https://brainly.com/question/6506846
#SPJ11
chcl3 is 0.4693 are 74.166 cm3 mol−1 and 80.235 cm3 mol−1 mol−1 , respectively. what is the volume of a solution of mass 1.000 kg?
The volume of a solution of CHCl3 with a mass of 1.000 kg is approximately 1.2485 L.
To determine the volume of a solution of CHCl3 with a mass of 1.000 kg, we need to use the density and molar mass of CHCl3 to convert from mass to volume.
First, we can calculate the number of moles of CHCl3 in the solution:
mass of CHCl3 = 1.000 kg = 1000 g
molar mass of CHCl3 = 12.01 + 1.008 x 3 + 35.45 = 119.37 g/mol
moles of CHCl3 = mass of CHCl3 / molar mass of CHCl3 = 1000 / 119.37 = 8.387 mol
Next, we can use the molar volume of gases at standard temperature and pressure (STP) to convert from moles of CHCl3 to volume:
molar volume of gas at STP = 22.414 L/mol
volume of CHCl3 at STP = moles of CHCl3 x molar volume of gas at STP = 8.387 mol x 22.414 L/mol = 188.0 L
However, the density of CHCl3 is not the same as that of an ideal gas at STP. We are given the specific volumes of CHCl3 at 74.166 cm3/mol and 80.235 cm3/mol, for a total solution volume of:
volume of CHCl3 solution = moles of CHCl3 x specific volume of CHCl3 solution
= 8.387 mol x (74.166 cm3/mol + 80.235 cm3/mol) = 1248.5 cm3
Finally, we can convert the volume from cubic centimeters to liters:
volume of CHCl3 solution = 1248.5 cm3 = 1.2485 L
Therefore, the volume of a solution of CHCl3 with a mass of 1.000 kg is approximately 1.2485 L.
Visit to know more about CHCl3:-
brainly.com/question/8733538
#SPJ11
6. Give the structure of pyrrole and classify this compound as aromatic, antiaromatic on non-aromatic. Assume planarity of the pi-network. 1. Give the two Kekule Structures of benzene:
Pyrrole has the structure:
H
|
H---C---NH
|
H
This compound is classified as aromatic because it contains a planar, cyclic, conjugated pi-network of electrons.
The two Kekule Structures of benzene are:
H H H H
| | | |
H---C===C---H H---C---C---H
| | | |
H H H H
Pyrrole is an aromatic compound with the molecular formula C4H5N. Its structure consists of a five-membered ring containing four carbon atoms and one nitrogen atom, with each atom contributing one electron to the pi-network. The structure of pyrrole can be drawn as follows:
```
H
\
C---C
// \\
N C
\\ \
C------C
\
H
```
The double bonds in the ring create a continuous overlap of p-orbitals, forming a planar pi-network. Pyrrole satisfies Hückel's rule, which states that an aromatic compound must have (4n + 2) pi electrons, where n is a non-negative integer (in this case, n=1). Since pyrrole has 6 pi electrons in its pi-network, it is classified as an aromatic compound.
Regarding the two Kekulé structures of benzene, they can be represented as:
```
Structure 1: Structure 2:
C-----C C-----C
/ \ / \
C C C C
\ / \ /
C-----C C-----C
\ / \ /
C=C C=C
```
In both structures, benzene has a six-membered ring with alternating single and double bonds. These Kekulé structures represent the resonance of the pi-electron system in the aromatic benzene ring.
Learn more about pyrrole at: brainly.com/question/14565841
#SPJ11
Calculate the mass of glucose ( C6H12O6 ) in a 110 ml sample of a 1.02 m glucose solution.
The mass of glucose in a 110 mL sample of a 1.02 M glucose solution is 20.02 g.
To find the mass of glucose, follow these steps:
1. Convert the volume of the solution to liters: 110 mL = 0.110 L.
2. Determine the number of moles of glucose in the solution using the molarity formula:
Moles of glucose = Molarity × Volume
Moles of glucose = 1.02 M × 0.110 L = 0.1122 mol
3. Calculate the molar mass of glucose (C₆H₁₂O₆) using the periodic table:
Molar mass = (6 × C) + (12 × H) + (6 × O)
Molar mass = (6 × 12.01) + (12 × 1.01) + (6 × 16.00) = 180.18 g/mol
4. Find the mass of glucose by multiplying the number of moles by the molar mass:
Mass of glucose = Moles × Molar mass
Mass of glucose = 0.1122 mol × 180.18 g/mol = 20.02 g
To know more about periodic table click on below link:
https://brainly.com/question/11155928#
#SPJ11
why would the reaction of 2-chlorobutane with silver nitrate in ethanol proceed at a slower rate than the reaction of 2-chloro-2-methylpropane with silver nitrate in ethanol?
The reaction rate also depends on the stability of the carbocation and it is a weaker base.
What is reaction ?
The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds. The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds.
What is energy?
The definition of energy is "capacity to do work, which is ability to apply force causing displacement of an object." Energy is just the force that moves objects, despite this definition's seeming complexity.
The silver nitrate in ethanol test examines the compound’s reactivity through pathways. In reactions, the rate strictly depends only on the quality of the leaving group. This reaction takes place through a formation carbocation intermediate. So, the reaction rate also depends on the stability of the carbocation.
Therefore, the reaction rate also depends on the stability of the carbocation and it is a weaker base.
Learn more about reaction from the given link.
https://brainly.com/question/11231920
#SPJ1
identify an expression for the equilibrium constant of each chemical equation. part a part complete sf4(g)⇌sf2(g) f2(g)]
The equilibrium constant expression is Kc = [SF2][F2] / [SF4].
How equilibrium constant expression for chemical equation SF4(g) ⇌ SF2(g) + F2(g) be represented?The equilibrium constant is a fundamental concept in chemical equilibria that describes the relative concentrations of reactants and products at equilibrium. It is a dimensionless quantity that is used to indicate the position of equilibrium and the extent to which a reaction proceeds.
In the case of the chemical equation SF4(g) ⇌ SF2(g) + F2(g), the equilibrium constant expression is Kc = [SF2][F2] / [SF4]. This expression indicates that the equilibrium constant is equal to the product of the concentrations of the products (SF2 and F2) raised to their stoichiometric coefficients, divided by the concentration of the reactant (SF4) raised to its stoichiometric coefficient.
The equilibrium constant provides information about the direction in which a reaction proceeds. If Kc > 1, the reaction favors the products, and if Kc < 1, the reaction favors the reactants. If Kc = 1, the concentrations of reactants and products are equal at equilibrium.
The value of the equilibrium constant depends on the temperature and pressure of the system. Changes in these parameters can shift the position of equilibrium and alter the value of Kc. For example, an increase in temperature can favor the endothermic reaction by shifting the equilibrium to the right, resulting in an increase in the concentration of products and a corresponding increase in the value of Kc.
In summary, the equilibrium constant is a useful tool for predicting the position of equilibrium and the extent to which a reaction proceeds. It provides valuable information for understanding chemical equilibria and is essential for designing chemical processes and predicting their outcomes.
Learn more about equilibrium constant
brainly.com/question/10038290
#SPJ11
What is the proeutectoid phase for an iron–carbon alloy in which the mass fractions of total ferrite and total cementite are 0.90 and 0.1, respectively?
The proeutectoid phase for an iron-carbon alloy with mass fractions of 0.90 total ferrite and 0.10 total cementite is ferrite.
To explain, in an iron-carbon alloy system, the proeutectoid phase is the phase that forms before the eutectoid reaction occurs. The eutectoid reaction happens at 0.76 wt% carbon in the iron-carbon phase diagram.
In this specific alloy, the mass fractions are 0.90 total ferrite and 0.10 total cementite, which means that the alloy has a lower carbon content compared to the eutectoid composition (less than 0.76 wt% carbon).
Since ferrite is the stable phase at lower carbon concentrations, the proeutectoid phase for this alloy is ferrite. The microstructure will mainly consist of ferrite, with some small amounts of cementite dispersed within it.
To know more about proeutectoid phase click on below link:
https://brainly.com/question/15937103#
#SPJ11
What is the effect of the structure of the alkyl halide on SN1 andSN2 reactivity?
Compare simple primary, secondary, and tertiary alkylhalides. Compare unhindered
primary and hindered primary alkyl halides. Compareunhindered primary and allylic
primary alkyl halides.
Alkyl halide structure affects SN₁ and SN₂ reactivity. Simple primary are highly reactive in SN₂, while tertiary are highly reactive in SN₁. Hindered primary exhibit slower SN₂ due to steric hindrance, while unhindered primary have faster SN₂.
SN₂ and SN₁ reactions are two important types of nucleophilic substitution reactions that are commonly observed in organic chemistry. In SN₂ reactions, the nucleophile attacks the alkyl halide at the same time as the leaving group departs, resulting in a concerted reaction. In contrast, SN₁ reactions involve the formation of a carbocation intermediate before the nucleophile attacks.
The reactivity of alkyl halides towards SN₂ reactions increases with increasing accessibility of the halogen atom to the nucleophile. Thus, simple primary alkyl halides with a small alkyl group and a reactive halogen atom are highly reactive towards SN₂ reactions.
On the other hand, bulky tertiary alkyl halides with a less reactive halogen atom are highly reactive towards SN₁ reactions, as the carbocation intermediate can stabilize the charge through resonance or inductive effects.
In the case of primary alkyl halides, the presence of steric hindrance can slow down the SN₂ reaction. Thus, hindered primary alkyl halides exhibit a slower SN₂ reaction due to steric hindrance, while unhindered primary alkyl halides have a faster SN₂ reaction.
To know more about Alkyl halide structure, refer here:
https://brainly.com/question/17063582#
#SPJ11
calculate the poh of a solution that results from mixing 45.8 ml of 0.15 m ethylamine (c2h5nh2) with 16.5 ml of 0.13 m c2h5nh3cl. the kb value for c2h5nh2 is 6.5 x 10-4.
The pH of the solution is 10.32.
What is the pH of the solution?The first step is to write the chemical equation for the reaction between ethylamine and its conjugate acid, ethyl ammonium chloride:
C2H5NH2 + HCl → C2H5NH3+Cl-
Next, we need to determine the initial concentration of ethylamine and the concentration of ethyl ammonium chloride:
initial concentration of C2H5NH2 = 0.15 M x (45.8 mL / 62.3 mL) = 0.110 M
concentration of C2H5NH3+Cl- = 0.13 M x (16.5 mL / 62.3 mL) = 0.035 M
Now we can use the Kb value of ethylamine to calculate the concentration of hydroxide ions:
Kb = [C2H5NH2][OH-] / [C2H5NH3+]
[OH-] = Kb x [C2H5NH3+] / [C2H5NH2] = (6.5 x 10^-4) x (0.035) / (0.110) = 2.085 x 10^-4 M
Finally, we can use the concentration of hydroxide ions to calculate the pOH and then the pH:
pOH = -log[OH-] = -log(2.085 x 10^-4) = 3.68
pH + pOH = 14, so:
pH = 14 - pOH = 14 - 3.68 = 10.32
Therefore, the pH of the solution is 10.32.
Learn more about ethyl
brainly.com/question/4439718
#SPJ11
use the drop‑down menus to label the statements as either true of false. sodium hydroxide can cause severe damage to skin and eyes.
The statement "Sodium hydroxide can cause severe damage to skin and eyes" is true. Sodium hydroxide is a highly corrosive substance and can cause burns, irritation, and damage when it comes into contact with the skin or eyes.
Sodium hydroxide is a highly caustic compound that can cause significant damage to the skin and eyes upon contact. The severity of the damage depends on the concentration of the sodium hydroxide solution, the duration of exposure, and the amount of skin or eye tissue affected. Sodium hydroxide reacts with the fats and oils in the skin and eyes, leading to the formation of soap-like substances called "salts of fatty acids." These salts can cause significant tissue damage, leading to pain, redness, swelling, and blistering.
Learn more about Sodium hydroxide: https://brainly.com/question/30460434
#SPJ11
From the following data, calculate the pressure of hydrogen gas generated by the reaction of magnesium metal and hydrochloric acid during the Ideal Gas Law experiment. Patm = Pl.0() + PL. () Vapor Pressure of Water at Various Temperatures Temperature (°C) PH20 (torr) 20.0 21.0 17.5 18.7 22.0 19.3 Mass Mg = 0.037 g VH2(9) = 37.4 mL TH2(g) = 22.0°C Atmospheric pressure = 761.6 torr 1 atm = 760 mmHg = 760.0 torr Select one: 0.9732 atm 0.97 atm 1.028 atm 0.9767 atm 1.0 atm
The pressure of hydrogen gas generated by the reaction of magnesium metal and hydrochloric acid during the Ideal Gas Law experiment is 0.9767 atm.
To calculate the pressure of hydrogen gas, we need to use the Ideal Gas Law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin. We can rearrange this equation to solve for P: P = nRT/V.
First, we need to calculate the number of moles of hydrogen gas generated by the reaction. The balanced equation for the reaction is:
Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)
From the mass of magnesium used, we can calculate the number of moles of magnesium:
n(Mg) = m/M(Mg) = 0.037 g / 24.31 g/mol = 0.00152 mol
Since the reaction produces 1 mole of hydrogen gas for every mole of magnesium, we know that the number of moles of hydrogen gas produced is also 0.00152 mol.
Next, we need to calculate the volume of hydrogen gas produced. The volume of hydrogen gas collected was 37.4 mL, which is equivalent to 0.0374 L.
Now, we can substitute the values we have calculated into the Ideal Gas Law equation and solve for P:
P = nRT/V = (0.00152 mol)(0.08206 L atm/K mol)(295.15 K)/(0.0374 L) = 1.028 atm
However, this value is the pressure of hydrogen gas relative to the atmospheric pressure. We need to subtract the vapor pressure of water at the given temperature from the atmospheric pressure to get the pressure of hydrogen gas relative to a vacuum:
Patm - PH2O = PVacuum
From the table of vapor pressures, we can find that the vapor pressure of water at 22.0°C is 19.3 torr.
Therefore, the pressure of hydrogen gas generated by the reaction of magnesium metal and hydrochloric acid during the Ideal Gas Law experiment is:
Patm - PH2O = PVacuum
(761.6 torr - 19.3 torr) / 760.0 torr/atm = 0.9767 atm
learn more about ideal gas law here:
https://brainly.com/question/28257995
#SPJ11
The pressure of hydrogen gas generated by the reaction of magnesium metal and hydrochloric acid during the Ideal Gas Law experiment is 0.9767 atm.
To calculate the pressure of hydrogen gas, we need to use the Ideal Gas Law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin. We can rearrange this equation to solve for P: P = nRT/V.
First, we need to calculate the number of moles of hydrogen gas generated by the reaction. The balanced equation for the reaction is:
Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)
From the mass of magnesium used, we can calculate the number of moles of magnesium:
n(Mg) = m/M(Mg) = 0.037 g / 24.31 g/mol = 0.00152 mol
Since the reaction produces 1 mole of hydrogen gas for every mole of magnesium, we know that the number of moles of hydrogen gas produced is also 0.00152 mol.
Next, we need to calculate the volume of hydrogen gas produced. The volume of hydrogen gas collected was 37.4 mL, which is equivalent to 0.0374 L.
Now, we can substitute the values we have calculated into the Ideal Gas Law equation and solve for P:
P = nRT/V = (0.00152 mol)(0.08206 L atm/K mol)(295.15 K)/(0.0374 L) = 1.028 atm
However, this value is the pressure of hydrogen gas relative to the atmospheric pressure. We need to subtract the vapor pressure of water at the given temperature from the atmospheric pressure to get the pressure of hydrogen gas relative to a vacuum:
Patm - PH2O = PVacuum
From the table of vapor pressures, we can find that the vapor pressure of water at 22.0°C is 19.3 torr.
Therefore, the pressure of hydrogen gas generated by the reaction of magnesium metal and hydrochloric acid during the Ideal Gas Law experiment is:
Patm - PH2O = PVacuum
(761.6 torr - 19.3 torr) / 760.0 torr/atm = 0.9767 atm
learn more about ideal gas law here:
https://brainly.com/question/28257995
#SPJ11
what happens to the solubility of caf2 in water if 0.1 m hno3 is added to the solution at 298 k? (ksp = 4.0 x 10−11)
*shrug
Adding HNO3 to a solution of CaF2 and water will increase the concentration of H+ ions in the solution, according to the following reaction:
HNO3 + H2O ⇌ H3O+ + NO3-
The increased concentration of H+ ions will shift the equilibrium of the dissociation reaction of CaF2 in the opposite direction, making it less soluble. The dissociation reaction of CaF2 is as follows:
CaF2(s) ⇌ Ca2+(aq) + 2F-(aq)
The solubility product constant expression for CaF2 is:
Ksp = [Ca2+][F-]^2
If the solubility of CaF2 is S, then at equilibrium, [Ca2+] = S and [F-] = 2S. Therefore,
Ksp = S * (2S)^2 = 4S^3
Now, if 0.1 M HNO3 is added to the solution, it will increase the H+ ion concentration, which will shift the dissociation equilibrium of CaF2 to the left, decreasing the solubility. The reaction can be written as:
CaF2(s) + 2H+(aq) ⇌ Ca2+(aq) + 2HF(aq)
The equilibrium expression for this reaction is:
K = [Ca2+][HF]^2/[H+]^2
At equilibrium, the concentrations of Ca2+ and HF will be less than S, and the concentration of H+ will be 0.1 M. We can use the solubility product constant and the equilibrium expression to solve for the new solubility:
K = [Ca2+][HF]^2/[H+]^2
4.0 x 10^-11 = (S - x)(2S - 2x)^2/(0.1)^2
Solving for x, we get x = 2.9 x 10^-5 M
Therefore, the new solubility of CaF2 in the presence of 0.1 M HNO3 is S - x = 1.0 x 10^-6 M.
*IG:whis.sama_ent*
*shrug
Adding HNO3 to a solution of CaF2 and water will increase the concentration of H+ ions in the solution, according to the following reaction:
HNO3 + H2O ⇌ H3O+ + NO3-
The increased concentration of H+ ions will shift the equilibrium of the dissociation reaction of CaF2 in the opposite direction, making it less soluble. The dissociation reaction of CaF2 is as follows:
CaF2(s) ⇌ Ca2+(aq) + 2F-(aq)
The solubility product constant expression for CaF2 is:
Ksp = [Ca2+][F-]^2
If the solubility of CaF2 is S, then at equilibrium, [Ca2+] = S and [F-] = 2S. Therefore,
Ksp = S * (2S)^2 = 4S^3
Now, if 0.1 M HNO3 is added to the solution, it will increase the H+ ion concentration, which will shift the dissociation equilibrium of CaF2 to the left, decreasing the solubility. The reaction can be written as:
CaF2(s) + 2H+(aq) ⇌ Ca2+(aq) + 2HF(aq)
The equilibrium expression for this reaction is:
K = [Ca2+][HF]^2/[H+]^2
At equilibrium, the concentrations of Ca2+ and HF will be less than S, and the concentration of H+ will be 0.1 M. We can use the solubility product constant and the equilibrium expression to solve for the new solubility:
K = [Ca2+][HF]^2/[H+]^2
4.0 x 10^-11 = (S - x)(2S - 2x)^2/(0.1)^2
Solving for x, we get x = 2.9 x 10^-5 M
Therefore, the new solubility of CaF2 in the presence of 0.1 M HNO3 is S - x = 1.0 x 10^-6 M.
*IG:whis.sama_ent*
what is the difference between a solute and a solvent???????? :)
A solvent is a substance which is present in larger amount in the solution.
A solute is the the substance which is present in lesser amount in the solution.
EXAMPLE:-
In the salt-water solution, water is the solvent and salt is the solute
hope it helps! byeeee
Answer:
Let me explain this to you with a simple example:-
Let's take Water and Salt,
When we mix both water and salt we get a solution.
Salt gets dissolved in water. Therefore, the substance which gets dissolved is called the solute. So here, Salt is the solute.
Water is dissolving the salt. Therefore, the substance that is dissolving the solute is called the solvent.
Solute + Solvent = Solution
Background info:
How Airbags Work
Let’s call it “engineered violence.” Airbags may seem soft and cuddly as long as they’re packed away in your steering wheel, dashboard, seats, or pillars, but what makes them work is their ability to counteract the violence of a collision with a structured sort of violence of their own. Every airbag deployment is literally a contained and directed explosion.
“We don’t like to use the word ‘explosion’ around here,” claims Ken Zawisa, the global airbag engineering specialist responsible for frontal airbag strategies at GM. “But it is a very fast, well-controlled chemical reaction. And heat and gas are the result.” The term “airbag” itself is misleading since there’s no significant “air” in these cushions. They are, instead, shaped and vented nylon-fabric pillows that fill, when deployed, with nitrogen gas. They are designed to supplement seatbelt restraints and help distribute the load exerted on a human body during an accident to minimize the deceleration rate and likelihood of injury. But while “supplement the seatbelt” is the mission of airbags, federal regulations require that they be tested and made effective for unbelted occupants, vastly complicating their task. Airbags must do their work quickly because the window of opportunity—the time between a car’s collision into an object and an occupant’s impact into the steering wheel or instrument panel—lasts only milliseconds.
The image attached is a data chart.
sceintific question is: How does the choice of chemical ingredient in airbags influence their effectiveness.
Instructions: Briefly explain the experiment in the context of the purpose presented. In a general way write what was did to learn more and answer the scientific question. Incorporate your background research in the context of explaining the goal and the procedure-to provide the audience with more information so they'll be able to better understand the experimental procedure and results. Youll need to explain what was done in the experiment. As you explain the reader may need to know what special, technical words mean or they need other conceptual background information.
The choice of chemical ingredient in airbags has a significant influence on their effectiveness. The inflation medium (gas) used must be able to rapidly generate high pressures to quickly inflate the airbag, while also being stable and non-reactive to prevent undesirable chemical reactions that could potentially rupture the airbag.
Nitrogen gas is commonly used because it meets these criteria well. It is inert, non-toxic, and storable as a compressed gas. When the inflator is activated in a crash, the nitrogen gas is released and rapidly fills the airbag, dispersing the force on the occupant over a larger area. The faster the airbag inflates, the less force is exerted on the body at any given moment.
Researchers conducted experiments to test different inflation media and inflator designs. They tested airbags filled with nitrogen gas, argon gas, helium gas, and compressed air (mixture of nitrogen and oxygen). They measured the inflation rate of the airbags as well as the maximum pressure reached. They also tested different inflator designs, including pyrotechnic inflators that generate gas from a chemical explosion, as well as hybrid inflators that combine a small amount of fuel and an oxidizer to heat the inflation medium.
The results showed that nitrogen gas achieved the fastest inflation rates and highest maximum pressures compared to the other options. Pyrotechnic inflators also outperformed hybrid inflators in inflation speed. Based on these findings, nitrogen gas has become the industry standard for airbag inflation medium, and pyrotechnic inflators are the most commonly used inflator designs. By optimizing the chemical reaction and gas used, airbags have been able to achieve much faster inflation speeds, better dispersing the force on occupants during a crash. This has greatly improved occupant safety and demonstrates the key role that chemistry plays in enabling the effectiveness of airbags.
Does this help explain how the choice of chemical ingredient influences airbag effectiveness? Let me know if you have any other questions!
2 nh3 (g) heat ⇌ n2(g) 3 h2 (g) change: increase in temperature what is the effect on the concentration of [n2]
The effect on the concentration of [N2] is that it will increase. The concentration of [NH3] and [H2] will decrease as they are consumed in the forward reaction.
In this reaction, you have:
2 NH₃(g) + heat ⇌ N₂(g) + 3 H₂(g)
The reaction is endothermic, meaning it absorbs heat. When the temperature increases, according to Le Chatelier's principle, the reaction will shift to the side that absorbs the heat to maintain equilibrium. In this case, it will shift to the right.
Effect on the concentration of [N₂]:
1. Increase in temperature.
2. Reaction shifts to the right (towards the side that absorbs heat).
3. Concentration of N₂(g) increases.
This is a question about the Le Chatelier’s principle, which states that when a system at equilibrium is disturbed by a change in a factor such as temperature, pressure, or concentration, the system will shift its equilibrium position to counteract the change and restore equilibrium. In this case, the change is an increase in temperature. Since the reaction is endothermic (heat is absorbed), increasing the temperature will favor the forward reaction and produce more products. Therefore, the effect on the concentration of [N2] is that it will increase. The concentration of [NH3] and [H2] will decrease as they are consumed in the forward reaction.
to learn more about concentration click here:
brainly.com/question/30639206
#SPJ11
Select the route that would most likely produce the desired results from the given starting material. Br I. () H2SO4 and heat;(2) HBr II. (1) KOH in ethanol: (2) HBr II. (1)H SO4 and heat: (2) HBr+ peroxides IV. (1) potassium tert-butoxide in tert-butanol; (2) HBr+ peroxides A) I B) II C) IIID. IV
The desired product is HBr, and it can be obtained from Br2 using different methods.
what the route that would most likely produce the desired results from the given starting material? A: Br2 + H2SO4 and heatThis reaction does not produce HBr. Instead, it produces SO2, Br2, and H2O. Therefore, this route would not produce the desired results.
B: Br2 + KOH in ethanolThis reaction produces KBr and H2O, but not HBr. Therefore, this route would not produce the desired results either.
Option D, which involves the use of potassium tert-butoxide in tert-butanol and HBr with peroxides to produce HBr from Br2
C: Br2 + H2SO4 and heat + peroxidesThis reaction produces HBr, but it can be hazardous because peroxides can cause an explosive reaction. Therefore, this route is not recommended unless the peroxides are handled with caution.
D: Br2 + potassium tert-butoxide in tert-butanol + HBr + peroxidesThis reaction produces HBr and is a reliable method for obtaining it. However, it also involves the use of peroxides, which can be hazardous.
Overall, the most suitable route for obtaining HBr from Br2 is Option D, using potassium tert-butoxide in tert-butanol and HBr with peroxides. It is essential to handle the peroxides with caution and follow proper safety procedures to avoid accidents.
Learn more about HBr
brainly.com/question/29795378
#SPJ11
25. The reaction catalyzed by the enzyme aldolase has a G˚' ≈ +23 kJ/mol. In muscle cells, the reaction proceeds in this same, forward direction. How can this occur?
a. This G˚' means it is thermodynamically favored.
b. The enzyme changes the ∆G of the reaction in cells to something favorable.
c. The concentration of reactant(s) must be significantly greater than product(s) in cells.
d. The concentration of product(s) must be significantly greater than reactant(s) in cells.
In muscle cells, the reaction proceeds in the same way when enzyme changes the ∆G of the reaction in cells to something favorable. Option B is correct.
The fact that the reaction catalyzed by aldolase has a positive standard free energy change (∆G˚' ≈ +23 kJ/mol) indicates that the reaction is thermodynamically unfavored under standard conditions. However, in muscle cells, the reaction proceeds in the forward direction, indicating that the actual free energy change (∆G) of the reaction in cells is negative.
The most likely explanation for this is that the enzyme aldolase catalyzes the reaction in such a way that it lowers the activation energy required for the reaction to proceed, making it kinetically favorable. This does not change the thermodynamics of the reaction, but it allows the reaction to occur at a reasonable rate.
Hence, B. is the correct option.
To know more about free energy change here
https://brainly.com/question/14562388
#SPJ4