What is the acceleration of a car moving at the same speed and in the same direction?

Answer:

[tex]m_{O_2}=120gO_2[/tex]

Explanation:

Hello!

In this case, since the decomposition of potassium chlorate is:

[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]

We can see a 2:3 mole ratio between potassium chlorate and oxygen (molar mass 32.0 g/mol), thus, via stoichiometry, we compute the mass of oxygen that are produced by the decomposition of 2.50 moles of this reactant:

[tex]m_{O_2}=2.50molKClO_3*\frac{3molO_2}{2molKClO_3} *\frac{32.0gO_2}{1molO_2}\\\\m_{O_2}=120gO_2[/tex]

Best regards!

Answer:

slower

Explanation:

NBS is used in place of Br2 during bromination because the use of Br2 tends to result in the formation of a large concentration of the addition product.  This is because, the Br2 interacts with the double bond to yield only the dibromide (addition product).

The usefulness of NBS lies in the fact that it provides a lower concentration of Br2, and such that the rate addition is slower than the chain propagation steps. Only the monobromination product is observed

The low concentration of Br2 allows the free-radical reaction to out-compete the alkene addition reaction.

Answer:

Gas (B)

Explanation:

The answer option which is not a necessary input for the process of photosynthesis is: D. [tex]O_2[/tex] (oxygen)

Photosynthesis can be defined as a biological and chemical process through which living organisms such as green plants, transform light energy (sunlight) into chemical energy.

Basically, both sunlight, carbon dioxide ([tex]C0_2[/tex]) and water ([tex]H_2O[/tex]) contained in the Earth's atmosphere plays a significant role in photosynthesis because they serve as an input.

Hence, the necessary input for the process of photosynthesis to take place include the following:

In conclusion, [tex]O_2[/tex] (oxygen) is an end product (output) of photosynthesis rather being an input.

Read more: https://brainly.com/question/12827458

Answer:

Titration is a technique to determine the concentration of an unknown solution. As illustrated in the titration setup above, a solution of known concentration (titrant) is used to determine the concentration of an unknown solution (titrand or analyte).

Typically, the titrant (the solution of known concentration) is added through a burette to a known volume of the analyte (the solution of unknown concentration) until the reaction is complete. Knowing the volume of titrant added allows us to determine the concentration of the unknown analyte. Often, an indicator is used to signal the end of the reaction, the endpoint. Titrant and analyte is a pair of acid and base. Acid-base titrations are monitored by the change of pH as titration progresses.

Let us be clear about some terminologies before we get into the discussion of titration curves.

Answer:

Mass = 185.896 g

Explanation:

Given data:

Mass in gram = ?

Number of moles = 2.00 mol

Solution:

Formula:

Number of moles = mass/molar mass

Molar mass of cobalt (I) hydroxide =92.948 g/mol

by putting the values,

2.00 mol = Mass/92.948 g/mol

Mass = 2.00 mol × 92.948 g/mol

Mass = 185.896 g

Answer:

c. Voltmeter

Explanation:

PLATO LIVES MATTER

Answer:+178

Explanation:

The heat of the reaction for the following reactions is 178 kJ. the correct option is D.

The heat that is added or removed during a chemical reaction is called the heat of reaction.

It is also called the enthalpy of the reaction.

The heat is absorbed or released to maintain the temperature of the reaction.

The enthalpy can be calculated by subtracting the enthalpy of the product from the enthalpy of the reactant.

Thus, the correct option is D.

Learn more about the heat of the reaction

https://brainly.com/question/517776

Answer:

C6H6 has the strongest intermolecular force

i think

Answer:

H2O

Explanation:

Because it is a hydrogen bond which is said to be the strongest bond between the H and a N,O, or F combination

Answer:

AlCl3 and Ag

Explanation:

Edge 2020

The products formed when aluminum is added to a silver chloride solution are "AlCl3 and Ag".

The reaction of aluminum and silver chloride is a single substitution type of reaction that is expressed as follows: Al (s) + 3AgCl (aq) = AlCl3 (aq) + 3Ag (s)When aluminum is added to the silver chloride solution, the cations are exchanged in the process forming AlCl3 and Ag.

Learn more about chemical reactions

https://brainly.com/question/26018275

#SPJ2

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question we have

[tex]volume = \frac{3.50}{5.61} \\ = 0.6238859...[/tex]

We have the final answer as

Hope this helps you

Answer:

3.44 × 10⁻²⁰ g Na

General Formulas and Concepts:

Chemistry - Atomic Structure

Explanation:

Step 1: Define

900 atoms Na

Step 2: Identify Conversions

Avogadro's Number

Molar Mass of Na - 22.99 g/mol

Step 3: Convert

[tex]900 \ atoms \ Na(\frac{1 \ mol \ Na}{6.022 \cdot 10^{23} \ atoms \ Na} )(\frac{22.99 \ g \ Na}{1 \ mol \ Na} )[/tex] = 3.4359 × 10⁻²⁰ g Na

Step 4: Check

We are given 3 sig figs. Follow sig fig rules and round.

3.4359 × 10⁻²⁰ g Na ≈ 3.44 × 10⁻²⁰ g Na

Answer:

mass of 1 molecule of CO2=44 g

mass of 2.71*10^22 of CO2=2.71*10^22*44=1.2*10^24g

now to convert grams into kilogram we know that

1000 g=1kg

1.2*10^24=1.2*10^24/1000=1.2*10^21

According to Avogadro's number concept,there are 1.979×10[tex]^-3[/tex] kilograms in 2.71 ×10²² molecules of CO₂.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number. Mass is calculated as, number of molecules/Avogadro's number×molar mass

Substitution in above formula gives, mass=2.71×10²²/6.023×10²³×44=1.979 g or 1.979×10[tex]^-3[/tex] kg.

Thus, there are  1.979×10[tex]^-3[/tex] kg in 2.71×10²² molecules of carbon dioxide.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ5

Answer:

You would expect it to go down

Explanation:

This is because she is essentially watering down, causing the Ph level to go down too.

If a student added water to her cola, then the pH level is low. This is due to the fact that she is essentially diluting, which lowers the pH level as well.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

pH stands for "Potential of Hydrogen" in its full form. The negative logarithm of the concentration of H+ ions is known as pH. As a result, the meaning of pH is defined as the strength or power of hydrogen.

A solution's pH is a significant indicator of its chemical composition. The pH can affect how readily available nutrients are, how biological processes work, how bacteria behave, and how chemicals behave.

Thus, If a student added water to her cola, then the pH level is low.

To learn more about pH, follow the link below;

https://brainly.com/question/491373

#SPJ2

Answer:

You didn't provide any statements. If it is an option, art is a form of expression. Something created from imagination that expresses the thoughts and emotions of the artist.

The statement that best answers the question: What is art is that—Art is a form of visual language. Therefore, the correct option is A.

Art is a diverse range of human activities and products that are created with the intention of expressing the imagination, emotions, or ideas, or to make a statement, in a visually appealing way.

Art can take many forms, including visual arts (such as painting, sculpture, and photography), performing arts (such as music, dance, and theater), and literary arts (such as poetry and prose).

It is typically seen as a form of communication and can be used to convey ideas, emotions, or political, social or cultural messages. It can also be used to simply evoke a response or emotion in the viewer, or to create a sense of beauty or aesthetic enjoyment. Therefore, the correct option is A.

Learn more about art, here:

https://brainly.com/question/8861182

#SPJ6

The question is incomplete, but most probably the complete question is,

Which of these statements best answers the question: What is art?

A. Art is a form of visual language.

B. Art is a form of written language.

C. Art is a form of spoken language.

D. Art is a form of dance language.

Answer:

2) (s)

3) PbBr2

Explanation:

2) This is a precipitation rxn which means if forms a solid, We use (s) for solid.

3) Refer to solubility table

Answer:

The types of cells at work in the human body

Explanation:

Rudolf Virchow was a German physician who is known as the father of modern pathology. He contributed to the development of the cell theory by concluding that all cells come from preexisting cells. This led to the conclusion that diseases occur at the cellular level, which allowed scientists to diagnose diseases more accurately.

Considering that Virchow analyzed human cells, the image that Tumu would be most likely to use in his assignment is the one of the types of cells at work in the human body.

Answer:

D the way root cells reproduce to increase root length

Explanation:

Have a good day!

Answer:

D. Hurricanes form as a result of rising warm air and circulating winds​

Explanation:

Answer:  mass = 485 grams approximately

=======================================================

Work Shown:

First we need the volume of the block

volume = (length)*(width)*(height)

volume = (4.22)*(3.62)*(1.41)

volume = 21.539724

volume = 21.5 cubic cm

I'm rounding to three sig figs because each of the dimensions are to three sig figs.

--------------------------

Now turn to the formula

density = mass/volume

This can be rearranged to

mass = density*volume

Plug in the given density and the volume we found earlier to get

mass = density*volume

mass = (22.57)*(21.5)

mass = 485.255

mass = 485 grams

I'm rounding to three sig figs because it's the smaller sig fig count of 22.57 and 21.5

Answer:

D

Explanation:

Answer:

Molecular

Explanation:

Using the rules for the nomenclature for naming binary covalent (molecular) compounds, the compound SO3 is named sulfur trioxide. The prefix tri- indicates that the oxygen has a subscript of 3 and that a molecule of sulfur trioxide has three oxygen atoms.

Answer:

From the numerical steps highlighted under explanation, the average atomic mass of bromine is 79.91 u

Explanation:

The steps to be taken will involve;

1) Find the number of isotopes of bromine.

2) Identify the atomic mass and relative abundance of each of the isotopes.

3) Multiply the atomic mass of each of the isotopes by their corresponding values relative abundance value.

4) Add the value in step 3 above to get the average atomic mass of bromine.

Now;

Bromine has 2 isotopes namely;

Isotope 1: Atomic mass = 78.92amu and a relative abundance of 50.69%.

Isotope 2: Atomic mass = 80.92amu and a relative abundance of 49.31%.

Using step 3 above, we have;

(78.92 × 50.69%)

And (80.92 × 49.31%)

Using step 4 above, we have;

(78.92 × 50.69%) + (80.92 × 49.31%) ≈ 79.91 u

The atomic mass of bromine has been calculated as 79.9062 amu.

The relative atomic mass of the element has been given as the mass of each isotope with respect to their abundance.

The atomic mass has been given as:

[tex]amu=\sum mass\;\times\;\% Abundance[/tex]

The available isotopes of Bromine have been:

Isotope 1 = 78.92 amu, and 0.5069 % abundance

Isotope 2= 80.92 amu, and 0.4931 % abundance

Submitting the values for the atomic mass unit of bromine ([tex]amu_{\text{Br}}[/tex]):

[tex]amu_{\text {Br}}= (78.92\;\times\;0.5069)\;+\;(80.92\;\times\;0.4931)\\amu_{\text{Br}}=40.0045\;+\;39.9016\\amu_{\text{Br}}=79.9062[/tex]

The atomic mass of bromine has been calculated as 79.9062 amu.

For more information about atomic mass, refer to the link:

https://brainly.com/question/5566317

actual yield = 0.182 mole

theoretical yield : 0.484 mole

percentage mole(% yield)=37.6%

Percent yield is the comparison of the amount of product obtained from a reaction with the amount you calculated

General formula:

Percent yield = (Actual yield / theoretical yield )x 100%

An actual yield is the amount of product actually produced by the reaction. A theoretical yield is the amount of product that you calculate from the reaction equation according to the product and reactant coefficients

Reaction

Fe₂O₃+3C⟶2Fe+3CO

a. actual yield of Fe mole

10.2 g produced

[tex]\tt mol~Fe=\dfrac{10.2}{56}=0.182[/tex]

b. percentage mole and theoretical yield

0.242 mol Fe₂O₃ = 2 x 0.242 mol Fe = 0.484 mol (theoretical yield)

percentage yieldpercentage mole)

[tex]\tt \dfrac{0.182}{0.484}=0.376=37.6\%[/tex]

Answer:

C

Explanation:

Answer:

453.031g

Explanation:

atomic mass (molar mass)- 196.97g/m

2.3(196.97)=453.031

Answer:

pH = 4.79

Explanation:

The equilibrium of benzoic acid, BH, is:

BH ⇄ B⁻ + H⁺

Where B⁻ is benzoate anion

Where the dissociation equilibrium, Ka, is:

Ka = 6.46x10⁻⁵ = [B⁻] [H⁺] / [BH]

If 20.0% is B⁻, 80.0% is BH, replacing:

6.46x10⁻⁵ = [20.0%] [H⁺] / [80.0%]

1.615x10⁻⁵ = [H⁺]

As pH = -log [H⁺]