Answer:
Primary power in welding is often referred to as the input line voltage and amperage available to the welding machine from the shop’s main power line. It is often expressed in watts or kilowatts (KW) and is typically AC. It can be either single-phase or three-phase. None of the options you mentioned are correct definitions of primary power in welding.
When we are on an airplane, a little bit after takeoff, why do the engines suddenly sound like they’re reducing in power?
The sudden reduction in engine noise that passengers may notice after takeoff is a normal part of the takeoff process and is done to make the flight more efficient and comfortable.
Here is the principle behind flightThe sudden reduction in engine noise or thrust that passengers sometimes hear and feel shortly after takeoff is due to a reduction in engine power as the airplane reaches a certain altitude and speed. This is a normal part of the takeoff process and is known as the "reduction in takeoff thrust" or "thrust reduction".
During takeoff, the aircraft's engines produce a high amount of thrust to get the airplane off the ground and up to a safe altitude. Once the airplane reaches a certain altitude and speed, the pilot reduces the engine power to a lower setting, which is more efficient and produces less noise. The reduction in power is often noticeable to passengers, as the noise and vibration from the engines decrease.
The exact timing of the thrust reduction can vary depending on the airplane type, airline procedures, and other factors. In some cases, the thrust reduction may occur shortly after takeoff, while in other cases, it may occur a few minutes later.
Learn more about airplanes here:
https://brainly.com/question/26868878
#SPJ1
Is big foot real? where does he live if it’s real?
Technician A says that the Walkaround Inspection is designed to be performed in an efficient
manner to save time and avoid potentially missing something.
Technician B says the Walkaround Inspection is designed to be performed in a counter-clockwise
direction around the vehicle, beginning at the driver's door checking door lock operation and
terminating at the front of the vehicle checking the headlight aim.
Who is right?
Select the correct option and click NEXT.
O A only
OB only
Both A and B
Neither A nor B
Neither Technician A nor Technician B is entirely correct regarding the Walkaround Inspection.
The Walkaround Inspection is a systematic procedure that aims to ensure the safety and proper functioning of a vehicle. It is not primarily designed to save time but rather to identify any potential issues or hazards. Efficiency is important, but it should not compromise thoroughness.
As for Technician B's statement, while it is common practice to perform the inspection in a specific order, such as starting at the driver's door and ending at the front of the vehicle, there is no strict requirement to follow a counter-clockwise direction. The order may vary depending on the individual or the organization's preferences.
In summary, the Walkaround Inspection should be performed diligently and without rushing, focusing on thoroughly examining various aspects of the vehicle for safety and functionality. It is important to prioritize accuracy and attention to detail rather than strictly adhering to specific time-saving techniques or a fixed direction.
For more questions on hazards, click on:
https://brainly.com/question/30090471
#SPJ8
Please help me with this
The spark-ignition-piston engine, also known as the Otto Cycle, is a type of internal combustion engine that is commonly used in automobiles, motorcycles, and small aircraft. It works by converting the chemical energy stored in the fuel into mechanical energy through a series of four strokes or cycles.
What are the cycles?These cycles are:
Intake Stroke: The piston moves downward, drawing in a mixture of air and fuel into the cylinder through the open intake valve.
Compression Stroke: The intake valve closes, and the piston moves upward, compressing the air-fuel mixture to a high pressure and temperature.
Power Stroke: A spark ignites the compressed mixture, causing a rapid expansion of gases that push the piston downward with great force. This is the stroke where the engine generates power.
Exhaust Stroke: The piston moves upward again, expelling the burned gases through the open exhaust valve.
These four strokes constitute a complete engine cycle, and the process repeats itself for every revolution of the crankshaft. In addition to these four strokes, there is a fifth step which is the charge preparation or "induction" step. During this step, the fuel and air mixture is prepared and delivered to the cylinder, either through a carburetor or a fuel injection system.
Overall, the Otto Cycle works by harnessing the energy released by the controlled explosion of the air-fuel mixture in the power stroke to generate rotational motion of the crankshaft, which can be transferred to the wheels of a vehicle or used to power other machinery. The efficiency and power output of the engine are affected by several factors, including the compression ratio, fuel quality, ignition timing, and exhaust system design.
Learn more about spark on;
https://brainly.com/question/30046932
#SPJ1
Technician A says that the purpose of the Pre-Delivery Service is to inspect and identify any
problems prior to the vehicle's delivery to the customer and to verify that the vehicle is
functionally and visually ready for delivery to the customer.
Technician B says that the Pre-Delivery Service is performed based upon the standards
published in a Pre-Delivery Service Bulletin specific to each vehicle model and model year.
Who is right?
Select the correct option and click NEXT.
A only
B only
Both A and B
Neither A nor B
Both Technician A and Technician B are correct.
The purpose of the Pre-Delivery Service is indeed to inspect and identify any problems before delivering the vehicle to the customer, ensuring that it is functionally and visually ready for delivery. This includes checking various components and systems to ensure they are in proper working order and that the vehicle meets the required standards.
Technician B is also correct in stating that the Pre-Delivery Service is performed based on the standards published in a Pre-Delivery Service Bulletin specific to each vehicle model and model year.
These bulletins provide detailed instructions and guidelines for conducting the pre-delivery service, outlining the specific checks, adjustments, and inspections that need to be performed on the vehicle.
Therefore, both technicians are accurate in their descriptions of the purpose and process of the Pre-Delivery Service. It is important to follow the prescribed standards and guidelines to ensure consistency and quality in preparing the vehicle for customer delivery.
For more questions on Pre-Delivery Service, click on:
https://brainly.com/question/31863805
#SPJ8