What is potential energy? Give an example please.

Answers

Answer 1

Answer:

Potential energy can be defined as the energy in a body due to its position

In simple terms potential energy is the energy at rest

Explanation: Examples ;

A spring has more potential energy when it is compressed or stretched.A steel ball has more potential energy raised above the ground than it has after falling to Earth.


Related Questions

lab report for physical and chemical changes??!

Answers

Answer:

[See Below]

Explanation:

✦ Physical Changes:

  ✧ Is when the form changes, but not the chemicals in that form.

  ✧ An example of this would be chopping wood. It's still wood but it's a different size now. It's easier to burn it since it's smaller.

✦ Chemical Changes:

  ✧ Is when the chemicals inside that form change to something else entirely

  ✧ An example would be an egg, when you cook the egg it can turn into being scrambled or fried. But you can't eat the raw egg until the chemicals change.

~Hope this helps Mate. If you need anything feel free to message me.

Answer:

Here is an example of the full report for this type of lab. Includes data table etc. I would suggest making some changes on wording prior to submission

Explanation:

Read the scenario, then answer the questions. A 2 kg ball is thrown upward with a velocity of 15 m/s. What is the kinetic energy of the ball as it is being thrown? J What is the potential energy of the ball when it gets to its maximum height just before falling back to the ground? J

Answers

Answer:

225 for both answers

Explanation:

The only reason i know this is because i got it wrong. 225

Answer:

225J on both of the questions.

A physical change is chemically the same after the experiment.
True
False

Answers

Answer: True

Explanation:

It is possible to make a buffer that functions well near pH 7 using citric acid, which contains only carboxylate groups. Explain. Drag the terms on the left to the appropriate blanks on the right to complete the sentences.a. decreaseb. increasec. repulsionsd. associatese. attractionsf. dissociate1. Successive deprotonations______the (−) charge density on the resulting anion.2.This results in unfavorable electrostatic_____between the carboxylate anions, which reduces the likelihood that a proton would_____.3. It is more favorable for the proton to remain bound to reduce unfavorable charge_______.

Answers

Complete Question

it is possible to make a buffer that functions well near pH 7 using citric acid, which contains only carboxylate groups. Explain. Drag the terms on the left to the appropriate blanks on the right to complete the sentences.

Words : decrease, increase, repulsion, associates, attractions, dissociate

1. Successive deprotonations -------------- the (−) charge density on the resulting anion.

2.This results in unfavorable electrostatic --------- between the carboxylate anions, which reduces the likelihood that a proton would ----------

3.it is more favorable for the proton to remain bound to reduce unfavorable charge----------- . .

Answer:

1

Successive deprotonations increase the (−) charge density on the resulting anion.

2

This results in unfavorable electrostatic repulsion between the carboxylate anions, which reduces the likelihood that a proton would dissociate

3

It is more favorable for the proton to remain bound to reduce unfavorable charge repulsion

Explanation:

Generally

Successive deprotonations decrease the (−) charge density on the resulting anion.

This because deprotonations means removal of positive charge

This results in unfavorable electrostatic repulsion between the carboxylate anions, which reduces the likelihood that a proton would dissociate

It is more favorable for the proton to remain bound to reduce unfavorable charge repulsion

List three different forms of potential energy

Answers

Answer:

Types of Potential Energy

Elastic Potential Energy. Anything that can act like a spring or a rubber band can have elastic potential energy. ...

Gravitational Potential Energy. There is a constant attractive force between the Earth and everything surrounding it, due to gravity. ...

Chemical Potential Energy.

(IF THIS HELPED CAN YOU GIVE ME A BRAINYLEST PLEASE?)

When sand is coated with a layer of trimethylhydroxysilane, (CH3)3SiOH, it repels water and can no longer get wet. Hydrophobic sand (aka, magic sand) is fun to play with, but it can also have useful applications in agriculture to reduce water consumption (Water Resour. Manag. 2010, 24, 2237–2246). Predict the geometry for the silicon atom in trimethylhydroxysilane.

The geometry of the silicon atom in trimethylhydroxysilane is:__________

Answers

Is that how it’s spell trimethyhydrosilane?

can someone please help me

Answers

astonishing, necessary

What is kinetic energy? Give an example please.

Answers

Kinetic energy is moving energy or the energy of motion.

If an object is moving like a rock rolling down

a mountain, we say the rock has kinetic energy.

Compare and contrast how are predation and parasitism similar how do they differ

Answers

Predation and Parasitism are similar in the way that the predator and parasite feed off the prey and host, and the prey and host generally are harmed in some way. However, a parasite is bound to the host, and can’t survive without it, while a predator can survive without just one specific prey.

How is the light emitted by an atom related to its electron configuration?A. Light is produced when an electron moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.B. Light is produced when an electron moves from a lower to a higher energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.C. Light is produced when a proton moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.D. Light is produced when a proton moves from a lower to a higher energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.

Answers

Answer:

Light is produced when an electron moves from a higher to a lower energy level. The color of the light (as we see it) depends on the amount of energy emitted by the electron.

Explanation:

According to the Bohr's model of the atom, energy is given out by an atom when an electron moves from a higher to a lower energy level. The energy of the emitted light is equal to the energy difference between the two energy levels.

Hence ;

∆E= E2 - E1

Where;

E2 = energy of the higher energy level

E1 = energy of the lower energy level.

By supplying light of various frequencies and observing the frequency/wavelength of light emitted by a particular atom, its electron configuration can be determined.

Please answer ASAP >_<



What does xylem do in a plant?
•transport food
•transport water
•prevent water loss
•perform photosynthesis

Answers

Answer:

The correct answer is B. Transport water.

Explanation:

I did this quiz. :)

Xylem transport water. Therefore, the correct option is option B among all the given options. The vascular tissue of plants called xylem.

What is xylem?

The vascular tissue of plants called xylem transports water plus dissolving minerals from the roots towards the rest of the plant while also offering structural support. The tracheary components, a collection of specialized, water-conducting cells, make up xylem tissue.

All vascular plants, along with the seedless club mosses, fern, horsetails, all angiosperms (flowering plants), and gymnosperms, include xylem in addition to phloem (tissue that transports glucose from the leaves to the rest of the plant) (plants with seeds unenclosed in an ovary). Xylem transport water.

Therefore, the correct option is option B.

To learn more about xylem, here:

https://brainly.com/question/15918718

#SPJ6

What is true about all uranium atoms?
They each have the same number of nuclear
particles.
They each have the same number of neutral
particles.
O They each have the same number of neutrons.
They each have the same number of protons.

Answers

Answer:

they each have the same number of protons

Answer:they each have the same number of protons

Explanation:

I just took the test

Reactants undergo chemical reaction to form products.this chemical equation represents one such reaction.the coefficient for one of the reactants or products is incorrect .which part of the chemical equation is incorrect

Answers

Answer:

Explanation:

The part of 10 O2 is wrong.

Explanation:

The correct equation can be written as follows:

2  C 4 H 10  +  13  O 2  →  8  C O 2  +  10  H 2 O

The equation was not balanced before.

For a balanced chemical reaction, the number of atoms before and after the reaction should be the same. This is because matter is neither created not destroyed in a reaction, It changes from one form to another through chemical reactions.

What volume of acetic acid of density 1.10g/cm3 is needed to react with 250 mL of 0.50M Stronuim hydroxide?

Answers

Answer:

[tex]V=13.6cm^3[/tex]

Explanation:

Hello,

In this case, given the reaction in which the acetic acid reacts with strontium hydroxide to yield water and strontium acetate:

[tex]2CH_3COOH+Sr(OH)_2\rightarrow Sr(CH_3COO)_2+2H_2O[/tex]

The first step here is to compute the moles of strontium hydroxide that are reacting given its volume in liters (0.250 L) and concentration:

[tex]n_{Sr(OH)_2}=0.50mol/L*0.250L=0.125molSr(OH)_2[/tex]

Next, considering the 1:2 mole ratio between the strontium hydroxide and the acetic acid (molar mass = 60 g/mol) we compute the grams of acid that are consumed:

[tex]m_{CH_3COOH}=0.125molSr(OH)_2*\frac{2molCH_3COOH}{1molSr(OH)_2} *\frac{60gCH_3COOH}{1molCH_3COOH}\\ \\m_{CH_3COOH}=15gCH_3COOH[/tex]

Then, by using the density of the acetic acid, we compute the volume:

[tex]V=\frac{m}{\rho}=\frac{15g}{1.10g/cm^3} \\ \\V=13.6cm^3[/tex]

Best regards.

The number 325.608 rounded to 3 significant figures is A) - 326 B) - 325.6 C) - 325.61 D) - 325 BRAINLIEST!!

Answers

Answer:

A.326

Explanation:

B is incorrect because that would be 4 significant figures.

C is incorrect because that would be 5 significant figures.

D is incorrect because, while it is 3 significant figures, it is rounding the .6 down which doesn't make sense. since it's .6 you should be rounding up not down.

D) - 325 I think or could possibly be B

Which would be an adaptation for living in the tundra?
I Need Help Asap

Answers

Answer:

Long fur

Explanation:

Long fur is an adaption for the tundra because it is cold and snowy in the tundra, so therefore long fur is an adaption

Answer:

thic long fur that  overs you

Explanation:

Someone pls help me I don’t know this one

Answers

I believe it’s B. Plants, grasshopper, snake, mushrooms. The other ones don’t follow the flow of the arrows/ don’t go the same way the arrows are pointed. I hope this helps

test results indicated a chemical change has taken place ​

Answers


Some signs of a chemical change are a change in color and the formation of bubbles. The five conditions of chemical change: color chage, formation of a precipitate, formation of a gas, odor change, temperature change.

A biochemical reaction will proceed in the direction as written if:_______a. ΔG > 0.b. ΔH > 0.c. ΔG = zero.d. ΔG < 0.e. ΔH < 0.

Answers

Answer:

ΔG < 0

Explanation:

The condition for spontaneity of a chemical reaction is that ∆G<0. Hence for any biochemical reaction to proceed as written, ∆G must have a negative value.

If ∆G >0, the reaction is not spontaneous and will not proceed as written. ∆G=0 means that the reaction has attained equilibrium.

please help me:) i need to show work too..

Answers

Answer:

1 0.005Km

2 3000mg

3 700 cm

5. 2500mm

6 0.0045

Explanation:

Calculate the millimoles of solute in 1.88 L of a 0.00713 M NaCN solution. millimoles:

Answers

Answer:

13.4 milimoles.

Explanation:

The following data were obtained from the question:

Volume = 1.88 L

Molarity = 0.00713 M

Millimoles of NaCN =?

Next, we shall determine the number of mole NaCN in the solution. This can be obtained as follow:

Molarity = mole /Volume

Volume = 1.88 L

Molarity = 0.00713 M

Mole of NaCN =?

Molarity = mole /Volume

0.00713 = moles of NaCN /1.88

Cross multiply

Mole of NaCN = 0.00713 × 1.88

Mole of NaCN = 0.0134 mole

Finally, we shall convert 0.0134 mole to Millimoles. This can be obtained as follow:

1 mole = 1000 millimoles

Therefore,

0.0134 mole = 0.0134 × 1000

0.0134 mole = 13.4 milimoles

Therefore, the millimoles of the solute, NaCN in the solution is 13.4 milimoles

Do molecules break or build from a solid to a liquid?

Answers

Answer:

they break

Explanation:

Molecules move more freely when it is a liquid state. To keep it a solid, it will bunch together.

Answer:

I think they break.

Explanation:

They do not build a solid to a liquid

Does standard enthalpy use net ionic equations?a. Trueb. False

Answers

Answer:

True

Explanation:

In an ionic reaction, the net ionic equation is used to calculate the standard enthalpy of reaction.

Hence the standard enthalpy of any ionic reaction can be obtained by considering its balanced net ionic reaction equation, hence the answer above.

A gas in a 6.2 mL cylinder has a pressure of 1.4 atmospheres. A piston is pushed in

until the gas volume is 3.1 mL, while the temperature remains constant. What's the

final pressure of the gas in the cylinder?

A) 2.8 atm

B) 4.8 atm

C) 3.2 atm

OD) 5.6 atm

Answers

Answer:

A) 2.8 atm

Explanation:

Mike rides his motorcycle North at an average velocity of 20 meters/second for 500 seconds, how far did he ride?

Answers

Answer:

10000

Explanation:

Answer:10,000 meters

Explanation:20x500=10,000

Why enthalpy of combustion is always negative ?

Answers

Answer:

reason is Heat is involved, the reaction is exothermic and therefore heat is lost to the surrounding

What’s the symbol of the element that has 8 protons, 9 neutrons, and 8 electrons

Answers

Answer:

oxygen

Explanation:

 The given isotope has 8 protons and 8 electrons, so the atomic number of the given isotope is 8, which is the atomic number of oxygen.

which can be found on the periodic table: elements, compoumds or mixtures? pleaae help!!!!!!!!

Answers

Answer:

Elements

Explanation:

A compound: contains atoms of different elements chemically combined together in a fixed ratio.

A mixture: contain different elements and compounds but the ratio is not fixed nor are they combined via chemical bonds.

Answer:

elements can be found on a periodic table

what is the mass number of an atom or ion with one proton, two neutrons, and one electron?

Answers

Answer:

3

Explanation:

mass no.=protons+neutrons

mass no.=1+2=3


Can somebody help me please? it’s urgent

Answers

Answers:

See attached table

Explanation:

The isotope symbol will have the mass number and chemical symbol.  The atomic number will be equal to the number of protons because the atomic number is the number of protons in an atom.  The electrons will be equal to the protons because the atom is neutral.  The neutrons can be found by subtracting the number of protons from the mass number.  The mass number can be found by adding the protons and neutrons.  It is also in the name of the isotope.

Other Questions
If the length of rectangle is 8.26cm and its breadth is 5.5cm, the find thearea of the rectangle Combine like terms in the following expressions A. 10x 4x. B. 15n + 3n. C. 7.5y + 1.6y 2 D. m + 4 2m An object moves at a constant speed of 6 m/s. This means that the object: How does the Newsela article Health Benefits of Reading, Writing, Are Not Just for Patients" develop the central ideas that reading and writing are good for both self-help and in the medical setting? by citing research evidence and analyzing the results A .by linking different first-hand accounts to show how reading and writing are beneficial B.by suggesting that people who can use their imaginations creatively typically treat others better C.by explaining how they help people share their own feelings and understand those of others What is 3x=4+7 that. Is. My. Question Solve the equation x2 = 5. (3 + 4i) - (8 -5i) Write answer in standard form a +bi Group of answer choices A:-5+9i B:-5 + 9i Experiment 1: A scientist is interested in whether increasing the temperature when germinating seeds will decrease the amount of time it takes for germination. Pepper seeds in two equivalent germination rooms will be included in the study. One room is maintained at 85 degrees, the other room is left at the usual temperature of 75 degrees.- What is the independent variable, dependent variable, and control? *choices are 75 degree room, temperature, and germination rate What is the slope of the line that passes through the points (-4, 8) and (-14, 8) ? Julie has not started her essay that's due in a week and is feeling stressed because it's worth a lot of points. Which of the following pieces of advice would you NOT recommend? Three bags of jelly beans contain 26, 28, and 30 beans. The ratios of yellow beans to all beans in each of these bags are $50\%$, $25\%$, and $20\%$, respectively. All three bags of candy are dumped into one bowl. To the nearest percent, what is the percentage of yellow jelly beans in the bowl? Which of the following is the BEST way of staying objective when dealing with an emotional person?A.become emotional alsoB.insult their personalityC.compare their problems with othersD.listen carefully A police car drives for 11/12 hours with a constant speed of 84 mph and then for another 2 hours 15 minutes with a constant speed of 72 mph. What distance did it go? What vocabulary word describes a number that has a non-repeating/non-terminating decimal choose the inequality that express the set: The men who arrive in the night to pump Mildreds stomach have a casual indifference about their work. How many cases like this do they handle each night Community healthcare can provide all of the following EXCEPT: A. Primary care B. Urgent care C. Health insurance D. Heath education Different types of names given to explicit convertion in java You work for REV, Incorporated. Based on the documents provided, what does RPS most likely stand for? Where should the biosphere label appear in the system model? Use reasoning to explain your answer.