What is meant by denser medium?​

Answer:

Explanation:

Speed and velocity are not the same thing, as I'm sure you have determined while in physics. To find the average speed, we add the total distance run by Kiran and divide that total number of meters by the number of seconds it took to do this (just because I am going to state the speed and velocity in terms of m/s as opposed to m/min). To find the average velocity, we add the displacements together and divide by the total time. First the average speed:

[tex]s=\frac{150+150}{60}=\frac{300}{60}=5\frac{m}{s}[/tex]

Velocity has direction. If Kiran runs to the end of the road (which we will call positive) and then runs back to the start (that direction will be negative), then his displacement fits into the velocity equation as

[tex]v=\frac{150+(-150)}{60}=0[/tex] That means, even though he ran a lot and I'm sure he was very tired, his average velocity for the trip was 0 m/s. When velocity is 0, remember that that means that the total displacement was 0.

Answer:

b. Because the southern pole of the Earth's magnet is in the north.

Explanation:

This is very weird to think about but Earth's southern magnetic pole is in Earth's geographic north. So when compass points north, it is actually getting attracted to the southern magnetic pole (that is actually located in the north direction- geographic location- in earth).

Answer:

B energy can't be created or destroyed

Answer:

By increasing the perpendicular distance between the force and the pivot point

Explanation:

Due to the formula [tex]force * distance[/tex],

An increase in distance would cause the turning force to increase

Feel free to mark it as brainliest :D

Scientists use Atomic clock to measure time

Answer:

Meteorology

Explanation:

That is indeed the study of weather and climate.

Answer:

Chemical reactions occur slower at lower temperatures and faster at higher temperatures. When you put a glow stick in cold water, the chemical reaction slows down but will last for a longer period of time. When you put a glow stick in hot water, the reaction speeds up but will be over quicker.

Explanation:

(self-explanatory)

I hope this helps, have a nice day.

Answer:

use two marbles that are having the same mass.

Explanation:

An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).

This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.

Compare and contrast is used for the comparison of two or more things to show similarities and differences i.e how they are alike and different.

In this scenario, Emma compares the time it takes for a large marble and a small marble to roll down a slope.

In order to make his findings reliable, Emma should use two marbles that are having the same mass i.e two large marbles with the same mass and two small marbles with the same mass.

Mass can be defined as a measure of the amount of matter an object or a body comprises of. The standard unit of measurement of the mass of an object or a body is kilograms. Irrespective of the location of an object or a body at a given moment in time, the mass (amount of matter that they're made up of) is constant.

Answer:

Explanation:

Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .

R₁ = 3 x 4 / ( 3 + 4 )

= 12 / 7 = 1.7 ohms .

This equivalent resistance is connected with 4 ohms in series

Total resistance = 1.7 ohms + 4 ohms

= 5.7 ohms.

Hence effective resistance of the circuit = 5.7 ohms .

A : KE = 0 j & PE = 4 j

B : KE = 2 j & PE = 2 j

C : KE = 4 j & PE = 0 j

D : KE = 0 j & PE = 4 j

Answer:

Hey buddy this is the correct answer

Explanation:

A : KE = 0 j & PE = 4 j

B : KE = 2 j & PE = 2 j

C : KE = 4 j & PE = 0 j

D : KE = 0 j & PE = 4 j

HAVE A GREAT DAY<3

Answer:

Resistance

Explanation:

I believe it is air resistance but I could be wrong.

The question is fishing for "air resistance", but that's a mistake by whoever wrote the question.

"Free fall" means that gravity is the ONLY force on the body. If there's any air resistance, then it's not free fall.

Answer:

I think u are traeling at speed of light and not ur friend

Explanation:

Answer:

definition of matter is that matter takes up space and has mass

Answer:

From Ohms Law

V=IR

V=5volts

R=33.0hms

I=V/R

I= 5/330

=0.0152A

The current flowing through the cross-section of the resistor is 0.0152A.

Given the data in the question;

Ohm's law states that "the current flowing through the cross-section of a conductor is directly proportional to the voltage across it".

It is expressed as;

[tex]V = IR[/tex]

Where V is voltage, I is current and R is the Resistance.

To determine the current flowing through the resistor, we substitute our given values into the expression above.

[tex]V = IR\\\\I = \frac{V}{R}\\ \\I = \frac{5.00V}{330\ Ohm} \\\\I = 0.0152A[/tex]

Therefore, the current flowing through the cross-section of the resistor is 0.0152A.

Learn more about Electric current here: https://brainly.com/question/2264542

Answer:

Quads will have more energy

Explanation:

If the acceleration due to gravity increases from 9.81 to 15, then the velocity will increase as the rate of changing velocity i.e acceleration has increased from 9.81 to 15 m/s^2

With increase of velocity, the energy and force will also increase. Hence, the squad will require/have higher energy.

Answer:

here's an explanation but not the answer

please kindly send No or Yes understand.

Explanation:

A 10-N force is applied to push a block across a friction free surface for a displacement of 5.0 m to the right.

See Answer

See Answer

A 10-N frictional force slows a moving block to a stop after a displacement of 5.0 m to the right.

Answer:

C

Explanation:

Nitrogen and Oxygen donates electron to each other

Nitrogen and oxygen has the greatest chance of forming a covalent bond. Option C is correct.

Covalent bonds are chemical bonds that keep atoms of different elements together while sharing electrons.

Compounds can be polar covalent or nonpolar covalent, depending on the electronegativity variations between components.

The nitrogen family, Group 15, can react with oxygen in a variety of ways. Nonmetallic elements include nitrogen and phosphorus and oxygen.

Ionic bonds often occur between a metal and a nonmetal. Covalent bonds are most commonly formed between two nonmetals.

Nitrogen and oxygen has the greatest chance of forming a covalent bond from given a pair of atoms.

Hence,option C is correct.a given

To learn more about the covalent bond, refer to the link;

https://brainly.com/question/10777799

#SPJ2

Answer:

F=GMm/r²

G=6.67x10^-11

F= 6.67x10^-11 x 55 x 55/(0.25)²

=3.228 x 10^-6N

The gravitational force of attraction between the two people is 3.23 × 10⁻⁶ N

From Newton's law of universal gravitation formula, we have that

[tex]F = G\frac{m_{1}m_{2} }{r^{2} }[/tex]

Where F is the gravitational force

G is the gravitational constant (G = 6.67408 × 10⁻¹¹ m³.kg⁻¹.s⁻²)

m₁ is the mass of object 1

m₂ is the mass of object 2

and r is the distance between the centers of the masses

From the question

m₁ = 55 kg

m₂ = 55 kg

r = 0.25 m

Putting the parameters into the formula, we get

[tex]F = 6.67408 \times 10^{-11} \times \frac{55 \times 55}{0.25^{2} }[/tex]

∴ F = 3.23 × 10⁻⁶ N

Hence, the gravitational force of attraction between the two people is 3.23 × 10⁻⁶ N

Learn more here: https://brainly.com/question/20856669

Answer:

Interpolation

Explanation:

The graph shows that it falls between 2 values and interpolation means that you estimate the unknown values that fall between the 2 values. Hope this helps!

The data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.

Extrapolation is the process of extending a line connecting the data points beyond the given data points to make inferences based on the previous trend of the data set. This helps us to understand what will happen in the future if the trend continues in the same manner.

Interpolation is the process of determining an unknown variable between two known variables. In this process the data point is located within the line connecting the data points.

In this given graph, the data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.

Learn more here: https://brainly.com/question/11958294

The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.

The given parameters:

The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is calculated as follows;

[tex]v = \sqrt{30 D fn} \\\\40 = \sqrt{30 \times D \times 0.85 \times 0.8} \\\\40 = \sqrt{20.4 D} \\\\40^2 = 20.4D\\\\1600 = 20.4 D\\\\D = \frac{1600}{20.4} \\\\D = 78.43 \ ft[/tex]

Thus, the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.

Learn more about length of a skid mark here: https://brainly.com/question/16914218

Answer:

The gravitational force between earth and any object is known as gravity.

...

Answer:

Ek = 4250 J

Explanation:

Data:

Formula:

Replace and solve:

It has 4250 Joules of Kinetic Energy.

Greetings.

Answer:

y e s

Explanation:

Answer:

Slow-moving rivers generate extensive floodplains and meanders through erosion and deposition. Stream and river deposition can result in the formation of alluvial fans and deltas. Natural levees may be formed by floodwaters. Caves and sinkholes can arise as a result of groundwater erosion and deposition.

Explanation:

s

The erosion and deposition of sediments in a river creates broad floodplains and meanders.

Deposition occurs when sediment, a combination of soil and rock produced by weathering, is eroded and transported to a new area.

Deposition is the act of depositing silt that has been transported by the wind, water, sea, or ice.

Earthen materials are worn away during erosion, a geological process in which they are moved by wind or water.

The removal of soil, rock, or dissolved material from one area on the Earth's crust and subsequent transport to another region for deposition are known as erosional processes. Erosion differs from weathering, which is a static process.

Given data ,

Let the erosion and deposition of sediments be deposited in a river

Now , Pebbles, sand, mud, and salts that have been dissolved in water can all be used to convey sediment. Afterwards, salts may be left behind by organic action.

Now , floodplain is caused when erosion happens

And , A floodplain is a broad, level or nearly level area of land where the stream flows.

Meandering streams that wander from side to side broaden the plain by eroding it during the formation of the plain. Flooding can occur when stream flows overflow from their channel due to very excessive rainfall or quick snow-melt.

Hence , floodplain and meandering occurs due to erosion and deposition

To learn more about erosion and deposition click :

https://brainly.com/question/11405153

#SPJ6

Answer:

B = 25°

C = 65°

D = 25°

Explanation:

The given parameters are;

The orientation of the two mirrors = At right angle to each other

The laser light is directed at one of the mirror

The measure of angle, A = 25°

The measures of angle B, C, and D are found as follows;

We have;

∠A = ∠B = 25°, by angle of incidence equals angle of reflection

∠B = 25°

∠B + ∠C = 90° by sum of the acute angles of a right triangle

25° + ∠C = 90°

∴ ∠C = 90° - 25° = 65°

∠C = 65°

∠E = ∠C = 65° by angle of incidence equals angle of reflection

∴ ∠E = 65°

Line 'L' is perpendicular to the second mirror, therefore, the angle between line 'L' and the second mirror = 90° = ∠E + ∠D

∠E + ∠D = 90°,  by angle sum property

Therefore;

65° + ∠D = 90°

∴ ∠D = 90° - 65° = 25°

∠D = 25°

Answer:

60 °C

Explanation:

From the question given above, the following data were obtained:

Mass of 1st sample (M₁) = 200 g

Temperature of 1st sample (T₁) = 80 °C

Mass of 2nd sample (M₂) = 100 g

Temperature of 2nd sample (T₂) = 20 °C

Equilibrium temperature (Tₑ) =?

NOTE: Since the sample are the same, the specific heat capacity is constant.

We can obtain the equilibrium temperature as follow:

Heat lost by 1st = heat gained by the 2nd

M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)

Cancel out C

M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)

200 (80 – Tₑ) = 100 (Tₑ – 20)

Clear bracket

16000 – 200Tₑ = 100Tₑ – 2000

Collect like terms

16000 + 2000 = 100Tₑ + 200Tₑ

18000 = 300Tₑ

Divide both side by 300

Tₑ = 18000 / 300

Tₑ = 60 °C

Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.

Answer:

hmm...

Explanation:

Answer: wave a has the higher ampllitude while wave b has the lower amplitude.

Explanation:

wave a has the amplitude of 4 while wave b has the amplitude of one

Answer:

Explanation:

Im going to be using the rules for significant digits properly so I hope you're quite familiar with them. The equation we need for this is

F - f = ma where F is the applied force (our unknown), f is the frictional force, m is the mass, and a is the acceleration. Filling in:

F - 18.2 = 2.25(1.50) and

F = 2.25(1.50) + 18.2  Do the multiplication first and round to get

F = 3.38 + 18.2   The addition rules tell us that we will be rounding to the tenths place after we add to get

F = 21.6 N

Answer:

ų=0.8

Explanation:

F=mg

F=4×9.81=39.24N

Ff=Fn-F

=39.24-8=31.24

ų=Ff÷Fn

=31.24÷39.24

=0.8