The reason at the time when particles in a solid or liquid move slower and closer together should be explained below.
What are particles?The particles should be in the form of small pieces of matters. Also, the scientist believed that each and everything in the universe should be made of the particles. here the range of the particles should be in the range via the large subatomic particles such as electrons or it has lower microscopic particles.
Learn more about particles here: https://brainly.com/question/21526256
Why are wildfires getting worse ? Does is have to do with Climate Change ?
Answer:
There is a logical explanation for that.
Explanation:
Human activities such as lighting campfires and discarding lit cigarettes are responsible for starting fires, hotter weather makes forests drier and more susceptible to burning.
Rising temperatures, a key to climate change, evaporate moisture from the ground, drying out the soil, and making vegetation more flammable. At the same time, winter snowpacks are melting a month earlier, meaning forests are drier for longer periods.
As drought and rising heat continue with rising greenhouse gas emissions, there will be more expected wildfires in the years ahead, especially with the fire seasons getting longer.
Which type of carbohydrate is the body unable to digest, but is still important for lowering cholesterol, balances glucose levels, and helps prevent overeating.
Answer:
Cellulose
Explanation:
Cellulose is the carbohydrate which is unable to be digested by body. Adding fiber's (cellulose) to one's diet reduces blood cholesterol level because soluble fiber dissolves in water to form a gel, which moves slowly through the intestines binding up fat, dietary cholesterol, bile salts, and sugar to be excreted. Once excreted, these are no longer available to build more cholesterol. Also cellulose remains undigested but is effectively making one gain more calories, so it helps prevents over eating.
On the moon, the acceleration due to gravity is one-sixth that of earth. That is gmoon = gearth /6 = (9.8 m/s2 )/6 = 1.63 m/s2 . What effect, if any, would this have on the period of a pendulum of length L? How would the period of this pendulum differ from an equivalent one on earth?
A robin flies a distance of 45963 cm. How far has it flown in kilometers?
Answer:
0.46km
Explanation:
45963cm/100cm=459.63m/1000m=0.45963 or 0.46km
A small chunk of wax floats if placed in water. If huge piece of wax that is as heavy as a
car, is placed in water, it will
A 1500 kg car starts from rest,
and rolls down a frictionless 5.09°
slope that is 17.5 m long. How
much time does it take to reach
the bottom?
(Unit = s)
The time taken for the heavy car to reach the bottom of the frictionless slope is 0.56 s.
Height of the slope
The height of the incline is calculated as follows;
sin θ = h/L
h = L sinθ
where;
L is length of slopeh is height of the slopeh = 17.5 x sin(5.09)
h = 1.55 m
Time of motion of the cart = √(2h/g)
where;
t is time of motiong is acceleration due to gravityt = √(2 x 1.55 /9.8)
t = 0.56 s
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
Answer:
T= 6.34
Explanation:
This is the answer. This answer also works on acellus
What is the average speed of a car that traveled for 192.5 miles in 3.5 hours?
Answer:
55miles per hour
Explanation:
speed=distance/time
speed=192.5miles/3.5hours
speed=55miles per hour
Answer:
55miles per hour
Explanation:
Simply divide the number you travelled with the hour you will get the answer.
which is one characteristic of an electron?
Answer:
The electron is a negatively charged particle found in the atoms of all the elements. The electrons are located outside the nucleus in an atom. An electron is usually represented by the symbol (e –). The mass of an electron is about the mass of a hydrogen atom.
Explanation:
A person weighing 600N runs up a flight of stairs. It takes the person 10s to get to the top. They are 6m higher at the top of the stairs. How much power was used?
Answer:
[tex]Power = 360W[/tex]
Explanation:
Given
[tex]Force = 600N[/tex]
[tex]Time = 10s[/tex]
[tex]Height = 6m[/tex]
Required
Determine the power used
First, we need to calculate the work done to climb the stairs.
[tex]Word = Force * Distance[/tex]
In this case, the distance represents the height of the stairs.
So:
[tex]Work = 600N * 6m[/tex]
[tex]Work = 3600J[/tex]
Next, we calculate the power using:
[tex]Power = \frac{Work}{Time}[/tex]
Substitute values for Work and Time
[tex]Power = \frac{3600J}{10s}[/tex]
[tex]Power = 360W[/tex]
Hence, the power used by the person is 360 watts
Two metallic rods A and B of different materials have same length. The linear expansivity of A is 12×10–6 oC–1and cubical expansivity of B is 24×10–6 oC–1. If both rods are heated from 20oC to 100oC, the length of rod A will be....................... The length of rod B.
Answer:
The length of rod A will be greater than the length of rod B
Explanation:
We, know that the formula for final length in linear thermal expansion of a rod is:
L' = L(1 + ∝ΔT)
where,
L' = Final Length
L = Initial Length
∝ = Co-efficient of linear expansion
ΔT = Change in temperature
Since, the rods here have same original length and the temperature difference is same as well. Therefore, the final length will only depend upon the coefficient of linear expansion.
For Rod A:
∝₁ = 12 x 10⁻⁶ °C⁻¹
For Rod B:
∝₂ = β₂/3
where,
β₂ = Coefficient of volumetric expansion for rod B = 24 x 10⁻⁶ °C⁻¹
Therefore,
∝₂ = 24 x 10⁻⁶ °C⁻¹/3
∝₂ = 8 x 10⁻⁶ °C⁻¹
Since,
∝₁ > ∝₂
Therefore,
L₁ > L₂
So, the length of rod A will be greater than the length of rod B
the traits of friends
Answer:
someone you trust the most
Explanation:
Density Questions
How many blocks of ice-cream each 10cm x 10 cm x 4cm can be stored in the compartenent of a deep-freeze measuring 40 cm x 40cm x 20cm?
Explanation:
let's take the volume of each first:
ice cream: 10×10×4=400cm^3
freezer: 40×40×20=32,000cm^3
now we just divide: 32000/400=80
How would you use a diet diary or nutrition log to evaluate your eating habits?
Answer:
to see how much you are getting of something
Explanation:
Answer:
I would use it to track everything nutrition wise.
Explanation:
I would use it to track everything nutrition wise. Meaning that if I do anything that is in the process of eating or consuming food, I would log it down. A good example of what goes in a dietary log would be how much you ate, the amount of calories you ate, and occasionally the amount of serving you ate based off the recommended serving size. It should be important to keep a fitness log if you are interested in keeping a diet diary; to further track calories!
Hope this helps <3
A baseball bat strikes a baseball of mass that is at rest, and as a result the baseball files away from the bat. The kinetic energy gained by the
baseball as it leaves the bat is due to the
(A) loss of mass after the ball is hit.
(B) gain in potential energy as the ball rises to the peak of its trajectory
(C) loss of potential energy of the ball as it falls back to the ground
(D) work done by the bat on the ball
Answer:
The correct option is D
Explanation:
When an object at rest is acted upon by an external force, the motion gained (of the body) will proceed in the direction of the force. This is caused by the workdone by the bat on the ball. The motion gained mentioned earlier is the kinetic energy.
Kinetic energy can be described as the energy in a moving object.
Answer:
(D) work done by the bat on the ball
Explanation:
The principle of work-energy theorem, states that work done by the sum of all the forces acting on an object, is equal to the gain in the kinetic energy of the object.
When the baseball bat strikes the baseball which causes a displacement in the initial position of the baseball, work is said to be done which is equal to the change in the kinetic energy of the baseball.
Thus, The kinetic energy gained by the baseball as it leaves the bat is due to the work done by the bat on the ball.
Physics please help me.
Answer:
F = 780 [N]
Explanation:
To solve this problem we must use newton's second law which tells us that the sum of forces on a body must be equal to the product of mass by acceleration
ΣF =m*a
where:
F = force [N] (units of Newtons)
m = mass = 2600 [kg]
a = acceleration = 0.3 [m/s²]
F = 2600*0.3
F = 780 [N]
The number of waves that pass a given point in a second is___.
1- amplitude
2- wavelength
3- frequency
4- wave speed
Answer:
Frequency
Explanation:
The frequency ( ) of a wave is the number of waves passing a point in a certain time.
An object with a mass of 5 kilograms starts from rest and achieves a maximum speed of 10 meters per second in 0.5 seconds. What average unbalanced force on this object?
a. 50 N
b. 100 N
c. 10 N
d. 1000 N
Answer:
I think 1000 N............
A box of mass 60 kg is at rest on a horizontal floor that has a static coefficient of friction of 0.6 and a kinetic coefficient of 0.25
a)The minimum force necessary to start moving the box
b) The friction force and the acceleration of the box if a horizontal force of 400 N is applied
Answer:
a) F = 353.2 N
b) [tex]F_{f} = 147.2 N [/tex]
a = 4.21 m/s²
Explanation:
a) The minimum force necessary to start moving the box s given by:
[tex]\Sigma F = 0[/tex]
[tex] F - \mu_{s}N = 0 [/tex]
[tex] F = \mu_{s}mg [/tex]
Where:
F: is the force applied to move the box
μs: is the static coefficient of friction = 0.6
m: is the mass = 60 kg
g: is the gravity = 9.81 m/s²
[tex] F = 0.6*60 kg*9.81 m/s^{2} = 353.2 N [/tex]
b) The acceleration is:
[tex] F - F_{f} = ma [/tex]
[tex] F - \mu_{k}mg = ma [/tex]
[tex] a = \frac{F - \mu_{k}mg}{m} = \frac{400 N - 0.25*60 kg*9.81 m/s^{2}}{60 kg} = 4.21 m/s^{2} [/tex]
Now, the friction force is:
[tex] F_{f} = \mu_{k}mg = 0.25*60 kg*9.81 m/s^{2} = 147.2 N [/tex]
I hope it helps you!
A ball that is out of play is called a __________________. 2. Volleyballs are made out of __________________ material. 3. A __________________ occurs when the server steps on or over the end line. 4. Contact of the ball by a player is called __________________. 5. The __________________ decides who will serve and the choice of playing area.
Answer:
1) Deadball
2) Leather
3) Foot Fault
4) Pass
5) Captain
Explanation:
1) In most sports when a ball is out of play or termed temporarily unplayable, it is said to be a Deadball.
2) Volleyballs are generally made of leather materials be it synthetic or genuine leather.
3) In volleyball, when a server steps on or over the end line, it is called foot fault.
4) The first contact of a ball by a player after a serve from a passer is usually called a pass.
5) In volleyball, the referee issues a coin toss in presence of both captains and the captain with the winning toss is the one that makes the choice of play area and the first server.
- A ball is thrown at a wall 50 meters away. It takes the ball 5 seconds to get to
the wall it is thrown at What is the average speed of the ball? SPEED
Answer:
The answer is 10 m/sExplanation:
The average speed of the ball can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
d is the distance
t is the time taken
From the question we have
[tex]v = \frac{50}{5} \\ [/tex]
We have the final answer as
10 m/sHope this helps you
Convert 93.6 miles per hour. Convert this to kilometers per hour.
Answer:
150.6 km
Explanation:
One mile is about 1.61 km so multiply 93.6 by 1.6 which gives you above 150.6
¿Cuál será la potencia o consumo en watt de una ampolleta conectada a una red de energía eléctrica doméstica monofásica de 220 volt, si la corriente que circula por el circuito de la ampolleta es de 0,45 ampere?.
Answer:
La potencia o consumo en watt de una ampolleta conectada a una red de energía eléctrica doméstica monofásica de 220 volt, si la corriente que circula por el circuito de la ampolleta es de 0.45 ampere, es 99 Watts.
Explanation:
Potencia es la velocidad o rapidez con la que se consume la energía. Siendo la energía la capacidad que tiene un mecanismo o dispositivo eléctrico cualquiera para realizar un trabajo, también se puede definir potencia como la energía desarrollada o consumida en una unidad de tiempo. Su unidad de medida es el Watt.
La ley de Watt establece que la potencia eléctrica P suministrada por un elemento de circuito, es directamente proporcional al producto entre la tensión de la alimentación V del circuito y la intensidad de corriente I que circula por él.
Matemáticamente, la ley de Watt se expresa:
P = V.I
donde V es medida en Volt e I es medida en Ampere.
En este caso:
V=220 voltI= 0.45 ampereReemplazando:
P= 220 volt* 0.45 ampere
P= 99 Watts
La potencia o consumo en watt de una ampolleta conectada a una red de energía eléctrica doméstica monofásica de 220 volt, si la corriente que circula por el circuito de la ampolleta es de 0.45 ampere, es 99 Watts.
Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.
Online Content: Site 1
Fitness Log
What are the advantages of strength exercises? (Site 1)
Strength training may help you control or lose weight. Strength exercise boosts your metabolism and burns more calories.
What is a strength exercise?Strength training is essential for increasing flexibility, mobility, performance, and injury prevention. you don't need to spend hours at the gym to see results.
In the comfort of your own home, we'll teach you the fundamentals of strength training. A full-body strength-building workout will take only nine minutes of effort. Grab a towel and prepare to feel powerful.
The advantages of strength exercises will be as follows;
1. Strength training may help you control or lose weight,
2. Strength exercise boosts your metabolism and burns more calories.
3. Improve your quality of life and your capacity to do daily tasks.
4. Strength exercise can also help to keep your joints healthy.
Hence strength training may help you control or lose weight. Strength exercise boosts your metabolism and burns more calories.
To learn more about the strength exercise refer to the link;
https://brainly.com/question/17542743
Answer:
Other one is wrong, this one I got 100% on.
Explanation:
Protection – Protect the wounded area with a support or something similar. this means after an injury has happened, use tools or simple objects to cover and protect the injury so nothing else can harm or get into the injury.
Rest – Do not continue to exercise while your wound is healing. It may take a few weeks or months to recover. You may need crutches or a sling. This means take the time to give your body the rest and relaxation it needs in order to be strong and healthy again.
Ice – Wrap a bag of ice or a bag of frozen peas in a towel and apply it to the wounded area for 15–20 minutes every two to three hours. As it states, ice can help recover an injury or make the swelling and pain go away, this will also help you stay relaxed and calm
Compression – Apply elastic compression bandages to the wounded area during the day to reduce swelling. Compression greatly helps stop any blood or fluid from leaving the body, using the compression method closes an open wound and uses pressure to keep the wound closed
Elevation – Make sure the injured body part is elevated above the height of your heart as much as possible to help reduce swelling. This is also important, elevation helps keep swelling down and help keeps unwanted blood out of the wound
know the types of peer pressure describe all of them
Answer:
Spoken Peer Pressure
Positive Peer Pressure
Direct Peer Pressure
Negative Peer Pressure
Positive Peer Pressure
Unspoken Peer Pressure
Indirect Peer Pressure
Sorry this is all I know
Hope this Helps!
There are screws all around you. Name five examples of screws that you see in everyday life? Think broadly!
Screw pump, Drill Machine, Bottle Caps, Faucets and Car Jack are the five examples of screws that we see in everyday life.
What is screw?Screw is defined as a short, sharp-pointed metal pin with a raised helical thread present round it. It has a slotted head that is used to join things together by rotating it so that it pierces wood and is held tightly on its place. Screw is used in many materials in order to join two frames or bodies with each other. Without this screw, we can't imagine many materials to work together so screw has very high importance.
So we can conclude that Screw pump, Drill Machine, Bottle Caps, Faucets and Car Jack are the five examples of screws that we see in everyday life.
Learn more about screw here: https://brainly.com/question/9620666
#SPJ1
I am the energy of moving electrons and magnetic interactions. What type of energy am I?|
am the
Answer:
Electrical energy
Explanation:
Electrical energy deals with magnetism and moving electrons
Answer: you are electrical energy
Explanation:
Think about the force that causes a planet to orbit the Sun and the direction of this
force. How does a puck swung by a string on the table relate to a planet orbiting the
Sun? What forces are acting on the puck and what forces are acting on the planet
Answer:
1) For the swung puck tied to the string that has a mass m₁ and having another mass m₂ attached to the string that passes through a hole in the table, such that m₂ > m₁
The swung puck rotating on the table is kept in the circular motion on the table by the centripetal force acting towards the center of its rotation along the string, which is given by the amount the weight of m₂ exceeds m₁, in the same way a planet moving around the Sun is kept in its orbit by the gravitational attraction between the planet and the Sun.
2) i) The forces acting on the puck are;
a) The centripetal force in the string, acting inward, towards the center of rotation provided by the weight of m₂
b) The centrifugal force of the puck, acting outward, tending to continue its motion in a straight line
ii) The forces acting on the planet are;
a) The force of gravitational attraction between the planet and the Sun, acting towards the Sun, such that, the planet revolves around the Sun
b) The centrifugal force of the planet, acting outward, tending to move in a linear or straight path
Explanation:
Forces on Puck Swung
Centrifugal Force (Outwards from puck swung )
Tension( Towards the center)
Forces on the Planet
Centrifugal Force (Outwards from Planets )
Gravitational Force ( Inwards towards Sun )
Let us suppose that the
The puck swung is connected with a center at a distance of radius r
so it is revolving around the point just like planets revolve around the Sun.
The Centrifugal Force and Gravitational Force causes the planetary motion around the sun.
The Centrifugal force is an outward force and is observed from the accelerated frame of reference , In our case Planet and puck swung are the accelerated frame of references.
The Gravitational Force between the Sun and the planets (directed towards Sun) is balanced by Centrifugal Force.
Let us consider that the string of puck swung has negligible mass
So the Tension which is directed towards the center will provide the force to counterbalance the centrifugal force acting on puck swung.
So Tension will act towards the center in case of puck swung and centrifugal force will act outwards.
For more information please refer to the link below
https://brainly.com/question/17167298
which characteristic is related to kinetic energy but not potential energy.
A. an objects mass
B. an objects speed
C. an objects shape
D. an objects height
Answer:
Option (D)
Explanation:
An electron with a total energy of 19GeV travels through an accelerator tube with proper length 7.7km. a) What is the length of the tube in the electron's frame? E= m b) How long does it take in the frame of the electron? E= s c) How long does it take in the frame of the tube? T= s Note: the rest energy of an electron is: 0=0.51MeV.
Answer:
a) Approximately 0.2066 m
b) 0.00002568443 s
c) Approximately 188.87 s
Explanation:
a) The total energy of the electron = 190GeV
The rest energy of the electron = 0.51 MeV
[tex]\dfrac{19 \ GeV}{0.51 \ MeV} = 37254.902 = \dfrac{1}{\sqrt{1 + \dfrac{u^2}{c^2} } }[/tex]
[tex]\left ( 1 - \dfrac{u^2}{c^2} \right ) = \dfrac{1}{37254.902^2} } }[/tex]
[tex]\left ( 1 - \dfrac{1}{37254.902^2} } } \right ) = \dfrac{u^2}{c^2}[/tex]
u = √(299792458² × (1 - 1/37254.902²)) = 299792457.892
β = v/c = 299792457.892/299792458 = 0.99999999964
[tex]\beta = \sqrt{1 - \left ( \dfrac{\Delta x}{\Delta x'} \right )^2}[/tex]
Δx = √(Δx'²×(1 - β²)) = √(7700²×(1 - 0.99999999964²)) ≈ 0.2066 m
The length of the tube in the electron's frame ≈ 0.2066 m
b) The time in the frame of the electron is given as follows;
Δt' = 7700/299792457.892 = 0.00002568443 s
c) The time in the frame of the tube is given as follows;
[tex]\beta = \sqrt{1 - \left ( \dfrac{\Delta t'}{\Delta t} \right )^2}[/tex]
1 - β² = (Δt'/Δt)²
Δt = √(Δt'/(1 - β²)) = √(0.00002568443 /(1 - 0.99999999964²)) ≈ 188.87 s.
In Stage 4 sleep, what type of brain waves do you have?
A. Delta
B. Beta
C. Spindle waves
D. Neural
a) the answer is delta waves i think
Answer:
A
Explanation: