what species has an atom with an oxidation number of 3
Can water stay liquid below zero degrees Celsius?
nope it vaporized
.........pls Mark barinlist I
Advantages and disadvantages of titration?
Answer:
What are the advantages of titration?
Titrimetric analysis commonly referred to as volumetric analysis offers distinct advantages over cumbersome gravimetric methods:
Speed of analysis.
Instantaneous completion of reactions.
Greater accuracy due to minimization of material loss involved in decanting, filtration, precipitation or similar operations.
Explanation:
Disadvantages
It is a destructive method often using up relatively large quantities of the substance being analysed.
It requires reactions to occur in a liquid phase, often the chemistry of interest will make this inappropriate.
It can produce significant amounts of chemical waste which has to be disposed of.
It has limited accuracy.
hope this helps Please inform me if its helpful
The advantages of titration:
It is generally cheap, requiring little in the way of equipment.It does not require a high level of skill.It can often be done rapidly.Results are immediately available.Disadvantages
It is a destructive method often using up relatively large quantities of the substance being analysed.It requires reactions to occur in a liquid phase, often the chemistry of interest will make this inappropriate.It can produce significant amounts of chemical waste which has to be disposed of.What is titration?Titration is a quantitative technique where a solution of a known concentration is used to determine the concentration of the unknown solution.
Titration is a technique where a solution of known concentration is used to determine the concentration of an unknown solution.
The Titration Process Is Influenced by the Following Factors:
Measuring methodInstrument (instrument uncertainty/abrasion of the burette)Electrodes (electrode uncertainty/alteration of electrodes)HandlingBalance (weighing error)TemperatureVolumetric solution (change of the concentration, through alteration, carbon dioxide, vaporation of water/solvent)Learn more about titration here:
https://brainly.com/question/13307013
#SPJ2
5 grams of sodium bicarbonate, a white powdery solid, is placed in an empty red balloon. 100 grams of acetic acid, a clear aqueous solution, is placed in the plastic bottle. The balloon is carefully attached to the bottle so that no air can get in or out and the powder does not fall into the bottle. Once attached, the apparatus is placed on a balance and the contents are mixed. Bubbles form, the balloon inflated, and the white powder is no longer visible. Which of the these statements would match your observations? A) A chemical reaction has occurred and the mass will increase. B) A chemical reaction has occurred and the mass will decrease. C) A physical reaction has occurred and the mass will decrease. D) A chemical reaction has occurred and the mass will remain the same.
Answer: im pretty sure its D
Explanation:
How many grams of barium chloride are produced when 1.25 x 1023 molecules of HCl reacts with barium?
Considering the reaction stoichiometry and Avogadro's Number, the mass of barium chloride produced is 21.6 grams.
Balanced reaction
The balanced reaction is
2 HCl + Ba → BaCl₂ + H₂
Moles of HCl that reactAvogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.
Then you can apply the following rule of three: if 6.023×10²³ molecules are contained in 1 mole of HCl, then 1.25×10²³ molecules are contained in how many moles of HCl?
amount of moles of HCl= (1.25×10²³ molecules × 1 mole)÷ 6.023×10²³ atoms
amount of moles of HCl= 0.2075 moles
Then, 0.2075 moles of HCl react.
Reaction stoichiometryBy reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
HCl: 2 moles Ba: 1 mole BaCl₂: 1 mole H₂: 1 moleMass of barium chloride producedThen you can apply the following rule of three: if by stoichiometry 2 moles of HCl produce 1 mole of BaCl₂, 0.2075 moles of HCl will produce how many moles of BaCl₂?
[tex]amount of moles of BaCl_{2} =\frac{0.2075 moles of HCl x 1 mole of BaCl_{2} }{ 2moles of HCl}[/tex]
amount of moles of BaCl₂= 0.10375 moles
Being the molar mass of BaCl₂ 208.24 g/mole, then the mass of barium chloride produced is calculated as:
[tex]0.10375 molesx\frac{208.24 grams}{1 mole} =21.6 grams[/tex]
Finally, the mass of barium chloride produced is 21.6 grams.
Learn more about:
Avogadro's Numberbrainly.com/question/11907018?referrer=searchResults brainly.com/question/1445383?referrer=searchResults brainly.com/question/1528951?referrer=searchResultsReaction stoichiometry brainly.com/question/16487206?referrer=searchResults brainly.com/question/14446695?referrer=searchResults brainly.com/question/11564309?referrer=searchResults brainly.com/question/4025026?referrer=searchResults brainly.com/question/18650135?referrer=searchResultsThe chemical equation below shows the decomposition of ammonium nitrate (NH4NO3). NH4NO3 Right arrow. N2O 2H2O A chemist who is performing this reaction starts with 160. 1 g of NH4NO3. The molar mass of NH4NO3 is 80. 03 g/mol; the molar mass of water (H2O) is 18. 01 g/mol. What mass, in grams, of H2O is produced? 9. 01 18. 01 36. 03 72. 6.
The mass of water, H₂O produced from the reaction is 72.06 g
We'll begin by calculating the mass of NH₄NO₃ that reacted and the mass of H₂O produced from the balanced equation.
NH₄NO₃ —> N₂O + 2H₂O
Molar mass of NH₄NO₃ = 80.03 g/mol
Mass of NH₄NO₃ from the balanced equation = 1 × 80.03 = 80.03 g
Molar mass of H₂O = 18.01 g/mol
Mass of H₂O from the balanced equation = 2 × 18.01 = 36.02 g
From the balanced equation above,
80.03 g of NH₄NO₃ reacted to produce 36.02 g of H₂O
Finally, we shall determine the mass of H₂O produced by the reaction of 160.1 g of NH₄NO₃.
From the balanced equation above,
80.03 g of NH₄NO₃ reacted to produce 36.02 g of H₂O.
Therefore,
160.1 g of NH₄NO₃ will react to produce = (160.1 × 36.02) / 80.03 = 72.06 g of H₂O.
Thus, the mass of water, H₂O produced from the reaction is 72.06 g
Learn more on stiochoimetry: https://brainly.com/question/15048051
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
3.22 x 0.17 = [?]
Answer:
0.5474
Explanation:
3.22 x 0.17
\/
322 x 17 = 5,474
[] There are four places "after" the decimal in 3.22 and 0.17 combined, meaning we move the decimal to the right four times in our current answer
-> 5,474 becomes 0.5474
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Answer:0.55
Explanation:
3.22 × 0.17 calculated with significant figures is 0.55, which has 2 sig figs and 2 decimals. There are 2 steps to calculate 3.22 × 0.17 with sig figs. 0.55 rounded to 1 sig figs is 0.6.
Which non metal is highly reactive
Answer:
element fluorineThe most reactive nonmetals reside in the upper right portion of the periodic table. Since the noble gases are a special group because of their lack of reactivity, the element fluorine is the most reactive nonmetal.NEED HELP ASAP!!! TYSM!!!! What are the coefficients when the following equations are balanced?
__CH4 + __O2 --> __CO2 + __H2O
__Fe + __O2 --> __Fe2O3
preventive maintenance on a hot water heater includes:
A water heater can be regularly maintained by flushing it at least two times in a year.
A water heater is a device that is used to heat up water for home use. There are different types of water heaters but they all serve the same purpose at home. In order to maintain maximum efficiency, the water heater must be maintained regularly.
The following are routine maintenance operations on a water heater;
Inspect the heater regularly to ascertain if there are faults.Flush the heater at least two times each year.The anode rod should be changed after a couple of yearsLearn more about water heater;https://brainly.com/question/4751630
How did the believers show their fellowship with one another?
Answer:
I think you may have chosen the wrong subject for your question, besides where is the context to this?
Exhaling CO2 (Carbon Dioxide) is an example of what?
A-Excretion
B-movement
C- Nutrition
D- Reproduction
100 POINTS PLEASE HELP
1. What is the molar mass of NaOH?
2.How many atoms are in 3.35 moles of Aluminum?
3.How many moles of CO2 gas are in a 101.25 L container filled with CO2 gas?
4.What is the mass of 13.7 moles of N2 gas?
5.How many moles are in 78.5 molecules of CaCO3?
Answer:
1. 39.997 g/mol
2. 6.022⋅1023 atoms of aluminium
3. 0.026 moles
4. 14 grams is the molar mass of nitrogen meaning that one mole of nitrogen atoms is 14 grams. One mole of any substance has 6.02*10^23 atoms/molecules of that subtance therefore there are 6.02*10^23 atoms of nitrogen in 14g of nitrogen
5. 78.5
Explanation:
Identify the limiting reactant when 9.65-g H2SO4 reacts with 6.10-g of NaOH.
Answer:
3.56
Explanation:
what natural resources are used to make plastic bags
Answer:patrolieum
Explanation:
how many molecules of atp are produced as a result of glycolysis
Answer:
2 ATP molecules are produced
Answer:
2 ATP molecules of ATP are produced
HELP WILL MARK BRAINLIEST
If an electrically charged plastic bag is placed close to an uncharged cloth, what will happen?
The charge of the bag will change.
The charge of the cloth will change.
The plastic bag will attract the cloth.
The plastic bag will repel the cloth.
Answer:the plastic bag will attract the cloth
Explanation:
Answer:
c
Explanation:
hope this helps
Which of the following compounds contains the largest number of atoms? *
O A. 1.00 mole of NH3
O B. 1.00 mole of H2SO4
о
C. 1.00 mole of HBr
A 1.00 mole of Sulfuric acid (H₂SO₄) contains the largest number of atoms (7 atoms/molecule). Option B is correct.
To determine which of the given compounds contains the largest number of atoms in 1.00 mole, we need to consider the number of atoms in each compound.
1.00 mole of NH₃ contains:
1 mole of N atoms (1 atom/molecule)
3 moles of H atoms (3 atoms/molecule)
Total atoms = 1 + 3 = 4 atoms/molecule
1.00 mole of H₂SO₄ contains:
2 moles of H atoms (2 atoms/molecule)
1 mole of S atoms (1 atom/molecule)
4 moles of O atoms (4 atoms/molecule)
Total atoms = 2 + 1 + 4 = 7 atoms/molecule
1.00 mole of HBr contains:
1 mole of H atoms (1 atom/molecule)
1 mole of Br atoms (1 atom/molecule)
Total atoms = 1 + 1 = 2 atoms/molecule
Therefore, 1.00 mole of H₂SO₄, contains the largest number of atoms.
Hence, B. is the correct option.
To know more about Sulfuric acid here
https://brainly.com/question/12125396
#SPJ3
how did Alexander dye ?
Answer:
After surviving battle after fierce battle, Alexander the Great died in June 323 B.C. at age 32. Some historians say Alexander died of malaria or other natural causes; others believe he was poisoned. Either way, he never named a successor.
Answer:
After surviving battle after fierce battle, Alexander the Great died in June 323 B.C. at age 32. Some historians say Alexander died of malaria or other natural causes; others believe he was poisoned. Either way, he never named a successor
Explanation:
hope it helps
either elements or compounds which are present prior to a chemical reaction
Answer:
Do you mean the reactants? They are present prior to the reaction taking place. The products are the results of the reaction.
how many atp are produced in the electron transport chain
Answer:
34 ATP
Explanation:
NO LINKS!!!
Help . . .
Where is the magnetic field strongest?
A. closest to the wire
B. Farthest from the wire
Answer:
In general, the magnetic field is strongest close to the wire and weaker farther away. In fact, the magnetic field weakens as 1/r1/r where rr is the distance from the wire. This can change a bit depending on the length and shape of the wire. Far enough away, the magnetic field decays as 1/r21/r2 .
Answer:
Closest to the wire
Explanation:
In general, the magnetic field is strongest close to the wire and weaker farther away. In fact, the magnetic field weakens as where is the distance from the wire. This can change a bit depending on the length and shape of the wire.
Pls
Due today pls help asfast as possible
Answer: D. 10,000 km = Exosphere; 690 km = Thermosphere; 85 km Mesosphere; 50 km = Stratosphere; 20 km = Troposphere
2. True
3. True
4. True
5. True
Which of the following would
9 indicate a new substance has
been formed?
Bubbling and fizzing
occur.
Powder dissolves in
an unknown liquid
A beaker of
hydrochloric acid
evaporates after
several days
Solid iron is melted to
a liquid
Color YELLOW
Color ORANGE
Color PINK
Which one?
Answer:
Bubbling and fizzing are likely to occur when a new substance is formed. The other examples are simply changing to a different form of the same substance.
PLS HELP
Answer this question and I will mark you the braninliest! <3
Answer:
the left one
Explanation:
heavier means it goes faster
100 ml of nitrogen collected at 27 degree celcius cooled to -73 degree celcius at same pressure.calculate the contraction in volume.
Explanation:
P1. V1/T1 = P2. V2/T2
Apply this
since here, P1 = P2
100 ml / 300 = V2/ 200
==> 100*200/300 = V2
===> V2 = 66.66 ml
20. A way to describe a chemical reaction
a. Equations
c. Molecules
b. Metals
d. Elements
Copper has a density of 8.96 g/cm^3. What is the mass of a piece of copper with a volume of 2.62 cm^3?
Answer:
23.48
Explanation:
Good Luck!
Answer: 23.48 g
Explanation:
formula: mass = density x volume
Volume of copper = 2.62 cm^3
Density of copper = 8.96 g/cm^3
mass = 8.96 x 2.62 = 23.4752
What do you think will happen to the Sun when all the hydrogen in it fuses to become helium?
Answer: In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.
someone pls help me explain this question
Question:
Temperature is a measure of how hot or cold something is.
Do you agree or disagree?
I need explanation I know its agree I just need to explain.
Answer:
yes agree. I is describing a feeling/ reaction to an action I hope this helps!:)