Answer:
The answer to your question is 404.2000
what do you mean by levels of professions
Answer:
your answer is.
I hope it will helpful for you
thank you
mark as brainest answer
If a fish experiences an a of 9.8m/s2 over a period of 1.84s, what was the 4v?
Answer:
It’s 18.0 m/s
Explanation:
Use acceleration formula then plug in 9.8 and 1.84s
A speed racer travels 25.3 m/s in 9.6 s. How far did it travel?
Speed = 25.3 m/s
Time taken = 9.6 s
To be calculated:-Calculate the distance covered by a body.
Formula applied:-Speed = Distance/Time
Solution:-We know,
Speed = Distance/Time
[tex] \bf\implies \: 25.3 = \frac{Distance}{9.6} [/tex]
[tex] \bf \implies \: Distance = 25.3 \times 9.6[/tex]
[tex] \bf\implies \: Distance = 242.88 \: m \: (approx)[/tex]
The figure shows a horizontal pipe with a circular cross section whose diameter varies. The cross-sectional area at X is 3.0×10−4m2 and at Y is 0.60×10−4m2. Water of density 1000kg/m3 fills the pipe and flows through it at a constant rate of 2.4×10−4m3/s. The difference in pressure between X and Y is most nearly 750 Pa 750 Pa A 1600 Pa 1600 Pa B 7700 Pa 7700 Pa C 8320 Pa 8320 Pa D
By Bernoulli's Principle :
[tex]P_x+\dfrac{\rho v_x^2}{2}+\rho gz_x=P_y+\dfrac{\rho v_y^2}{2}+\rho gz_y[/tex]
Since , pipe is horizontal so every point is at same height .
So , [tex]z_x=z_y[/tex] .
The equation will reduced to :
[tex]P_x+\dfrac{\rho v_x^2}{2}=P_y+\dfrac{\rho v_y^2}{2}[/tex] ..... 1 )
Also flow rate will be constant :
[tex]Q=A_xv_x=A_yv_y[/tex]
[tex]v_x=\dfrac{Q}{A_x}\\\\v_x=\dfrac{2.4\times 10^{-4}}{3\times 10^{-4}}\ m/s\\\\v_x=0.8\ m/s[/tex]
[tex]v_y=\dfrac{Q}{A_y}\\\\v_y=\dfrac{2.4\times 10^{-4}}{0.6\times 10^{-4}}\ m/s\\\\v_x=4\ m/s[/tex]
Now ,
[tex]P_x-P_y=\dfrac{\rho v_y^2}{2}-\dfrac{\rho v_x^2}{2}\\\\P_x-P_y=\rho[\dfrac{ v_y^2}{2}-\dfrac{v_x^2}{2}]\\\\P_x-P_y=1000\times [\dfrac{ 4^2}{2}-\dfrac{0.8^2}{2}]\\\\P_x-P_y=7680\ Pa[/tex]
Difference in pressure between X and Y is most near to 7700 Pa.
Hence, this is the required solution.
Two forces are applied to a car in an effort to accel-
erate it,
a. What is the resultant of these two forces?
b. If the car has a mass of 3200 kg, what accelera-
tion does it have? Disregard friction
Answer:
R=2F
Explanation:
As the forces are in same direction so the resultant force will be:
R=F+F
R=2F
A moving object is in equilibrium. Which best describes the motion of the object if no forces change?
O It will change directions.
O It will slow down and stop.
O It will maintain its state of motion.
O It will speed up and then slow down.
Answer:
It will maintain its state of motion
Explanation:
The object would maintain its state of motion.
What does it mean when an object is in equilibrium?If the size and direction of the forces acting on an object are exactly balanced, then there is no net force acting on the object and the object is said to be in equilibrium.
What does equilibrium mean in physics?Equilibrium, in physics, the condition of a system when neither its state of motion nor its internal energy state tends to change with time.
Learn more about equilibrium here https://brainly.com/question/13414142
#SPJ2
A truck covers 40.0 m in 7.10 s while uniformly slowing down to a final velocity of 2.05 m/s.
(a) Find the truck's original speed. _______ m/s
(b) Find its acceleration. __________ m/s^2
Answer:
(A) Original speed= 9.22 m/s
(B) Acceleration= -1.0099 m\s^2
Explanation:
A truck covers 40m in 7.10 secs
The truck slows down at a uniform velocity of 2.05 m/s
(A) The original speed can be calculated as follows
Vo= 2(40)/7.10 - 2.05
= 80/7.10 - 2.05
= 11.2676 - 2.05
= 9.22m/s
(B) The acceleration can be calculated as follows
a= Vf-Vo/t
= 2.05-9.22/7.10
= -7.17/7.10
= -1.0099m/s^2
2. Elements in the same group have similar properties because they have O the same number of protons O the same number of valence electrons O the same number of energy levels with electrons O the same total number of electrons
The world record for the fastest train on Earth was set by abullet train from Tokyo to Osaka in Japan. Without passengers,it can travel at a speed of 300 km/hr. How many centimeters
per second can it travel?
cm/sec. *round to nearest whole number *
Answer:
8333
Explanation:
300km/hr = 300/60 = 5 km per min
5km/min = 5/60 = .08333333km per sec
km to cm = 100000, so
.083333 * 100000 = 8333
The train would travel at a speed of 8333.33 centimeters/second.
What is speed?The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.
As given in the problem the world record for the fastest train on Earth was set by a bullet train from Tokyo to Osaka in Japan. Without passengers, it can travel at a speed of 300 kilometers/hour,
1 kilometer = 1000 meters
1 meter = 100 centimeters
300 kilometers = 300×100000 centimeters
the speed of the fastest train = 300×100000 centimeters /3600 seconds
= 8333.33 centimeters/second
Thus, the speed of the fastest train would be 8333.33 centimeters/second
To earn more about speed from here, refer to the link;
brainly.com/question/7359669
#SPJ2
which term refers to a variable that is not allowed to change during an experiment
Answer:
controlled variable
Explanation:
here you go
A control variable refers to a variable that is not allowed to change during an experiment.
What is the control variable?A control variable or scientific constant can be described as an experimental element that is constant and unchanged throughout the course of the investigation in scientific experimentation.
Control variables can strongly affect experimental results where they are not held constant during the experiment in order to test the relative relationship between the dependent and independent variables.
A variable is held constant in order to assess the relationship between multiple variables in an experiment and is a control variable. A control variable is not changed throughout an experiment because its constant state allows the relationship between the other variables. A control variable is what is kept constant throughout the entire experiment.
Therefore, a variable that is not allowed to change during an experiment is a controlled variable or scientific constant.
Learn more about control variable, here:
https://brainly.com/question/17555102
#SPJ5
If the weight of displaced liquid and the weight of an object are the same, the object will:
(A) sink
(B) float
(C) float, but partially submerged
Answer:
c
Explanation:
I think but if I'm wrong I'm sorry
Answer:
i think its float
Explanation:
1) Describe how the atoms of a solid differ from the atoms of a liquid.
Answer:
liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
The atoms of solids and liquids are different from each other in many ways as discussed below.
We have a solid and a liquid.
We have to describe how the atoms of a solid differ from the atoms of a liquid.
What is Atom?An Atom smallest unit into which matter can be divided without the release of electrically charged particles.
According to the question, the following differences exists between the atoms of solids and liquids -
In solids the atoms are tightly packed while in liquid they are loosely packed.In solids the density of atoms within a specific volume is very high while in liquid it can be either high or low.In solids, atoms are not free to move and they can only oscillate about their mean position while in liquid the atoms are free to move.Hence, it can be seen that the atoms of solids and liquids are quite different from each other.
To learn more about the Structure of matter, visit the link below-
https://brainly.com/question/1675047
#SPJ2
an athlete runs around a 400m race track four times it takes him 400s to complete his run
Answer: its taking him 100s to run around the track once
Explanation:
Urgent
Please write the complete answer
Multiply field strength (N/kg) by mass (kg) to get weight (N)
At the start, the car is carrying
4.7 kg * (9.8 N/kg) = 46.06 N
of fuel.
At the end, it is carrying
3.0 kg * (9.8 N/kg) = 29.4 N.
Assuming the car remains completely intact, its weight was reduced by
46.06 N - 29.4 N = 16.66 N.
A ray of light strikes a plane mirror at an angle of incidence of 60°, is reflected from the mirror and then strikes a second plane mirror placed so that the angle beftween the mirrors is 45°. The angle of reflection at the second mirror, in degrees, is
A 15
B 25
C 45
D 65
E 75
plz help me guys ASAP!
Answer:
60 - 45 = A. 15
Explanation:
Subtracted because the plane mirror at an angle is incidence of 60°, so then in order to find the value it would be 60-45 and not adding it or dividing and multiplying to find the value thus the answer is 15.
60 - 45 = A. 15. Subtracted because the plane mirror at an angle is incidence of 60°, so then in order to find the value it would be 60-45 and not adding it or dividing and multiplying to find the value thus the answer is 15.
What is Plane mirror?A flat or highly polished surface called a plane mirror reflects light or waves to create an image. It is a polished, smooth surface that creates a virtual representation of the actual object.
A plane mirror is a surface on which an image can only be produced by at least two light beams. The intersection of these two beams can occur inside the mirror or appear to occur somewhere behind the mirror.
The image that follows illustrates how an object appears when viewed via a plane mirror.
Therefore, 60 - 45 = A. 15. Subtracted because the plane mirror at an angle is incidence of 60°, so then in order to find the value it would be 60-45 and not adding it or dividing and multiplying to find the value thus the answer is 15.
To learn more about Plane mirror, refer to the link:
https://brainly.com/question/13101215
#SPJ2
2. Convert 750 m/s to km/hr.
Answer:
2700
Explanation:
1m/s=3.6km/hr
A city bus travels six blocks east and eight blocks north east wok is 100 m long is a bus travels as distance and 15 minutes what is the average speed on the bus
Answer:
the average speed on the bus = 1.55 m/s
Explanation:
From the information we are being provided with ;
a city block travels 6 blocks due east
and 8 blocks due north
the length of the individual blocks = 100m
As such their respective distance will be
distance (d) traveled due east direction by bus = 6 × 100 = 600 m
distance (d) traveled towards the north direction by bus = 8 × 100 = 800 m
The total distance covered = (600+ 800)m
= 1400 m
However, it requires 15 minutes to travel this distance by bus.
Thus,
the average speed = distance/ time
the average speed on the bus = 1400 m / (15 × 60) s
the average speed on the bus = 1400 m / 900 s
the average speed on the bus = 1.55 m/s
A 2011 Porsche 911 Turbo S goes from 0-27 m/s in 2.7 seconds. What is the
car's acceleration?
0 to 60 mph in 4.5 seconds
Explanation:
hey can anyone pls help me out in dis !
All of the above.
For example:
A glass plate is a solid. Particles vibrate in a solid and are closely packed. together.
It doesn’t change shape if you touch it.
It doesn’t change volume like it’s water.
Answer:
D: all of the above
Explanation:
particles in a solid do vibrate but they're tightly packed and move around fixed location
What is the momentum of A 200 kg shark swimming at 15 m/s
Answer:
3000 kg meter per sec
Explanation:
Momentum of an object refers the motion of an object. Momentum depends upon mass and velocity both.
Formula to calculate the momentum of any object is,
Momentum = Mass × Velocity
By substituting values of mass and velocity of the shark from the question,
Momentum of shark = 200 × 15
= 3000 kg meter per second
Therefore, shark weighing 200 kg has the momentum as 3000 kg meter per seconds.
Physical Science is the study of
Answer:
Physical science is the study of the inorganic world. That is, it does not study living things. (Those are studied in biological, or life, science.) The four main branches of physical science are astronomy, physics, chemistry, and the Earth sciences, which include meteorology and geology.
Explanation:
Which of the following is NOT a reason why
mathematics is valuable in science?
how long a boy will take to run round a square field of side ,35 if he run at the rate of 9km/hr
Answer: it will take 15 minutes
Answer:
It will take the boy 136 hours 11 minutes.
Explanation:
35 × 35 = 1225km is the area of the square.
Now find how long it will take the boy:
1225 ÷ 9 = 136.11
Which is 136 hours 11 minutes.
A 0.5 kg yellow bouncy ball rolls to the right at a speed of 8 m/s while a 0.25 kg blue bouncy ball rolls
to the left towards it with a speed of 4 m/s. After the collision, the blue bouncy ball rolls to the right
with a speed of 12 m/s. How fast is the yellow ball rolling and in what direction?
Explanation:
Let yellow ball be m1 = 0.5kg with u1 = 8 m/s and blue ball be m2 = 0.25 kg with u2 = - 4 m /s respectively.
After collision, blue ball travels 12 m/s.
Using conservation of Linear Momentum :
m1u1 + m2u2 = m1v1 + m2v2
0.5* 8 + 0.25 * - 4 = 0.5 * v1 + 0.25 * 12
v1 = 0 m/sec i.e. Yellow ball comes to rest.
Which accident will be more damaging, collision between two trucks
moving with a speed 50 km/hr or collision between two cars moving with a speed of 50 km/hr? Explain.
Answer:
collision between truck
Explanation:
Answer. Collision between trucks, because more is the mass, more is the inertia and therefore more is the momentum. Mass of the trucks is more than that of cars so collision of trucks will cause more damage.
What is a core sample ????
Answer:
Core samples are small portions of a formation taken from an existing well and used for geologic analysis. The sample is analyzed to determine porosity, permeability, fluid content, geologic age, and probable productivity of oil from the site. ... Core samples reveal the physical and chemical nature of the rock.
What is the kinetic energy of a 150 kg object that is moving at a speed of 5
m/s?
Answer:
Kinetic Energy=1/2×m×v^2,Where m=mass,v=velocity. So, kinetic energy of the object=1/2×150×15^2 = 16875 kg m^2 s^-2 .
Explanation:
math lol
Help me please it due today at 11:59 pleasss
Answer:
see below
Explanation:
1. density = mass / volume
2. kg/mL, g/cm³
3. volume = mass / density
4. mass = density x volume
5.
d = m / v
d = 32.9 g / 45.78 mL
d = 0.72 g/mL
6.
vol = m / d
vol = 0.62 g / 120g/cm³
vol = 0.00517 cm³
7.
m = v * d
m = 2.07 g/mL * 60.9 mL
m = 126.063 g
why is unit of force called derived unit
Answer:
because these units are derived from combinations of two or more of the seven base units
CAN YOU THE 3 QUESTIONS ILL PUT U AS BRAINLEST!!!!
Answer: 1. 5 1/6 m/s 2. Traveling Left 3. 0.45
Explanation:
Please mark Brainliest!!!