Answer:
Earth's gravity
Explanation:
hope this helps
Answer:
the earth gravity
Explanation:
Gravitational attraction provides the centripetal force needed to keep planets in orbit around the Sun and all types of satellite in orbit around the Earth. The Earth's gravity keeps the Moon orbiting us.
What happens when you sit in a chair?
A. The chair pushes back on you.
B. The chair does not push back on you.
C. There is no force being exerted.
D. The chair pushes in the same direction as you.
A 0.35-kg ball attached to a string is rotating in a horizontal circle of radius 0.43 m. Assume the tension force is directed horizontally. If the ball revolves twice every second, what is the tension in the string?
I need help with science and I need a 4-10 sentences on this:
Explain what makes the offspring of a living thing resemble its parent.
How much resistance is required to limit the current from a 12 V battery to 3.6 mA?
Answer:
3333.3 ohm
Explanation:
V=IR so R =V/I (in Ampere) so convert 3.6 mA to 3.6*10^-3 A
so R =12/3.6*10^-3 =3333.3
Which of the following involves an endothermic reaction
Answer:
A
Explanation:
Photosynthesis requires energy to drive the chemical reaction. Photosynthesis is an endothermic reaction. This means it cannot occur without energy (from the Sun).
a) The velocity with which the basketball is thrown and its time to reach the basket if thrown at angle of 45 degrees.
b) The velocity with which the basketball is thrown and its time to reach the basket if thrown at angle of 60 degrees.
c) The velocity with which the basketball is thrown and its time to reach the basket if thrown at angle of 30 degrees.
Please list the given, find, equations used, and steps to solve.
Answer: I think the answer is b
Explanation:
In Bohr's model, the position of the electron (with the monochromatic light on)... Group of answer choices is restricted to orbits or certain radii, but the electron may be observed between these orbits when it moves. is restricted to orbits of certain radii around the nucleus. The position may change, but it must be in one of these orbits. is not constrained. The electron may be found anywhere outside of the nucleus.
Answer:
True. it is restricted to the orbits of certain radii around the nucleus.
The position can change, but it must be in one of these orbits
Explanation:
In this exercise some affirmations are given and you must select which ones are correct, for this we review the Bohr atomic model that has the following postulates:
* the orbits are circular
* Only certain orbits are stable, stationary state
* the radiation emitted is the difference in energy between two stable orbits
* the size of the orbit is given by the quantization of the angular momentum
L = n [tex]\hbar[/tex]
When reviewing the different statements, the correct one is:
* it is restricted to the orbits of certain radii around the nucleus.
The position can change, but it must be in one of these orbits
A sinusoidal wave is reflected at the surface of a medium whose properties are such that half the incident energy is absorbed. Consider the field that results from the superposition of the incident and the reflected wave. An observer stationed somewhere in this field finds the local electric field oscillating with a certain amplitude E. What is the ratio of the largest such amplitude noted by an observer to the smallest amplitude noted by any observer
Answer:
[tex]\frac{Ei + Er}{Ei-Er}[/tex]
Explanation:
Ratio of the largest amplitude to the smallest amplitude is called voltage standing wave ratio ( along a transmission line )
Determine the ratio of the largest such amplitude noted by an observer tot the smallest amplitude
Expression for VSWR
VSWR = [tex]\frac{1 + \sqrt{\frac{Pr}{Pi} } }{1 - \sqrt{\frac{Pr}{Pi} } }[/tex] where ; Pr = reflected power , Pi = Incident power
hence the ratio of the largest amplitude to the smallest amplitude
= [tex]\frac{Emax}{Emin}[/tex] = [tex]\frac{Ei + Er}{Ei-Er}[/tex] where ; Ei = amplitude of incident wave, Er = amplitude of reflected wave
describe the relationship of the atoms shown above
choices:
Answer:
I don't know.
Brainliest!!! Write: Forces are all around us. Imagine that your teacher has asked you to teach a lesson to your peers about forces. Explain, in detail, how you experience forces in your everyday life. Give 3 examples
If you drag a bag across floor, you are experiencing a friction force
if you throw a paper or feather up, it floats side ways slowly. It is called air Resistance.
if you push or pull a Door, it is Normal force.
I hope this helped!
have an amazing Day!!
A submarine is 309 m horizontally from the shore of a freshwater lake and 105 m beneath the surface of the water. A laser beam is sent from the submarine so that the beam strikes the surface of the water 227 m from the shore. A building stands on the shore, and the laser beam hits a target at the top of the building. The goal is to find the height of the target above sea level.
Required:
a. Draw a diagram of the situation, Identifying the two triangles that are important in finding the solution.
b. Find the angle of incidence of the beam striking the water-air interface.
c. Find the angle of refraction.
d. What angle does the refracted beam make with the horizontal?
e. Find the height of the target above sea level.
Answer:
Explanation:
a) See the attached file for diagram . The two triangles are ABC and DEC .
b )
Angle of incidence = i
Tan i = ( 309 - 227 ) / 105
= 82 / 105 = .78
i = 38°
c )
Sin i / sinr = 1 / μ where μ is refractive index of water .
Sin i / sinr = 1 / μ = 1 / 1.33
sin 38 / sinr = .7518
.6156 / sinr = .7518
sinr = .6156 / .7518
.819
r = 55°
d )
angle the refracted beam makes with the horizontal = 90 - 55 = 35°
e )
h / 227 = Tan 35
h = 227 x Tan 35
= 159 m
Height required = 159 m .
a mid-oceanic might be compared to what continental landform
Answer:
mountain range:)
Explanation:
determine the number of milliliters in a volume of 2.81 fluid ounces
A 1500 kg car traveling at 30 m/s hits a stationary 1200 kg car. If they stick together on collision, what is the final velocity of the two cars?
Answer:
16.67 m/s
Explanation:
Let that velocity be v.
Using conservation of momentum:
Initial momentum = final momentum
momentum of car1 = momentum of cars
mass1 x velocity1 = (m1 + m2)v
1500*30 = (1500 + 1200)v
45000/2700 = v
16.67 m/s = v
A car's bumper is designed to withstand a 7.20 km/h (2.0 m/s) collision with an immovable object without damage to the body of the car. The bumper cushions the shock by absorbing the force over a distance. Calculate the magnitude of the average force (in N) on a bumper that collapses 0.195 m while bringing a 830 kg car to rest from an initial speed of 2.0 m/s.
Answer:
8512 N
Explanation:
From the work energy theorem we know that: The net work done on a particle equals the change in the particles kinetic energy:
[tex]W=\Delta K=K_{f}-K_{i} \\ \\qquad \begin{array}{r} W=F \cdot d, \Delta K=\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2} \\ F \cdot d=\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2}[/tex]
Where:
-W is the work done by the force.
- F is the force actin on the.
- d is the distance travelled.
- m is the mass of the car.
- [tex]v_{f}, v_{i}[/tex] are the final and the initial velocity of the car
[tex]K_{f}, K_{i}[/tex] are the final and the kinetic energy of the car.
Givens: [tex]m=830 \mathrm{~kg}, v_{i}=2 \mathrm{~m} / \mathrm{s}, v_{f}=0 \mathrm{~km} / \mathrm{h}, d=0.195 \mathrm{~m}[/tex]
Plugging known information to get:
[tex]F \cdot d &=\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2} \\ F &=\frac{\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2}}{d} \\ &=\frac{0-\frac{1}{2} \times 830 \times 2^{2}}{0.195} \\ &=8.512 \times 10^{3} \\ F &=8.512 \times 10^{3} \mathrm{~N}[/tex]
A Christmas light is made to flash via the discharge of a capacitor. The effective duration of the flash is 0.25 s (which you can assume is the time constant of the capacitor), during which it produces an average 55 mW from an average voltage of 3.1 V. 25% Part (a) How much energy, in joules, does it dissipate? E 25% Part (b) How much charge, coulombs, moves through the light? q= 1 25% Part (c) Find the capacitance of the light, in farads. C = 1 25% Part (d) What is the resistance, in ohms, of the light? R= |
Answer:
The correct solution is:
(a) [tex]1.375\times 10^{-2} \ J[/tex]
(b) [tex]4.43\times 10^{-3} \ C[/tex]
(c) [tex]1.42\times 10^{-3} \ F[/tex]
(d) [tex]178.57 \ \Omega[/tex]
Explanation:
The given values are:
Effective duration of the flash,
ζ = 0.25 s
Average power,
[tex]P_{avg}=55 \ mW[/tex]
[tex]=55\times 10^{-3} \ W[/tex]
Average voltage,
[tex]V_{avg}=3.1 \ V[/tex]
Now,
(a)
⇒ [tex]E=P_{avg}\times \zeta[/tex]
On substituting the values, we get
⇒ [tex]=55\times 10^{-3}\times 0.25[/tex]
⇒ [tex]=1.375\times 10^{-2} \ J[/tex]
(b)
⇒ [tex]E=Q\times V_{avg}[/tex]
then,
⇒ [tex]Q=\frac{E}{V_{avg}}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{1.375\times 10^{-2}}{3.1}[/tex]
⇒ [tex]=4.43\times 10^{-3} \ C[/tex]
(c)
⇒ [tex]C=\frac{Q}{V}[/tex]
⇒ [tex]=\frac{4.43\times 10^{-3}}{3.1}[/tex]
⇒ [tex]=1.42\times 10^{-3} \ F[/tex]
(d)
As we know,
⇒ [tex]R=\frac{1}{4C}[/tex]
⇒ [tex]=\frac{1}{4\times 1.42\times 10^{-3}}[/tex]
⇒ [tex]=\frac{1000}{5.6}[/tex]
⇒ [tex]=178.57 \ \Omega[/tex]
A solid sphere of radius R, a solid cylinder of radius R, and a rod of length R all have the same mass, and all three are rotating with the same angular velocity. The sphere is rotating around an axis through its center. The cylinder is rotating around its long axis, and the rod is rotating around an axis through its center but perpendicular to the rod. 1) Which one has the greatest rotational kinetic energy
Answer:
I(sphere) = 2/5 M R^2
I(rod) = 1/3 M L^2
I(cylinder) = 1/2 M R^2
From the information given I would assume that
the cylinder is the correct answer.
Please Help!!!!!
Belinda observes that the reaction 2H2O+O2=2H2O2 appears to have stopped, because the concentrations of reactants and products are not changing. Which statement is true at this point in the reaction
A P E X
Answer: Molecules of H202, H20 and 02 are still forming. ( A P E X )
Explanation: I know this is late but for anyone looking at this later
The above question is incomplete, I think the original question is
Belinda observes that the reaction 2H20+02 2H2O2 appears to have stopped because the concentrations of reactants and products are not changing. Which statement is true at this point in the reaction?
A. Molecules of H₂O₂ are formed only when the reaction vessel is disturbed.
B. Molecules of H2O2 have stopped forming.
C. Molecules of H20 and O₂ have stopped forming.
D. Molecules of H2O2, H2O, and O2 are still forming.
At this point in the reaction, the system has reached a state of equilibrium i.e there is no net change in the concentrations of reactants and products. So the Molecules of H2O2 have stopped forming. The correct option is B.
What is the state of equilibrium?In chemistry, a state of equilibrium refers to a situation where the concentrations of reactants and products in a chemical reaction are no longer changing over time.
This occurs when the rates of the forward and reverse reactions are equal, and there is no net change in the concentrations of reactants and products.
At equilibrium, the system is in a dynamic state, where the forward and reverse reactions continue to occur, but at the same rate, resulting in no overall change in the concentrations of the species involved in the reaction. The equilibrium state is typically characterized by the equilibrium constant, which is a measure of the relative concentrations of reactants and products at equilibrium for a given reaction under specific conditions of temperature, pressure, and concentration.
Here in this question,
The molecules of H2O2 have stopped forming. This means that the forward reaction (2H2O + O2 → 2H2O2) and the reverse reaction (2H2O2 → 2H2O + O2) are occurring at the same rate, resulting in no net change in the concentration of H2O2. However, molecules of H2O and O2 are still being consumed and produced as they are involved in the reaction, but their concentrations are not changing because they are being replenished at the same rate that they are being consumed.
Therefore, the correct answer is B i.e Molecules of H2O2 have stopped forming.
To learn about redox reactions click:
https://brainly.com/question/13293425
#SPJ3
What two things can change when an object accelerates?
Answer:
speed and velocity or direction.
indicate the types of mechanical energy that are present in the following situation. a punk sliding along level ice and is slowing down.
a) Kinetic Energy
b) Potential Energy
c) Both
d) Neither
Answer:
c
Explanation:
It contains both kinetic and potential energy.
Archimedes' Principle states that a. the velocity of a fluid is directly proportional to the pressure exerted on the fluid. b. the pressure of a fluid is inversely proportional to the temperature of the fluid. c. the pressure in a fluid is directly related to the depth below the surface of the fluid. d. an object immersed in a fluid is buoyed up by a force equal to the weight of the displaced fluid.
Answer:
d. an object immersed in a fluid is buoyed up by a force equal to the weight of the displaced fluid.
PLEASE HELP ME WITH THIS ONE QUESTION
You have 1 kg of water and you want to use that to melt 0.1 kg of ice. What is the minimum temperature necessary in the water, to just barely melt all of the ice? (Lf = 3.33 x 105 J/kg, cwater 4186 J/kg°C)
Answer: [tex]7.95^{\circ}C[/tex]
Explanation:
Given
Mass of water is [tex]m_1=1\ kg[/tex]
mass of ice is [tex]m_2=0.1\ kg[/tex]
Latent heat of fusion [tex]L=3.33\times 10^5\ kJ/kg[/tex]
The heat capacity of water is [tex]c_{w}=4186\ J/kg^{\circ}C[/tex]
Suppose water is at [tex]T^{\circ} C[/tex] and it reaches to [tex]0^{\circ}C[/tex] to melt the ice
the heat released by water must be equivalent to heat absorbed by the ice
[tex]\therefore \quad m_1c_w(T-0)=m_2\times L\\\Rightarrow 1\times 4186\times T=0.1\times 3.33\times 10^5\\\Rightarrow T=7.95^{\circ}C[/tex]
Making instruments to transmit sound is an important technological advancement. Of a designer wants to transmit sound as quickly as possible through a wire made of one of these substances, which substance would she choose?
Answer:
b.lead
Explanation:
Answer:
B)Lead
Explanation:
I did the usatestprep
A town requiring 2.0 m3/s of drinking water has two sources, a local well with 15 g/m3 nitrate (as N) and a distant reservoir with 5 g/m3 nitrate (as N). What flow rates of well and reservoir water are needed to meet the EPA drinking water standard and minimize the use of more expensive reservoir water
Explanation:
Drinking water requirement in town 2.0 m^3/s of water per second
nitrate in local well nitrate per 15 [tex]\mathrm{m}^{3}[/tex] of water
nitrate in distant reservoir [tex]=5 \mathrm{~g} / \mathrm{m}^{3}[/tex]
Let the flow rate of well
flow rate of reservoir [tex]=y m^{3} / s[/tex]
Drinking water requirement is [tex]45 \mathrm{ppm}[/tex] or [tex]45 \mathrm{~g} / \mathrm{m}^{3}[/tex]
therefore, the total flow of drinking water
A thermionic tube with only a cathode and an anode is called?
PLZZZ HELP!!! 80PTS!!!
You are given a toy car and told it has a density of 0.54 g/mL and a volume of 38.2 mL. Calculate impulse, given that the toy car's acceleration is 10 m/s^2 and time is 10 s. WRITE THE NUMBER ONLY and DO NOT ROUND.
Answer:
Impulse = [tex]206.28 * 10 = 2062.8[/tex] g.m/s
Explanation:
Impulse is equal to the product of force and time
Here
Density of car = [tex]0.54[/tex] g/mL
Volume of car [tex]= 38.2[/tex] mL
Mass of the car is equal to the product of density and volume of car
Mass of the car [tex]= 0.54 * 38.2[/tex] [tex]= 20.628[/tex] grams
Acceleration of the car is [tex]10[/tex] m/s^2
Force is equal to product of mass and acceleration
F = [tex]20.628 * 10 = 206.28[/tex] g .m/s^2
Impulse = F * t
Impulse = [tex]206.28 * 10 = 2062.8[/tex] g.m/s
A certain type of decorative lamp contains colored liquids. These liquids form globs that break off and rise to the top of the liquids. The globe rises due to _____
Your answer:
conduction
convection
radiation
Answer: Convection
Explanation:
Convection can be defined as the transfer of heat energy from a fluid as hotter materials in the fluid rise up and cooler ones sink down. This results as the hot materials have low density as compared to those which are cold. In the decorative lamp the globs break out as the evaporated form of liquid rises up due to low density and the remaining cold fluid remains at the bottom as a result of convection.
Why is the answer (A)?
In details please
Explanation:
resistance of wire can be determined by this equation
R = Rho . L / A
L = the length of wire
A = the Area, A = πr²
Rho = density of resictance
we can do some rational
R1/R2 = ( Rho L1/A1) / (Rho L2/A2)
L2 is the condition when the length is doubled and
L2 = 2 x L
A2 is the condition when the diameter is doubled
A2 = 4A1
R/R2 = (L1/A1)/(L2/A2)
R/R2 = (L/A) / (2L/4A)
R/R2 = 1 / ½
R2 = ½ R.
then we use formula of Voltage
V = I R
1st condition
V = 0.3 R
2nd condition ( V is constant)
V = I2 R2
0.3 R = I2 x ½R
i2 = 0.3/ ½
i2 = 0.6 Ampere
ANSWER THIS! Which of these statements about the Sun is the result of its closeness to Earth? A) It is the only star with a gravitational pull. B) It is the largest star in the Milky Way Galaxy. C) It appears (from Earth) to be the brightest star. D) It has the lowest temperature of any star seen from Earth.
Answer:
C) It appears (from Earth) to be the brightest star.
Explanation:
This is because due to sun's brightness we can predict its distance.
I need help with science o.o:
Question 1:
An egg yolk is unicellular.
True
False
___________________________
Question 2:
Your body has more than a billion cells.
True
False
_____________________
Question 3:
Almost all cells are not microscopic.
True
False
please dont steal my points :>
Answer:
TrueTrueFalseExplanation:
this is the answer
Answer:
1.true
2true
3.false
Explanation:
espero que te ayude