The stabilizing the transition state, and reducing steric hindrance around the site of the leaving group.
Why are SN2 in the NaI in acetone reaction?The [tex]SN2[/tex] (substitution nucleophilic bimolecular) reaction between NaI and an alkyl halide in acetone solvent is promoted by several factors. These factors include:
Nucleophile strength: In the [tex]SN2[/tex] reaction, a strong nucleophile is required to attack the alkyl halide and displace the leaving group. Iodide ion[tex](I-)[/tex]is a strong nucleophile and can effectively attack the alkyl halide.Solvent polarity: The acetone solvent used in this reaction is polar, which helps to stabilize the transition state and facilitate the [tex]SN2[/tex] reaction.Leaving group ability: The leaving group in the alkyl halide should be a good leaving group to facilitate the [tex]SN2[/tex] reaction. In this case, the leaving group is a halogen atom [tex](e.g. Cl, Br)[/tex] which is a good leaving group.Steric hindrance: The degree of steric hindrance in the alkyl halide can affect the rate of the [tex]SN2[/tex] reaction. The reaction is faster when there is less steric hindrance around the site of the leaving group, which allows for easier access of the nucleophile to the carbon center.Overall, these factors promote the [tex]SN2[/tex] reaction between NaI and an alkyl halide in acetone solvent by enhancing the strength and reactivity of the nucleophile
Learn more about reducing steric
brainly.com/question/29401030
#SPJ11
when zinc metal is placed in hcl, bubbling due to formation of hydrogen gas is observed. therefore, which is more reactive: zn or h2?
Answer:zinc
Explanation:zinc is more reactive than hydrogen
Question 105
The Maximum Contaminant Level (MCL) is the highest concentration of a contaminant that is allowable in a water system.
a. True
b. False
It is true that the Maximum Contaminant Level (MCL) is the highest concentration of a contaminant that is allowable in a water system. So, option(a) is right one.
The EPA has drinking water regulations for more than 90 pollutants. MCL is the maximum contaminant level allowed in drinking water. Once the MCLG is defined, the EPA sets the applicable standards. MCL is the maximum allowable pollutant level in water supplied to all public water users.
Maximum Contaminant Level (MCL), which sets a limit value for the concentration of pollutants in drinking water. The MCL for arsenic in drinking water is 10 parts per billion (ppb). So it is clear from the above discussion that the statement is true.
For more information about concentration , visit :
https://brainly.com/question/28564792
#SPJ4
An atom of bromine has a mass about four times greater than that of an atom of neon.How many grams of neon will contain the same number of atoms as 1,000 g of bromine?A) 4 g Ne B) 250 g Ne C) 400 g Ne D) 1,000 g Ne E) 4,000 g Ne
4000 g of neon will contain the same number of atoms as 1,000 g of bromine.
Hence, the correct option is E.
The mass of one Br atom is four times greater than the mass of one Ne atom. Therefore, the number of Ne atoms that would have the same mass as 1,000 g of Br is
(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)
To find the number of Br atoms in 1,000 g Br, we divide 1,000 g Br by the molar mass of Br
1,000 g Br / 79.904 g/mol = 12.51 mol Br
One mole of any substance contains Avogadro's number (6.02 x 10^23) of particles (atoms, molecules, etc.).
Therefore, the number of Br atoms in 12.51 mol Br is
12.51 mol Br x (6.02 x 10^23 atoms/mol) = 7.53 x 10^24 Br atoms
Now we can calculate the mass of Ne that would contain the same number of atoms as 1,000 g Br
(Number of Br atoms in 1,000 g Br) x (mass of one Br atom) / (mass of one Ne atom)
= (7.53 x 10^24 atoms) x (79.904 g/mol) / (20.180 g/mol)
= 2.99 x 10^25 g Ne
Therefore, 4,000 g Ne (rounded to the nearest thousand) has same number of atoms as 1,000 g of bromine.
Hence the correct option is E.
To know more about neon here
https://brainly.com/question/20365054
#SPJ4
560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be __ 2Kelvin.
The initial and final pressures are not given, we cannot determine the exact value of [tex]T_{2}[/tex]without that information. The pressure values would be needed to complete the calculation.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It is a scalar quantity that quantifies the degree of hotness or coldness of a substance. Temperature is typically measured using various scales, such as Celsius, Fahrenheit, or Kelvin.
The new temperature of the gas after compression can be calculated using the combined gas law, which relates the initial and final conditions of a gas undergoing a change in pressure, volume, and temperature.
The combined gas law is given by:
We can rearrange the equation to solve for [tex]T_{2}[/tex]:
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be 277.05K
What is ideal gas law ?
The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles (a) do not interact with one another and (b) occupy no space (have no volume).
The law states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of a single gram of an ideal gas.
V1/T1 ⇒ V2/T2
V1 ⇒ 560ml
T1 ⇒ 43.0 C
V2 ⇒ 52ml
T2⇒?
T2 ⇒ V2T1/V1
T2 ⇒ 52*43/560
T2 ⇒ 3.9 degree C i.e. 277.05K
To learn more about ideal gas law use:
https://brainly.com/question/1056445
#SPJ1
Question 7
The major source of sulfur dioxides is:
a. Natural erosion of soils
b. Fuel combustion
c. Industrial processing
d. Road traffic
B. The major source of sulfur dioxides is fuel combustion, such as burning coal and oil in power plants and other industrial processes.
The fundamental chemical process of releasing energy from a fuel and air combination is combustion, sometimes referred to as burning. While natural erosion of soils can release small amounts of sulfur dioxide, it is not a significant contributor to the levels we see in the atmosphere. Industrial processing, such as refining metals and producing chemicals, can also release sulfur dioxide, but to a lesser extent than fuel combustion. Road traffic can contribute to air pollution, but sulfur dioxide emissions from cars and trucks are generally lower than those from industrial sources.
Learn more about combustion here:
brainly.com/question/24703998
#SPJ11
What factor determines the amount by which a solutions vapor pressure, freezing point, boiling point differ from those properties of the solvent?
The amount by which a solution's vapor pressure, freezing point, and boiling point differ from those of the pure solvent depends on the concentration of solute particles in the solution. This is known as colligative properties.
Colligative properties are physical properties of solutions that depend only on the number of solute particles in the solution, regardless of the chemical identity of the solute particles. The colligative properties include vapor pressure lowering, freezing point depression, boiling point elevation, and osmotic pressure.
For example, in the case of vapor pressure lowering, the presence of solute particles in a solution decreases the number of solvent molecules at the surface of the solution, thereby reducing the vapor pressure of the solution compared to that of the pure solvent.
The amount of vapor pressure lowering is proportional to the concentration of solute particles in the solution, but is independent of the identity of the solute particles.
Similarly, the amount of freezing point depression and boiling point elevation is proportional to the concentration of solute particles in the solution. The colligative properties are important in various fields, such as in the determination of molar mass of unknown solutes or in the process of freeze-drying of food and pharmaceuticals.
For more question on vapor pressure click on
https://brainly.com/question/30459262
#SPJ11
What is the average mass of one Ca atom?A) 40.08 amu D) 2.41 x 10-21 amuB) 40.08 g E) 2.41x1025 gC) 40.08 g/mol
The average mass of one Ca atom is approximately 40.08 amu. The correct answer is option A.
The average mass of one calcium (Ca) atom can be found using the atomic mass unit (amu) as the unit of measurement. The atomic mass of calcium is approximately 40.08 amu. This value is derived from the weighted average of the naturally occurring isotopes of calcium. It's important to note that amu is used to represent the mass of individual atoms, while grams (g) and grams per mole (g/mol) are used for larger quantities of substances.
In this case, the correct answer is A) 40.08 amu. This value represents the mass of one calcium atom, and it helps scientists determine and compare the masses of different elements and compounds. The other options, such as grams and grams per mole, are not appropriate units for measuring the mass of a single atom.
For more such questions on average mass, click on:
https://brainly.com/question/31562188
#SPJ11
When testing a distribution system for chlorine residual, you should?
a. Test samples from several different points
b. Test a sample from one point several times
c. Have a sample volume of at least 100 mL which is taken back to the laboratory
d. Use the ortho-tolidine method
a. Test samples from several different points. This is because chlorine residual can vary at different points in the system due to factors such as distance from the treatment plant and water flow.
When testing a distribution system for chlorine residuals, you should test samples from several different points. This is because chlorine residual can vary at different points in the system due to factors such as distance from the treatment plant and water flow. It is important to get an accurate representation of the chlorine residual throughout the system.
Additionally, it is recommended to test a sample from each point multiple times to ensure accuracy and consistency. The sample volume should be at least 100 mL and can be tested on-site using test kits or taken back to the laboratory. The ortho-toluidine method is one of several methods available for testing chlorine residual, but the specific method used may depend on factors such as regulatory requirements and equipment availability.
Find out more about Test samples
brainly.com/question/8946246
#SPJ11
Reactions tend to run to completion if a product
a. Has a high melting point.
b. Is precipitated as a solid
c. Is a liquid
d. Is ionic
Reactions tend to run to completion if a product precipitated as a solid. Option B is correct.
When one of the products is taken out of the reaction mixture, reactions frequently proceed to completion. If a product is precipitated as a solid, it is no longer in the reaction mixture and is effectively removed from the system. This drives the reaction to completion in order to produce more of the solid product.
On the other hand, the physical state of a product (high melting point, liquid, or ionic) does not necessarily affect the extent to which a reaction runs to completion. While a high melting point may make it difficult to remove the product from the reaction mixture, it does not necessarily prevent the reaction from reaching completion.
Hence, B.is the correct option.
To know more about reaction mixture here
https://brainly.com/question/15541433
#SPJ4
Question 61
The DPD test is commonly used for the determination of:
a. Ozone
b. Quaternary: ammonium
c. Iodine
d. Chlorine or bromine
The correct answer is d. Chlorine or bromine. The DPD test, which stands for N,N-diethyl-p-phenylenediamine, is a commonly used method for determining the concentration of free chlorine or bromine in water samples.
It works by using DPD to react with the chlorine or bromine, producing a pink color that can be measured using a spectrophotometer or colorimeter. This test is often used in water treatment facilities to monitor disinfection levels and ensure safe drinking water.
The DPD test is commonly used for the determination of:
d. Chlorine or bromine.
To know more about Chlorine click here .
brainly.com/question/14962130
#SPJ11
Which device serves the same function as the packing?
a.) Inline suction gland
b.) Packing gland
c.) Mechanical seal
d.) Lantern seal
The device that serves the same function as the packing is mechanical seal . Option (c) is correct.
Packing is the most common form of sealing used in controlling devices. A mechanical seal is considered as a method in which fluid is contained in a vessel for example: pumps and mixers, where one rotating shaft passes through one stationary housing. Mechanical seal is of comparatively low cost. These kind of seals lasts longer than packing.
Therefore, mechanical seals are generally preferred over the commonly used traditional packing seals in applications which controls or prevents leakage problems .Some other advantages of mechanical seals are that these seals are more durable and they use multiple sealing points in order to eliminate any kind of leakage.
Thus, the correct option is (c)
To know more about packing seal here
https://brainly.com/question/17404727
#SPJ4
Chemical leaveners used in muffins and why
Chemical leaveners, such as baking powder and baking soda, are commonly used in muffin recipes to provide a light, airy texture.
Baking powder is a combination of an alkaline compound (typically sodium bicarbonate) and an acidic compound (such as cream of tartar), while baking soda is pure sodium bicarbonate.
These leaveners work through a chemical reaction that releases carbon dioxide gas when combined with moisture and heat during the baking process.
The gas forms bubbles in the batter, causing it to expand and rise, resulting in a fluffy, tender muffin. The choice of leavening agent depends on the ingredients and desired taste, as baking soda requires an acidic component (like buttermilk) to activate,
while baking powder is self-contained and works with non-acidic liquids. In summary, chemical leaveners are essential for creating the desired texture in muffins by producing gas bubbles that cause the batter to rise.
To learn more about : leaveners
https://brainly.com/question/30762079
#SPJ11
Starting with a 2n=32 cellStarting with a 2n=32 cell, at the end of meiosis II there will befour cells, each n=32two cells, each n=32two cells, each 2n=16four cells each 2n=16four cells, each n=16
Starting with a 2n=32 cell, at the end of meiosis II there will be four cells, each n=16.
Starting with a 2n=32 cell, meiosis will result in the formation of four cells at the end of meiosis II. In meiosis I, the chromosome number is reduced by half from 2n to n. So, the initial 2n=32 cell will have two sets of 16 chromosomes. During meiosis I, the homologous chromosomes will separate, resulting in two haploid cells, each with n=16 chromosomes.
In meiosis II, the sister chromatids will separate, resulting in the formation of four cells. Since each cell now has only one copy of each chromosome, the chromosome number remains n=16. Therefore, the answer is four cells, each n=16.
It is important to note that meiosis results in genetic diversity due to crossing over during meiosis I and random alignment of chromosomes during meiosis II. This genetic variation is important for evolution and the survival of species. Additionally, errors during meiosis can lead to chromosomal abnormalities such as Down syndrome, which occurs when there is an extra copy of chromosome 21.
For more such questions on meiosis II, click on:
https://brainly.com/question/30150685
#SPJ11
it is possible for a muon to be captured by a proton to form a muonic atom.a muon is identical to an electron except for its mass, which is 105.7 mev /c. (a) calculate the radius of the first bohr orbit of a muonic atom. (b) calculate the magnitude of the lowest energy state. (c) what is the shortest wavelength in the lyman scries for this atom?.
A muonic atom is created when a muon, which has a mass of 105.7 MeV/c, combines with a proton. Muons and electrons are similar in nature, but muons are more massive than electrons.
Answers of the given questions are below :
(a) The radius of the first Bohr orbit of a muonic atom can be calculated using the formula for the Bohr radius:
r = ε₀h² / πmeμ
where ε₀ is the vacuum permittivity, h is Planck's constant, me is the mass of the electron, and μ is the reduced mass of the muonic atom.
Using the given mass of the muon and the mass of the proton, we can calculate the reduced mass:
μ = meMp / (me + Mp) = 186.6 MeV/c²
Substituting the values and solving for r, we get:
r = 0.00054 nm
(b) The magnitude of the lowest energy state can be calculated using the formula:
E = -μe⁴/8ε₀²h²n²
where e is the elementary charge and n is the principal quantum number.
For n=1, we get:
E = -207.2 eV
(c) The shortest wavelength in the Lyman series can be calculated using the formula:
1/λ = R∞(1/n₁² - 1/n₂²)
where R∞ is the Rydberg constant and n₁ and n₂ are the initial and final quantum numbers, respectively.
For the Lyman series, n₁=1 and n₂=2. Substituting the values and solving for λ, we get:
λ = 187.5 nm
To know more about the muonic atom refer here :
https://brainly.com/question/28529640#
#SPJ11
an agno3 (aq) solution is electrolyzed using a current of 0.65 a. what mass, in grams, of ag is plated out after 20. min? group of answer choices no correct answer 0.78 0.98 0.67 0.87
The current 0.65 A and time 20 min = 1200 seconds. We also need the atomic mass of silver Ag, which is 107.87 g/mol. Finally, we need to use Faraday's constant, which is 96,485 coulombs per mole of electrons. mass in grams = current in amperes x time in seconds x atomic mass in grams / Faraday's constant.
The mass of Ag plated out after electrolysis can be calculated using Faraday’s law of electrolysis which states that the mass of a substance produced at an electrode during electrolysis is directly proportional to the quantity of electricity passed through the cell and inversely proportional to the equivalent weight of the substance. The equivalent weight of Ag is 108 g/mol. mass = current × time × atomic weight / number of electrons × Faraday Constan where, current = 0.65 A time = 20 min = 1200 s atomic weight = 108 g/mol number of electrons = 1 since Ag+ ion gains one electron to form Ag Faraday constant = 96,485 C/mol mass = 0.65 A × 1200 s × 108 g/mol / 1 × 96485 C/mol mass ≈ 0.78 g Therefore, the mass of Ag plated out after 20 minutes is approximately 0.78 g.
learn more about electrons here.
https://brainly.com/question/6663044
#SPJ11
3.1. If the primary concern for a structure is fire resistance, one should use A. post and beam framing. B. heavy timber framing. C. platform framing.
D. balloon framing.
If the primary concern for a structure is fire resistance, one should use B.
Answer - If the primary concern for a structure is fire resistance, one should use heavy timber framing. This type of framing is made up of large, solid wood members that can withstand high temperatures and remain stable in case of a fire. that have a slower burn rate and better fire resistance compared to other framing techniques.Post and beam framing, platform framing, and balloon framing do not offer the same level of fire resistance as heavy timber framing.
to know more about fire resistance, click on this -
brainly.com/question/11471571
#SPJ11
A. H2OB. NH3C. BH3D. CH4E. SiH4Which has a trigonal-pyramidal molecular geometryâ
The molecule that has a trigonal-pyramidal molecular geometry is B. [tex]NH_{3}[/tex]
To understand why [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry, we need to look at its Lewis structure. The nitrogen atom has five valence electrons, and each hydrogen atom has one valence electron. Therefore, the total number of valence electrons in [tex]NH_{3}[/tex] is 8. In the Lewis structure, the nitrogen atom is placed in the center with three hydrogen atoms surrounding it, each forming a single covalent bond with the nitrogen atom. This structure has one lone pair of electrons on the nitrogen atom.
To determine the molecular geometry, we use the VSEPR theory, which states that electron pairs around a central atom will arrange themselves in such a way as to minimize repulsion. In [tex]NH_{3}[/tex], there are four electron pairs around the nitrogen atom - three bonding pairs and one lone pair. The bonding pairs repel each other, as do the lone pair and bonding pairs. The repulsion causes the molecule to take on a trigonal-pyramidal shape, with the three hydrogen atoms at the base and the lone pair at the apex of the pyramid.
In summary, [tex]NH_{3}[/tex] has a trigonal-pyramidal molecular geometry because of the repulsion between the bonding and lone pairs of electrons around the nitrogen atom. Therefore, Option B is correct.
Know more about Lewis Structure here:
https://brainly.com/question/20300458
#SPJ11
At -32.7 °C, a gas takes up 0.750 mL. What temperature, in °C, would be needed to reduce the volume to half that amount?
Chemical Agents inMicrobial Control
•Occur in the liquid, gaseous, or solid state
•Range from disinfectants and antiseptics to sterilants and preservatives
•____ _____: chemicals dissolved in pure water as the solvent
•_______:chemicals dissolved in pure alcohol or water-alcohol mixtures
• Aqueous solutions: chemicals dissolved in pure water as the solvent
• Tinctures: chemicals dissolved in pure alcohol or water-alcohol mixtures.
Aqueous solutions and tinctures are two common types of chemical agents used in microbial control. Aqueous solutions are often used as disinfectants and antiseptics, while tinctures are more commonly used as antiseptics due to their ability to dissolve in both water and alcohol.
The effectiveness of these chemical agents in controlling microbial growth depends on a variety of factors, including the concentration of the agent, the length of exposure time, and the type of microbe being targeted.
For more question on Aqueous solutions click on
https://brainly.com/question/19587902
#SPJ11
2.6. A mortar mixture of portland cement, sand, and water, but no hydrated lime, would probably produce a mortar with A. greater strength and workability.
B. insufficient bonding strength. C. little resistance to moisture penetration.
D. insufficient water retention.
B. insufficient bonding strength.
Hydrated lime is often added to mortar mixes to improve bonding strength between the bricks or stones being used. Without hydrated lime, the mortar may not bond well to the building materials, resulting in a weaker overall structure. While the absence of hydrated lime may slightly increase the strength and workability of the mortar, it is not worth sacrificing bonding strength.
The mortar may also have little resistance to moisture penetration without the addition of hydrated lime. Insufficient water retention may also be a possibility, but it is not as significant a concern as inadequate bonding strength.
To know more about portland cement, click here:-
https://brainly.com/question/30184879
#SPJ11
write in word equation When zinc (Zn) is reacted with a solution of copper (II) sulfate (CuSO4), copper (Cu) and a solution of zinc sulfate (ZnSO4) is formed
The word equation for the given reaction is:
Zinc + Copper (II) Sulfate → Copper + Zinc Sulfate
The chemical interaction between zinc (Zn) and a solution of copper (II) sulfate is described by the word equation that is presented. In this reaction, the copper ions from the copper sulfate solution are reduced, which means they gain electrons, while the zinc metal is oxidized, which means it loses electrons.
Copper (Cu) and zinc sulfate are the two products that are produced as a result of the reaction. Zinc sulfate is a white crystalline solid that is soluble in water, whereas copper is a reddish-brown metal that is solid at normal temperatures.
The stoichiometry of the reaction—that is, the proportion of reactants to products in terms of the number of moles—is revealed by the coefficients in the balanced equation.
learn more about zinc sulfate here
https://brainly.com/question/29708158
#SPJ1
when you tip a syrup bottle upside down, it takes a long time for the syrup to move down. explain this using the ideas of viscosity, adhesion and cohesion
The syrup moves down the bottle slowly when it is turned upside down as a result of the high viscosity, cohesion, and stickiness.
Gravity pulls the syrup downhill when the syrup bottle is turned on its side. The syrup does not, however, readily flow out of the bottle due to its high viscosity.
It is challenging for the syrup molecules to slip past one another and flow out of the bottle due to the high cohesiveness between them. Furthermore, it is challenging for the syrup to separate from the bottle and flow out due to the high adhesion between the molecules of the syrup and the surface of the bottle.
The ideas of viscosity, adhesion, and cohesion can be used to explain the syrup's gradual descent down the bottle when it is turned upside down.
The term "viscosity" describes a fluid's reluctance to flow. Syrup has a high flow resistance since it is a highly viscous liquid. Cohesion is the attraction of the same molecules, whereas adhesion is the attraction of distinct molecules.
Syrup's molecules are highly attracted to one another and to the surfaces of the bottle, resulting in high cohesion and adhesion, respectively.
learn more about viscosity here
https://brainly.com/question/2568610
#SPJ1
Question 104
The final rinse water temperature of a heat sanitizing warewashing machine should cause the surface of the dishes and utensils to reach which temp?
a. 180F
b. 160F
c. 175F
d. 210F
The right response is a. 180F. In order to guarantee that the surface of the dishes and utensils reaches a temperature high enough to properly sanitise them, the final rinse water temperature of a heat sanitising warewashing machine should be at least 180F (82C). This is based on the FDA Food Code's criteria.
Water used to rinse or clean items like dishes or clothing is referred to as rinse water. To get rid of any last bits of dirt, soap, or other cleaning agents from the item being cleaned, it is frequently used as the last step in a cleaning procedure. Depending on the item being cleaned and the cleaning product being used, the rinse water might be either cold or warm. Rinse water can occasionally be recycled, such as when washing many loads of dishes or clothing, but it must still be sufficiently clean to be effective. It's crucial to properly dispose of wasted rinse water to prevent water sources from being contaminated.
Learn more about Rinse here:
https://brainly.com/question/6677548
#SPJ11
Question 29
Lakes having characteristics of being clean, high in DO, deep and receiving few nutrients:
a. Oligotrophic
b. Mesotrophic
c. Euphoric
d. Eutrophic
The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes.
The lakes having characteristics of being clean, high in DO, deep and receiving few nutrients are typically classified as "oligotrophic" lakes. Oligotrophic lakes are generally low in nutrients and productivity, resulting in clear water, high oxygen levels, and limited biological productivity.
These lakes are often deep and have a low rate of nutrient input, usually from sources such as rainfall or groundwater. The opposite of oligotrophic lakes is eutrophic lakes, which are high in nutrients and productivity, resulting in murky water, low oxygen levels, and high biological productivity.
Visit to know more about Oligotrophic:-
brainly.com/question/5552139
#SPJ11
Select all the options that correctly describe the electron configuration 1s^2 2s^2 2p^4
Option(A) and option(B) are the options that are correctly describe the electronic configuration 1s²2s²2p⁴, that is oxygen and N⁻ atoms.
In a modern periodic table which is organized by increasing atomic number. The atomic number is refer as the number of electrons present in the ground state of atom. Thus, the electronic configuration can be used to identify the atoms or ions. The electronic configuration is used to describe the distribution of electrons in different energy level around the nucleus. We have an electronic configuration is written as 1s²2s²2p⁴.
The atomic number of oxygen(O) atom is 8, and contains 8 electrons. So, electron configuration of oxygen atom is 1s²2s²2p⁴. The atomic number of Nitrogen(N) is 7, and contains 7 electrons. So, electron configuration of Nitrogen atom is 1s²2s²2p³. But for N⁻ the electronic configuration is addition of one electron in electronic configuration of N. That is 1s²2s²2p⁴. The electronic configuration of O²⁻ is written by 1s²2s²2p⁶.Hence, required answer are option(A) and (B).
For more information about electronic configuration, visit:
https://brainly.com/question/21977349
#SPJ4
Complete question:
Select all the options that correctly describe the electron configuration 1s^2 2s^2 2p^4
A) Oxygen
B) [tex]N^{ -}[/tex]
C) [tex]O^{2 -}[/tex]
how many moles of H2SO4 need to react with 10.0 mol of iron (III) hydroxide
Answer:
30.0 moles of H2SO4 are needed to react with 10.0 moles of Fe(OH)3.
Explanation:
The balanced chemical equation for the reaction between H2SO4 and Fe(OH)3 is: Fe(OH)3 + 3H2SO4 → Fe2(SO4)3 + 3H2O According to the equation, 1 mole of Fe(OH)3 reacts with 3 moles of H2SO4. Therefore, to determine how many moles of H2SO4 are needed to react with 10.0 mol of Fe(OH)3, we need to use the mole ratio between Fe(OH)3 and H2SO4: 10.0 mol Fe(OH)3 x (3 mol H2SO4 / 1 mol Fe(OH)3) = 30.0 mol H2SO4.
Therefore, 30.0 moles of H2SO4 are needed to react with 10.0 moles of Fe(OH)3.
suppose you are collecting a gas over water at 23 oc and obtain a pressure reading of 797.6 mm hg. if the vapor pressure of water is 21.1 mm hg at the collection temperature, what is the pressure of the collected gas?
The vapour pressure of water is 21.1 mm hg at the collection temperature,776.5 mmHg is the pressure of the collected gas.
A liquid's vapour pressure drops as the temperature drops.The link between vapour pressure and temperature is described by the Clausius-Clapeyron equation. The vapour pressure of a substance is exactly proportional to the temperature and this relationship is linear, according to the Clausius-Clapeyron equation.
To find the pressure of the collected gas, we need to subtract the vapor pressure of water at the collection temperature from the total pressure reading.
Total pressure reading = 797.6 mmHg
Vapor pressure of water at 23°C = 21.1 mmHg
Pressure of collected gas = Total pressure reading - Vapor pressure of water
Pressure of collected gas = 797.6 mmHg - 21.1 mmHg
Pressure of collected gas = 776.5 mmHg
Therefore, the pressure of the collected gas is 776.5 mmHg.
The boiling point rises as the chain length does, and the relationship between boiling point and vapour pressure is opposite.
Learn more about vapour pressure here
https://brainly.com/question/2510654
#SPJ11
The complete conversion of three moles of glucose by aerobic fermentation yields how many moles of acetic acid? A. 1. B. 2. C. 3. D. 6.
The complete conversion of three moles of glucose by aerobic fermentation yields 6 moles of acetic acid.
Generally, aerobic fermentation or aerobic glycolysis is defined as a metabolic process by which cells metabolize sugars via the process of fermentation in the presence of oxygen and occurs through the repression of normal respiratory metabolism. This method is referred to as the Crabtree effect in yeast and also it is a part of the Warburg effect in tumor cells.
Generally, Reaction 1 of aerobic fermentation shows that 1 mole of glucose is converted to 2 moles of ethanol. And those 2 moles of ethanol are then converted in the Reaction 2 of aerobic fermentation into 2 moles of acetic acid. Hence, the complete conversion of glucose yields two acetic acid molecules per glucose molecule. Also, given that the ratio, when completely converted, three moles of glucose will yield six moles of acetic acid.
Learn more about aerobic fermentation from the link given below.
https://brainly.com/question/3928558
#SPJ4
Explain, in terms of the reaction rates, why the concentrations of the reactants and products remain constant in this system.
Explanation:
In a chemical reaction, the rates at which reactants are converted into products depend on various factors, including temperature, pressure, and concentration of the reactants. When the concentrations of reactants and products remain constant in a system, it typically indicates that the forward and reverse reaction rates are equal, resulting in a state of chemical equilibrium.
At equilibrium, the concentrations of reactants and products do not change over time, because the rates of the forward and reverse reactions are balanced. This occurs when the rate of the forward reaction, which converts reactants into products, is equal to the rate of the reverse reaction, which converts products back into reactants. As a result, the concentrations of both reactants and products remain constant.
The concept of Le Chatelier's principle can help explain why concentrations of reactants and products remain constant at equilibrium. According to Le Chatelier's principle, when a system at equilibrium is subjected to a change in temperature, pressure, or concentration, the system will adjust in a way that opposes the change. For example, if the concentration of a reactant is increased, the system will shift towards the side with fewer moles of reactant in order to restore the equilibrium. Similarly, if the concentration of a product is increased, the system will shift towards the side with fewer moles of product.
As a result of these shifts, the rates of the forward and reverse reactions will be adjusted to restore equilibrium, and the concentrations of reactants and products will remain constant. If the concentration of a reactant or product decreases, the system will shift in the opposite direction to restore equilibrium. This dynamic balancing of the forward and reverse reaction rates is what allows the concentrations of reactants and products to remain constant at equilibrium in a closed system.
any reaction that release 265 kcal of energy can be classified as . group of answer choices exothermic endothermic reduction activated oxidation
Any reaction that releases 265 kcal of energy can be classified as exothermic, which means that it releases energy in the form of heat.
This release of energy is typically the result of an oxidation reaction, where a substance loses electrons and becomes oxidized, while another substance gains electrons and becomes reduced. The process of oxidation can be a major source of energy in biological systems, such as during cellular respiration, where glucose is oxidized to release energy that is used by cells to carry out various functions.
A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. This is because exothermic reactions involve the release of energy, whereas endothermic reactions absorb energy. Oxidation and reduction are related to the transfer of electrons, and activation refers to the energy required for a reaction to proceed.
To know more about reduction click here
brainly.com/question/30281969
#SPJ11
Any reaction that releases 265 kcal of energy can be classified as an exothermic reaction. Exothermic reactions release energy in the form of heat, light or sound, while endothermic reactions absorb energy from the surroundings.
A reaction that releases 265 kcal of energy can be classified as an exothermic reaction. In an exothermic reaction, energy is released in the form of heat, resulting in a net decrease in the system's total energy.
Reduction and oxidation are chemical processes that involve the transfer of electrons between molecules, but they do not necessarily involve the release or absorption of energy. Activation energy is the energy required to start a chemical reaction, but it does not determine whether a reaction is exothermic or endothermic.
To know more about Exothermic reactions :
https://brainly.com/question/28546817
#SPJ11