What does an increase of 1 pH number represent?​

The question is incomplete, the complete question is;

Theresa creates an experiment where she mixes two red-colored substances together in a container and observes the solution slowly changing from red to blue for the next eight minutes. The solution becomes completely blue after eight minutes. What does this represent about the type of change happening in the container? A chemical change started immediately and finished at eight minutes. A non-chemical change started immediately and finished at eight minutes. A chemical change occurred at four minutes. A non-chemical change occurred at four minutes.

Answer:

A chemical change started immediately and finished at eight minutes.

Explanation:

A chemical change is one in which a new substance is formed. One of the indicators that a chemical change has occurred is the change in the color of the system from red to blue.

The question clearly stated that the change occurred gradually. This means that the reaction must have started immediately the substances were mixed and went on to conclusion after eight minutes when the complete blue color appears.

Answer:

P₂ = 1.37

Explanation:

Given data:

Initial pressure = 1.15 atm

Initial temperature = 23°C (23+273= 296 K)

Final pressure = ?

Final temperature = 79°C (79+273=352 K)

Solution:

According to Gay-Lussac Law,

The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.

Mathematical relationship:

P₁/T₁ = P₂/T₂

Now we will put the values in formula:

1.15 atm / 296 K = P₂/352 K

P₂ = 1.15 atm × 352 K / 296 K

P₂ = 404.8 atm. K /296 K

P₂ = 1.37 atm

Answer:

For CH3Br, there are a total of 14 valence electrons. Hydrogen always goes on the outside, and since Carbon is less electronegative than Bromine, we'll put the Carbon in the center and the Bromine on top. We have 14 valence electrons for the CH3Br Lewis structure. Put two between atoms to form chemical bonds.

Explanation:

Answer:

Ag > Fe > Al

Explanation:

The values of the specific heat capacity of the elements are given as;

Aluminum = 0.897 J/g*K  

Iron=0.449 J/g*K  

Silver=0.235 J/g*K

Specific heat capacity basically refers to how much heat is required to change the temperature of a unit mass of a substance by a degree. Elements with high specific heat capacity would require higher energy compared to elements with lower values,

Aluminium (Al) has the highest specific heat capacity, hence it wold require more energy to cause a change in temperature. Aluminium would be the lowest.

Silver (Ag) has the lowest specific heat capacity hence it would require less energy to cause a change in temperature. Silver wold be the highest.

The middle would be iron (Fe).

The rank is given as;

Ag > Fe > Al

Answer:

D

Explanation: When you chill a substance when it is mixed with another substance, ( chilled vinegar mixed with sodium bicarbonate will react slower for instance) it reacts slower do to the molecules slowing down when chilled.

[tex]\huge\boxed{Option D}[/tex]

a liquid mixture in which the the solute which is in a smaller proportion is uniformly distributed within the the solvent which is the major component is called a solution.

It increases the rate of reaction,  because when we stir the solute in the solution, the mixed solute particles are distributed more further than when they are left stationary, making the environment (which surrounds the solute) less concentrated by the dissolved solute thus the rate increases and more solute is mixed.

No, A reacting substances  in water are those which can react with water that are Ionic metal. Water is made of ions [tex]H^+ and OH^-[/tex]. Substances(solute), they mix or dissolve more because Solutes ions interact with the ions of a water(solvent), thus breaking the bonds between the solute and then ions of solute form bond with the ions of water. Thus the rate increases in water.

No, because by the increase in temperature, the kinetic energy of more  molecules of a substance increase which results in reaching the threshold energy(minimum energy required by the molecules to change into product) of more molecules. So less molecules are left with low energy.

Yes, the rate of reaction decreases because  the molecules are slower and collide less. Less molecules make the effective collisions due to which the kinetic energy of molecules is less, so less molecules make up to the threshold energy. So decrease in temperature lowers the rate of the reaction.

Answer:

the pressure increases

Answer:

the answer is B proteins

Explanation:

brainliest pls

Answer:

B. protein

Explanation:

A polymer is defined as a molecule which has 'n' number of monomer units.

Similarly proteins are also polymers as they are made up of amino acids and contain a number of repeated units just like polymers.

Answer:

True

Explanation:

The speed that electromagnetic waves will travel within any medium is the same as those without a medium. The speed of electromagnetic wave is a constant and does not depend on the material of the medium.

Answer:

The correct option is "Element 2 has very similar chemical properties as Element 4"

Explanation:

Both element 2 and element 4 have the same number of valence electrons; meaning they will be found in the same group (group 1) of the periodic table. Elements in the same group of the periodic table exhibit similar chemical properties. For confirmation, element 2 is sodium (based on the atomic number of 11 provided) while element 4 is rubidium (based on the atomic number of 37 provided) - the two elements are found in group 1 of the periodic table.

NOTE: Number of protons is the same as atomic number

Answer:

ν ≈ 4.7 × 10¹⁴ Hz

General Formulas and Concepts:

Chem

Speed of Light = Wavelength times Frequency

Explanation:

Step 1: Define

λ = 6.4 × 10⁻⁷ m

Step 2: Solve for ν

3.0 × 10⁸ = 6.4 × 10⁻⁷ · ν

ν = 4.6875 × 10¹⁴ Hz

Step 3: Check

We are given 2 sig figs. Follow sig fig rules.

4.6875 × 10¹⁴ Hz ≈ 4.7 × 10¹⁴ Hz

Answer:

element is the smallest particles which cannot be broken down.

Answer: solvent

solvent is  A solvent is usually a liquid

Answer: Solvent

Explanation: Everything that dissolves in water and the things which dissolve are called solutes and the liquid in which they dissolve in is called a solvent to form a solution.

Orange juice is mixture.

Answer:

[tex]\boxed {\boxed {\sf Mixture}}[/tex]

Explanation:

An element is pure and all the atoms have the same atomic number. An element has a symbol and can be found on Periodic Table of Elements.

A mixture is created when two or more substances are combined physically.

Orange juice can't be found on the Periodic Table of Elements. Orange juice is made up of many different substances/ingredients, like water, sugar, and juice from the orange.

Therefore, orange juice is considered to be a mixture. More specifically, a homogenous mixture because it is uniform. (*applies to pulp-free orange juice). If it has pulp, it would be a heterogenous mixture.

The volume = 6.71 L

Charles's Law  

When the gas pressure is kept constant, the gas volume is proportional to the temperature  

[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]

V₁=7 L

T₁=25 °C(room temperature) + 273 = 298 K

T₂=12.5(halved) + 273 = 285.5 K

[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\\dfrac{7}{298}=\dfrac{V_2}{285.5}\\\\V_2=6.71~L[/tex]

Answer:

The volume of displaced fluid is equivalent to the volume of an object fully immersed in a fluid.

Co2

Explanation:

CH4 (g) + 2 O2 (g) → CO2 (g) + 2 H2O (l)

Answer:

C - CO

Explanation:

Correct on EDGE

Answer: Option C.

The evaporation of water out of the stomata of plants

Explanation:

The evaporation of water out of the stomata of plants is transpiration because transpiration is the evaporation or loss of water inform of vapor from the stomata of leaves or flowers. Water is first absorbed by the root and it is moved to plant parts including leaves by xylem vessels since the roots already retained which it can use and when the water get to the leaves, it is loss inform of water vapor.

Answer:

it is 395/9 =43.8888889

Answer

involving electrical charges: electrical

involving energy stored in chemical

bonds: thermal

involving the position and motion of

an object: mechanical

involving the motion of atoms: chemical

Explanation:

almost 100 this is right, sorry if this is wrong :)

Answer:

First answer is correct, please let me know if you need any help though!

Answer:

pls pls pls pls pls give me brainliest i just need one more plssssssss

Explanation:

Answer:

1/2

Explanation:

According to this question, the gene coding for fur color in rabbits contains two alleles viz: alelle for brown fur ( B) is dominant, while the allele for black fur ( b) is recessive. This means that an heterozygous rabbit (Bb) will have brown fur.

Based on the question, one rabbit has the dominant allele for brown fur and the recessive allele for black fur i.e genotype Bb, another rabbit has two recessive alleles i.e. genotype bb. If these two rabbits cross i.e. Bb × bb, the proportion of the offsprings produces will have Bb, Bb, bb and bb genotype.

Bb is dominant, hence, 1/2 of the offsprings will be brown furred.

one species of rabbit, . the two rabbits have offspring, what are the

Answer:

38 g?

Explanation:

I'm not entirely sure, but perhaps it is 49 grams x 78.25%? This gives you an answer of 38 g using significant figures.

Answer:

Gravitational potential energy may be converted to other forms of energy, such as kinetic energy. If we release the mass, gravitational force will do an amount of work equal to mgh on it, thereby increasing its kinetic energy by that same amount (by the work-energy theorem).

Explanation:

Answer: In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products. If we count the number of hydrogen atoms in the reactants and products, we find two hydrogen atoms.