What do you find most difficult about developing a research topic? What strategies are you most likely to use now that you have information about how to develop a quality topic? << Read Less

Answers

Answer 1

The most difficult issue about developing a research topic can be to raise the right questions, while strategies to use when we already have information about how to develop a quality topic is to develop suitable experiments and or observational procedures.

What is the scientific method?

The scientific method is a series of well organized steps used to collect scientific information, which is first based on observation of the real words that can be used to raise questions in order to understand such observations.

Subsequently, the scientific method requires raising explanations or hypotheses which may be tested (either confirmed or rejected) by experiments and or observational procedures.

Therefore, with this data, we can see that the scientific method is based on asking the right questions, which then leads us to develop experimental procedures or also observations in order to test the working hypothesis.

Learn more about the scientific method here:

https://brainly.com/question/17216882

#SPJ1


Related Questions

The magnetic domains of an unmagnetised object are found___________A.) Parallel to each otherB.) Perpendicular to each otherC.) Pointing towards southD.) Pointing in different direction

Answers

All of the magnetic domains in an unmagnetized item, such as the original piece of metal in our experiment below, point in different directions.

When a metal gets magnetized, as when it is rubbed with a strong magnet, all like magnetic poles line up and point in the same direction. Atoms in ferromagnetic materials form formations known as domains. A domain is an internal region of a material in which groups of magnetic moments spontaneously align in the same direction. When the external field is withdrawn, the domain walls are pinned in their new orientation, and the aligned domains generate a magnetic field. This is what happens when a ferromagnetic material is "magnetized" and transformed into a permanent magnet.

Learn more about magnetic here-

https://brainly.com/question/3160109

#SPJ4

an object is thrown into the air and follows the path shown in the diagram above. Neglecting air resistance, which vector best represents the acceleration of the object at point A?

Answers

Answer: 3 (c)

Explanation: The only force acting on the object is the force of gravity, mg, which acts straight downward. Even though the object has horizontal velocity, there is no horizontal force after the object is done being thrown.

How much work is done on a 6.4N box of books that you move horizontally across a 6.1 meter room?​

Answers

Answer:

39.04 J

Explanation:

Definition of work

[tex]W=fd[/tex]

[tex]W=[/tex] Work

[tex]f=[/tex] force

[tex]d=[/tex] displacement

In this case,

[tex]f=6.4[/tex]

[tex]d=6.1[/tex]

[tex]W=6.4*6.1[/tex]

[tex]W=39.04[/tex]

A submarine is in water of density 1.0x 10 kg/m³. The submarine changes its depth. This causes
the pressure on it to change by 0.10 MPa.
What is the change in depth of the submarine?
A 0.10m
C 100m
B 10m
D 1000 m

Answers

Answer:

1000m

Explanation:

Pressure = p x g x h

0.1 x 10^6 = 10 x 10 x h

(0.1 x 10^6) / 100

h = 1000m

I hope my answer helps you.

In an experiment, a student measured the volume of a substance while the mass was changed. The student measured up to five kilograms. The graph of the data is plotted below.

A volume versus mass graph is shown with mass on the vertical axes from 1 to 10 kilograms and volume on the horizontal axis from 1 to 5 milliliters. A line from the origin through all points and beyond.

Which of the following is an error the student made in creating an accurate graph?

The axes and graph are based only on measured values.
The axes are labeled with the incorrect variables.
The plotted points do not show all data collected.
The title has the incorrect order for the variables.

Answers

Answer:

let the first point be a second be b third be c fourth be d and last point be e.

The point a and d are incorrect. because tye plotting of the is incorrect

What method do you use to purify water contaminated with salt and microorganisms

Answers

The water purification procedure, such as filtration, sedimentation, distillation, etc.

Which method of purification disinfect water from microorganisms?

Analysis of the reduction in microbes that is enough to protect against the transmission of pathogens in water is debated below. Chlorination is the most widely used method for disinfecting water supplies in the United States.

The most efficient way to desalinize salt water is by using a method called distillation. This is where you boil the water and then assemble the condensation. The steam will provide fresh salt-less water for you to drink.

So we can conclude that Chlorination is the activity of adding chlorine to drinking water to kill parasites bacteria and viruses.

Learn more about water here: https://brainly.com/question/1313076

#SPJ1

a spring with a spring constant of 49 n/m has a 7.2 kg mass hanging from the bottom of it how fast is the mass moving when it passes the equilibrium point

Answers

Answer:

ω = (K / M)^1/2   fundamental frequency for Simple Harmonic Motion

ω = (49 kg-m / (sec^2 - m) * 7.2 kg)^1/2 =  2.61 /sec

F = -K A    Hooke's Law and spring constant

A = 7.2 kg * 9.80 m/s^2 / 49 n/m = 1.44 m       amplitude

V =  ω A = 2.61 / sec * 1.44 m = 3.6 m/s        maximum speed

A block with mass M slides down an incline of angle θ at constant velocity v.
Which of the following expressions is equal to the magnitude of frictional force between the block and the incline? (Note: The acceleration of gravity g = 10 m/s2.)
A.M∙g∙sin θ
B.M∙g∙cos θ
C.M∙g / sin θ
D.M∙g / cos θ

Answers

Mgsin, As a result, at a state of dynamic equilibrium, the frictional force exerted on a mass sliding down an incline is proportional to the object's weight times the sine of the incline angle.

What are velocity and speed?

In contrast to velocity, which describes the speed and direction of such an object's movement, speed is the speed of moves along a path. Alternatively, velocity is a vector while speed is a scalar quantity.

Is speed also known as velocity?

A motion or activity has velocity when it moves quickly. Another term for speed is celerity, which is also a synonym. The measurement of an object's rate and direction of positional change is known as its velocity in physics.

To know more about Velocity visit:

https://brainly.com/question/18084516

#SPJ4

Write the equation for the velocity component in the x-direction?

Answers

Answer:

The equation for the velocity component in the x-direction is : vx(t) = v(0) Cosθ.

Explanation:

here v(0) is the initial velocity

In this figure, why is the kinetic energy gained by the falling ball equal to the change of potential energy? (Assuming no loss of energy due to friction.)

Answers

Kinetic energy gained by the falling ball is equal to the change of potential energy is because mechanical energy remains conserved ,it only converts from one form to another form.

The mechanical energy stays rationed when just inner powers follow up on the body and no outside powers are in real life. It implies that motor and potential might continue to change all through the excursion. Be that as it may, their total is steady at each point.

The forces are moderate, i.e., they don't rely upon the way of the moving article and are just subject to the beginning and last position. For instance, the gravitational power is moderate in nature, though the opposition presented via air is non-moderate in nature as it relies upon the way.

From the diagram,we can see that object has potential energy =mgh because of height h.When it was dropped from height h potential energy starts decreasing and kinetic energy starts increasing because of velocity attained by the body.Since mechanical energy is conserved,therefore kinetic and potential energy is equal.

To know more about potential energy, visit here:

https://brainly.com/question/9349250

#SPJ4

a 1 kg blob of putty moving at 10 m/s runs into another 1 kg stationary blob, and they stick together. the momentum of the blobs after the collision is

Answers

The momentum of the blobs after the collision of a 1 kg blob of putty moving at 10 m/s with another 1 kg stationary blob will be 5 m/s.

The term "completely inelastic collision" is used to describe every time two masses cling together after colliding. Any inelastic collision will result in the internal energy of the objects being transformed into kinetic energy. Because of this, even though the system's energy is conserved (no outside forces are at action), its internal energy is changing in an unknowable and unpredictable fashion. This implies that the concept of energy conservation in inelastic collisions is absolutely meaningless to us. However, the conserved quantity that we can monitor is momentum.

Initial momentum is expressed as p = m1v1 + m2v2,

where, I denotes vector quantities.

v2 = 0  (because the second blob is at rest).

As a result, p=m1v1, |p|=m1|v1|=1*10= 10 kg*m/s,

The total amount of momentum is conserved in a closed system. The end momentum is 10 kg*m/s and is therefore also directed in the same direction as the beginning momentum.

The combined mass is now M=m1+m2= 1+1 = 2 kg due to the fact that two blobs are now clumped together. As a result, p = mv= 10 =2v; from this, v= 10/2 = 5 m/s, headed in the same direction as the first blob's starting velocity.

To learn more about momentum visit;

https://brainly.com/question/24030570

#SPJ4

9. In the two-factor theory of intelligence, what does the s-factor stand for?
specific ability
spatial ability
special ability
score factor

Answers

He explains two components of intelligence: the "g" factor (general ability) and the "s" factor (specific ability). The "g" factor of a person's general mental tasks, while the "s" factor is solely intellectual skills.

What does the S factor of intelligence mean?

certain g and s abilities. According to Spearman's two-factor theory, intelligence is divided into two categories: general intelligence ("g") and specific ability ("s"). Spearman proposed that the "s" component was particular to a certain feature of intelligence to account for variations in performance on various tasks.

What does biology's S factor mean?

S component Individual factors, or empirically the tiniest subclusters of intercorrelations or common variance, are identified in several intelligence tests (specific). The most recent update was on September 30, 2022. Features of the "S" Factor: It is absorbed and learned from the surroundings. Within a single person, it varies from activity to activity. Each person has a different level of "S" ability.

to know more about intelligence here:

brainly.com/question/15020507

#SPJ1

at a given temperature, the values of rate constants for the forward and reverse reaction are ____ and the ratio of k is equal to the ____ constant for the reaction.

Answers

The ratio of k is equal towards the temperature constant for such reaction constants at a certain temperature, and the values of the rate constants for the forward or reverse reactions are concentrations at that temperature.

What are forward and reverse reactions?

A forward response is a reversible reaction wherein products are created from reactants so it moves from left to right. A reversible reaction that moves from right to left is referred to as a backward reaction since reactants are created from products.

What do you call a reversible reaction?

In some oxidation processes, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D.

To know more about  reversible reaction visit:

https://brainly.com/question/16614705

#SPJ4

The values of the rate constants for the forward or reverse reactions are concentrations at that temperature, and the ratio of k is equal towards the temperature constant for such reaction constants.

Why is a reaction reversible?

A chemical reaction that is reversible occurs when the reactants generate products, which then combine to return the reactants to their original state.

When the rate of the forward reaction and the rate of the reverse reaction are equal, equilibrium is reached. At equilibrium, the concentrations of all the reactants and products are fixed. The amount of reactant to product in a chemical reaction can be compared to derive the equilibrium constant, which is used to predict chemical behavior. The rate constants are fixed at some temperature.

To learn more about equilibrium constant use link below:

https://brainly.com/question/19340344

#SPJ4

Which of the following scenarios involves at least one chemical change happening? (2 points)

Group of answer choices

Before you go swimming, you need to fill up the pool because evaporation has decreased the volume.

During the summer time, you are hired to sand your neighbor's fence and paint it white.

In the fall, one of your chores is to cut up wood and stack it in the basement for your parents.

Your summer job for the year is to pick strawberries. At the end of the day you have to crush the ones turning rotten to make strawberry jam.

Answers

The scenario that involves at least one chemical change happening is your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam. The correct option is D.

What is a chemical change?

When bonds between molecules or atoms are created, disrupted, or both, chemical changes result. This implies that a substance with a particular set of properties—such as melting point, color, flavor, etc.—becomes a substance with a different set of characteristics.

Three essential chemical components are used in the production of jam: Acids, sugar, and pectin.

Therefore, the correct option is D, Your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam.

To learn more about chemical change, refer to the link:

https://brainly.com/question/29923908

#SPJ1

The current theory of the structure of the
Earth, called plate tectonics, tells us that the
continents are in constant motion.
Assume that the North American continent
can be represented by a slab of rock 5500 km
on a side and 34 km deep and that the rock
has an average mass density of 2830 kg/m3
.
The continent is moving at the rate of about
2.4 cm/year

Answers

According to the information given, the continent weighs 2.422 * 10²¹ kg.

Volume is the amount of space a thing occupies, whereas mass is the amount of stuff it contains.

What is the rock's mass?

The following formula is used to calculate the rock's mass:

Volume times Density = Mass

The rock has a density of 2830 kg/m³

Area of side * Depth of rock equals the volume of the rock.

The rock's volume is equal to 5.5 * 10⁶ m x 5.5 * 10⁶ m x 2.83 * 10⁴ m

The rock's volume is  8.56 * 10¹⁷ m³

Rock mass: 8.56 * 10¹⁷ m³ * 2830 kg/m³

The rock weighs 2.422 * 10²¹ kg

To know more about Density , visit:

https://brainly.com/question/3310996

#SPJ1

The figure depicts the motion of a particle moving along an xâaxis with a constant acceleration. The figure's vertical scaling is set by xs =6.0m. What are the magnitude and direction of the particle's acceleration?

Answers

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

What is acceleration?

In mechanics, acceleration is the rate of change of an object's velocity with respect to time. Acceleration is a vector quantity (as long as it has magnitude and direction). The direction of an object's acceleration is given by the direction of the net force acting on that object.

For example, if a vehicle starts from rest (zero velocity in the inertial frame) and moves in a straight line while increasing speed, the vehicle accelerates in the direction of travel. When the vehicle turns, it experiences acceleration in a new direction and changes its motion vector. Acceleration in the vehicle's current direction of travel is called linear (or tangential, in the case of circular motion) acceleration, and the passenger perceives that response as pushing back into the seat.

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

To know more about acceleration visit:

https://brainly.com/question/460763

#SPJ4

What is the range of a projectile?

Answers

The range of a projectile is the horizontal distance the projectile travels from the time it is launched to the time it comes back down to the same height at which it is launched.

Answer:

Explanation:

The horizontal displacement of the projectile is called the range of the projectile. The range of the projectile depends on the object's initial velocity.

While operating around buildings, the remote PIC should be aware of the creation of wind gusts that
answer choices
— change rapidly in direction and speed causing turbulence.
— enhance stability and imagery.
— increase performance of the aircraft.

Answers

The remote PIC should be aware of the wind gust because of a)  the rapid change in direction and speed which causes turbulence.

The wind gust is a sudden short-term increase in wind speed. According to US weather observation practice, a gust is reported when the maximum wind speed reaches at least 16 knots and the difference between the maximum wind speed and the light wind speed reaches at least 9 knots. Wind forces can disrupt a building's load path or pierce the building's skin. Doors and windows can burst in really high winds. In other cases, nearby debris can be caught in the wind and flung into the building's envelope.

Learn more about the wind gust in

https://brainly.com/question/459236

#SPJ4

By definition, if one coulomb of charge passes between two electrodes that differ in potential by one volt, one __________ of energy is released. This relationship is correctly expressed as V = ______/______.

Answers

one of released energy for each coulomb of charge that travels across electrodes with a one volt potential difference. V joule, J/C is the correct way to describe this relationship.

What do the electrodes in your body do?

A tool that transfers electricity from just an instrument to something like a patient for therapy or surgery. Examples include a tiny metal plate or needle. In order to help recorders diagnose certain problems, electrodes can also transport electrical impulses from the heart, brain, muscles, skin, or other physiological regions.

Simply put, what is an electrode?

An electrode is a conductor for electricity that establishes electrical contact with nonmetallic components of a circuit, like an electrolyte, a semiconductor, or a vacuum. This may also go by the names anode or cathode if it is a part of an electrochemical cell.

To know more about electrodes visit:

https://brainly.com/question/17060277

#SPJ4

An ant starts at one edge of a long strip of
paper that is 30.8 cm wide. She travels at
0.6 cm/s at an angle of 40◦ with the long edge.
How long will it take her to get across?
Answer in units of s.

Answers

it take the ant   68.9 seconds to get across  the other edge of a long strip.

How do we calculate for velocity?

If the ant is moving at a constant speed, the velocity vector will have the same magnitude at any point, and can be decomposed in two vectors, along directions perpendicular each other.

So then, if we choose these directions coincident with the long edge of the paper, and the other perpendicular to it, the components of the velocity vector, along these axes, can be calculated as the projections of this vector along these axes.

We only are interested in the component of the velocity across the paper, that can be calculated as follows:

vₓ = v* sin θ, where v is the magnitude of the velocity, and θ the angle that forms v with the long edge.

We know that v= 0.6 cm/s, and θ = 40º, so we can find vₓ as follows:

vₓ = 0.6 cm/s x sin 40 º

Vx = 0.6 cm/s x 0.7451 =  0.447 cm/s

Applying the definition of average velocity, we can solve for t:

time =  30.8 cm/ 0.447

time = 68.9 seconds

Learn more about average velocity at:  https://brainly.com/question/17444459

#SPJ1

PLEASE HELP ME ANSWER THE PHYSICS QUESTIONS ON MY PROFILE!!! i will give brainliest to the first to answer!!! this one and the other ones LAST QUESTION!!!!!!!!!!!!! GET A BRAINLIEST



How far does a plane fly in 18 s while its velocity is changing from 146 m/s to 78 m/s at a uniform rate of acceleration?

Answers

Refer to the photo taken.

For the chain: linear density =ρ, length =l. The chain is placed on the smooth plane. As shown in the figure, the drooping length =b, the chain is stationary at this moment (v=0). Then, under the action of the gravity, the chain drop freely. Determine the speed of the chain when the left end of leave the plane.

Answers

For the chain: linear density =ρ, length =l. The chain is placed on a smooth plane. The speed of the chain when the left end leaves the plane is the same as its initial speed, which is zero.

What is speed?

Generally, To determine the speed of the chain when the left end leaves the plane, we need to consider the forces acting on the chain and use Newton's second law to find the acceleration of the chain.

The forces acting on the chain are the force of gravity and the normal force from the plane. The force of gravity is downward and is equal to the weight of the chain, which is given by the equation:

Fg = mg

where m is the mass of the chain and g is the acceleration due to gravity. The normal force from the plane is upward and is equal to the force of gravity, since the chain is stationary at this moment.

Newton's second law states that the acceleration of an object is equal to the net force acting on it divided by its mass. Therefore, the acceleration of the chain is given by:

a = (Fg - Fn)/m = (mg - mg)/m = 0 m/s^2

Since the acceleration of the chain is zero, the speed of the chain does not change as it drops.

Read more about speed

https://brainly.com/question/28224010

#SPJ1

CQ not found

Please help>>>>
Ibrahim is a 15-year-old boy. He has been suspended for fighting on school property. How would a psychologist who emphasizes the social learning perspective explain this behavior?

A) Ibrahim has been rewarded for previous aggressive behavior.

B) Ibrahim has observed others who model aggressive behavior.

C) Ibrahim is at a stage in development when increases in male hormones predispose him to engage in aggression.

D) Ibrahim has projected his aggressive impulses onto others and anticipates that they will behave aggressively toward him.

Answers

The psychologist who emphasizes the social learning perspective explain this behavior would say that Ibrahim has observed others who model aggressive behavior. Option B

What is meant by aggressive behavior?

According to social psychology, aggression refers to any conduct or action intended to hurt a person, an animal, or cause physical injury to property. Here are a few instances of aggressive behavior: physical harm. screaming, cursing, and foul language.

Aggression is an overt or covert social engagement that is frequently harmful and intended to cause harm to another person.

Aggressive behavior is forceful, reactive, and impulsive behavior that frequently leads to breaching social norms or the law.

Read more on aggression here https://brainly.com/question/1167735

#SPJ1

16. The diagram shows a design for an electrically operated model railway signed. a) Explain, step by step, how it works. b) Explain how, by adding a scale and a spring, you could use it as an ammeter.​

Answers

Answer:

Below

Explanation:

When the switch is closed the circuit is complete....the coil in the circuit will act as a solenoid magnet and draw the iron in thus raising the sign.

an ideal vapor-compression refrigeration cycle operates at steady state with refrigerant 134a as the working fluid. saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar. the mass flow rate of refrigerant is 7 kg/min. determine

Answers

the refrigeration capability, in tons, is 4.905 tons, the coefficient of performance, in kW, is 4.17 KW, and the compressor power, in kW, is 4.1336 KW.

Describe the compressor formula.

Electrical Expense = HP *.746 * hours * Kw cost * motor efficiency. As an illustration, consider a 50 HP compressor that consumes $.06 per Kwh of electricity and has a 90% efficiency electric motor. $5,172.26 is the yearly cost for 50 HP multiplied by.746 over 2,080 hours.

Compressor definition and operation

In order to create energy which can be kept in a tank for later use, air compressors work by applying pressure to atmospheric air. Similar to an open balloon, when the compressed air is purposefully released, pressure builds up, transforming the potential energy into productive kinetic energy.

To know more about compressor visit;

https://brainly.com/question/28963656

#SPJ4

can anyone please help me answer this question the assignment will close in 30 mins please help me quick

Answers

Answer: D. 34.03

Explanation:

To solve this problem, we can use the equation for the conservation of energy, which states that the change in internal energy of a closed system is equal to the heat added to the system. We can express this equation as follows:

2a) A 50 kg sled is pulled across a frictionless surface by a rope with a tension of 30 N at an angle of 30 degrees from the horizontal. Determine the normal force on the sled.

(keep in mind that a portion of the force of tension is in the vertical direction... therefore the normal force will not be the full force of gravity).

2b) Determine the sleds acceleration in the horizontal direction.

PLEASE HELP MEEEEE

Answers

(a) The normal force on the sled is 490 N.

( b ) The sleds acceleration in the horizontal direction is 0.52 m/s².

What is the normal force on the sled?

The normal force on the sled is the upward force on the sled due to weight of the sled acting downwards.

The normal force on the sled is calculated as follows;

N = mg

where;

m is the mass of the sledg is acceleration due to gravity

N = 50 kg x 9.8 m/s²

N = 490 N

The acceleration of the sled is calculated by applying Newton's second law of motion as shown below;

Fx = ma

F cosθ = ma

a = Fcosθ / m

where;

θ is the inclination of the applied force

a = ( 30 N x  cos30 ) / ( 50 )

a = 0.52 m/s²

Thus, the acceleration of the sled is a function of net force and mass of the sled.

Learn more about normal force here: https://brainly.com/question/28788588

#SPJ1

The resistors in the circuit below have the following values: R1 = 7.20 Ω, R2 = 7.00 Ω, and R3 = 4.10 Ω. The two batteries each have a voltage of 4.00 V.

Answers

The total voltage in the circuit is 8 V. Then, the current passing through the resistor R3 is 1.95 A. The power supply to this resistor by the batteries is 15.6 W.

What is Ohm's' law?

According to Ohm's law, the voltage through a closed circuit is the product of the current passing through the circuit and resistance through it.

Hence, V = I R.

Given that the resistance through the resistor R3 = 4.10 Ω

The voltage across each batteries = 4 V

Total voltages =  4 + 4 = 8V

Current = voltage/ resistance

             = 8 V/ 4.10 Ω

             = 1.95 A.

Power through a circuit is the product of current and voltage through it.

P = I V

Power supplied to R3 = 1.95 A × 8 V = 15.6 W.

Therefore, the power supplied by the batteries to the resistor R3  is 15.6 W.

To find more on Ohm's law, refer here:

https://brainly.com/question/1247379

#SPJ1

Suppose that Energizer makes AA batteries that, when placed in an electronic device, have a lifetime that is normally distributed with a mean of 360 minutes and a standard deviation of 25 minutes. (a) What is the 90th percentile of AA battery life? ( 2pts ) (b) If 5 batteries are randomly selected, what is the probability that at least one of the five lasts less than 330 minutes? (3 pts)

Answers

The x is the number of hours. want to determine the probability (P) x >= 13 To convert it to a percentage, multiply it by 100, yielding 84.13%.

Probability is simply the likelihood of something occurring. When we are uncertain about the result of an event, we might discuss the probabilities of several outcomes—how likely they are. Statistics is the study of occurrences guided by probability. If x is N(14,1), it can be transformed to N(0,1) using z = (x - mean) / standard deviation and the probability can be calculated using a conventional normal probability table.

P(x > 13)

= P(z > (13 - 14)/1)

= P(z > -1)

= 1 minus P(z -1)

= 1 minus 0.1587

= 0.8413

To convert it to a percentage, multiply it by 100, yielding 84.13%.

Learn more about conventional here-

https://brainly.com/question/28222820

#SPJ4

A liquid having a mall depth but a large volume is forced by an applied pressure p

Answers

A liquid having mall depth but large volume is forced by an applied pressure P above it to escape with velocity v through a small hole below. The velocity v is given by: v= CPxdy, where C, x and y are dimensionless constants.
Other Questions
What must producers do to generate higher profits? What is Yorick purpose? What is the first prime number? Data analytics is the process of using technology to transformbusiness event data into business process data.data into useful information.accounting data into business data.unreliable data into reliable data.The information quality characteristic where by differ- ent knowledgeable and independent people reach agreement about whether information is representative of a real-world fact or occur- rence is calleda. relevance.b. faithful representation.c. verifiability.d. reliability. How does the speaker's conflicting attitude toward the wall develop over the course of the poem? express the following decimal numbers in binary, octal, and hexadecimal forms: a. 173; b. 299.5; c. 735.75 Solve the equation22 = -13 + a you are going to receive $25,000 in 10 years. you can earn interest at a 12% rate (this is your discount rate). what is the value today (present value) of this payment? g What was the state of Georgia's economy at the end of the Civil War?OA. Jobs were easy to find.B. The economy was devastated.C. The economy sprang back almost immediately.D. There was a resurgence of the textile industry.SUBMITS FILL IN THE BLANK. in addition, you should code and show how the client process waits for a signal sigint using sigsuspend(____) in the beginning of the client program. remember that you can generate sigint by pressing ctrl-c. this signal waiting part is 5pt and will be in the beginning of the client program. after that, the client will interact with the server as described above. Identify four ways Americans' political ideologies are shaped both authors would most likely suggest that the historical situation described in the excerpts contributed to which of the following? What are the six main reasons for Swift's proposal? During a disagreement the team leader kept looking at her watch.How did this cross the Line of Respect?Select the best answer,Then, click SubmitToneBody languageWordsIt did not cross the line of respect,it is OK to check the time. What is f(2) for the function f(x)=6x+8? kanye west pulled out of which big music festival in april, two weeks before he was scheduled to appear? What is Japanese poetry style called? Is a square root always an irrational number? What impact did the Ottoman Empire have on Eastern Europe? Anna has 7,209 cans of soup that need to be boxed. If she puts 9 cans of soup in 1 box, how many boxes will she need.