What color light can you add to cyan light to make green?

The ancient Greek astronomer Aristarchus of Samos was the first person to suggest that the Earth orbited the sun, around 250 BCE.

Aristarchus of Samos was an ancient Greek astronomer and mathematician who lived from 310 BCE to 230 BCE. He was the first person to suggest that the Earth orbited the sun, rather than the other way around, as was commonly believed at the time. Aristarchus made this suggestion based on observations of the positions of the stars and planets, and his belief that the sun was much larger than the Earth, which made it more plausible that the Earth would orbit the sun rather than the other way around. Despite his groundbreaking theory, it was not widely accepted until much later, with the work of Nicolaus Copernicus in the 16th century.

Learn more about Greek astronomer here:

https://brainly.com/question/30283982

#SPJ11

The statement, "Standard sized circuit breakers and fuses include 25, 90, and 350 ampere" is true

The statement, "Standard sized circuit breakers and fuses include 25, 90, and 350 ampere" is true. Standard breakers come in various sizes to protect electrical circuits from damage due to excessive current. Common sizes include 25, 90, and 350 ampere, among others. These breakers help to maintain the safe operation of electrical systems.

Learn more about circuit breakers

brainly.com/question/30795854

#SPJ11

The impedance of the circuit is A. 5.7 Ω,

In order to find the impedance of a series circuit, you can use the formula Z = √(R² + (XL - XC)²), where Z is the impedance, R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.

Given the values in your question:
R = 4.0 Ω
XC = 21.0 Ω
XL = 17.0 Ω

First, find the difference between the inductive and capacitive reactance:
ΔX = XL - XC = 17.0 Ω - 21.0 Ω = -4.0 Ω

Now, substitute these values into the formula:
Z = √(R² + ΔX²) = √((4.0 Ω)² + (-4.0 Ω)²) = √(16 Ω² + 16 Ω²) = √(32 Ω²)

Z = 5.66 Ω (rounded to 5.7 Ω)

Therefore, the impedance of the circuit is A. 5.7 Ω.

The Question was Incomplete, Find the full content below :

A series circuit has a resistance of 4.0 Ω, a reactance (due to the capacitance) of 21.0 Ω, and a reactance (due to the inductance) of 17.0 Ω. Find the impedance of the circuit.

A) 5.7 Ω

B) 27 Ω

C) 8.0 Ω

D) 42 Ω

know more about impedance here:

https://brainly.com/question/31369031

#SPJ11

False, It depends on the definition of a Public Water Supply (PWS) according to the regulatory agency in the particular jurisdiction.

In the United States, for example, the Environmental Protection Agency (EPA) defines a PWS as a system that provides water for human consumption to at least 15 service connections or regularly serves at least 25 individuals. Therefore, if the apartment building with three apartments and six residents has its own well or water treatment system and is not connected to any other system, it may not be considered a PWS. However, if it is connected to a larger system and provides water for other customers besides the apartment building, it would likely be classified as a PWS.

Learn more about Public Water Supply

https://brainly.com/question/29034281

#SPJ4

When light travels through a medium, it can take different paths that have different distances and speeds.

However, if the medium has a symmetrical structure, such as a cylindrical shape, the light can follow a path along the center, which is the shortest distance between two points. Although the speed of light along this path is reduced, the overall travel time is also reduced because the distance is shorter.

As a result, the difference in travel times between the different paths is reduced, leading to a more consistent and predictable travel time for the light.

This principle is often used in fiber optic communication systems, where light travels through long, cylindrical fibers to transmit data over long distances with minimal loss of signal strength. When light travels along the center of a medium, it moves a shorter distance compared to light traveling along the edges.

However, this central path may have a reduced speed due to factors like refraction or the properties of the medium. This reduced speed can compensate for the shorter distance, ultimately leading to similar travel times for both central and edge paths. As a result, the difference in travel times between these two paths is reduced.

To learn more about fiber optic click here

brainly.com/question/3902191

#SPJ11

The total intensity engulfing of sound produce by Music have loudness is 91.0 db is approximately 91.2 dB.

To find the total sound intensity, you need to combine the intensity levels of the music (91.0 dB) and the baby yelling (86.0 dB).

1. Convert the decibel levels to intensity values using the formula: I = 10^(dB/10), where I is the intensity and dB is the decibel level.

For the music:

[tex]I_{(music)} = 10^{(91.0/10)} = 10^{9}[/tex]

1 For the baby:[tex]I_{baby} = 10^{(86.0/10)} = 10^{8.62}[/tex]

Add the intensities together to get the total intensity:

[tex]I_{(total)} = I_{(music)} + I_{(baby)}[/tex]3. Convert the total intensity back to decibels using the formula:

[tex]dB = 10 * log10(I) dB_{total }[/tex]

[tex]= 10 * log10(I_{total})[/tex]

Following these

steps:1.[tex]I_{music} = 10^{9.1} = 1,258,925 I_{baby} = 10^{8.6} = 398,1072.[/tex]

[tex]I_{(total)} = 1,258,925 + 398,107 = 1,657,0323.[/tex]

[tex]dB_{total} = 10 * log10(1,657,032) =91.2 dB[/tex]

So, the total sound intensity engulfing you is approximately 91.2 dB.

To know more about intensity Visit:

https://brainly.com/question/17583145

#SPJ11

Adjusting the frequency to 100% will cause the bulb to always be on because the high frequency will not allow the bulb to turn off.

As for the average brightness of the light bulb with the electromagnet to the left of the pickup coil, it depends on the number of loops of the pickup coil. The more loops there are, the higher the brightness will be because there is more electromagnetic energy being transferred to the coil, which in turn produces a stronger magnetic field that powers the bulb. So, increasing the number of loops in the Pickup Coil properties box will result in a brighter light bulb. The average brightness of the light bulb will depend on the number of loops of the pickup coil in that the more loops there are, the greater the output of the coil.

To learn more about frequency click here https://brainly.com/question/22548127

#SPJ11

The work done against friction is-100 J

The work done against friction is equal to the difference between the work done by the applied force and the increase in potential energy:

Work done by applied force = force x distance x cos(theta)

where theta = angle between the incline and the horizontal plane.

W = 50 N x 8 m x cos(θ)

The increase in potential energy is given as 300 J.

The work done against friction is given by:

W = ΔE - Wp

where ΔE = change in potential energy and Wp = work done by the person (50 N force over 8 meters).

W = 300 J - (50 N × 8 m)

W = 300 J - 400 J

W = -100 J

The work done against friction is negative, indicating that the force of friction is acting in the opposite direction of motion.

Find out more on work done here: https://brainly.com/question/8119756

#SPJ1

The answer is c. intensity. The intensity of a sound wave is the energy transferred per unit of time (sec) through a unit area normal to the direction of propagation.

This means that the energy of the sound wave is spread out over an area and the amount of energy that is transferred depends on the intensity of the sound wave. The direction of propagation refers to the direction in which the sound wave is traveling.

The intensity of a sound wave is the energy transferred per unit of time (sec) through a unit area normal to the direction of propagation.

Learn more about the sound waves here:brainly.com/question/21995826

#SPJ11

When an outlet from an Underfloor raceway is discontinued, the circuit conductors supplying the outlet must be disconnected, isolated, and insulated from any possible contact with other conductors. This ensures safety and prevents potential short circuits or other electrical hazards. The underfloor raceway is a system used in commercial buildings to distribute electrical power and data cabling underneath the raised floor. It typically consists of metal or plastic conduit channels installed below the floor surface, providing a concealed pathway for routing electrical conductors.

The circuit conductors supplying power to that outlet are disconnected and terminated properly. This may involve removing the outlet box, disconnecting the conductors from the circuit breaker or fuse panel, and properly capping or terminating the conductors to ensure they are safely and securely isolated from the electrical system. Following local electrical codes and best practices is essential to ensure the safe and efficient operation of the electrical system.

learn more about Underfloor Raceway here:

https://brainly.com/question/29934734

#SPJ11

If electrons are moving in a magnetic field, their direction depends on the orientation of the magnetic field and the charge of the electron. The direction can be determined using the right-hand rule.  For electrons, which have a negative charge, you should use the left-hand rule instead.

If the electrons are moving parallel to the magnetic field, there will be no force exerted on them, since the angle between their velocity vector and the magnetic field vector is zero. Therefore, the direction of the electrons will not be affected by the magnetic field.

If the electrons are moving antiparallel to the magnetic field, the force exerted on them will be in the opposite direction to the force exerted on electrons moving parallel to the magnetic field. Therefore, the direction of the electrons will be affected by the magnetic field, and will be opposite to the direction predicted by the right-hand rule.

If the magnetic field is oriented perpendicular to the direction of the current flow, the force exerted on the electrons will be perpendicular to both the current flow and the magnetic field. In this case, the direction of the force and the resulting electron flow can be determined using the right-hand rule.

Learn more about right-hand rule here:

https://brainly.com/question/9750730

#SPJ11

If the electrons are moving parallel to the magnetic field, then they will not experience any force due to the magnetic field.

This is because the magnetic field only exerts a force on moving charged particles that are perpendicular to the direction of the magnetic field lines.

If the electrons are moving perpendicular to the magnetic field, then they will experience a force due to the interaction between their electric charge and the magnetic field. This force is known as the Lorentz force and is given by the equation:

F = q(v x B)

where F is the force, q is the electric charge of the particle, v is the velocity of the particle, and B is the magnetic field vector.

In this case, the electrons will move in a circular path around the magnetic field lines, with the direction of the circular motion depending on the direction of the magnetic field and the charge of the electron.

To determine the direction of the circular motion, we use the right-hand rule.

The right-hand rule states that if you point your right thumb in the direction of the velocity vector (v) and your fingers in the direction of the magnetic field vector (B), then your palm will face in the direction of the force vector (F).

So, if the magnetic field is pointing upwards and the electrons are moving towards you, then the direction of the circular motion would be clockwise.

If the electrons are moving away from you, the direction of the circular motion would be counterclockwise.

If the magnetic field is pointing downwards, the direction of the circular motion would be reversed.

In summary, if the electrons are moving parallel to the magnetic field, they will not experience any force due to the magnetic field.

if they are moving perpendicular to the magnetic field, they will move in a circular path around the magnetic field lines, with the direction of the circular motion depending on the direction of the magnetic field and the charge of the electron.

To know more about Lorentz force :

https://brainly.com/question/15552911

#SPJ11

The frequency heard by the observer is lower than the source.

When a sound source departs from a stationary observer, the sound waves are stretched out or compressed depending on the relative motion of the observer and the source. This effect is known as the Doppler effect.

If the sound source is moving away from the observer, the distance between successive wave crests (or troughs) is increased, resulting in a longer wavelength. Since the speed of sound in air is constant, the frequency of the sound wave must decrease to compensate for the longer wavelength. This means that the frequency heard by the observer will be lower than the source.

In conclusion, if a sound source departs from a stationary observer, the frequency heard by the observer will be lower than the source due to the Doppler effect.

To know more about frequency, visit;

https://brainly.com/question/254161

#SPJ11

the total amount of thermal energy required 389232 J.

calculate the amount of thermal energy required to raise the temperature of the water to boiling point:

Q1 = m * c * ΔT

where m is the mass of water, c is the specific heat of water, and ΔT is the temperature change needed.

Here, m = 0.15 kg, c = 4186 J/(kg·K), and ΔT = 100°C - 20°C = 80°C.

Q1 = 0.15 kg * 4186 J/(kg·K) * 80°C

Q1 = 50232 J

Therefore, 50 kJ of thermal energy is required to boil the water after it reaches the boiling point.

Now we can calculate the total amount of thermal energy required to boil the water:

Q2 = m * L

where L is the latent heat of vaporization of water.

Q2 = 0.15 kg * 2260 kJ/kg

Q2 = 339 kJ

Adding Q1 and Q2, we get the total amount of thermal energy required:

Q = Q1 + Q2

Q = 50232 J + 339 kJ

Q = 389232 J

Comparing this to the 500 kJ of thermal energy given off by the stove, we see that there is enough energy to boil all the water.

learn more about thermal energy here

https://brainly.com/question/19666326

#SPJ1

Answer:

a) Alpha rays because an alpha ray involves a Helium nucleus - with an atomic number of two and a mass number of 4

Beta rays would be next which involve an electron which is thousands of times less massive than an alpha ray

Answer:

particles will gain more energy

Explanation:

Hope this helps! =D

The movement of charges from one plate to the other in a capacitor is a fundamental process that underlies many electronic devices and applications.

When a capacitor is connected to a circuit, charges begin to flow from one plate to the other until both plates reach the same potential and the capacitor becomes fully charged.

This process involves the movement of electrons, which are negatively charged particles, from one plate to the other.

Initially, the capacitor is uncharged, and the plates have an equal number of positive and negative charges.

When a voltage is applied to the capacitor, electrons begin to flow from the negative plate to the positive plate, creating an electric field between the two plates. This electric field stores energy in the capacitor, which can be released later when the capacitor is discharged.

If the voltage across the capacitor is removed, the capacitor will retain its charge and will discharge slowly over time as the electrons flow back from the negative plate to the positive plate.

This discharge process can be used in various applications, such as in flash photography, where a capacitor is charged rapidly and then discharged quickly to produce a bright flash of light.

For similar question on capacitor

https://brainly.com/question/13578522

#SPJ11

To determine the required THHN conductor size for an air-conditioning unit with a conductor ampacity of 34 amperes and terminals rated at 75 degrees Celsius,

Please follow these steps:
1. Refer to the National Electrical Code (NEC) table 310.15(B)(16) for allowable ampacities of insulated conductors rated up to and including 2000 Volts.
2. Locate the column for the 75-degree Celsius terminal rating, as specified by your equipment and circuit breakers.
3. Find the conductor size that has an ampacity equal to or greater than 34 amperes in the 75-degree Celsius column.
Following these steps, you will find that the appropriate THHN conductor size for your air-conditioning unit is 8 AWG, as it has an allowable ampacity of 50 amperes in the 75-degree Celsius column, which is sufficient for the required 34 amperes.

Visit here to learn more about conductor:

brainly.com/question/8426444

#SPJ11

Phase and grounded conductors sized No. 1 AWG and larger can be connected in parallel, subject to specific requirements.

Segment 310.10(H)(1) of the Public Electrical Code (NEC) licenses stage and grounded (unbiased) conduits that are estimated No. 1 AWG and bigger to be associated in equal.

This implies that guides conveying current in a similar stage or grounded (impartial) guides can be associated together to increment ampacity or for overt repetitiveness.

Notwithstanding, explicit necessities should be met, including that the guides should be of a similar length, have a similar ampacity and protection type, be ended and associated in a similar way, and be associated with a similar stage or shaft. Consistence with NEC rules is important to guarantee protected and dependable activity of the electrical framework.

To learn more about Phase conductors and AWG, refer:

https://brainly.com/question/28744331

#SPJ4

To disinfect a well, one should mix one quart of bleach in five gallons of water and pour it directly into the well.

Disinfecting a well is an important maintenance task to prevent the growth of harmful bacteria, viruses, and other microorganisms in the water supply. Bleach is a commonly used disinfectant for wells because it is effective at killing many types of microorganisms. The recommended concentration of bleach for well disinfection is 50-200 parts per million (ppm), which can be achieved by mixing one quart of household bleach (containing 5-6% sodium hypochlorite) in five gallons of water. This solution should be poured directly into the well and allowed to sit for several hours, typically 12-24 hours, to ensure thorough disinfection.

After the disinfection period, the well should be flushed with clean water until there is no bleach smell or taste. It is important to follow all recommended safety precautions when working with bleach, such as wearing protective gloves and eyewear and avoiding contact with skin or eyes. The well water should be tested after disinfection to ensure that the concentration of disinfectant is within the recommended range and that the water is safe for consumption.

To know more on disinfecting a well

https://brainly.com/question/10587479

#SPJ4

Answer:

Explanation:

p = m * v

where m is the mass of the object and v is its velocity/speed.

In this case, we are given the momentum (p) and the mass (m) of the football. We can rearrange the formula to solve for v:

v = p / m

Substituting the given values, we get:

v = 8 kg * m/s / 0.4 kg

v = 20 m/s

The choke valve is normally found in the upper part of a conventional carburetor, close to the air inlet or throttle plate. In order to assist the engine start and run smoothly in cold temperatures, the choke valve is made to restrict the flow of air into the carburetor.

This raises the fuel-to-air ratio and offers a richer fuel mixture during cold starts. There are various types of carburetors with various designs, so the precise location of the choke valve may vary depending on the design and type of carburetor. However, the choke valve is typically found close to the air intake at the top of the carburetor.

Using a lever or thermostat, it can be controlled manually or automatically, depending on the carburetor design, a bi-metallic mechanism.

To know more about valve

https://brainly.com/question/28538994

#SPJ4

According to NEC Article 330.24, the radius of the inner edge of any bend for a cable with a diameter of over ¾ inch shall not be less than 12 times the diameter of the MI cable.

To determine the appropriate bend radius for this particular cable, we first need to calculate its diameter using the given information in the question. Therefore, 332 - 24(2) = 284, which is the cable's diameter in mils. To convert this to inches, we divide by 1000, so the diameter is 0.284 inches.

Therefore, the minimum bend radius for this cable is 12 x 0.284 = 3.408 inches. This means that any bend in this cable must have a radius of at least 3.408 inches to prevent damage to the cable.

For more such questions on radius, click on:

https://brainly.com/question/29595940

#SPJ11

The correct answer is d. aluminum. Beta radiation consists of high-energy electrons that can be stopped by materials with moderate levels of atomic number and density, such as aluminum.

Lead is a better shield against gamma radiation, while glass and plastic can stop alpha radiation.

An electron current with a kinetic energy between 0.2 MeV and 3.2 MeV that is released at a rate faster than the speed of light is known as beta radiation. Less than 200 ion pairs typically form in each centimetre of air passage due to the fact that interactions between -particles and the atoms of pass-through materials occur much less frequently than interactions between 5×10⁵-particles due to their lower mass, which is approximately 5.5×10₄ amu (9.13010(24)g).

An extremely high energy positron or electron is generated during the beta radioactive disintegration of a nucleus. Beta radiation is another name for this emitted particle.

Learn more about Beta radiation  here

https://brainly.com/question/16645044

#SPJ11

The link margin needed is equal to the difference between the EIRP of the jammer signal and the transmitting terminal EIRP = EIRP(jammer) - EIRP(transmitted).

A wireless link budget, in general, predicts the potential losses that the signal being transmitted might experience and makes adjustments to the design parameters to mitigate the consequences of such losses. EIRP is frequently used to define the transmission power level needed in wireless connection budget estimates.  The power transmitted by an isotropic source is used as the reference by the EIRP. EIRP combines the transmitting antenna's gain and power. EIRP is calculated as the product of the transmitting antenna's power and gain. A comparison is made between the power radiated and gain of an isotropic source and the product of the power radiated and gain of a realizable antenna. A source that is isotropic radiates uniformly in all directions has a gain of one.

The link margin value that must be achieved to force an enemy jammer at equal distance to a receiving link 16 terminal to use 128 times more power than the transmitting terminal is the ratio of the equivalent isotropically radiated powers (EIRP) of the two signals (the transmitted and the jammer signal). 128 =  [tex]\frac{(EIRPjammer) }{(EIRPtransmitted)}[/tex]. Therefore, the link margin needed is equal to the difference between the EIRP of the jammer signal and the transmitting terminal EIRP = EIRP(jammer) - EIRP'(transmitted).

To know more about signals, visit:

https://brainly.com/question/14699772

#SPJ1

The correct answer is d. an organization's nationality is held strongly in consciousness. Globalization is the process of increasing interconnectedness and interdependence among individuals, businesses, and countries worldwide.

It involves the breaking down of national boundaries and creating a borderless world where goods, services, and people can move freely. As a result, there is increased competition between workers from different countries, but the emphasis on an organization's nationality is reduced in the face of globalization.
Globalization implies all of the following except

d. an organization's nationality is held strongly in consciousness

To know more about Organization's click here .

brainly.com/question/13278945

#SPJ11

Most star formation occurs in the spiral arms of the Milky Way Galaxy.

Which are the regions of highest density of interstellar gas and dust. These areas of dense gas and dust are the perfect environment for star formation, due to their higher local density which allows them to gravitationally collapse and form stars. The spiral arms of the Milky Way contain a variety of molecular clouds, which are regions of gas and dust that have the potential to form stars. The Milky Way's spiral arms are also home to a variety of star clusters, which are regions of stars that were born from the same molecular cloud at the same time.

learn more about gravitationally Refer: https://brainly.com/question/30875490

#SPJ11

That hole provides three main roles: 1 for living two for speaking, and a third for swallowing. It fulfils three roles. When he swallows, his lip closes the hole of the palate in the rear his his mouth, settling the fleshly valves in the top part of the throat.

The throat serves as where those pathways of air and nutrients meet. When one breathes in through the nose or word, the air that comes in always goes through the pharynx. As you might expect, swallowing is a vital element of survival; it allows us to eat and drink.

Our breathing tube, our windpipe or the trachea is not separate from what we use to swallow, the stomach. Air, food, and fluids all travel together down the throat till the windpipe splits apart, exactly around the apple of Adam. Normally, the epiglottis prevents food and water from passing down the windpipe.

To know more about rear visit:

https://brainly.com/question/28464224

#SPJ1

Your success as a businessperson is indeed closely connected to your ability to convince others.

In any business, success often depends on the ability to persuade others , whether it's convincing investors to invest in your company, convincing customers to buy your products or services, or convincing employees to work towards a common goal.

Effective persuasion requires a combination of strong communication skills, the ability to understand and address the needs and concerns of your audience, and the ability to build trust and credibility.

Some specific techniques for effective persuasion include:

1) Tailoring your message to your audience: To be effective, your message needs to resonate with your audience.

This means taking the time to understand their needs, interests, and concerns, and tailoring your message accordingly.

2) Providing evidence and examples: People are often more convinced by evidence and examples than by abstract arguments. By providing concrete evidence and examples to support your message, you can make it more compelling and convincing.

3) Building trust and credibility: People are more likely to be convinced by someone they trust and respect.

Building trust and credibility can involve being transparent and honest, demonstrating expertise and knowledge, and being consistent and reliable.

4) Using storytelling: Stories can be a powerful way to persuade people, as they can help to create an emotional connection and engage people's imaginations.

By telling stories that illustrate your message, you can make it more memorable and persuasive.

Overall, the ability to persuade others is a critical skill for success in business, and mastering the art of persuasion can help you to achieve your goals and build strong relationships with customers, investors, and employees.

To know more about persuasion visit link :

https://brainly.com/question/31349463

#SPJ11

The kinetic energy of the mass is a maximum both when the spring is most compressed and when the spring is most stretched.

This is because at these points, the spring is exerting the maximum force on the mass, causing it to accelerate and reach its maximum kinetic energy. When the spring is at its unweighted length, there is no force being applied to the mass by the spring, so the kinetic energy is not at its maximum.

The kinetic energy of the mass is at its maximum when the spring is at its unweighted length (when it isn't stretched or compressed). At this point, all the potential energy stored in the spring has been converted into kinetic energy, resulting in maximum motion of the mass.

To know more about kinetic energy click here .

brainly.com/question/26472013

#SPJ11

The locust jumped a total distance of 0.750 m at an angle of 55.0°. Using the sine and cosine functions, we can calculate the horizontal and vertical components of the jump.

Angle is a geometric figure formed by two lines or rays diverging from a common point. It is measured in degrees, and is used to indicate the amount of turn between the two lines or rays. Angles are often used in geometry, engineering, and physics to measure the size of objects or the amount of turn in a path. Angles are also used to indicate direction, such as in a compass. In mathematics, angles can be used to calculate the area and volume of shapes, as well as the length of curves.

The horizontal component is 0.666 m and the vertical component is 0.450 m. This means the locust jumped 0.666 m horizontally and 0.450 m vertically.

To learn more about angle

https://brainly.com/question/26262923

#SPJ1