What are the Result of reaction between , Isoquinoline and alkali KMNO4 ?​

If the molecules of air are added continuously to the inflatable bag of the car then the pressure of the molecule will decrease as given by Boyle's law.

Boyle's law is a gas law that establishes the relation between the volume and the pressure of the gas. It states the inverse correlation between the two factors respective to the constant temperature.

Boyle's law is given as:

P₁V₁ = P₂V₂

Where an increase in the volume will decrease the pressure of the gas. So, if the air molecules are added to the bag then the pressure inside will reduce.

Learn more about Boyle's law here:

https://brainly.com/question/1437490

#SPJ1

Answer:

2

Explanation:

final velocity: 20

initial velocity: 0

time taken: 10

acceleration: ?

a=( v-u)÷2

a=(20-0)÷2

a=20÷2

therefore acceleration =2

The wavelength of these gamma rays will be  1x1[tex]10^{-13}[/tex] m.

How do you define wavelength?

The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.

The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.

The length of a wave is measured in its propagation direction. The wavelength is measured in meters, centimeters, nanometres, and other units since it is a distance measurement.

The relationship between the wave's wavelength, frequency, and speed is given as

wavelength = speed of light ÷ frequency

wavelength = [tex]\frac{3 X10^8}{3.0 X10^{21}}[/tex]

wavelength = 1x[tex]10^{-13}[/tex] m

Hence the wavelength of these gamma rays will be [tex]1 X 10^{-13}[/tex]m.

To learn more about the wavelength refer to the link;

brainly.com/question/7143261

#SPJ1

In an exothermic reaction, the reactants have more energy than the products.

Answer:

False

Explanation:

There are two types of covalent bonding: polar covalent boding and nonpolar covalent bonding. During polar covalent bonding, the electrons are not shared evenly. This is due to the electronegativity differences between the two atoms. During nonpolar covalent bonding, the electrons are shared evenly.

The partial pressure of oxygen, P(O₂) is 198.83 mmHg.

The partial pressure of a gas is the pressure gas will exert in a mixture of gases which do not react chemically together.

The sum of partial pressure of gases at atmospheric pressure = 760 mmHg

P(N₂) +  P(H₂O) + P(CO₂) + P(O₂) + P(other) = 760 mmHg

P(N₂) = 0.72 atm = 547.2 mmHg

P(H₂O) = 7.7 torr = 7.7 mmHg

P(CO₂) = 0.37 mmHg

P(other) = 0.97 kPa = 5.9 mmHg

P(O₂) = 760 - (547.2 + 7.7 + 0.37 + 5.9) = 198.83 mmHg

Therefore, the partial pressure of oxygen, P(O₂) is 198.83 mmHg.

Learn more partial pressure at: https://brainly.com/question/14119417

#SPJ1

The mass and volume has direct proportional to each other.

The volume of the object is directly proportional to its mass which means that if the volume increases the mass of the object increases also increase and vice versa. Due to this direct relationship, the line of regression will go straight between X and Y axis.

So we can conclude that mass and volume has direct proportional to each other.

Learn more about volume here: https://brainly.com/question/1972490

#SPJ1

Q methane = Q water

Q = mcΔt

mass water = V x ρ = 1 L x 1 kg/L = 1 kg

298 K to 373K = 25 °C to 100 °C

c water = 75.2 J/mol K = 4.2 J / g °C = 4200 J/kg °C

Q water = 1 x 4200 x (100 - 25)

Q water = 315000 J

Q methane = Q water = 315000 J = 315 KJ

n (mol) methane = ΔH/Q = 890.4 / 315 = 2.83

PV = nRT

V = nRT/P

V = 2.83 x 0.082 x 298/1

V = 69.15 L

The opportunity costs of working part-time while attending high school could be studying time, grades, and your own free time. It depends on the person, how they do in school, but if it were for me, I would say the benefits outweigh the costs. I have enough time to study and still get good grades in school.

Answer:

I don't know I'm rich student

Explanation:

sorry

Taking into account the definition of density, the volume of a full tank car which contains 3.22×10⁴ kg of acetone is 41.02 m³.

Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.

In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance.

Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

From this expression it can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

In this case, you know that:

Replacing in the definition of density:

[tex]0.785 \frac{g}{cm^{3} }=\frac{32,200,000 g}{volume}[/tex]

Solving:

volume×0.785[tex]\frac{g}{cm^{3} }[/tex]= 32,200,000 g

volume=[tex]\frac{32,200,000 g}{0.785 \frac{g}{cm^{3} }}[/tex]

volume= 41,019,108.28 cm³=  41.01910828 m³≅ 41.02 m³ (being 1 m³ = 1000000 cm³)

In summary, the volume of a full tank car which contains 3.22×10⁴ kg of acetone is 41.02 m³.

Learn more about density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

The time taken for the object to reach to top of pile is 0.012 year.

The time taken for the object to reach to top of pile is calculated as follows;

time of motion = distance traveled/speed

time of motion = (1.1 x 10¹⁴ x 10³ m)/(3 x 10⁸ m/s)

where;

time of motion = 3.67 x 10⁵ sec = 0.012 year

Thus, the time taken for the object to reach to top of pile is 0.012 year.

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

The nuclear fission reaction with the formation of the deuterium has the missing part as ⁴₂He.

Nuclear radiation is given as the reaction in which the emission is formed in the form of the nuclear particles that made the change in the nucleus of the atom.

The nuclear radiation that made the release of ₁¹H can be given to fuse the electron with the He and form:

²₁H + ³₂He →⁴₂He + ₁¹H

Thus, the missing part in the nuclear fission reaction is ⁴₂He.

Learn more about nuclear fission, here:

https://brainly.com/question/16543258

#SPJ1

Explanation:

We gujra weeeeeeeeeeeeeee

We gujra weeeeeeeeeeeeeee

We gujra weeeeeeeeeeeeeee

We gujra weeeeeeeeeeeeeee

Distillation is the process which involves the separation of pure water from impure water.

This is a technique which is used to purify through the boiling and cooling processes in the laboratory and typically involves the use of a liebig condenser.

Pure water is usually collected at 100° celsius with the impurities remaining and filtered out during the process. This is therefore the most apporpriate way of separating pure water from impure water.

Read more about Distillation here https://brainly.com/question/24553469

#SPJ1

Answer: By blowing into the drinking straw to bubble some of their breath in the water, they are adding gas to the water. This will cause the volume of gas to increase.

The students want to increase the volume of gas the pond weed makes in 5 minutes. The students use a drinking straw to bubble some of their breath into the water. The volume of gas the pond weed makes increases because By blowing into the drinking straw to bubble some of their breath in the water, they are adding gas to the water.

This will cause the volume of gas to increase. One way the students could increase the volume of gas the pond weed makes in five minutes is by increasing light intensity. Pond weeds carry out photosynthesis to produce oxygen and light is an essential factor that affects rate of photosynthesis.

If light intensity is increased, more light energy will be available for plant to convert into chemical energy, which can be used in photosynthesis to produce more oxygen. This increases the volume of gas the pond weed makes in given time.

To increase the light intensity, students could move plant closer to a light source or use stronger light source.

To know more about volume of gas here

brainly.com/question/27100414

#SPJ2

Answer:

two may be the answer (2)

Given the heat of fusion of water is 6.02 kJ/mol, it takes 12.9 kJ of heat to melt 38.6 g of ice at 0 °C.

Fusion, commonly known as melting, is a physical process in which matter passes from the solid to the liquid state.

We have ice with a mass of 38.6 g at 0 °C. First, we will convert mass to moles using the molar mass of water.

38.6 g × (1 mol/18.02 g) = 2.14 mol

The heat of fusion (ΔH°fus) for water is 6.02 kJ/mol. The heat (Q) required to melt 2.14 moles of ice is:

Q = 6.02 kJ/mol × 2.14 mol = 12.9 kJ

Given the heat of fusion of water is 6.02 kJ/mol, it takes 12.9 kJ of heat to melt 38.6 g of ice at 0 °C.

Learn more about fusion here: https://brainly.com/question/40140

#SPJ1

The correct statement is Isotopes are members of a family of an element that all have the same number of protons but different numbers of neutrons.

In a simple way to explain, Isotopes are species that have the same atomic number and mass number.

In this case, we can say that the correct statement is proton number of isotopes of an element is same.

See more about Isotopes at brainly.com/question/11680817

#SPJ1

Answer:

Explanation:

The equation says for every 3 moles of barium chloride you can make 2 aluminum chloride.

(8/3)*2 = 5.33 moles

Answer:

false mocktail is liquor yea

Hydrogen, iron, and gallium is the correct answer. Hence, option B is correct.

An electron is a negatively charged subatomic particle.

Let us take another look at the periodic table. The periodic table is composed of metals, metalloids and nonmetals.

Metals lose electrons more easily, that is why they form cations. Metals are found on the left-hand side of the periodic table.

As we move away from the left-hand side of the periodic table, the ability to form cations decreases as metallic character decreases and elements become more nonmetallic.

The noble gas helium rarely loses electrons. Fluorine would rather accept an electron to form a negative ion.

Hence, the elements hydrogen, iron and gallium are metals hence they lose electrons more easily.

Hence, option B is correct.

Learn more about the electrons here:

https://brainly.com/question/1255220

#SPJ1

50.97 g AgNO₃ is needed to make 500.0 mL of 0.600 mol/L AgNO3(aq)

A mole is defined as 6.02214076 × [tex]10^{23}[/tex]of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Molar mass of AgNO₃ = (107.9 + 14.0 + 16.0×3) g/mol = 169.9 g/mol

Molarity = Moles of solute ÷ Volume of solution in litre

0.600 mol/L = Moles of solute ÷ 0.5 mL

Moles of solute =0.3 mol

Moles =[tex]\frac{mass}{molar \;mass}[/tex]

0.3 mol =  [tex]\frac{mass}{169.9 g/mol}[/tex]

Mass =50.97 g AgNO₃

Hence, 50.97 g AgNO₃ is needed to make 500.0 mL of 0.600 mol/L AgNO3(aq).

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

Answer:The first model (full container) represented matter that has a definite shape. The particles were packed tightly and did not have the freedom to rearrange themselves.

Explanation:

Answer:

1.76 * 6.02*10^23 = 1.05952*10^24

1.05952*2 = 2.11904 *10^24 oxygen and 1.05952*10^24 sulfur atoms

In 1.76 moles of SO₂, there are approximately 1.06 x 10²⁴ SO₂ molecules, 1.06 x 10²⁴ sulfur atoms, and 2.12 x 10²⁴ oxygen atoms. For determining the number of SO₂ molecules, sulfur atoms, and oxygen atoms in 1.76 moles of SO₂, we need to use Avogadro's number, which is approximately 6.022 x 10²³ particles per mole.

1 mole of any substance contains Avogadro's number of particles, which includes atoms or molecules. Therefore, to find the number of SO₂ molecules in 1.76 moles, we can multiply 1.76 moles by Avogadro's number:

Number of SO₂ molecules = 1.76 moles × Avogadro's number

Number of SO₂ molecules = 1.76 moles × 6.022 x 10²³ molecules/mol

Number of SO₂ molecules ≈ 1.06 x 10²⁴ molecules

Next, we can find the number of sulfur atoms and oxygen atoms in 1.76 moles of SO₂. In one molecule of SO₂, there is 1 sulfur atom and 2 oxygen atoms. So, the total number of sulfur atoms and oxygen atoms can be calculated as follows:

Number of sulfur atoms = Number of SO₂ molecules × 1 sulfur atom/molecule

Number of sulfur atoms = 1.06 x 10²⁴ molecules × 1 sulfur atom/molecule

Number of sulfur atoms ≈ 1.06 x 10²⁴ sulfur atoms

Number of oxygen atoms = Number of SO₂ molecules × 2 oxygen atoms/molecule

Number of oxygen atoms = 1.06 x 10²⁴ molecules × 2 oxygen atoms/molecule

Number of oxygen atoms ≈ 2.12 x 10²⁴ oxygen atoms

So, in 1.76 moles of SO₂, there are approximately 1.06 x 10²⁴ SO₂ molecules, 1.06 x 10²⁴ sulfur atoms, and 2.12 x 10²⁴ oxygen atoms.

To know mroe about Avogadro's number:

https://brainly.com/question/28812626

#SPJ3

The enthalpy change for the reaction is 1215.75  kJ/mol.

The term enthalpy change is the energy that accompanies a reaction. Now we have the reaction;  4HNO3(g) + 2H2O(g) → 2N2H4(g) + 7O2(g)

ΔHf HNO3(g) = -134.31 kJ/mol

ΔHf  H2O(g)=     -241.83  kJ/mol

ΔHf N2H4(g) =  97.42 kJ/mol

ΔHf O2(g) = 0  kJ/mol

ΔHreaction = [(2 * 97.42) + ( 7 * 0)] -  [ (4 * -134.31 ) + (2 * -241.83 )

= 194.84 - (-537.25 - -483.66)

=1215.75  kJ/mol

The enthalpy change for the reaction is therefore 1215.75  kJ/mol.

Learn more about enthalpy:https://brainly.com/question/3393755

#SPJ1

%yield = actual/theoretical x 100%

%yield = 16/24 x 100%

% yield = 67%

The mass of the ethylene glycol used is 14.26 g

The freezing point is the temperature at which a liquid is converted to a solid.

Given that;

ΔT = 0.0°C - ( -4.3°C) = 4.3°C

ΔT = 4.3°C

But we know that

ΔT = k m i

m = ΔT/k i

m = 4.3°C/1.86 °C/m * 1

m = 2.3 m

Now;

Let the mass of  ethylene glycol be m

Molar mass of  ethylene glycol = 62 g/mol

Mass of solvent = 100.0 g or 0.1 Kg

Then;

2.3= m/62/0.1

2.3 = m/62 * 0.1

m = 2.3 * 62 * 0.1

m = 14.26 g

Learn more about freezing point:https://brainly.com/question/3121416?

#SPJ1

We can say that the volume of the object is directly proportional to its mass. As the volume increases the mass of the object increases in direct proportion. The gradient of the graph equals the density of the material.

mass MgCl₂ = mol x MM MgCl₂ = 0.05 x 95.211 g/mol = 4.76 g

mass Cl in MgCl₂ :

= (2 x AM Cl)/MM MgCl₂ x mass MgCl₂

= (2 x 35.5 g/mol)/95.211 g/mol x 4.76

= 3.55 g

% mass Cl in the mixture :

= (mass Cl / mass mixture) x 100%

=  3.55 / 9.8 x 100%

= 36.22%