What are the properties of the aluminum in the
can? Check all that apply.
It conducts electricity well.
It is solid
It is brittle.
It does not react easily with water or air.
It is less dense than water.

Answers

Answer 1

Answer:

What are the properties of the aluminum in the can? Check all that apply.

*It conducts electricity well.

*It is solid.

It is brittle.

*It does not react easily with water or air.

It is less dense than water.

Explanation:

a b d

Answer 2

The properties of aluminium (Al) includes electrical conductivity, solid and it does not react easily with water. Therefore, option A, B and D are correct.

What is aluminium?

Aluminium is a common metal we use day to day. It is an electropositive element and due to its metallic nature, Al shows electrical and thermal conductivity. Unlike other metals Al can withstand brittleness and it is ductile in nature.

Aluminium easily reacts with oxygen and forms an oxide layer on its surface so that, it can resist attack by other chemical such as acid or bases as well as oil and water. Hence water does not easily react with aluminium.

Therefore, we can say that aluminium is a solid which conduct electricity and not easily reacts with water.

To learn more about Al, refer the link below:https://brainly.com/question/23755698

#SPJ5


Related Questions

Though alchemists were often superstitious, they left a rich legacy for modern chemists. What was their main contribution?

Answers

though alchemists were often superstitious, they left a rich legacy of modern chemists. what was their main contribution-

Explanation:

they were the first to preform experiments.

A 100-watt light bulb radiates energy at a rate of 100 J/s. (The watt, a unit of power or energy over time, is defined as 1 J/s J/s.) If all of the light emitted has a wavelength of 525nm 525nm, how many photons are emitted per second? Express your answer to three significant figures.

Answers

Answer:

Approximately [tex]2.64\times 10^{20}[/tex] (assumption: wavelength [tex]525\; \rm nm[/tex] is measured in vacuum, where the speed of light is approximately [tex]3.0\times 10^{8}\; \rm m \cdot s^{-1}[/tex].)

Explanation:

Convert the unit of wavelength to meters:

[tex]\displaystyle \lambda = 525\; \rm nm = 525 \; \rm nm\times \frac{10^{-9}\; \rm m}{1\; \rm nm} = 5.25 \times 10^{-7}\; \rm m[/tex].

Assume that the wavelength [tex]525\; \rm nm[/tex] is measured in vacuum, where the speed of light is approximately [tex]2.99792\times 10^{8}\; \rm m \cdot s^{-1}[/tex]. Calculate the frequency of this light from its wavelength:

[tex]\displaystyle f = \frac{c}{\lambda} \approx \frac{2.99792\times 10^{8}\; \rm m \cdot s^{-1}}{5.25 \times 10^{-7}\; \rm m} \approx 5.71429\times 10^{14}\; \rm s^{-1}[/tex].

The Planck's Constant can help find the energy of a photon given its frequency. Look up this constant to more than three significant figures:

[tex]h \approx 6.62607\times 10^{-34}\; \rm J \cdot s^{-1}[/tex].

Calculate the energy of one such photon:

[tex]\begin{aligned} E &= h \cdot f\\ &\approx 6.62607\times 10^{-34}\; \rm J \cdot s^{-1} \times 5.71023\times 10^{14}\; \rm s \\ &\approx 3.78370\times 10^{-19}\; \rm J \end{aligned}[/tex].

Calculate the number of these photons that [tex]100\; \rm J[/tex] of energy can produce under the assumption of [tex]100\%[/tex] conversion:

[tex]\displaystyle \frac{100\; \rm J}{3.78370\times 10^{-19}\; \rm J} \approx 2.64\times 10^{20}[/tex].

(Rounded to three significant figures.)

Is this basalt homogeneous or heterogeneous?

Answers

Answer:

heterogeneous

Explanation:

How many grams of chlorine gas are present in a 150. liter cylinder of chlorine held at a pressure of 1.00 atm and 0. °C? Group of answer choices

Answers

Answer:

474 grams of chlorine gas are present in a 150 liter cylinder of chlorine held at a pressure of 1.00 atm and 0 °C

Explanation:

An ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:  

P*V = n*R*T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas.

In this case:

P= 1.00 atmV= 150 Ln= ?R= 0.082 [tex]\frac{atm*L}{mol*K}[/tex]T= 0 C= 273 K

Replacing:

1.00 atm* 150 L= n*0.08206 [tex]\frac{atm*L}{mol*K}[/tex] *273 K

Solving:

[tex]n=\frac{1.00 atm* 150 L}{0.08206 \frac{atm*L}{mol*K}*273 K}[/tex]

n= 6.69 moles

Being Cl= 35.45 g/mole, the molar mass of chlorine gas is:

Cl₂=2*35.45 g/mole= 70.9 g/mole

So if 1 mole has 70.9 grams, 6.69 moles of the gas, how much mass does it have?

[tex]mass=\frac{6.69 moles*70.9 grams}{1 mole}[/tex]

mass= 474.321 grams ≅ 474 grams

474 grams of chlorine gas are present in a 150 liter cylinder of chlorine held at a pressure of 1.00 atm and 0 °C

A saline solution contains 0.800 g of NaCl (molar mass 58.55 g/mol) in 54.6 mL of solution. Calculate the concentration of NaCl in this solution, in units of molarity Express the concentration in molarity to three significant figures.

Answers

Answer:

0.25 M

Explanation:

Data obtained from the question include:

Molar mass of NaCl = 58.55 g/mol

Mass of NaCl = 0.800 g

Volume = 54.6 mL

Next, we shall determine the number of mole in 0.800 g of NaCl. This can be obtained as follow:

Molar mass of NaCl = 58.55 g/mol

Mass of NaCl = 0.800 g

Mole of NaCl =?

Mole = mass /Molar mass

Mole of NaCl = 0.8/58.55

Mole of NaCl = 0.0137 mole

Next, we shall convert 54.6 mL to litres (L). This can be obtained as follow:

1000 mL = 1 L

Therefore,

54.6 mL = 54.6 /1000

54.6 mL = 0.0546 L

Finally, we shall determine the molarity of the solution as follow:

Mole of NaCl = 0.0137 mole

Volume = 0.0546 L

Molarity =?

Mol= mole /Volume

Molarity = 0.0137/0.0546

Molarity = 0.25M

Therefore, the molarity of the solution is 0.25 M

Buck's Turf Care Company mowed 229 lawns over a 18 week period. What is the average weekly rate of mowing lawns?

Answers

Answer:

Average weekly rate of mowing lawns = 13 lawns (Approx)

Explanation:

Given:

Total lawns mowed = 229

Total number of period = 18 week

Find:

Average weekly rate of mowing lawns

Computation:

Average weekly rate of mowing lawns = Total lawns mowed / Total number of period

Average weekly rate of mowing lawns = 229 / 18

Average weekly rate of mowing lawns = 12.72

Average weekly rate of mowing lawns = 13 lawns (Approx)

Lead has a density of 11.34 g/mL, if you weigh an empty beaker and it weighs 245.61 grams, then add lead until the scale reads 350.52 grams, what is the volume of lead that you have? *

Answers

Answer:

Explanation:

wt. of the lead = wt. of ( flask + lead) - wt.of the empty flask

                      350.52- 245.61= 104.91 grams of lead

density = mass/volume

11.43= 104.91/V

V =  9.178 ml

A sprinter is running 200.0 m in 21.9s. What is the average speed of the sprinter in km per hour?

Answers

Answer:

Average speed = 333.3 km/hr

Explanation:

The average speed of a body can be found by using the formula

[tex]Average \: \: speed = \frac{distance}{time} [/tex]

To find the average speed in km/h first convert the distance from m to km and the seconds from s to hr.

For the distance

2000 m

1000 m = 1 km

2000 m = 2000/1000 = 2 km

For the seconds

21.9 s

3600 s = 1 hr

21.9 s = 21.9/3600 = 0.006 hrs

Substitute the values into the above formula and solve for the Average speed

That's

[tex]Average \: \: speed = \frac{2}{0.006} [/tex]

We have the final answer as

Average speed = 333.3 km/hr

Hope this helps you

Archimedes tells us the lifting power of a balloon (how much mass it can lift) is equal to the difference between the mass of the balloon and the mass of the air it displaces. That is, if the balloon occupies the same volume as 10 kg of air, but the balloon only weighs 2 kg, then the balloon can lift 8 kg. gas densityH2 0.09 kg/m3He 0.18 kg/m3Air 1.23 kg/m3 Airships have sometimes been filled with hydrogen (H), but hydrogen is very flammable, and after the Hindenburg caught fire and crashed in 1937 with serious loss of life airships have nearly always been filled with helium (He) instead. Suppose a new airship Star of Balogna will have the shape of a cylinder 40. m long, with a radius of 4.0 m, and will weigh 750. kg without any gas inside it. Suppose also the average passenger weighs 80 kg. Calculate how many passengers the Balogna could carry if it were filled with hydrogen, and also if it were filled with helium. Passengers with Hz: 29Passengers with He: 26

Answers

Answer:

the Balogna could carry  19 passengers if filled with Hydrogen.

the Balogna could carry  17 passengers if filled with Helium.

Explanation:

Given that:

the radius of the cylinder r = 4.0 cm

the height h = 40 m

the volume of the cylinder will be:

[tex]V = \pi r^2 h[/tex]

V = π (4.0 m)² (40)

V = 2010.62 m³.

where the density of the air = 1.23 kg/m³

the mass of the displaced air = Volume V ×density of the air

= 2010.62 m³ × 1.23 kg/m³

= 2473.0626 kg

To calculate how many passengers the Balogna could carry if it were filled with hydrogen, we have the following:

We are given the density of H₂ to be = 0.090 kg/m³

Therefore, the mass of Helium in the balloon = Volume V × density of the hydrogen

= 2010.62 m³ × 0.090 kg/m³

= 180.9558 kg

The total mass of the balloon = mass of H₂ + mass of empty balloon.

The total mass of the balloon = (180.9558+ 750) kg

= 930.9558 kg

Now, the Mass difference = mass of the air displaced -total mass of the balloon.

the Mass difference =  (2473.0626 - 930.9558 ) kg

the Mass difference =  1542.1068 kg

number of persons = mass difference/ mass of passenger

the number of persons = 1542.1068 kg /80 (kg/person)

the number of persons = 19.27 persons

the number of passengers [tex]\simeq[/tex] 19 passengers.

To calculate how many passengers the Balogna could carry if it were filled with helium, we have the following:

We are given the density of Helium to be =  0.18 kg/m³

Therefore, the mass of Helium in the balloon = Volume V × density of the hydrogen

= 2010.62 m³ × 0.18 kg/m³

= 361.9116 kg

The total mass of the balloon = mass of Helium + mass of empty balloon.

The total mass of the balloon = (361.9116 + 750) kg

= 1111.9116 kg

Now, the Mass difference = mass of the air displaced -total mass of the balloon.

the Mass difference =  (2473.0626 - 1111.9116 ) kg

the Mass difference =  1361.151 kg

number of persons = mass difference/ mass of passenger

the number of persons =  1361.151 kg /80 (kg/person)

the number of persons = 17.01 persons

the number of passengers [tex]\simeq[/tex] 17 passengers.

Light travels at roughly 3.00×108ms. What is this speed in miles per minute? Use 1mi=1609.344m and 60s=1min.

Answers

Answer:

1.12x10⁷ mi / min

Explanation:

Speed is a magnitude defined as the distance an object travels per unit of time.

Speed light is 3.00x10⁸ m/s. To convert this to miles per minute we need to convert the meters to miles and the seconds to minutes:

3.00x10⁸ m/s * (1mi / 1609.344m) = 186411.4 mi/s

186411.4 mi/s * (60s / 1min) =

1.12x10⁷ mi / min

Indicate the net charge of lysine at pH 9.5.

Answers

Answer:

Explanation:

An amino acid like lysine has both the acidic and basic group . They are amphoteric in nature ie they can react with both acid and base . In acidic or basic medium they carry charge of either positive or negative nature .

Lysine is also an amino acid . It has both acidic and basic group . The pka value of its basic side chain is 10.5 . Hence at pH more than it it is neutral or have no charge but at pH value less than 10.5 , it acquires H⁺ ion and becomes positively charged

Hence at pH value of 9.5 which is less than 10.5 , it will be positively charged . It will have net charge of + 1 .

----    NH₂  + H⁺ =     ------ NH₃⁺

VSEPR theory predicts an identical shape for all of the following, except:_______. A. NH_3 B. H_3O^+ C. BH_3 D. CH_3^+ E. All of these choice same geometry.

Answers

Answer:

C. BH_3

Explanation:

The VSEPR is known as the valence shell electron pair repulsion theory. The VSEPR theory determines the total number of electron pairs (TEP) surrounding the central atom of a species. The TEP consists of the bond pairs (BP) and lone pairs (LP). In this model, all the electron pairs (like charges) will orient themselves in such a way as to minimize the electrostatic repulsion between them. These repulsions determine the geometry of the covalent bonds around the central atom.

In the options given, all the molecules have identical geometry except BH_3. This is as a result of the absence of a lone pair on the BH_3 compound.

You are given a mixture consisting of marbles, iron filings, sugar and sand. Suggest a series of steps for separating this mixture. You may make a flowchart, but be careful to fully explain each step (Why are you using that method?). When you are finished, you should have each component of the mixture in a separate beaker.

Answers

Answer:

Explanation:

Start by sifting the marbles out bc they are bigger they will sit in a big sifter

Than with a magnet roll it in what’s left this will pick up all the iron pieces

Than Fill with water and stir this should resolve the sugar which after you sift out the sand you can heat and scrape off beaker and than for a very short time heat up the sand to dry it and not have extra weight from the water

!!!sand only for a few seconds or else it will fly everywhere and if it gets in eye it will sting badly

find how many natural numbers are there between 80 and 120 step by step plz​

Answers

There are 40 neutral numbers
120-80=40

Date
Pages
Equivalent weight of the compound
caco3​

Answers

Answer:

CaCO3,which is Calcium Carbonate. It’s equivalent mass is 50 g. Explanation:-. Mass of CaCO3=Mass of 1 atom of Calcium (Ca)+Mass of 1 atom of Carbon (C)+Mass of 3 atoms of Oxygen (O). Mass of 1 atom of Calcium=1×40g=40g. Mass of 1 atom of Carbon=1×12g=12g. Mass of 3 atoms of Oxygen=3×16g=48g.

Explanation:  Hope this helps :)

A sample of motor oil has a mass of 440 g and a volume of 0.27 L. What is its
density (in g/mL)?

Answers

Answer:

Density =1.63 g/mL

Explanation:

The density of a substance can be found by using the formula

[tex]Density = \frac{mass}{volume} [/tex]

To find the density in g/mL , we must first convert the volume from L to mL

From the question

mass = 440 g

1 L = 1000 mL

0.27 L = 0.27 × 1000 = 270 mL

volume = 270 mL

Substitute the values into the above formula and solve for the Density

That's

[tex]Density = \frac{440}{270} [/tex]

= 1.629629...

We have the final answer as

Density =1.63 g/mL

Hope this helps you

When neurotransmitter is released into the synaptic cleft, it is taken up by the post-synaptic neuron.

Answers

Answer:

Plz make me brainliest

Explanation:

The neurotransmitters released into the cleft diffuse through it to reach the post-synaptic neuron. Neurotransmitters remain in cleft for only some time. They are either taken up by the presynaptic neuron or are broken down by the enzymes present in the synaptic cleft. The post-synaptic neuron contains several receptors on its plasma membrane

What are the laws of Newton?

Answers

Answer:

an object that is at rest will stay at rest inless a force acts upon it.

An oject that is in motion will not change its velocity unless a force acts upon it.

Answer:

First law

In an inertial frame of reference, an object either remains at rest or continues to move at a constant velocity, unless acted upon by a force.[2][3]

Second law

In an inertial frame of reference, the vector sum of the forces F on an object is equal to the mass m of that object multiplied by the acceleration a of the object: F = ma. (It is assumed here that the mass m is constant – see below.)

Third law

When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body.

think about an inflated balloon and a small bag of marbles that is half its size . which one has more volume explain

Answers

The object with more volume is the inflated balloon

Explanation:

Volume is about how much space an object or material occupies; in this context, if the inflated balloon has the double size of the bag of marbles then the balloon has more volume because this is occupying more space.

Moreover, the volume should not be confused with other factors such as mass or weight because it is likely the marbles weight more but this does not imply the marbles have more volume. Also, the balloon contains gas and gases tend to expand and occupy more space, which does not occur with solids such as marbles because these have a defined volume.

What’s the correct IUPAC name for the compound shown here?

Answers

Answer : The correct IUPAC name for the compound is, 2,2,4,5-tetramethyl-3-ethylhexane.

Explanation :

The basic rules for naming of hydrocarbons are :

First select the longest possible carbon chain.

The longest possible carbon chain should include the carbons of double or triple bonds.

The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne by adding the suffix -yne.

If two or more similar alkyl groups are present in a compound, the prefixes di-, tri-, tetra- and so on are used to specify the number of times of the alkyl groups in the chain.

In the give compound, the longest possible carbon chain has 6 carbon atoms. So, the prefix used will be 'hex-' and also the carbon has single bond between them, so it is an alkane. Four methyl group is present at 2,2,4,5 position of carbon chain and one ethyl group is present at 3 position.

Hence, the correct IUPAC name for the compound is, 2,2,4,5-tetramethyl-3-ethylhexane.

Tetramethyl-2,2,4,5-ethylhexane is the proper IUPAC name for the substance.

Basic guidelines for hydrocarbon naming are as follows:

Choose the longest carbon chain you can.

The carbons of double or triple bonds should be included in the longest carbon chain possible.

The suffixes -ane, -ene, and -yne are used in the naming of alkane, alkene, and alkyne, respectively.

If a compound has two or more identical alkyl groups, the prefixes di-, tri-, tetra-, and so on are used to indicate how many times the alkyl groups are present in the chain.

The longest feasible carbon chain in the given chemical contains 6 carbon atoms. Since there is only one bond between the carbon atoms, the prefix will be "hex-," and an alkane is what is being described. On the carbon chain, there are four methyl groups at positions 2, 2, 4, and 5, and one ethyl group at position 3. Consequently, 2,2,4,5-tetramethyl-3-ethylhexane is the right IUPAC designation for the substance.

To know more about IUPAC, here:

https://brainly.com/question/33646537

#SPJ6

A children’s pain relief elixir contains 10.6 cg acetaminophen per 1 teaspoon. The dosage recommended for a child who weighs 34 lbs, is 1.5 teaspoons. What is the dosage of acetaminophen, expressed as mg acetaminophen/kg body weight, for a child weighing 34 lbs?(1 kg=2.205 lbs)

Answers

Answer:

Dosage of acetaminophen = 15.9 cg acetaminophen

Explanation:

Given:

1 teaspoon = 10.6 cg acetaminophen

Dosage to 34 lbs child = 34 lbs

Given dose = 1.5 teaspoon

Find:

Dosage of acetaminophen

Computation:

⇒ Dosage of acetaminophen = 1.5 teaspoon × [10.6 cg acetaminophen]

Dosage of acetaminophen = 15.9 cg acetaminophen

what does control mean in scientific method

Answers

Answer:

A scientific control is an experiment or observation designed to minimize the effects of variables other than the independent variable. This increases the reliability of the results, often through a comparison between control measurements and the other measurements.A scientific control is an experiment or observation designed to minimize the effects of variables other than the independent variable. This increases the reliability of the results, often through a comparison between control measurements and the other measurements.

Explanation:

Let's all give it up for GOOGLE! where you can literally get an answer to something.

A compound contains 16.7 g of iridium and 10.3 g of selenium, what is its empirical formula?

Answers

Answer:

THE EMPIRICAL FORMULA OF THE COMPOUND IS Ir Se2

Explanation:

Iridium = 16.7 g

Selenium = 10.3 g

Total mass = 16.7 + 10.3 = 27 g

To calculate the empirical formula, we first calculate the percentage com[position of the individual elements.

Percentage composition of iridium = 16.7 / 27 * 100 = 61.85 %

Percentage composition of selenium = 10.3 / 27 * 100 = 38.15 %

Next is to divide the percentage composition of each element by their respective molecular masses

Molecular mass of iridium = 192 g/mol

Molecular mass of selenium = 79g/mol

Iridium = 61.85 / 192 =  0.3221

Selenium = 38.15 / 79 = 0.4829

Next is to divide the values by the smaller of the two values

Iridium = 0.3221 / 0.3221 = 1

Selenium = 0.4829 / 0.3221 = 1.5

Next is to round up the values to a whole number

Iridium = 1

Selenium = 2

The empirical formula therefore is Ir Se2

Lap safety rules crossword

Answers

Show the crossword image.

The mole is derived from the quantity of atoms in 12 grams of carbon-12. The mole is just a number, it can be used for:_________

Answers

Answer:

Explanation:

A mole is the amount of substance that contains as many elementary entities as there are carbon atoms in 12 grams of carbon -12 isotopes i.e. it is the amount of a substance that posses the same number of particles as the number of atoms in exactly 12g of carbon is 12.

The number of atoms in a mole is known to be the Avogadro Number which is equal to 6.02 × 10²³. Thus, a mole of any substance is that amount of the substance which contains 6.02 × 10²³ particles of that substance. The definition of the mole is also given by the relationship:

[tex]\mathtt {moles = \dfrac{ mass \ in \ grams}{ relative \ molecular \ mass}}[/tex]

Calculate the degree of unsaturation (or IHD, Index of Hydrogen Deficiency) for C8H12.

Answers

Answer:

4.

Explanation:

Hello,

In this case, for the calculation of the degree of unsaturation, we apply the following formula:

[tex]Degree\ of \ insaturation=C-\frac{H}{2}[/tex]

Thus, since we have eight carbon atoms and twelve hydrogen atoms, it turns out:

[tex]Degree\ of \ insaturation=8-\frac{12}{2}=8-6=4[/tex]

It means that four substituents are missing in order saturate the molecule.

Regards.

help pls with chemistry question​

Answers

Answer:

1×10⁸ Hz.

Explanation:

From the question given above, the following data were obtained:

Wavelength (λ) = 3 m

Frequency (f) =?

The wavelength of a wave and it's frequency are related by the following equation:

Velocity (v) = wavelength (λ) × frequency (f)

v = λf

With the above equation, we can obtain the frequency of the light wave as follow:

Wavelength (λ) = 3 m

Velocity (v) of light = 3×10⁸ m/s

Frequency (f) =?

v = λf

3×10⁸ = 3 × f

Divide both side by 3

f = 3×10⁸ / 3

f = 1×10⁸ Hz

Therefore, the frequency of the light wave is 1×10⁸ Hz

Which is not true about the liquid state of matter?


The liquid state has a definite volume and a definite shape.

The liquid state takes on the shape of its container.

The liquid state has a definite volume and an indefinite shape.

The particles in a liquid can easily move past each other.

Answers

Answer:

The liquid state has a definite volume and a definite shape.

What should scientists do after completing a scientific investigation?
o write a hypothesis
confirm the results
O design the procedure
make observations

Answers

Steps of a scientific investigation include identifying a research question or problem, forming a hypothesis, gathering evidence, analyzing evidence, deciding whether the evidence supports the hypothesis, drawing conclusions, and communicating the results.

D. Make observations

The first thing you do is write a hypothesis then you were designed your procedure, after you make the procedure you would do the procedure, after you do the procedure you would confirm the results, then at the end you would make observations to see that everything is correct.

Place these hydrocarbons in order of decreasing boiling point. Rank from highest to lowest boiling point. 1. Paraffin, C40Hg2 2. Propane, G2H53. Hexane, C6H14 4. 2,2-dimethylbutane, C6 H14 5. Heptadecane, C17H36A. Highest BPB. Highest BP

Answers

Answer:

Paraffin > Heptadecane > Hexane > 2,2-dimethylbutane > Propane

Explanation:

It must first be establish that all the molecules listed in the question are alkanes. For alkanes, the intermolecular forces between the molecules of alkanes increases with increasing molecular weight. This is as a result of increase in the surface area of the molecule. Increase in surface area implies a greater degree of dispersion forces.

This is the reason why high boiling points are observed for high molecular weight alkanes.

Other Questions
What has Ms. Nappier done to help the students comprehend what they are reading? How will reviewing the story elements help the students as they read? Reflect. The Midwest is a part of the United States that is made up of many different states. People describe these states as the Midwest because they share many qualities. Because it is grouped together for this reason, the Midwest can best be described as a __________. A. region B. theme C. space D. system Using the map above, what number is on the state with the capital city of Tallahassee? Shading is an important part of drawing realistic art. In a one-paragraph essay, define shading and describe the process used to shade a drawing successfully. Write four to five complete sentences in your own words. Be sure to use correct spelling, punctuation, and grammar. Read the excerpt from the Fourteenth Amendment ofthe United States Constitution.This Fourteenth Amendment clause means thatThe Congress shall have power to enforce, byappropriate legislation, the provisions of this article.A) Congress cannot do anything in relation to theFourteenth Amendment.B) all states have the authority to make laws to applythe amendmentC) all citizens will be subject to the same set of legalprocedures.D) Congress has the authority to make laws to applythe amendment. Most major cities and towns in the United States during the 18th centurywere located near F waterwaysG central areas of the countryH mountainsJ warm areas of the country Need help ASAPHow many cups of water are needed to make 2 servings of soup?8 cups of water = 10 servings Who is you crush and no cappin 7.)__________ veces vas a la biblioteca durante la semana? A coupon subtracts $17.95 from the price p of a pair of headphones. You pay $71.80 for the headphones after using the coupon. Write and solve an equation to find the original price of the headphones. Why does the myth explain that each tribe has its own gift? to show why the tribes dislike each other to show why the tribes admire each other to show the Maasai's view that each tribe has a purpose to show the Maasai's view that some tribes are inferior If u burn paper in the jar, is it the same mass as before u burn it or less or more. Why does the problem of finding the zeros (i.e. the inputs where a function assumes the value zero) receive such disproportionate attention in algebra?A. Because the problem of finding where a function f assumes the value c, i.e. solving f(x) = c, is equivalent to finding where the function f(x)-c assumes the value zero; and c = O is the only number for which f(x) = c can be solved by factoring f(x). B. It's because usually you want to know where a function crosses the x-axis. Crossing a different axis parallel to that is just not that interesting. C. It's because knowing the zeros allows you to determine the end behavior of the function, and the vertical and horizontal asymptotes. D. Because O is the lowest value (i.e. the minimum) that a function can assume. In many math applications, we need to know the minimum value of a quantity. Its bath time while filling the tub dad used the last capful of bubble bath.after doing quick search for more to buy he notices that he can get 36oz for $3.79 or 24 oz for $2.89. Which of these options is the better deal ? What is 4.26 + 1.3 ? witch line from this excerpt best supports the authors message that some things in life are out of peoples control? middle school LA or English story outsiders i have a time limit of 5 min so i need help asap. Chen is baking muffins and banana bread for a brunch buffet. He needs 3 and one-fifth cups of flour to make the muffins and 3 and two-thirds cups of flour to make the banana bread. Which is the best estimate of the number of cups of flour that Chen needs to bake both recipes? 6 cups of flour 7 cups of flour 8 cups of flour 9 cups of flour mylar balloons cost $1.25 each, and latex balloons cost $0.75 each. What equations can be used to find the number of each type of balloon in a bunch of 18 balloons that cost $19? Solve 16x + 9 = 9y 2x for y.y = Which particles contribute to the atomic number and why ??