What are the products of the following reactions? (A trace amount of acid is present in each case.)A. cyclopentanone + cyclohexylamineB. 3-pentanone + butylamineC. 3-pentanone + cyclohexylamine

Atomic radius decreases because the effective nuclear charge increases. Option C

We know that the atomic radius can be defined as the measured distance between the nucleus and the electrons that lies far outside in  the outermost shell of the atom.

We know that the atomic radius is one of the periodic properties that we have in the atom. It is a periodic property that decereases across the period but increases adown the group.

As we add more protons to the nucleus of the atom, the attractive forces would increase and the atomic radius would now tend to decrease across the period for the atoms of elements.

Thus, the greater the effective nuclear charge that we have in the atom, the lesser the atomic radius of the atom.

Learn more about atomic radius:https://brainly.com/question/13607061

#SPJ1

irradiation of quartz that contains traces of aluminum will produce cairngorm

To produce the morion variety of peaty quartz, any quartz can be irradiated. Furthermore, when exposed to 0.5 to 1.5 mrd of ores 60, gamma, X-ray, or electron radiation, all quartz would then turn a blackish or brownish colour. However, this will not result in uniform colour. Irradiated smoky quartz does not present any radiation risk. Irradiating a crystal causes some energy to accumulate in the crystalline structure, which can change the optical characteristics, most notably the colour. For centuries, gem nutrients have indeed been prized and sought after. If they are transparent, they can be segmented and refined to create attractive stones to be used in jewellery and other ornamental purposes

Learn more about electron here:

https://brainly.com/question/1255220

#SPJ4

The concentration, in m/v percent, of a solution prepared from 50. g nacl and 2.5 l of water is 2 %.

The mass/volume percent is the ratio of a solution's total volume to the mass of the solute that makes up that solution. Since this type of concentration has been expressed as a percentage, the given proportion should be multiplied by 100.

The calculation if concentration is shown as:

It can be calculate as follows:

% NaCl = Mass of NaCl / Total mass × 100 %

% NaCl = 50 gram / 2500 × 100 %

%  NaCl = 2 %.

As a result, the solution made from 50 g of nacl and 2.5 l of water will have a 2% concentration.

To know more about concentration

brainly.com/question/10695134

#SPJ4

The correct option is e)t  a and b only. Riboflavin and deoxyribose are both components of the molecule, while phosphodiester bonds link the two together.

Molecule is a group of two or more atoms held together by covalent bonds. The atoms that make up a molecule can be from the same element, such as two hydrogen atoms, or from different elements, such as a hydrogen atom and an oxygen atom. Molecules can be as small as two atoms or as large as thousands of atoms. The properties of a molecule depend on how the atoms are arranged and the type of bonds that are formed.

Riboflavin is a B vitamin found in foods such as milk, eggs, and green vegetables, while deoxyribose is a five-carbon sugar that forms the backbone of DNA. Phosphodiester bonds are covalent chemical bonds which link the two components of the molecule together.

To know more about molecules click-

https://brainly.com/question/475709

#SPJ4

Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei), location in the periodic table, and chemical element. Still, they have different nucleon numbers (mass numbers) as a result of having a different number of neutrons in their nuclei. Although the chemical properties of each isotope of a given element are nearly identical, they differ in their atomic weights and physical characteristics.

Along with 27 radioisotopes, copper (29Cu) has two stable isotopes: 63Cu and 65Cu. The radioisotope 67Cu, with a half-life of 61.83 hours, is the most durable; 54Cu, with a half-life of roughly 75 ns, is the least stable. A minute or less is the average half-life.

The percentage of copper atoms in 65 Cu is 25%.

To get a detailed explanation:

https://brainly.com/question/13307464

#SPJ4

The half-lives that have occurred if a radiometric analysis of an isotope and its stable element yielded 50% is 1. Hence, the option E is correct.

The half-life of a chemical reaction can be described as the time taken for the concentration of a given reactant to reach 50% of its initial concentration (i.e. the time taken for the reactant concentration to reach half of its initial value). Half-live of a reaction is denoted by the symbol 't(1/2)' and is usually expressed in seconds.

Radiometric analysis is one of the oldest methods used for the quantitation of drug molecules. Radiometric analysis generally involves quantitation of radiation from beta-emitting radioactive isotopes such as ¹⁴C, ³H or ³²P.

Learn more about half-life from the link given below.

https://brainly.com/question/14472652

#SPJ4

The amount of sample left after 3.40 hours will be 338 mg.

T= Half life x log (m./m)/log(2)

You could use this formula:

Where Th = half-life.

M. = the  beginning mount

M = the ending amount

T= 3.40 hours

Half life = 2.4463.3 min

M.= 0.589g

m= ?

Then plug the number into the given equation:

T=  2.4463 x log(0.589 /m)/log(2)

T= 2.4463 x log (0.589/m) /log(2)

T= 2.4463× -0.22/ log m× 0.3

3.4× 60 = 2.4463× log m ×0.3

log m= 3.4× 60/ 2.4463 ×0.3

log m=  279.4

m= 2.511 g = 251mg

So the amount left after  the 3.40 hours will be = 589- 251 mg = 338 mg of the sample.

To know more about the isotopes , please refer:

https://brainly.com/question/14220416

#SPJ4

You can use the molecular mass of Co with its percentage composition to discover the molar mass of cyanocobalamin is 59.903g.

Read more about atom:

https://brainly.com/question/621740

#SPJ4

The amount of energy required is 319kJ mol ⁻¹.

Wavelength is the distance between identical points in adjacent cycles of a waveform signal propagating in space or along a wire. In wireless systems, this length is usually expressed in meters, centimeters, or millimeters. Wavelength is the distance between two wave crests and the same for wave troughs.

Wavelength can be defined as the distance between two consecutive peaks or valleys. Measured in the direction of the wave. Wavelength is the distance between two wave crests and the same for wave troughs. Frequency is the number of oscillations that pass through a particular point in one second, measured in cycles per second.

Learn more about Wavelength here:- https://brainly.com/question/10728818

#SPJ4

There are two terms that are related to measurements, one is accuracy and other is precision. Therefore, Group A makes the most accurate measurements of the object. The correct option is option D.

The capacity of an instrument to measure an exact number is known as accuracy. In other words, it refers to how closely the measured value resembles a reference or genuine value.

Small readings can be taken to determine accuracy. The modest reading decreases the calculation's inaccuracy. Group A makes the most accurate measurements of the object.

Therefore, Group A makes the most accurate measurements of the object. The correct option is option D.

To learn more about accuracy, here:

https://brainly.com/question/14244630

#SPJ1

176.36g is the molecular weight of the unknown gas

At equal volumes, t2/t1= √M2 / √M1

Let the molecular mass of the unknown gas be x

16.6/5 = √x /4

√x = 16.4 × 4 / 5 = 13.28

x = 13.28*13.28

x = 176.36g

The entire mass of the atoms required to form a molecule per mole, expressed in grams, is what makes up the molar mass, also known as the molecular weight. Grams per mole are used to measure molar mass. The mass of 1 mole of a material, expressed in M grams, is its molecular weight, also known as its molar mass, abbreviated M. The mass of a given substance's molecules is its molecular weight. While molar mass and molecular weight have distinct definitions and measurement systems, their values are equivalent.

learn more about molecular weight/ mass here:

https://brainly.com/question/24727597

#SPJ4

A Lewis structure shows the valence electrons surrounding the atoms.

It shows too many valence electrons

It violates the octet rule for O — there are 10 electrons around the O atom.

Count the valence electrons in the trial structure

5 BP + 15 LP  = 10 + 30 = 40 electrons

1 S =   1 × 6 =  6 electrons

1 O =   1 × 6 =   6

4 F  = 4 × 7 = 28                    

    TOTAL = 40 electrons

The trial structure has the correct number of electrons.

To get the formal charges, we cut the covalent bonds in half.

Each atom gets the electrons on its side of the cut.

Formal charge = valence electrons in isolated atom - electrons on bonded atom

FC = VE - BE  

(a) On S

VE = 6

BE = 5 bonding electrons = 5

FC = 6 - 5 = +1

(b) On O:

VE = 6

BE = 3 LP(six electrons) + 1 bonding electron  = 7

FC = 6 - 7 = -1

(c) On F:

VE = 6

BE = 3 lone pairs(6 electrons) + 1 bonding electron = 6 + 1 =7

FC = 7 - 7 = 0

We must rearrange the valence electrons so that S gets one more and O gets one fewer.

(a) On S

VE = 6

BE =  (3 bonding electrons) = 6

FC = 6 - 6 = 0

(b) On O:

VE = 6

BE = 2 LP(four electrons) + 2 bonding electrons = 6  

FC = 6 - 6 = 0

To know more about central atom visit:-

https://brainly.com/question/29422259

#SPJ4

Question  is Incomplete:

Given that S is the central atom, draw a Lewis structure of OSF4 in which the formal charges of all atoms are zero. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons.

A reaction between an acid and a base occurs when vinegar and baking soda are combined. Baking soda serves as the base, and vinegar is the acid. A gas known as carbon dioxide bubbles and foams as a result of this reaction between the two. Because there is nowhere else for this gas, it expands the balloon, resulting in the self-inflating balloon.

SCIENCE: Carbon dioxide is a gas produced when baking soda and vinegar are combined. The gas starts to extend in the jug and begins to expand the inflatable. The balloon will expand in size the more gas produced.

Because their particles travel at high speeds in all directions, gases expand quickly. Since the carbon dioxide gas has nowhere else to go, it begins to fill the balloon as it fills the bottle. The balloon expands as the carbon dioxide gas fills it.

To learn more about carbon dioxide here

https://brainly.com/question/3049557

#SPJ1

18.3 g of solid precipitate formed during the reaction.

Formula of lead(ii) perchlorate = [tex]Pb(ClO4)_{2}[/tex]

Formula of  sodium sulfate = [tex]Na_2(SO_4)[/tex]

Reaction of lead(ii) perchlorate and sodium sulfate

[tex]Pb(ClO4)_{2}[/tex] + [tex]Na_2(SO_4)[/tex]    ---------->  [tex]PbSO_4(s)[/tex]    + [tex]2Na(ClO4)_{2}[/tex]

moles of  [tex]Pb(ClO4)_{2}[/tex]  =  [tex]\frac{given mass}{ Molar mass}[/tex]

molar mass of [tex]Pb(ClO4)_{2}[/tex] =207+(35.5+ 16*4)*2

molar mass of [tex]Pb(ClO4)_{2}[/tex] =207+ 99.5*2

molar mass of [tex]Pb(ClO4)_{2}[/tex] =406

given mass = 33.17g

moles of  [tex]Pb(ClO4)_{2}[/tex]  =  [tex]\frac{given mass}{ Molar mass}[/tex]    

moles of  [tex]Pb(ClO4)_{2}[/tex] =  [tex]\frac{33.17}{406}[/tex]  

moles of  [tex]Pb(ClO4)_{2}[/tex] = 0.0817 moles

molar mass of [tex]Na_2(SO_4)[/tex]  = 2*23+ 32+ 4*16

molar mass of [tex]Na_2(SO_4)[/tex]  = 46+32+64

molar mass of [tex]Na_2(SO_4)[/tex]  = 142

moles of      [tex]Na_2(SO_4)[/tex]  =      [tex]\frac{given mass}{ Molar mass}[/tex]    

moles of      [tex]Na_2(SO_4)[/tex] = [tex]\frac{8.564}{142}[/tex]  

moles of      [tex]Na_2(SO_4)[/tex] = 0.0603 moles

since in the above reaction [tex]Pb(ClO4)_{2}[/tex] is the solid precipitate so we have to find the weight of [tex]PbSO_4(s)[/tex] formed after the reaction.

Given that the reaction is complete so one of the 2 reactant must completely ends since [tex]Na_2(SO_4)[/tex] have less number of moles than [tex]Pb(ClO4)_{2}[/tex]  so , [tex]Na_2(SO_4)[/tex] will disappear and hence according to Stoichiometry  same number of moles of [tex]PbSO_4(s)[/tex] will form

so number of moles of [tex]PbSO_4(s)[/tex] formed = 0.0603

so, the weight of [tex]PbSO_4(s)[/tex] formed = number of moles formed * molar mass of [tex]PbSO_4(s)[/tex]

so weight of [tex]PbSO_4(s)[/tex] formed  =0.0603 * 303

weight of [tex]PbSO_4(s)[/tex] formed= 18.27 g ≈ 18.3 g

To know more about solid precipitate click on link below:

https://brainly.com/question/11194650#

#SPJ4

The percentage abundance of lithium 6 is 6% and percentage abundance of lithium 7 is 94%.

Relative atomic mass is defined as the ratio of the average mass of atoms of a chemical element in a given sample to the atomic mass constant. The atomic mass constant is defined as being 1/12 of the mass of a carbon-12 atom.

R.A.M = (Mass.no ×Abundance) / (Total abundance)

Let the abundance of Li-6 be x

Relative abundance of Li-7 will be 100−x.

6.94 = (6 × x)+ 7(100−x) / 100

6x + 700 – 7x = 694

X = 6%

Li-6 has 6%, Li-7 has 94% because the sum of the percent natural abundances of all the isotopes of any given element must total 100%.  atoms that have the same atomic number (number of protons), but different mass numbers that is number of protons and neutrons are called isotopes.

To learn more about Relative atomic mass please visit:

https://brainly.com/question/1594226

#SPJ4

An electrolytic cell holding molten mgcl2 is subjected to a continuous current of 0.912 a for 22.5 hours mg is generated

the act of calculating,

electrolytic cell holding molten mgcl2

0.912 A is the constant current (I).

time (t) = 22.5 hours = 81,000 seconds

Mg's molar mass is 24.31 g/mol.

in which there were electrons in reaction 2

Mass (w) is calculated as (molar mass (I) / t / nF =

(w) = 24.31 g/mol, 0.912 A, 81000 sec/2, 96500, and 9.35 gram.

Learn more about electrolytic cell  here:

https://brainly.com/question/4030224

#SPJ4

The relative melting points for each of the solids, and rank them in decreasing order Graphite> sodium chloride> solid ammonia.

More energy is required to overcome them the strong the forces of interaction between the particles are. The melting point rises with increasing energy demand. Thus, a crystalline solid's melting temperature serves as a barometer for stability of it's own lattice.

A solid's freezing temperature is a physical characteristic that can be used to identify a substance. In reality, a solid typically melts across a wide temperature range as opposed to at a single, set temperature. For this reason, speaking of a range of melting point is more useful.

To know more about Melting point visit:

https://brainly.com/question/29578567

#SPJ4

Answer: Soil

Explanation:

Wind, rain, water, and glaciers are all agents of weathering because they can erode materials. Even though Glaciers need certain conditions they can still do damage to the surface of the earth. While soil is what gets eroded or sometimes is the product of erosion occurring.

The study of the atom contribute to our understanding of the periodic table of the elements by providing information about the structure of the atom and the arrangement of the elements.

This study reveals how the elements are arranged.

Understanding atoms let scientists learn more about the building blocks of elements, which helped organize the periodic table. Scientists were able to organize the periodic table using the atomic weights and atomic numbers obtained from experiments that revealed the properties of individual atoms. Which is a system of categorizing the elements based on their atomic qualities, by comprehending the structure of the atom and the arrangement of the components.

Learn more about the atomic:

brainly.com/question/6258301

#SPJ4

NNaO3  is the empirical formula of the compound, a compound contains 27.04% sodium, 16.48% nitrogen and 56.52% oxygen

⇒Find molar mass of each component: N=14.0067, Na=22.98976928, O=15.9994

⇒Convert to moles: N=1.1765797796769, Na=1.1761753530743, O=3.5295073565259

⇒Find smallest mole value: 1.1761753530743

⇒Divide all components by the smallest value: N=1.0003438489011, Na=1, O=3.0008343120781

⇒Round to closest whole numbers: N=1, Na=1, O=3

⇒Combine to get the empirical formula: NNaO3,

The scientific name for nitrogen is N, and it is an element that has no colour nor smell. The ground beneath our feet, the water we drink, and the air we breathe all contain nitrogen. In reality, nitrogen makes up the majority of the atmosphere on Earth, making up around 78% of the atmosphere.

Learn more about empirical formula here:

https://brainly.com/question/11588623

#SPJ4

The potential of the cell helps to evaluate the voltage difference between two half-cells.

Changing the concentration of one solution in the cell will increase the voltage potential of the cell because putting the system further out of equilibrium.

A chemical reaction is affected by three main variables mainly temperature, surface area, and concentration. In an electrochemical cell, the higher concentration allows the increase in voltage difference.

The higher concentration of reactant moves the reaction in the forward direction to react at a higher pace, and as a result, higher voltage is observed.

A concentration cell acts to dilute the more concentrated solution and concentrate the more dilute solution, creating a voltage as the cell reaches an equilibrium.

To know more about voltaic cells:

https://brainly.com/question/24321087

#SPJ4

That the breakdown or dissolution of the drug after administration constitutes the pharmaceutic phase of drug activity, which must occur in medicine composition.

Describe healthcare.

Healthcare can be simply defined as organised medical care provided to an individual, group, or even community by a physician, nurse, or other qualified healthcare practitioner.

However, medically related Patients may contract infections from bacteria, viruses, fungi, and other pathogens while receiving therapy for another ailment.

For this reason, the primary goal of healthcare is to improve quality of life and healthy living through the provision of high-quality healthcare services.

As a result, the nurse is aware that the pharmaceutic phase of drug action, which must occur after administration of the medication, is the drug's breakdown or dissolution.

Learn more about pharmaceutic  here:

https://brainly.com/question/16582232

#SPJ4

The concentration of acid in the original solution is equal to (80/ (xxx + 80)) * (1/1y1y).

Concentration is the ability to focus one's attention on a particular task or activity. It involves the ability to block out distractions and other stimuli in order to concentrate on the task at hand. Concentration requires mental effort and discipline, and it is an essential skill for success in many areas of life. It is particularly important in education, as it helps students to stay focused and retain information. Concentration can also be beneficial for athletes, allowing them to stay focused and in the zone during competition. Finally, it is important for anyone attempting to achieve any sort of goal, as it helps to stay focused and motivated in order to reach that goal.

The concentration of acid in the original solution can be calculated using the following formula:
Concentration = (Mass of Acid/Total Volume of Solution)
Given that 80g of acid was added to the solution, and the resulting concentration of acid is 1y1y times stronger, we can calculate the initial concentration of acid.
Original Concentration = (80 g/80 g + xxx g) * (1/1y1y)
Original Concentration = (80 g/ (80 + xxx)) * (1/1y1y)
Original Concentration = (80/ (80 + xxx)) * (1/1y1y)
Original Concentration = (80/ (xxx + 80)) * (1/1y1y)
Therefore, the concentration of acid in the original solution is equal to (80/ (xxx + 80)) * (1/1y1y).

To learn more about concentration
https://brainly.com/question/26100149
#SPJ4

At 25 K temperature, 0.950 moles of oxygen gas occupy 7.50 l and exert 2.60 atm of pressure.

Ideal gas law will be used to calculate the temperature -

PV = nRT, where Pis pressure, V is volume, n is number of moles, R is gas constant and T is temperature. The value of gas constant to be used in the formula is 0.082 L atm/mol/K

Temperature = (2.60×7.5)/(0.082×0.95)

Performing multiplication in both numerator and denominator on Right Hand Side of the equation

Temperature = 19.5/0.78

Performing division on Right Hand Side of the equation

Temperature = 25 K

Thus, the temperature of oxygen gas is 25 K.

Learn more about ideal gas law -

https://brainly.com/question/25290815

#SPJ4

Answer:

It is not possible to accurately determine whether the system or the surroundings performs work in a chemical reaction without more information about the specific reaction and the conditions under which it occurs.

In general, the work done in a chemical reaction can be affected by several factors, including the pressure, volume, and temperature of the system, as well as the nature of the reactants and products. Some reactions may result in the system doing work on the surroundings, such as when gases expand and do work on their surroundings by pushing against a piston or other external object. Other reactions may result in the surroundings doing work on the system, such as when gases are compressed and their surroundings do work on them. Still other reactions may result in essentially no work being performed, such as when the reactants and products are in equilibrium or when the volume of the system remains constant.

Without more information about the specific reaction in question, it is not possible to accurately determine whether the system or the surroundings performs work.

Kinetic energy directly proportional to the speed and/or the masses of a raised object.

An item possesses kinetic energy when it is in motion. Applying force is necessary if we wish to accelerate an item. We must put forth effort in order to apply a force. Once the job is finished, energy is transferred to the item, which then moves at a new, constant speed.

The amount of kinetic energy that is transmitted is determined by the mass and speed attained. The relationship between kinetic energy and an object's mass and squared velocity is given by K.E. = 1/2 mv².

Thus, Kinetic energy directly proportional to the speed and/or the masses of a raised object.

To know more about kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ1

The standard Gibbs free energy change for the reaction at 25°C is approximately - 111.158 KJ/mol.

To calculate the standard Gibbs free energy (ΔG°) at 25°C for the reaction CH4(g) + 1/2 O2(g) → CH3OH(g), we can use the formula:

ΔG° = ΔH° - TΔS°

where ΔH° is the standard enthalpy change for the reaction, T is the temperature in kelvin, and ΔS° is the standard entropy change for the reaction.

Assigning the respective values given in the question, we have:

ΔG° = (-126.4 kJ/mol) - (298 K)(-51.1 J/mol*K)

= -126.4 kJ/mol - (-15.2418 KJ/mol)

= - 111.158 KJ/mol

Therefore, the standard Gibbs free energy change for the reaction at 25°C is approximately - 111.158 KJ/mol. This value tells us that the reaction is thermodynamically favorable and will tend to occur spontaneously under standard conditions.

To knor more about standard Gibbs free energy click on below link:

https://brainly.com/question/28237924#

#SPJ4

Complete question:

Methanol, CH3OH, can be made by oxidation of methane in limited quantity.

CH4(g) + 1/2 O2(g) CH3OH(g)

ΔH = -126.4

ΔS = -51.1

Calculate ΔG° at 25°C.

Option (c) is correct. Citrate and oxalate are usually added to embalming fluids to act as Preservatives.

A Preservative is defined as a substance or a chemical that is added to products such as food products, beverages, pharmaceutical drugs, paints, biological samples, cosmetics, wood, and many other products to prevent decomposition by microbial growth or by undesirable chemical changes. preservation is implemented in two modes, chemical and physical. Chemical preservation entails adding chemical compounds to the product. Physical preservation involves the processes such as refrigeration or drying. Preservatives are of various types that are suited to certain products and are effective against specific chemical changes.

To learn more about Preservatives please visit:

https://brainly.com/question/4992250

#SPJ4