Answer:
Objective Lenses: Usually you find 3 or 4 objective lenses on a microscope. They almost always consist of 4x, 10x, 40x and 100x powers, when coupled with a 10x (most common) eyepiece lens, total magnification is 40x (4x times 10x) 100x, 400x and 1000x
Explanation:
Objective lenses come in various magnification powers, with the most common being 4x, 10x, 40x, and 100x, also known as scanning, low power, high power and typically oil immersion objectives, respectively
Disolveram-se 6,0g de NaOH em 114,0g de agua , exprime a composicao da solucao em percentagem em Massa de soluto por Massa de solucao
Answer:
i donot know
Explanation:
i done it for the first time
how many moons are in our galaxy if u count all the other planets moons?
What is shawarma in your own words
Answer:
it is a meal that jas tomato,ketchup meat or chicken, mayoneze and cucumbers.
I need help asap please
Will give BRAINLIST for correct answers only
Thank you
A force of 225 N at an angle of 30 degrees to the horizontal displacement. The component of the force that will cause work to be done is?
Answer:
225√3 N
Explanation:
225√3 N
Mete reading a cruise the sale and the bulb in the simple circuit above is the same explain what is the same and what is different in terms of energy
Answer:
:parallel
Explanation:
Potential difference is the difference in potential energy per charge between two different points in an electric circuit. Here is a simpler explanation:
Using the Position vs. time Graph below, showing the motion of two cyclists (Cyclist A and Cyclist B) answer the following question.Do the two cyclists have the same velocity at t = 3 seconds?
Using the information depicted on the distance - time graph, the slope of the graph is could be used to infer the velocity of each cyclist. Hence, cyclist A and B do not have the same velocity at 3 seconds.
The steepness of slope on the distance - time graph gives the velocity of the cyclist. At time, t = 0 ; the cyclist A has a greater slope than cyclist B. Hence, the velocity of the cyclists is different.
Therefore, the cyclists do not have the same velocity at time, t = 3 seconds.
Learn more : https://brainly.com/question/25220539
Which of the following forces exists between objects even in the absence of direct physical contact
A. Contact force
B. Field force
C. Fundamental
Answer:
B. Field Force
Explanation:
Answer:
The Answer is (B) Your welcome!
Hey guys <3
I need some help with this performance task,, physics isn’t my strongest subject so help is much appreciated :)
(4/9 parts)
Answer:
like charges repelunlike charges attractsa 6.00-kg ornament is held at rest by two light wires that form 30° angles with the vertical, as shown in the figure. an external force of magnitude f acts vertically downward on the ornament. the tension exerted by each of the two wires is denoted by t. a free-body diagram, showing the four forces that act on the box, is shown in the figure. if the magnitude of force f is 410 n, what is the magnitude of the tension t?
The equilibrium condition allows finding the result for the tension of the cable that supports the block is:
The tension is: T₁ = 270.66 N
Newton's second law gives a relationship between force, mass and the acceleration of bodies, when the acceleration is zero it is called the equilibrium condition.
A free-body diagram of the forces is shown in the attachment.
Let's write the equilibrium equation for the vertical axis.
2 [tex]T_1_y[/tex] - f - W = 0
2 [tex]T_1_y[/tex] = W + f
Let's use trigonometry to find the tension, as the angle indicates that it is relative to the vertical.
cos 30 = [tex]\frac{T_1_y}{T_1}[/tex]
[tex]T_1_y[/tex] = T1 cos 30
We substitute.
2T₁ cos 30 = W + f
T₁ = m g + f / 2 cos 30
T₁ = [tex]\frac{6 \ 9.8 + 410}{2 \ cos 30}[/tex]
T₁ = 270.66 N
In conclusion using the equilibrium condition we can find the result for the tension of the cable that supports en bloc is:
The tension is: 270.66 N
Learn more here: https://brainly.com/question/14725331
Therese plays lacrosse, but she has injured her ankle and has to take a few weeks off. She is finding that she has a lot of trouble sleeping since she is no longer practicing several days a week. What BEST explains this?
OPTIONS:
A.
She needs regular exercise to move oxygen through the blood.
B.
She clearly requires more exercise than most people to relieve stress.
C.
She is not releasing the endorphins that she used to, and that impacts her sleep.
D.
She is likely not maintaining the healthy habits that she did when she was practicing.
PLEASE NO LINKS
Answer:
C. She is not releasing the endorphins that she used to, and that impacts her sleep.
Explanation:
The best explanation for why Therese is having trouble sleeping is that she is not releasing the endorphins that she used to, and that impacts her sleep.
Hence, the correct option is C.
Endorphins are hormones that are released during exercise. They have mood-boosting and pain-relieving effects. When Therese stops exercising, she is no longer releasing as many endorphins, which can lead to moodiness and difficulty sleeping.
Option A is incorrect because exercise does not directly move oxygen through the blood. Instead, it increases the heart rate and breathing rate, which in turn increases the amount of oxygen that is delivered to the tissues.
Option B is incorrect because there is no evidence to suggest that Therese requires more exercise than most people to relieve stress. In fact, most people find that regular exercise can help to reduce stress levels.
Option D is incorrect because it is unlikely that Therese is not maintaining the healthy habits that she did when she was practicing. Lacrosse is a physically demanding sport, so it is likely that Therese is still eating healthy and getting enough sleep.
Therefore, the best explanation for why Therese is having trouble sleeping is that she is not releasing the endorphins that she used to, and that impacts her sleep.
Hence, the correct option is C.
To know more about endorphins here
https://brainly.com/question/30191658
#SPJ3
PLEASE HELP MY WHOLE GRADE-DEPENDS ON THIS
A motorboat whose speed in water is 5.00 m/s must aim upstream at an angle of 47.5° above the
horizontal in order to travel directly across the river. A. Diagram the physical scenario and add the triangle (2 pt). B. What
is the speed of the river (1 pt)? C. What is the resultant speed of the boat with respect to the shore (1 pt)? D. If the opposite
shore is 191 meters away, how long will it take to get across (1 pt)?
Answer:
C.
Explanation:
Because the speed pf the boat will depends of the driver.
Which of the following is a true statement about learning?
A. Learning does not result in lasting change.
B. Learning happens through experience or practice.
C. Learning does not enable a person to continue to do something.
D. Learning involves activities that happen automatically.
Answer:
B. learning happens through experience and practice.
Which is true for every atom of an element?
A.
It can be seen with a magnifying glass.
B.
It is joined together with another atom.
C.
It has mass and volume.
D.
It is weightless.
Answer:
A
Explanation:
Every atom of an element has its own mass and volume as the atom is the smallest fundamental unit of the matter, therefore the correct answer is option C.
What is the matter?Anything which has mass to keep the same when comparing the hardness of the solid and occupies space is known as matter, mainly there are four states of matter solid liquid gases, and plasma.
As given in the problem statement we have to find the true statement from the given options that is true for every atom of an element,
The size of an atom of an element is a very small order of magnitude so it can not be seen with a magnifying glass, therefore, option A is not the correct response.
Thus, every atom of an element has its own mass and volume as the atom is the smallest fundamental unit of the matter, therefore the correct answer is option C.
To learn more about the matter here, refer to the link ;
brainly.com/question/9402776
#SPJ2
Find the efficiency of a machine that does 800J of work if the input work is 2,000J
Answer:
Efficiency: 0.4 (40%)
Explanation:
The efficiency of a simple machine is given by the ratio
n = w¹/w²
where
w² is the input work of the machine
w¹ is the output work of the machine
For the machine in this problem, we have:
w¹ = 800j is the output work
w² = 2000j is the input work
Therefore, the efficiency of the machine is
n = 800/2000 = 0.4
Which can be also written as percentage:
n = 0.4 × 100 = 40%
hope it helps you
The horizontal rows on the periodic table are called
Answer:
periods or series
Explanation:
The elements are arranged in seven horizontal rows, called periods or series, and 18 vertical columns, called groups. Elements in the periodic table are organized according to their properties.
brailiest pls
5) Find the length of guitar string that would vibrate at a fundamental frequency of 825 Hz if the string is stretched so that the velocity of waves on the string is 580 m/s?
Áp dụng công thức tính độ dài ạ
You can't see anything if time stop..
Explain
You can't see anything if time would stop:
This is in fact true...if time stops then photons will also stop and they will unable to reach your eyes, so would your metabolism and cellular activity. Thus you won't be able to see anything.
Hope this helped you- have a good day bro cya)
Answer:
You can't see anything if time stop..
Explanation:
IG
A delivery truck travels 18 blocks north, 10 blocks east, and 16 blacks south What is the
distance traveled and displacement? Assume all blocks are the same length
Force Unit
Answer:
Traveled north = 18 blocks
Traveled east = 10 blocks
Traveled south = 16 blocks
So total distance = (18+10+16) blocks = 44 blocks
as north and south are opposite
so traveled displacement from up to down is = (18-16) blocks = 2 blocks
and starting to east distance is 10 blocks
so using pythagoras theorem the displacement
= [tex]\sqrt{10^{2}+2^{2} }[/tex] blocks
= [tex]\sqrt{104}[/tex] blocks
= [tex]2\sqrt{26}[/tex] blocks
= 10.198 blocks (approx.)
ANS: distance=44 blocks, displacement=10.198 blocks (approx.)
Explanation:
NEED HELP!!! IF YOU ANSWER ALL QUESTIONS I WILL GIVE YOU BRAINEST!!!!! 15 POINTS!!!!
1. How does Newton’s second law of physics apply to lifting weights?
A.
Lifting weights requires the proper form and net force.
B.
Without force or motion, the weights are an unbalanced force.
C.
It requires more force to move weights, and this builds muscles.
D.
Weights are an immovable object, and the force is provided by muscles.
2. Why would oxygen levels make a difference in athletic performance?
A.
Muscles need oxygen to function well.
B.
It is just one biometric that is studied.
C.
Oxygen is important for everyone, not just athletes.
D.
Athletes require less oxygen than those who are less active.
3. Which is an example of the study of physics and the human body?
A.
determining the optimum resting heart rate
B.
testing the impact of a car crash on the body
C.
calculating how to beat an existing sports record
D.
training warehouse workers on how to properly move boxes
4. The laws of motion do NOT apply to the human body.
A.
True
B.
False
PLEASE NO LINKS
Answer:
1 is A
2 is A
3 is B
4 is B
Explanation:
number three is a dead giveaway
an atom with an overall negative charge is called?
Answer:
ANION is the answer
what is the weight of a 1.8 kg computer
Answer:
17.64 Newtons
Explanation:
In order to find the weight of an object we take the mass in kilograms and multiply it by the gravitational constant (9.8), which is 1.8 * 9.8 = 17.74 Newtons.
Weight is force on the body of given mass 1.8 Kg. Weight is 17.64 N.
What is force?A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Weight of body is force due to gravity,
F = mg
F = 1.8*9.8
F = 17.64 N
Weight of the body is given as 17.64 N.
Weight is force on the body of given mass 1.8 Kg. Weight is 17.64 N.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ2
An electric fan rotates at 800rev/min.consider a point on the blade a distance of 0.16m from the axis, calculate the velocity of this point and it's centripetal acceleration
Answer:
A rotating fan completes 1200 revolutions every minute. Consider the tip of a blade, at a radius of 0.15 m.
Explanation:
The tangential velocity at the point, 0.16 m from the axis is 13.44 m/s.
We have the following information;
Angular speed of the blade = 800rev/min
Radius of the point under consideration = 0.16m
We have to convert the angular velocity to units of rad/s
Given that;
1 rev/min = 0.105 rad/s
800rev/min = 800rev/min × 0.105 rad/s/1 rev/min
= 84 rad/s
Now;
v = rω
v = Tangential velocity
r = radius
ω = angular velocity
v = 0.16m × 84 rad/s
v = 13.44 m/s
Learn more: https://brainly.com/question/14281129
microwave ovens emit microwave energy with a wavelength of 12.5 cm. what is the energy of exactly one photon of this microwave radiation?
Answer:
1.5891x10^-24
hope this helped :)
Hi I just need an answer btw it’s science not physics
Answer:
You need to divide 200 by 23 seconds in order to get your answer.
the quantity x to be determined from the equation X=P-Q.
Answer:
the correct answer will be 6.82 %that is 7%
p(1.27)-q(0.83) =x=0.44
0.02+0.01 =0.03 (maximum uncertainty)
percentage uncertainty =0.03/0.44×100 %
=6.82%
=7%
Explanation: it was d on my end
Trên bóng đèn có ghi là 12v -6w. Khi đèn sáng bình thường thì dòng điện chạy qua đèn có cường độ là
Answer:
I=P/U=6/12=0.5(A)
Explanation: P=UI ( CÔNG SUẤT = HIỆU ĐIỆN THẾ NHÂN VỚI C Đ D Đ)
Friction due to fluid is also called ___________
Friction due to fluid is also called DRAG
Answer:
Hey mate.....
Explanation:
This is ur answer....
Friction due to fluid is also called drag.
Hope it helps
Brainliest pls!
Follow me! :)
The walls of a dam are much thicker at the base than at the top
Answer:
I guess it is the reason
Explanation:
A dam is thicker at the bottom than at the top because the forces exerted are strongest close to the ground. Water pressure increases proportionally with depth, so the lower portion of the dam has greater water pressure exerted upon it. The increasing thickness of the lower dam also helps it support its own weight.
This is because of Pressure.
Pressure is directly proportional to depth and the deeper the length the high the pressure. Thus at the bottom, water pressure is very high and the walls must be made thicker to accommodate that pressure.
Why is it easier to cut meat with a sharp knife than with a blunt knife
Answer:
because the knife is sharp
Answer:
Pressure is inversely proportional to the area of the surface. While a blunt knife has more area coming in contact than a sharp knife and the pressure exerted by the blunt knife will be less as compared to that of a sharp knife. Therefore it is easier to cut with a sharp knife.
Explanation:
Hope this helps! mark as brainliest please...
A 250 g sample of water with an initial temp of 98.8 c loses 7500 joules of heat. What is the final temperature of the water?
The final temperature of the water is 106.0 °C
From the question,
We are to determine the final temperature of water.
From the formula
Q =mcΔT
Where Q is the quantity of heat
m is the mass of substance
c is the specific heat capacity of substance
and ΔT is the change in temperature
Also,
ΔT = T₂ - T₁
Where T₂ is the final temperature
and T₁ is the initial temperature
Then, the formula can be written as
Q =mc(T₂ - T₁)
From the question
Q = 7500 J
m = 250 g
T₁ = 98.8 °C
Putting the parameters into the formula, we get
7500 = 250 × 4.184 (T₂ - 98.8)
(NOTE: specific heat capacity of water, c,= 4.184 J/g °C)
7500 = 1046 (T₂ - 98.8)
7500 = 1046T₂ - 103344.8
Then,
1046T₂ = 7500 + 103344.8
1046T₂ = 110844.8
∴ T₂ = 110844.8 ÷ 1046
T₂ = 105.9701 °C
T₂ ≅ 106.0 °C
Hence, the final temperature of the water is 106.0 °C.
Learn more here: https://brainly.com/question/13439286