Answer:
Needle and Scale Leaves. This kind of leaves are mostly found in 'evergreen' trees. ...
Lanceolate Leaf. ...
Oblong Leaf. ...
Linear Leaves. ...
Cordate Leaves.
Explanation:
Answer:
Broad
Flat Leaves.
Needle and Scale Leaves.
Oblong Leaf.
Cordate Leaves.
Explanation:
Michelle is trying to find the average atomic mass of a sample of an unknown
element. She finds that her sample contains 59.34% of an isotope with a mass of
113.6459, while the rest of the sample is an isotope with a mass of 115.8488. What
is the average atomic mass of her sample? Please round your answer to 0.01 amu.
The average atomic mass of her sample is 114.54 amu
Let the 1st isotope be A
Let the 2nd isotope be B
From the question given above, the following data were obtained:
Abundance of isotope A (A%) = 59.34% Mass of isotope A = 113.6459 amuMass of isotope B = 115.8488 amuAbundance of isotope B (B%) = 100 – 59.34 = 40.66%Average atomic mass =?The average atomic mass of the sample can be obtained as follow:
[tex]Average \: atomic \: mass \: = \frac{mass \: of \: A \times A\%}{100} + \frac{mass \: of \: B \times B\%}{100} \\ \\ Average \: atomic \: mass \: = \frac{113.6459\times 59.34}{100} + \frac{115.8488\times 40.66}{100} \\ \\ Average \: atomic \: mass \: = 114.54 \: amu \\ \\ [/tex]
Thus, the average atomic mass of the sample is 114.54 amu
Learn more about isotope: https://brainly.com/question/25868336
pa help po science po
Answer:
1. molecule, cell, tissue, organ, organ system, organism, population, community, ecosystem, biosphere
2. A
3. D
4. C
5. C
6. C
7. C
8. B
9. Sorry I don't know :(
10. B
11. A
12. C
13. Sorry :((
14. C
15. a
16. d
Sorry I don't know the rest.. I hope this helps though!!
Which best explains why a person can tell the difference between a whisper and a yell?
O Sound waves turn into chemical signals that indicate certain sounds.
Different vibrations in the ear cause the bras o interpret different sounds.
The fluid in the cochlea picks up electrical signals for the intensity of sound.
The eyes see what is making the noise and help the brain process the sound.
Answer:
The difference is the louder the sound the bigger the waves and your ears collect the sound waves and brings it to you brain
Explanation:
Answer:
Hey! The correct answer is D.) Different vibrations in the ear cause the brain to interpret different sounds.
Explanation:
I got a low score on the test but yeah I got that one correct so It's D
Heart, 5 stars, and Brainiest to first right answer!
Which two types of air masses would likely form a subtropical jet stream?
Warm and cool air masses meeting near the North Pole
Cool and warm air masses meeting near the equator
Multiple warm air masses meeting near the equator
Two or more cool air masses meeting near the South Pole
Answer:
Give person above me brainliest
Explanation:
Why do nonmetal atoms share electrons in covalent bonds
Answer:
pairs of electrons
Explanation:
covalent bondin occurs when pairs of electrons are shared by atoms.... nonmetal will readily form covalent bonds with other nonmetal in order to obtain stability.
A bottle rocket takes off with a speed of 13 m/s and is angled 55 degrees above the horizon. What is the Y component of the velocity ?
Answer:
10.53m/s
Explanation:
Initial velocity: 13m/s
Angle of projection: 55deg
Y-component of velocity is given as usin⌀
Plugging in, we get
= 13 * sin(55deg)
= 13 * 0.81
= 10.53
⇒ 10.53m/s
What is the balanced form of the chemical equation shown below?
N2(g) + H2(9) ► NH3(9)
O A. N2(9) + H2(9) ► NH3(9)
B. N2(9) + H2(g) → 2NH3(9)
)
O C. N2(g) + 3H2(g) → 2NH3(9)
O 9
D. N2(9) + H2(g) → 2NH(9)
Answer:
C
Explanation:
2 N on left so we put a 2 on the right which makes 6 H so we need 6H on the left to do that we add a coef. of 3 to make 6 H and balance the equation
A quantity of HCL ( 1.5*10⁻³ M) is added to water at 25°C to increase the hydrogen ion concentration from 1*10⁻⁷ to 1.5* 10⁻³ moles per liter. What is the new hydroxyl ion concentration?
A sample of N2O gas has a density of 2.95 g/L at 298 K. What must be the pressure of the gas?
[tex]\huge{\underline{\underline{\boxed{\sf{\purple{ǫᴜᴇsᴛɪᴏɴ}}}}}}[/tex]
A sample of N2O gas has a density of 2.95 g/L at 298 K. What must be the pressure of the gas?[tex]\huge\fcolorbox{aqua}{lime}{Answer}[/tex]
P = 1203 mm Hg[tex]\huge{\underline{\underline{\boxed{\sf{\purple{Explanation}}}}}}[/tex]
#Given: -p = 2.85 g/LT = 298 K# Solution :-According to ideal gas equation -
➡PV = nRT
➡PV = (W/M)RT
➡PM = (W/V)RT
➡PM = PRT
➡P = pRT/M
➡P = 2.85 × 0.082 x 298 / 44
➡P = 1.583 atm
➡P = 1.583 × 760
➡P = 1203 mm Hg
Therefore, pressure of the gas. must be1203 mm of Hg.Hope this helps you:)
Heart, 5 stars, and Brainiest to first right answer!
In an experiment, equal amounts of water and sand were heated under a lamp. The initial and final temperatures of each were recorded. A partial record of the temperature is shown.
Experimental RecordSubstance Initial Temperature Final Temperature
Sand 20 °C 26 °C
Water 20 °C ?
Which statement about the final temperature of water is correct?
A. It will be less than 26 °C as sand has a relatively higher specific heat than water.
B. It will be less than 26 °C as water has a relatively higher specific heat than sand.
C. It will be more than 26 °C as sand needs relatively higher energy than water to raise its temperature.
D. It will be more than 26 °C as water needs relatively higher energy than sand to raise its temperature.
hi have a nice day
will be less than 26 °C as water has a relatively higher specific heat than sand.
Explanation:
The specific heat of a substance is the amount of heat energy absorbed by one unit of mass of the substance when its temperature increases one unit.
From that, you can derive the equation for the specific heat of a substance:
specific heat = heat / (mass × ΔT)
Thus, assuming that all the heat provided by the lamp to both samples is the same and, as given, the amount (mass) of both samples is also the same, you have that the specific heat of the samples will be:
specific heat = constant / ΔT
So, specific heat and ΔT are inversely related.
It is known that water has a higher specific heat than sand (that is why the sand on the shore of a beach is, during the day, hotter than the water and your feet get burned when you walk on a sandy beach on a sunny day
Triple covalent bond can be formed between:
a)C&H
b) N&S
c) C & S
d) C&O
e) O & S
How much heat must be added to a 8.21 g sample of gold to increase its temperature from the tempe
75.3°C to 83.1°C? The specific heat of gold is 0.13 J/gºC
Answer:
Q= ms∆T
Where, m is mass of substance
S is specific heat
∆T is temperature change
As in question , m=8.21 ,s=0.13 ,∆T =6.2
So, Q = 8.21×0.13×6.2=6.61 J
pls ansswerrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
Answer: Its C, c is a solid state
the answer :
Hi there !
The answer is "C"
; due to the intermolecular forces of attraction
Oxygen-15 decays through the release of a beta particle. Draw what the nucleus would look like after a beta particle is emitted. What element does it become?
When oxygen -15 nucleus undergoes beta emission, it is transformed into Fluorine - 15 nucleus.
Beta decay is said to occur when a neutron is converted to a proton. This process leads to the emission of en electron. The neutron - proton ratio decreases and the atomic number of the daughter nucleus is greater than that of the parent nucleus by one unit.
Hence, when oxygen -15 nucleus undergoes beta emission, it is transformed into Fluorine 15 nucleus.
Learn more about beta decay: https://brainly.com/question/25455333
Pure substances can be classified into element and compound. Choose the
CORRECT pair(s).
I Diamond - element
II Salt - compound
III Sugar solution - element
I and Il only
I only
II and III only
III and III
The discrepancy between results given by the van der Waals equation and the ideal gas law will increase as:
This question is recalling the behavior of real gases in contrast to ideal gases, defined by the van der Waals equation and the ideal gas law respectively, and a reason behind the increasing discrepancy is required.
In such a way, we can start by considering the attached picture in which the choices are shown and clearly, the answer is "as the polarity of the molecules increase".
The aforementioned can be explained with the concept of intermolecular forces, because ideal gas theory states that ideal gas molecules do not interact one to another, and, as the polarity of the molecules increase, these intermolecular forces increase their frequency and strength, and will lead to the formation of associations, which fail to be numerically modelled by simple equations of state such as van der Waals, Redlich-Kwong, Peng-Robinson, etc,.
These associations are, of course, thoroughly neglected by the ideal gas law whereas the ones included in the van der Waals equation, which are not the most reliable, merely attempt to approach this phenomenon, which cause the mentioned discrepancy. As an additional data, robust equations of state, such as CPA (cubic plus association) are able to provide reliable results when working with highly polar gases but turn out really tough to work with due to its mathematical complexity.
Learn more:
https://brainly.com/question/13423552https://brainly.com/question/13201335Answer choices are A. Constant speed
B. Stopped
C.Moving sideways
D.Accelerating
Which of the following could be classified as unleavened bread?
sourdough bread
muffins
tortilla
bagels
Answer:
Tortilla
Explanation:
Answer:
tortilla
Explanation:
How many species are known to be living on Earth?
Answer:
8.7 million species
Explanation:
Scientists have estimated that there are around 8.7 million species of plants and animals in existence.
what happens when you combine hydroxide, chlorine, and 2 drops of h2o
Answer:
Chlorine will react in water to form hypochlorous acid, which can then dissociate into hydrogen and hypochlorite ions, according to Eqn (1). This reaction is very important, as the disinfecting power of HOCl, hypochlorous acid, is about 40–80 times that of OCl−, hypochlorite.Explanation:
CARRY ON LEARNINGAND REMEMBER DO ALWAYS READ AND WRITE
Which are the two key factors that affect the rate of weathering of rocks?
Select 2.
A Climate
B Rock Type
C Bedrock
Answer:
A and B.
Explanation:
Climate:
High temperatures and greater rainfall increase the rate of chemical weathering. Lower temperatures can break rocks to by freezing water inside of a rock cracks. When it freezes it expands the water and forces the crack of the rock to expand.
Rock Type:
Certain types of rock are very resistant to weathering. Igneous rocks, especially intrusive igneous rocks such as granite, weather slowly because it is hard for water to penetrate them. Other types of rock, such as limestone, are easily weathered because they dissolve in weak acids.
does the following atomic model of a chemical reaction correctly demonstrate the law of conversation of matter why or why not
plzzz help
Answer:
Yes
Explanation:
You can tell because there are 2 moles of H2 on the reactants side and 1 mole of O2, and on the products side we see the same amount, meaning that no moles of H2 or O2 were added or destroyed, meaning that it follows the law of conservation of matter.
which type of element pairs can form ionic bonds
Answer:
Between metal and nonmetal ion's
Explanation:
for example, sodium (Na),a metal and a chloride (Ci
WHICH ONE?????????????????? Brainlest
Answer:
I believe it would be C, The number of atoms in the reactants is equal to the number of atoms composing the products
Explanation:
hope this helps! :D
have a miraculous day!! <3
Answer:
The number of atoms in the reactants is equal to the number of atoms composing the products
if one gram of sulphur dioxide contains x molecules what will be the number of molecules in 1g of methane
The ratio of molecules in sulphur dioxide and methane will be the same as the ratio of their moles. So, first of all we should find out the number of moles of sulphur dioxide in 1 gram of sulphur dioxide in 1 gram of sulphur dioxide, and the number of moles of methane in 1 gram of methane. This can be done as follows :
(i) The molecular formula of sulphur dioxide is [tex]SO_{2}[/tex]
So, [tex]1[/tex] mole of [tex]SO_{2}[/tex] = [tex]Mass[/tex] [tex]of[/tex] [tex]2'O'[/tex]
[tex]=32+2*16[/tex]
[tex]= 64[/tex] grams
Now, [tex]64g[/tex] of sulphur dioxide [tex]= 1[/tex] mole
So, [tex]1g[/tex] of sulphur dioxide = [tex]\frac{1}{64}[/tex] mole
Thus, we have [tex]\frac{1}{64}[/tex] mole of sulphur dioxide and it contains molecules in it. Now, since equal moles of all the substance contain equal number of molecules, therefore, [tex]\frac{1}{64}[/tex] mole of methane will also contain x molecules of methane.
(ii) Molecular formula of methan is [tex]CH_{4}[/tex]
So, 1 mole of [tex]CH_{4}[/tex] = Mass of C + Mass of 4 H
[tex]=12+4*12[/tex]
Now, 16g of methane = 1 mole
So, 1 g of mathane = [tex]\frac{1}{16}[/tex] mole
We know that:
[tex]\frac{1}{64}[/tex] mole of methane contains = x molecules
So, [tex]\frac{1}{16}[/tex] mole of contains will contain =[tex]\frac{x*64}{16}[/tex] molecules
=[tex]4x[/tex] molecules
It takes 60 mL of 0.20 M of sodium hydroxide (NaOH) to neutralize 25 mL of carbonic acid (H2CO3) for the following chemical reaction:
2 NaOH + H2CO3 → N2CO3 + 2 NaOH
The concentration of the carbonic acid is _____.
A) 0.48m
B) 0.10m
C) 0.96m
d)0.24m
If It takes 60mL of 0.20M of sodium hydroxide (NaOH) to neutralize 25 mL of carbonic acid ([tex]H_2CO_3[/tex]), then the concentration of the carbonic acid is 0.24M
The reaction between NaOH solution and [tex]H_2CO_3[/tex] is written below
[tex]2NaOH + H_2CO_3 \rightarrow Na_2CO_3 + 2H_2O[/tex]
Volume of NaOH, [tex]V_B[/tex] = 60 ml
Volume of [tex]H_2CO_3[/tex], [tex]V_A=25 ml[/tex]
Molarity of [tex]H_2CO_3[/tex], [tex]C_A=?[/tex]
Molarity of NaOH, [tex]C_B=0.20M[/tex]
Number of moles of [tex]H_2CO_3[/tex], [tex]n_A=1[/tex]
Number of moles of NaOH, [tex]n_B=2[/tex]
The mathematical equation for neutralization reaction is:
[tex]\frac{C_AV_A}{C_BV_B} =\frac{n_A}{n_B}[/tex]
Substitute [tex]C_B=0.2 M[/tex], [tex]n_A=1[/tex], [tex]n_B=2[/tex], [tex]V_B[/tex] = 60ml, and [tex]V_A=25 ml[/tex] into the equation above in order to solve for [tex]C_A[/tex]
[tex]\frac{C_A \times 25}{0.2 \times 60}=\frac{1}{2} \\\\50C_A=12\\\\C_B=\frac{12}{50} \\\\C_B=0.24M[/tex]
Therefore, the concentration of the carbonic acid is 0.24M
Learn more here: https://brainly.com/question/25943090
What quantity of energy is required to heat a piece of iron wighing 1.31 g from 25.0 degrees celsius to 46.0 degrees celsius
The quantity of energy required to heat a piece of iron weighing 1.31 g from 25.0 degrees Celsius to 46.0 degrees Celsius is 2.93 calories.
What is energy?The ability or power to perform tasks, such as the ability to move an object (having a certain mass) by exerting force.
Energy can exist in many forms, including electrical, mechanical, chemical, thermal, and nuclear, and it can also change its form.
The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine the amount of heat acquired or lost by a sample (q).
Q = mcΔT
Q = 1.31 g x 449 x 21° C = 12.26 joule
12.26 /1 x 1 cal / 4.189= 2.93 calories
Therefore, the quantity of energy required to heat a piece of iron is 2.93 cal.
To learn more about energy, refer to the link:
https://brainly.com/question/22920370
#SPJ2
Calculate the wavelength of X-rays of frequency 5.00 x 100 Hz (Hz=Hertz=cycles/sec).
a) 1.20 nm
b) 0.398 nm
C) 0.600 m
d) 1.20 m
e) 0.600 nm
Answer:
no correct answer please mention other answers.
wavelength=30000000/frequency
Can I get some help
Answer:
I'm afraid not, the image is too blurry
yesss☺️
sorryyyyyy
sorryyyyy
I figured it out no problem
Answer:
good job ;0
Explanation: