what are the best displays for bivariate categorical data

The arc length is D) 3.14 meters.

What is arc length?

In mathematics, an arc is a portion of a curve that can be thought of as a segment of the curve. An arc is a connected set of points on a curve, usually a portion of a circle.

It is defined by two endpoints and all the points along the curve between them. The length of an arc is the distance along the curve between its two endpoints.

The distance along the curved line that forms the arc (a section of a circle) is measured using the arc length formula.

                                      [tex]A_L=\frac{\theta}{360\textdegree}2\pi r[/tex]

Here the give circle Radius PR = 3m and θ=60°.

Now using arc length formula then,

=> Arc length [tex]A_L=\frac{\theta}{360\textdegree}2\pi r[/tex]

=> [tex]A_L=\frac{60}{360} \times2\times3.14\times3[/tex]

=> [tex]A_L=\frac{1}{6}\times2\times3.14\times3[/tex]

=> [tex]A_L[/tex] = 3.14 m.

Hence the arc length is D) 3.14 meters.

Learn more about Arc length at

https://brainly.com/question/28108430

#SPJ1

The typical number of points from the histogram for scored in 2008 is 11 points.

The typical number of points from the histogram for scored in 2016 is 9 points

A histogram is described as an approximate representation of the distribution of numerical data.

We take note of the following pints while determining the number of points:

Learn more about histogram at:

brainly.com/question/14421716

#SPJ1

If the trapezium "ABCD" have "AD || BC", AD as 24 cm, BC as 10, then the measure of the angle CDA will be 32.27°.

A "Trapezium" is defined as a polygon with "four-sides", where one pair of opposite sides are parallel and the other pair of opposite sides are non-parallel.

Let point "M" be on AD, So, Height = 6 cm ⇒ BM = 6 cm,

We Apply Pythagoras-Theorem in Triangle AMB,

So, AM² = AB² - BM²

⇒ AM² = (7.5)²- (6)²,

⇒ AM  = 4.5,

Let "N" be a point on "AD", such that "CN ⊥ AD",

So, the base AD will be =  AM +  MN + ND,

MN = BC = 10 and CN = BM = 6 (height)

⇒ 24 = 4.5 + 10 + ND,

⇒ ND = 9.5

In triangle-CDN, Tan(∠CDN) = CN/ND,

From the figure , we see that, ∠CDN = ∠CDA,

So, Tan(∠CDA) = 6/9.5,

⇒ ∠CDA =  32.27°.

Therefore, the measure of the angle CDA is 32.27°.

Learn more about Trapezium here

https://brainly.com/question/20210325

#SPJ4

The given question is incomplete, the complete question is

ABCD is a trapezium. In which AD || BC, AD = 24 cm  BC = 10, AB = 7.5 and Height = 6 cm.

Find out the size of angle CDA.

The correct vocab in written as;

DC = semi-circle

<ECD = minor arc

<ECF = point of tangency

CF = chord

To determine the corresponding terms, we need to take note of the following definitions;

Learn about circles at: https://brainly.com/question/24375372

#SPJ1

Answer: b

Step-by-step explanation:

I didnt get it  but thats the correct answer when i guessed on it

Answer:

The answer is the skin est one there

Step-by-step explanation:

I got the question wrong so I don't know how but this is the correct one

Thus, the value of the  x- and y-intercepts for the given linear equation is (-30, 0) and (0, 15)

A nonlinear function's intercepts can be defined algebraically or graphically. The points on a graph where a nonlinear function crosses both x and y axes are known as the intercepts.

Given that-

linear equation:  -x + 2y = 30

x-intercept: It occurs when y = 0,

-x + 2(0) = 30

-x = 30

x = -30

y-intercept: It occurs when x = 0,

-0 + 2y = 30

2y = 30

y = 15

Thus, the value of the  x- and y-intercepts for the given linear equation is (-30, 0) and (0, 15).

know more about the x- and y-intercepts

https://brainly.com/question/24363347

#SPJ1

System developers can initiate a formal project as early as the preliminary investigation stage, or later on, as analysis, design, and implementation activities occur. True.

System developers can initiate a formal project as early as the preliminary investigation stage or at any point in the analysis, design, and implementation activities.

The decision to initiate a formal project depends on various factors, including the scope of the project, the availability of resources, the complexity of the system, and the stakeholders' needs and requirements. A formal project may involve a team of developers, analysts, and other experts who work collaboratively to design and implement a system that meets the stakeholders' requirements and objectives.

learn more about stakeholders'

https://brainly.com/question/30463383

#SPJ4

True. System developers can initiate a formal project as early as the preliminary investigation stage or later on as

analysis, design, and implementation activities occur.

The initiation stage is when the need for a new system is identified, and preliminary investigations are conducted to

determine the feasibility of the project.

If the project is deemed feasible, the formal project can be initiated at this stage.

However, if the project is initiated later on, the analysis, design, and implementation activities will have already begun.

System developers can initiate a formal project as early as the preliminary investigation stage or later on as

analysis, design, and implementation activities occur. therefore, the given statement is true.

for such more question on  investigation stage

https://brainly.com/question/14682150

#SPJ11

The volume of  the solid is 761.97 in².

The mistake the student made is that the student did not subtract the square of the radius of the inner hollow cylinder  from the square of the radius of the main cylinder.

The volume of the solid can be found by adding the volume of hollow cylinder and the volume of the cone. That is:

Volume of solid = volume of hollow cylinder + volume of the cone

Volume of solid = π(R²-r²)H + 1/3πR²h

where R = 8/2 = 4 in, r = 2 in, H = 18 in and h = 5 in

Volume of solid = [3.14 * (4²-2²) * 18] + [1/3 * 3.14 * 4² * 5]

Volume of solid = 678.24 + 83.73

Volume of solid = 761.97 in²

The mistake the student made is that the student did not subtract the square of the radius of the inner hollow cylinder  from the square of the radius of the main cylinder.

Learn more about volume on:

https://brainly.com/question/463363

#SPJ1

The proportion (p) of adults who received a parking ticket in the last year is 0.1 or 10%.

The standard error for the proportion (P hat) is given as 0.015, which provides a measure of the precision of our estimate.

To find the proportion (p) of adults who received a parking ticket in the last year, we will use the information provided in the survey.
Determine the number of adults who received a parking ticket (given as 40).
Determine the total number of adults surveyed (given as 400).
Now, calculate the proportion (p) using the formula:
p = (number of adults with parking tickets) / (total number of adults surveyed)
p = 40 / 400
p = 0.1

For similar question on proportion.

https://brainly.com/question/30434612

#SPJ11

In linear equation, Roger and Trish can finish 11x/30 of the homework if they work together for x hours.

What is a linear equation in mathematics?

A linear equation in algebra is one that only contains a constant and a first-order (direct) element, such as y = mx b, where m is the pitch and b is the y-intercept.

                         Sometimes the following is referred to as a "direct equation of two variables," where y and x are the variables. Direct equations are those in which all of the variables are powers of one. In one example with just one variable, layoff b = 0, where a and b are real numbers and x is the variable, is used.

In one hour, Roger can finish 1/6 of the work, and Trish can finish 1/5 of the work. So, working together for one hour, they can finish:

(1/6) + (1/5)

= (5/30) + (6/30)

= 11/30 of the work.

If they work together for x hours, then they will finish:

x × (11/30) = 11x/30

of the work in x hours.

Therefore, Roger and Trish can finish 11x/30 of the homework if they work together for x hours.

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

The standard form of the polynomial 2m-3m²+4m⁵+21 is 4m⁵ - 3m² + 2m + 21.

The standard form of a polynomial is when the polynomial is written with the terms in descending order of degree, with each term having a coefficient and an exponent. To convert the given polynomial 2m-3m²+4m⁵+21 to standard form, we need to rearrange the terms in descending order of degree.

The degree of a term is the exponent of the variable in that term. For example, the degree of the term 4m⁵ is 5, and the degree of the term -3m² is 2.

So, we start by arranging the terms in descending order of degree:

4m⁵ - 3m² + 2m + 21

Next, we can simplify the coefficients of each term if possible. In this case, all of the coefficients are already simplified, so we leave them as they are.

In summary, to convert a polynomial to standard form, we arrange the terms in descending order of degree and simplify the coefficients of each term if possible. This makes it easier to compare and manipulate polynomials, and is often required when solving equations or finding roots of polynomials.

To learn more about polynomial click on,

https://brainly.com/question/18275243

#SPJ1

Answer: Since we don't have the actual table, we can't provide an exact answer. However, we can explain the general method for solving this type of problem.

Let's say that Julie rented three types of bicycles: type A, type B, and type C. Let's also say that she rented a certain number of each type, and received a certain amount of money from each type. We can set up the following equations based on this information:

Cost to rent type A bike = (Amount received for type A rentals) / (Number of type A bikes rented)

Cost to rent type B bike = (Amount received for type B rentals) / (Number of type B bikes rented)

Cost to rent type C bike = (Amount received for type C rentals) / (Number of type C bikes rented)

We can then solve for each cost by plugging in the given numbers from the table. For example, if the table shows that Julie rented 10 type A bikes and received $200 in rental fees, we would have:

Cost to rent type A bike = $200 / 10 = $20

We can do this for each type of bike to find the cost to rent each kind of bicycle.

It's worth noting that the actual equations may look slightly different depending on the specific information provided in the table. For example, if the table gives the total number of bikes rented and the total amount received, we would need to use slightly different equations to solve for the individual costs.

Answer:

31.97⁰ to the nearest hundredth.

Step-by-step explanation:

sin x = opposite side / hypotenuse

        = 9/17

x = 31.9657

The estimate of the annual snowfall in 78th year is 29.88 inches. The Option C.

Using the given information, we can use the linear equation y = mx + b, where y represents the annual snowfall and x represents the number of years since 1920.

The initial measurement in 1920 was 48.6 inches, so b = 48.6.

The decrease in annual snowfall is 0.24 inches per year, so m = -0.24.

The equation is y = -0.24x + 48.6.

We will plug in x = 78 into the equation and solve for y:

y = -0.24(78) + 48.6

y = -18.72 + 48.6

y = 29.88.

Read more about estimate

brainly.com/question/28416295

#SPJ4

The percentage increase of Seraphina's speed would be = 12.3%

The speed she travelled in the first hour = 57miles/hr

The speed she travelled in the second hour = 73miles/jr

The increase in speed = 73-57 = 16

Therefore the percentage increase;

= 16/130×100/1

= 1600/130

= 12.3%

Learn more about percentage here:

https://brainly.com/question/24339661

#SPJ1

The ladder should she placed 12 feet from the base of her house

From the question, we have the following parameters that can be used in our computation:

Using the above as a guide, we have the following:

We make use of the pythagoras theorem to calculate how far the ladder should be placed

Represent this with x

So we have

x^2 = 20^2 - 16^2

Evaluate

x^2 = 144

So, we have

x = 12

Hence. the ladder should she placed 12 feet from the base of her house

Read more about pythagoras theorem at

https://brainly.com/question/654982

$SPJ1

In this scenario, the researcher is interested in comparing the effectiveness of three different doses of a new medication in treating panic attacks. To analyze the data, the researcher can use a hypothesis testing technique called analysis of variance (ANOVA).

ANOVA is a statistical technique used to compare the means of three or more groups to determine if there are significant differences between them. In this case, the means being compared are the number of panic attacks experienced by each group after 30 days on the medication.

The null hypothesis in this study would be that there is no significant difference in the mean number of panic attacks between the three dosage groups, and the alternative hypothesis would be that there is a significant difference in the mean number of panic attacks between at least two of the dosage groups.

The researcher can use a one-way ANOVA test to analyze the data, which will calculate the F-statistic and associated p-value. If the p-value is less than the chosen significance level (usually 0.05), the researcher can reject the null hypothesis and conclude that there is a significant difference in the mean number of panic attacks between at least two of the dosage groups.

If a significant difference is found, post-hoc tests such as Tukey's HSD can be used to determine which specific groups have significantly different means.

Learn more about ANOVA

https://brainly.com/question/23638404

#SPJ4

The area, in square inches, of the composite figure is: 112.125 square inches.

To obtain the area in square inches of the composite figure, we can start by calculating the area of the rectangle to be

= length x width = 14 x 2

= 28 square inches

The leg length of 25 will be divided by 2 to give 12.5. Next we find the area of the isosceles right triangle as follows:

= (leg length)^2 / 2 = (12.5)^2 / 2 = 78.125 square inches.

The combined area = Area of rectangle + Area of isosceles right triangle

= 28 + 78.125

= 106.125 square inches

So, the area of isosceles triangle = (base x height) / 2

= (4 x 3) / 2

= 6 square inches

Now we can add up the areas of the individual shapes to find the total area of the composite figure:

Total area = Combined area + Area of isosceles triangle

= 106.125 + 6

= 112.125 square inches

Complete Question:

Find the area, in square inches, of the composite figure. A composite figure consisting of an isosceles right triangle, a rectangle, and an another isosceles triangle. The combined length of the right triangle and the rectangle is 25 inches. The length of only the rectangle is 14 inches. The base of the other isosceles triangle, which is the same as the width of the rectangle, is 2 inches plus 2 inches, and the height of the isosceles triangle is 3 inches

Learn more about composite figures here:

https://brainly.com/question/21135654

#SPJ1

The matrix A or the linear transformation it represents to determine whether the transformation is onto or not.

We cannot determine whether the linear transformation given by matrix A is onto based solely on the information provided about the matrix A.

Recall that a linear transformation is onto if and only if its range is equal to its codomain.

In other words, for every vector b in the codomain, there exists at least one vector x in the domain such that [tex]T(x) = b[/tex], where T is the linear transformation.

If A is a matrix representing a linear transformation from[tex]R^2[/tex] to[tex]R^3[/tex], then the codomain is[tex]R^3[/tex], and the range of the transformation is a subspace of [tex]R^3[/tex].

If the matrix A is 1-to-1, then its nullspace only contains the zero vector. This implies that the columns of A are linearly independent, which means that the column space of A has dimension 2.

The range of the transformation has dimension at most 2.

The codomain has dimension 3, it is possible for the range to be a proper subspace of the codomain, in which case the transformation would not be onto.

For similar questions on matrix

https://brainly.com/question/2456804

#SPJ11

Answer:

10

20,00/2000=10

Step-by-step explanation:

Hope this helps! =D
Mark me brainliest! =D

Answer: 10 tons.

Step-by-step explanation: There are 2000 pounds in one ton. Hence:

20000 lb ÷ 2000 lb/ton = 10 tons

The probability that the secretary will receive 6 calls next hour is approximately 0.090 or 9.0%.

The Poisson distribution is a probability distribution that describes the number of events occurring in a fixed time interval, given the average rate at which events occur and the independence of events. In this case, the average rate of calls is 3 calls per hour.

The probability of receiving exactly 6 calls next hour can be calculated using the Poisson probability formula:

[tex]P(X = 6) = (e^(-λ) * λ^6) / 6![/tex]

where λ is the average rate of calls, e is the base of the natural logarithm, and 6! is the factorial of 6.

Substituting the values, we get:

[tex]P(X = 6) = (e^(-3) * 3^6) / 6! ≈ 0.090[/tex]

Therefore, the probability that the secretary will receive 6 calls next hour is approximately 0.090 or 9.0%.l

Learn more about the probability

https://brainly.com/question/30034780

#SPJ4

The probability that the secretary will receive 6 calls next hour is approximately 0.0504, or 5.04%

To calculate the probability that the secretary will receive 6 calls next hour, given that the average is 3 calls per hour

and the Poisson distribution applies, follow these steps:

Identify the given information: λ (average calls per hour) = 3, k (number of calls to calculate the probability for) = 6.

Use the Poisson probability formula:

P(k) =[tex](e^{(-\lambda)} \times\lambda^k) / k!,[/tex]

where P(k) is the probability of k calls,

e is the base of the natural logarithm (approximately 2.71828),

λ is the average rate (3 calls per hour), and

k! is the factorial of k (6 in this case).

Calculate [tex]e^{(-\lambda)}: e^{(-3)} = 0.04979.[/tex]

Calculate [tex]\lambda^k: 3^6 = 729.[/tex]

Calculate k!: 6! = 6 × 5 × 4 × 3 × 2 × 1 = 720.

Substitute these values into the formula: P(6) = (0.04979 × 729) / 720 ≈ 0.0504.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

The area of a triangle is equal to half the product of the triangle's base and height. The triangular box has a height of 6 inches.

The area of a right-angle triangle is half of the product of the triangle's base and height.

Area of triangle = [tex]\frac{1}{2} * base * height[/tex]

As stated previously, the lengths of the triangle's altitude and base are 3.5 inches and 5.2 inches, respectively. As a result, the volume of the triangular box is 54.6 cubic inches, and the height of the box must be determined in inches.

The volume of the triangular box =

[tex](\frac{1}{2} * base *height) * Height\\54.6 = (\frac{1}{2} * 5.2 * 3.5) * Height\\Height = \frac{54.6}{2.6 * 3.5} \\Height = 6 inches[/tex]

Therefore the height of the box of sticky notes is 6 inches.

Learn more about volume here:

https://brainly.com/question/1578538

#SPJ1

Answer:

y=1/2x+4

Step-by-step explanation:

The point of intersection is 4, and it goes up one, right 2 so the rise over run is 1/2

For the given data, The correct statement is: A refrigerator with 3.75 ft³ of refrigerator space will have 1.5 ft³ of freezer space.

We can compute the refrigerator space ratio for each model by dividing the refrigerator space by the freezer space:

[tex]\text{For Model A: Space ratio = Refrigerator space / Freezer space} = 15.75 \;ft^3 / 6.3 ft^3 \approx 2.5[/tex]

[tex]\text{For Model B: Space ratio = Refrigerator space / Freezer space }= 10.25 ft^3 / 4.1 ft^3\approx 2.5\\\\\text{For Model C: Space ratio = Refrigerator space / Freezer space }= 15.25 ft^3 / 6.1 ft^3 \approx 2.5[/tex]

We can use this ratio to compute the freezer space for a particular refrigerator with a known refrigerator space because all refrigerators have the same space ratio of around 2.5.

Now for given statements:

Using the space ratio of 2.5, if a refrigerator has 3.25 ft³ of refrigerator space, the freezer space will be= [tex]3.25 ft^3 / 2.5 \approx 1.3 ft^3[/tex], not 1.2 ft³. So, statement a is not true.

Using the space ratio of 2.5, if a refrigerator has 3.25 ft³ of refrigerator space, the freezer space will be [tex]3.25 ft^3 / 2.5 \approx 1.3 ft^3[/tex], not 1.5 ft³. So, statement b is not true.

Using the space ratio of 2.5, if a refrigerator has 3.75 ft³ of refrigerator space, the freezer space will be [tex]3.75 ft^3 / 2.5 \approx 1.5 ft^3[/tex], not 1.2 ft³. So, statement c is not true.

Using the space ratio of 2.5, if a refrigerator has 3.75 ft³ of refrigerator space, the freezer space wii be[tex]3.75 ft^3/ 2.5 \approx 1.5 ft^3[/tex] So, statement d is true.

Learn more about space ratio here:

https://brainly.com/question/25668244

#SPJ1

The null hypothesis represents the default assumption or the status quo, while the alternative hypothesis represents the alternative possibility or the hypothesis that is being tested.

These two hypotheses are mutually exclusive, meaning that if one is true, the other must be false.

The null and alternative hypotheses divide all possibilities into two non-overlapping sets.

In statistical hypothesis testing, the null and alternative hypotheses divide all possibilities into two non-overlapping sets.

These two hypotheses represent different explanations or theories about the data, and they are used to make inferences about the population from the sample data.

The null hypothesis represents the default assumption or the status quo. It states that there is no significant difference or relationship between two variables, or that the observed data is due to random chance alone. The alternative hypothesis, on the other hand, represents an alternative explanation or theory about the data.

It states that there is a significant difference or relationship between two variables, or that the observed data is not due to random chance alone.

The null and alternative hypotheses are mutually exclusive, meaning that if one hypothesis is true, the other hypothesis must be false.

They are also exhaustive, meaning that they cover all possible explanations for the observed data.

By dividing all possibilities into two non-overlapping sets, the null and alternative hypotheses allow us to make a decision about which hypothesis is more likely to be true based on the evidence provided by the sample data.

In order to test the null and alternative hypotheses, we use statistical methods to calculate the probability of obtaining the observed data if the null hypothesis were true.

This probability is called the p-value, and it represents the likelihood of obtaining the observed data or a more extreme result if there were no true effect or relationship in the population.

If the p-value is small enough, we reject the null hypothesis in favor of the alternative hypothesis.

The null and alternative hypotheses divide all possibilities into two non-overlapping sets and provide a framework for making inferences about the population based on sample data.

By testing the null hypothesis and calculating the p-value, we can make decisions about which hypothesis is more likely to be true based on the evidence provided by the sample data.

In statistical hypothesis testing, we use evidence from the data to decide whether to reject the null hypothesis in favor of the alternative hypothesis or not.

For similar questions on null hypothesis

https://brainly.com/question/4436370

#SPJ11

Given statement "3-2 Roof area can be broken down into three basic shapes: rectangle, triangle, and trapezoid"

Given statement is True.
Because: When calculating the roof area, we can generally break it down into three basic shapes:

The term "roof area" typically refers to the total surface area of a roof. This can be calculated by measuring the length and width of each section of the roof, and multiplying those measurements together to get the area of each section.

Then, the areas of all the sections can be added together to get the total roof area.

It's important to accurately measure the roof area when planning for construction or repairs, as it will affect the amount of materials needed and the cost of the project.

Roof area can also be used to calculate the amount of insulation needed or to estimate the potential energy savings of installing solar panels.

Rectangle:

A four-sided polygon with opposite sides parallel and equal in length.
Triangle:

A three-sided polygon with three vertices and three angles.
Trapezoid:

A four-sided polygon with one pair of parallel sides.
By dividing a roof's surface into these shapes, you can calculate the total area more easily.

Hence statement is True.

For similar question on rectangle.

https://brainly.com/question/17297081

#SPJ11

Answer:

This is a geometric series with first term 1/4 and common ratio 1/4. So the sum of this series is:

[tex] \frac{ \frac{1}{4} }{1 - \frac{1}{4} } = \frac{1}{4} \div \frac{3}{4} = \frac{1}{4} \times \frac{4}{3} = \frac{1}{3} [/tex]

Answer:

19,322 cubic feet.

Step-by-step explanation:

Volume = Length × Width × Height

Given the measurements provided:

Length = 24 1/2 feet

Width = 14 feet

Height = 11 feet

We need to convert the mixed number for the length, 24 1/2 feet, into a single fraction.

24 1/2 feet = 24 + 1/2 feet = 48/2 + 1/2 feet = 49/2 feet

Now we can substitute the given values into the formula for volume:

Volume = (Length) × (Width) × (Height)

= (49/2 feet) × (14 feet) × (11 feet)

Next, we can multiply the lengths, widths, and heights together:

Volume = (49/2 feet) × (14 feet) × (11 feet)

= 49 × 14 × 11 cubic feet / 2

Finally, we can calculate the volume by dividing the product by 2:

Volume = 49 × 14 × 11 cubic feet / 2

= 19,322 cubic feet