What are the 3 main causes of CO2 emission?

The light emitted by hydrogen atoms appears red because the most intense line in its spectrum, at 656 nm, is in the red section of the visible spectrum.

The principal quantum number(n) for the Lyman series is 1. As a result, the Lyman series has the highest energy in the hydrogen spectrum. This is due to the fact that helium has more electrons than hydrogen. Helium has two, while hydrogen has only one. More spectral lines will be noticed as more electrons are stimulated. Helium therefore has more spectral lines than hydrogen. Gamma rays are the most energetic, have the shortest wavelengths, and have the highest frequencies.

Learn more about spectrum here-

https://brainly.com/question/12157930

#SPJ4

Sliding friction is significantly less than static friction for a pair of specified surfaces. because moving an object in motion is simpler than moving an object at rest.

Contact points are not given enough time to fully interlock while sliding. thus, less friction. But because the surfaces interlock so effectively while the object at rest, friction increases. The difference between static and sliding friction is thus explained.

Friction force has an identical amplitude in the reverse direction to any little force applied to an object. The greatest static friction force on an item is s times the usual force.

To know more about Sliding friction visit :

https://brainly.com/question/17140804

#SPJ4

A 3 wavelength lamp is a type of light therapy device used to improve skin health and appearance.

Wavelength is the distance between two successive peaks or troughs of a wave, such as light, sound, or other forms of energy. It is measured in meters or nanometers and is related to the frequency of the wave, as the frequency is inversely proportional to the wavelength. Wavelength can also be used to describe the physical size of an object, such as a particle or cell.

It emits both visible and invisible light in three different wavelengths, namely red, blue and near-infrared. The red wavelength helps to reduce inflammation and improve circulation, while the blue wavelength helps to kill acne-causing bacteria. The near-infrared wavelength helps to boost collagen and elastin production, which can help to improve skin texture and firmness. This type of light therapy is effective in treating a number of skin conditions and has been used in clinics and spas for many years.
know more about wavelentgh click-
https://brainly.com/question/10750459
#SPJ4

The safest plays to play sprinting, tagging, and throwing the ball is d) a football field

A football/soccer field is a rectangular field surrounded by lines called perimeters. The two long lines are the touch lines and the two short lines are the goal lines. It is divided in half by the midline connecting the midpoints of the two contact lines. The field is 100 yards long, with 10-yard end zones for each team. The field has stripes across the width of the field at 5-yard intervals. The soccer field is 160 feet wide. The games that can be played on the football field are sprinting, throwing the ball, tagging, etc.

Learn more about the football field in

https://brainly.com/question/17831728

#SPJ4

The center of mass of the stick will be moved above 79.2 cm to the right before the stick begins to rotate.

The equilibrium position of the meter rule is the point at which all the forces acting on the meter rule sums to zero.

The equilibrium position of the meter rule is determined by taking moment about the center mark or the end position.

-------5cm---------------------------------------------------------100cm

       ↓             x             ↓

     0.02 kg                  W

sum of anticlockwise moment = sum of clockwise moment

0.02 (x) = W (100 - (5 + x) )

0.02x = 0.1 ( 100 - ( 5 + x ) )

0.02x = 0.1 ( 100 - 5 - x )

0.02 x = 10 - 0.5 - 0.1x

0.12 x = 9.5

x = 9.5 / 0.012

x = 79.2 cm

Thus, when the center mass is moved any distance above 79.2 cm, the meter stick will begin to rotate.

Learn more about center of mass here: https://brainly.com/question/13499822

#SPJ1

When a moving pool ball hits a stationary ball, some kinetic energy from the moving pool ball is transferred to the stationary ball and it attains momentum.

Both in the case of elastic and inelastic collisions, momentum is preserved. That means the total momentum will always be the same.

Momentum (ρ) is defined as "mass in motion". There are two factors affecting the momentum. Mass(m) and velocity(v).

                       ρ = m×v

So for a stationary object momentum will be 0. When the moving ball hits the stationary ball, it starts moving, because it gets kinetic energy from the moving ball. The total momentum before and after the collision will always be equal.

               mₐ₁× vₐ₁ = mₐ₂×vₐ₂ + m₂ v₂

                     mₐ₁× vₐ₁ is the momentum of ball A before the collision

                     mₐ₂×vₐ₂ is the momentum of ball A after collision

                     m₂ v₂    is the momentum of ball B after  collision.

So the stationary ball begins to move after the collision due to increased kinetic energy and attains some momentum. The total momentum of the system remains the same.

For further information on momentum, please refer

https://brainly.com/question/17662202

#SPJ4

Answer:

Driver 1

Explanation:

In this scenario, driver 1 has a greater average speed than driver 2. To determine the average speed of a driver, we need to divide the distance traveled by the time it took to travel that distance. In the case of driver 1, who traveled 100 km in 2 hours, their average speed would be 100 km / 2 hours = 50 km/hour. For driver 2, who traveled 100 km in 3 hours but stopped for an hour halfway, their average speed would be 100 km / (3 hours - 1 hour) = 33.33 km/hour. Since 50 km/hour is greater than 33.33 km/hour, driver 1 has a greater average speed.

The greatest acceleration the man can give the airplane is 6.102*10^-3 m/s^2

What is a frictional force ?

The force produced when two surfaces slide past one another and make contact is known as frictional force. The surface texture of these forces and the amount of force pressing them together have the biggest impact.

Mass of the person

m1 = 93kg

Mass of the air plane

m2 = 118000 kg

Coefficient of static friction between the shoes of the person and floor

μs=0.79

Acceleration due to gravity

g=9.8m/s^2

The maximum force the person can apply on the floor is equal to his weight

F = w = m1∗g

         = 93∗9.8=911.4 N

The maximum frictional force he can get from the floor is the product of coefficient of static friction and normal reaction

Ff = μs∗N

   = μs∗W

   = 0.79 ∗ 911.4 = 720 N

Let's assume that the individual is able to use or apply the entire frictional force in pushing the airplane.

Following that, the relationship can be used to determine the acceleration an air plane created.

Ff = m2 * a

a = Ff/m2

  = 720/118000

  = 6.102*10^-3 m/s^2

To learn more about force use link below:

https://brainly.com/question/12785175

#SPJ4

It travels at a speed of 36 meters per second

The velocity of a wave is a measure of how fast the wave travels through a medium. It is given by the equation v = λf, where v is the velocity, λ is the wavelength, and f is the frequency. In this case, the given wavelength is 3.0 meters and the given frequency is 12 Hertz.

Plugging these values into the equation, we can calculate the velocity of the wave:

v = (3.0 m) * (12 Hz) = 36 m/s.

This means that the wave travels at a speed of 36 meters per second.

It is important to note that the velocity of a wave depends on the properties of the medium through which it is traveling, as well as the wavelength and frequency of the wave itself.

To learn more about the velocity of a wave, check out https://brainly.com/question/29765286

The floor and the ball must both be included for the released ball to be in an isolated system.

What does the conservation of linear momentum entail?

According to the conservation of linear momentum concept, a system's overall momentum is conserved in an isolated setting.

A system that is isolated is one that is unaffected by outside forces.

The items required to be included for the released ball to be in an isolated system are the floor and the ball.

To learn more about isolated system. please click on below link

https://brainly.com/question/30079145

#SPJ4

The chemical formula of Magnesium Bromine MgBr₂.

Magnesium bromide is a chemical compound which is formed by the combination of magnesium and bromine.

The chemical formula of Magnesium Bromine MgBr₂.

The colour of Magnesium Bromine is white and it is a very deliquescent crystalline type solid in nature.

It can be sometimes used as a mild sedative and also we can use is as an anticonvulsant which is commonly used in the treatment of nervous disorders.

It can be easily soluble in water and sometimes it can also be easily dissolved in alcohol.

For more questions on Magnesium bromide

https://brainly.com/question/25947089

#SPJ4

A decimal system of measurement, the metric system was developed in France in 1799 and has since been widely used around the world.

The metric system serves as the foundation for the International System of Units, the universally accepted system of measurement. Although the United States legal framework was modified in 1866 to permit the use of the metric system, the country has not yet adopted it as its "official" system of measuring. Body-based measuring was the foundation on which the United States English System of measurement was built. Traditionally, the foot, the inch, and the pound have served as the foundational units of measurement in the English system. Metric prefixes like kilo, Millis, and centi are used to denote multiples of a base unit, such as the meter or the gram. When it comes to measuring length, the English system has a bad reputation.

The complete answer is attached as an image.

Want to know more about units visit the link which is given below;

https://brainly.com/question/10433377

#SPJ4

Making ensuring the weight is positioned above the boat's center of mass is important while loading them onto the boat.

The center of mass is a location within or outside of someone where we believe the entirety of the body's mass to be concentrated. We are aware that a boat will suffer an upward force equivalent to the mass of the fluid it is dislodging while it is hovering over it.

The likelihood of the boat being unbalanced is significantly decreased when the passengers or weight are positioned close to the center of mass of the boat.

To know more about center of mass, visit,

brainly.com/question/28865238

#SPJ4

Explanation:

The magnitude of the increase is 0.9555J

Explanation

Potential Energy (PE) = mgh mass(m) = 3 * 10 ^ - 3 * kg

, acceleration due to gravity (g) = 9.8m / (s ^ 2) distance(h) = 50m PE = 3 * 10 ^ - 3 * 9.8 * 50 = 1.47J Increase in internal energy = 65% of 1.47J = 0.65 × 1.47J

= 0.9555J

Formula of

Line segment

is AB =

[tex]\sqrt{(x_{2} -x_{1} )^{2} } +\sqrt{(y_{2} -y_{1} )^{2} }[/tex]

Line segment

is a part of line with definite length. It has two ending points whereas a line has no end points and extended infinitely in both the direction. Line which joins both ending points with possible shortest way is known as

Line segment

.

            A ______________________ B    

        (x₁,y₁)                                             (x₂,y₂)      

This line segment can be represented as [tex]\frac{}{AB} /\frac{}{BA}[/tex]. In other word we can say line segment is

subset

of line, so it contains all the points of line lying between both end point of segment. For shorter length it can simply measure by

ruler

. A bar (-) is always on top of its notation {[tex]\frac{}{AB}[/tex]}.

Learn more about

Line segment

visit:

brainly.com/question/30072605

#SPJ4                        

Formula of Line segment is AB =  [tex]\sqrt{(x_{2}-x_{1})^{2} } +\sqrt{(y_{2}-y_{1})^{2} }[/tex]

Line segment

is a part of line with a definite length. It has two ending points whereas a line has no end points and extended infinitely in both the direction. Line which joins both ending points with possible shortest way is known as

Line segment

        A ______________________ B    

       (x₁,y₁)                                             (x₂,y₂)      

This line segment can be represented as[tex]\overline{AB}/\overline{BA}[/tex] . In other word we can say line segment is subset of line, so it contains all the points of line lying between both end point of segment. For shorter length it can simply measure by ruler A bar (-) is always on top of its notation {[tex]\overline{AB}/\overline{BA}[/tex]}.

To learn more about Line segment :

brainly.com/question/30072605

#SPJ4                        

The collision of two billiard balls is an example of elastic collision.

An elastic collision is a collision where Kinetic energy is preserved. In this type of collision, there will be no change in overall kinetic energy and momentum.

An inelastic collision is where the Kinetic energy is not preserved. Here some of the kinetic energy is transferred to some other form of energy like thermal energy or sound energy.

In both type of collisions, momentum is preserved. There are fewer examples of  perfectly elastic collision in real life. Collisions in atomic levels are examples of perfectly elastic collisions. But some collisions where the energy loss is negligible are considered elastic collisions. One such example is the collision of the billiard balls.

So when a billiard ball hits another it is an elastic collision.

For further details regarding elastic collisions, please refer

https://brainly.com/question/2356330

#SPJ4

Rocky Mountains and Great Plains rock came together to form one rock formation, but then something tore it apart. The first claim is true while the second claim needs to be eliminated

It should be remembered that the Rocky Mountains and the Great Plains are two separate rock formations that did not form simultaneously. The older rock's minerals were not incorporated into the younger rock as a result.

After combining the rock from the Rocky Mountains and the Great Plains to form one formation, something tore it apart. As a result, the second claim must be rejected because it is false.

For more information on rocky mountains  kindly visit to

https://brainly.com/question/13438263

#SPJ1

The equivalent capacitance is  21 μF.

In electrical engineering, equivalent capacitance often abbreviated as C eq—is a measurement of the total combined electric charge held in two or more capacitors connected in series or parallel. A capacitor is an electrical device that stores electrical energy into the electric field. Typically, a capacitor has two electrical leads that are separated by a dielectric or other insulating substance.

We are given that,

capacitance =c₁ =9  μF

capacitance = c₂ =6  μF

capacitance = c₃ = 3  μF

capacitance = c₄ =2  μF

capacitance = c₅ = 1  μF

Thus If the capacitor is connected in parallel the equivalent capacitance, cₐ can be calculated by the equation,

cₐ= c₁+c₂+c₃+c₄+c₅

cₐ = 9 +6 +3 +2+1 μF

cₐ = 21 μF

Therefore , The equivalent capacitance would be  21 μF.

To know more about equivalent capacitance

https://brainly.com/question/27988457

#SPJ4

B. the building at A O muscle fibre dendrites O branches and axon terminals. The 'B' structure consists of axon branches and Axon terminals are the structure designated "A."

1). The structure labeled "B" is: Axon branches

-Because a motor neuron's axon has multiple branches that come together to form a neuromuscular junction, one of its axons can innervate numerous muscle fibers.

- These branches carry potential action in the direction of certain synaptic knobs.

2). The structure labeled "A" is: Axon terminals

-It creates a neuromuscular connection with the motor end plate of the sarcolemma and features a bulged structure at its most terminal end.

- Neurotransmitter is exocytosed from the axon terminal.

- Synaptic cleft is the area between the sarcolemma and the synaptic knob at the axon terminal.

Any of the button-like ends of axons through which axons create synaptic connections with other nerve cells or with effector cells is known as an axon terminal. Neurotransmitter-containing synaptic vesicles bind at the axon terminal. The cell opens up to calcium ions upon activation by a graded potential or by an action potential of the presynaptic neuron. This starts a chain reaction that leads to the synaptic vesicles fusing into the axon terminal membrane. The synaptic vesicle proteins that the calcium ions activate create fusion holes that allow the neurotransmitters to leave. The effects of the neurotransmitters on the target cell only last for a brief period of time.

Learn more about Axon terminals here:

https://brainly.com/question/19435017

#SPJ4

The centripetal acceleration of the ball if its tangential speed is increased to 2 v₀ is (4 M v₀²)/R.

The centripetal force equation that we are aware of is

F = (m* v²)/r ----(1)

where,

m is the of the ball

v is the velocity

r is the radius

We are aware that F = m* a ----(2)

Equating (1) and (2), we have,

m* a = (m* v²)/r

a = v²/r -----(3)

where, a is centripetal acceleration

In this problem, it is said that, the tangential speed is increased to 2 v₀, then the centripetal acceleration

So, v = 2 v₀, r = R

Substituting the values in (3), we have,

ac = (2 v₀)²/R = 4 v₀²/R

Thus, the required centripetal acceleration is 4 v₀²/R.

The question is incomplete. The complete question has the missing figures that are attached in the attachment below.

To know more about centripetal acceleration:

https://brainly.com/question/20113093

#SPJ4

The total momentum of the system after collision is 12 kg-m/s.

To learn more about collision refer to:

https://brainly.com/question/12497950

#SPJ1

The 10 most prevalent genetic disorders include albinism, Angelman syndrome, Ankylosing spondylitis, Apert syndrome, Charcot-Marie-Tooth disease, Congenital adrenal hyperplasia, Cystic fibrosis, and Down syndrome.

The most prevalent, deadly hereditary disease in the US is cystic fibrosis (CF). The condition affects about 30,000 persons in the US.

How traits and genes are passed down from one generation to the next is the main topic of genetics research. Our DNA contains information that affects our personalities, looks, and even health! Everything starts with genetics. One child has blonde hair like their mother, and their sibling has brown hair like their father; this is due to genetics.

To know more about genetic disorders visit:-

https://brainly.com/question/17404085

#SPJ4

The new capacitance of the capacitor is Cf = 4Ci is the correct answer.

Capacitance is an electrical property of a material or system that is related to the amount of charge it can store in an electric field. It is measured in Farads (F), which is the ratio of the electric charge stored on a capacitor to the applied voltage. In other words, it is an expression of the ability of an electrical system or component to store energy in the form of an electric field. It is an important factor in the design of electrical systems, and can be used to control the flow of electric current in circuits. It is also used to measure the amount of voltage that a capacitor can sustain before its capacitance decreases.

Using the Capacitance theorem

Given:

Capacitance of Parallel Plate Capacitor = C

Area = 2A

Distance = 1/2d

Volume of the dielectric remains the same.

New Capacitance =?

1.  Initial Capacitance can be written as:

Ci = A ∈0 / d

2.  After putting the desired values of area and distance.

Cf = 2A ∈0 / (d/2)

Cf = 4A ∈0 / d

Cf = 4Ci

To learn more about Capacitance:

https://brainly.com/question/49621

#SPJ4

The second 2 kg stone has four times the kinetic energy of the first 2 kg stone.

The kinetic energy of an object is equal to (1/2) * m * v^2, where m is the mass of the object and v is the velocity of the object.

For the first 2 kg stone, the kinetic energy is

(1/2) * 2 kg * 1 m/s^2 = 1 kg m^2/s^2.

For the second 2 kg stone, the velocity is twice as fast, so the kinetic energy is

(1/2) * 2 kg * (2 m/s)^2 = 8 kg m^2/s^2.

The second 2 kg stone has 8 kg m^2/s^2 of kinetic energy, which is four times the kinetic energy of the first 2 kg stone, which has 1 kg m^2/s^2 of kinetic energy.

Learn more about Kinetic Energy here:

https://brainly.com/question/20658056

#SPJ4

Yes, option a—a chorus where different people sing different notes of a song to generate harmony—is the right response.

The definition of the term "collaborate" according to Webster's Dictionary is "to work jointly or together, especially in an intellectual pursuit." Therefore, collaborative problem solving (CPS) is basically a cooperative effort to solve difficulties. There are four components to the Xandar task in the CPS task harmonization that PISA has made available. The components of the task require the respondent to work together to create a method for solving problems, put the method into practice, arrive at a solution, and assess the answer. For instance, if parents in a custody battle appear to back and forth on childcare arrangements, it may be a sign that one parent has concerns about

To learn more about harmony please click on below link

https://brainly.com/question/2694990

#SPJ4

We first perform an algebraic solution to the equation before using N to obtain a numerical solution. Alternately, we might use NSolve to begin by numerically solving the equation.

Systems of equations can be solved using one of three techniques: graphing, substitution, or elimination. To answer a problem by graphing, just plot the given equations on a graph and identify the point(s) where they all intersect.

The differential equation solving functions of the Wolfram Language can be used to solve a wide variety of differential equation classes, automatically choosing the best techniques without user preprocessing.

To know more about Systems of equations visit:-

https://brainly.com/question/21620502

#SPJ4

Insects can change gradually through progressive metamorphosis or completely through total metamorphosis.

Some insects, including beetles, ants, bees, wasps, butterflies, moths, and bees, develop through a special life cycle known as full metamorphosis. Egg, larva, pupa, and adult are the four separate phases of complete metamorphosis. One type of insect that undergoes complete metamorphosis is the beetle, which includes ladybugs. Butterflies and flies are two examples of common and recognised insects that undergo complete metamorphosis. Beetles, bees, wasps, ants, and fleas are among other insects that undergo complete metamorphosis. Termites, praying mantises, and cockroaches all go through partial metamorphosis. Ants, fleas, and wasps all go through a full metamorphosis. Complete metamorphosis is finally distinguished from other types of growth by the several stages that are produced with each

To learn more about  metamorphosis please click on below link

https://brainly.com/question/14372631

#SPJ4

λ = v/f. Wavelength, velocity, and frequency are all given in units of meters, seconds, and hertz (Hz).

Wavelength and frequency are related to wave speed via the wave speed equation (Speed = Wavelength x Frequency). This equation can be used to determine wave speed when the wavelength and frequency are known.

The frequency formula in terms of time is provided as follows: f = 1/T, where T is the duration of one cycle in seconds and f is the frequency in hertz. The formula for calculating frequency in terms of wavelength and wave speed is given as f = /, where is the wave speed and is the wavelength of the wave.

To know more about wavelength visit:-

https://brainly.com/question/12924624

#SPJ4

The power rating of an engine who can lift a 100kg object 5m vertically in 4 seconds is 125watt.

In electrical engineering and mechanical engineering, the power rating of equipment is the highest power input allowed to flow through particular equipment. According to the particular discipline, the term power may refer to electrical or mechanical power.

From the question given :
Force (f) = 100

Time (t) = 4 seconds

Distance (d) = 5m

Work done = f * d

= 100 * 5

= 500

So, The power will be

= Work / time

= 500 / 4

= 125watt

Therefore, the power rating of the engine is 125watt.

Learn more about power https://brainly.com/question/3854047

#SPJ4