Answer:
We can find out what animals eat..and how long a food chain could get..?
Explanation:
How many ATOMS of OXYGEN are there in the following compound
Which characteristic of a star will determine how it ends
Which best describes why NH4+ can form an ionic bond with Cl–?
Its outermost shell gains one or more electrons from Cl–.
Its positive charge is attracted to the negative charge of Cl–.
It has a negative charge that is spread over the entire ion.
It has a nitrogen atom that is strongly attracted to Cl–.
Answer:
Its positive charge is attracted to the negative charge of Cl–.
Explanation:
The best description of why NH₄⁺ forms an ionic bond with Cl⁻ is that its positive charge is attracted to the negative charge of Cl⁻.
An ionic bond forms as a result of transfer of electrons. As a result the seemingly metal ion is attracted to the negative non-metal ion.
The electrostatic force of attraction between these ions is the ionic or electrovalent bond.
So, the attraction between these opposite charges will form the ionic bond.
Answer:
B: Its positive charge is attracted to the negative charge of Cl–
Explanation:
right on edge2021
100POINTS! ANSWER ALL 3 PARTS (look at the picture)
Answer:
Part 1-B
Part 2-D
Part 3-A
Answer:
1.B
2.D
3.A
Explanation:
.......................
As a heavy metal ball rolls down a hill, it goes faster and faster. Which statement is true?
The ball's potential energy is transferring into kinetic energy
Brainly if correct? Thanks!
Answer:
A
Explanation:
The balls potential energy is changing to kinetic energy
what type of reaction is AsCl+H2S --> As2S3+HCl
Answer:
Double replacement:
Explanation:
Chemical equation:
2AsCl + 3H₂S → As₂S₃ + 6HCl
The given reaction is double displacement reaction. In this reaction arsenic trichloride and hydrogen sulfide react and produced arsenic sulfide and hydrogen chloride. In double displacement reaction both anion an cation of reactants are exchanged with each other.
Double replacement:
It is the reaction in which two compound exchange their ions and form new compounds.
General equation:
AB + CD → AD +CB
Measure that affects the thermal energy of matter but not it's temperature.
Answer: mass
Explanation:
Elemental phosphorus reacts with chlorine gas according to the equation
P4(s)+6Cl2(g)→4PCl3(l)
A reaction mixture initially contains 45.57 g P4 and 130.2 g Cl2.
Once the reaction has reached completion, what mass (in g) of the excess reactant is left?
(Express the mass in grams to three significant figures.)
Mass (in g) of the excess reactant (P₄) left = 7.626 g
Further explanationGiven
Reaction
P4(s)+6Cl2(g)→4PCl3(l)
45.57 g P4 and 130.2 g Cl2
Required
mass (in g) of the excess reactant left
Solution
mol P₄ (MW=124 g/mol) :
45.57 : 124 = 0.3675
mol Cl₂(MW=71 g/mol) :
130.2 : 71 = 1.834
mol : coefficient of reactant : P₄ : Cl₂ :
= 0.3675/1 : 1.834/6
= 0.3675 : 0.306
Cl₂ as limiting reactant(smaller ratio)
Reacted mol of P₄ (as an excess reactant):
=1/6 x 1.834
= 0.306
Unreacted mol of P₄ :
= 0.3675 - 0.306
= 0.0615
Mass of P₄(left) :
= 0.0615 x 124
= 7.626 g
The pressure exerted by the atmosphere at sea level is 14.7 Libs per square inch how many pounds of force are pressing on a rectangle with an area of 76.3cm^2
Pounds of force pressing on a rectangle : F = 173.86 lbs
Further explanationGiven
P at sea level = 14.7 lbs/in²
Area of rectangle : A = 76.3 cm²
Required
Pounds of force
Solution
P = F/A
F= P.A
Conversion :
1 cm² = 0.155 in²
76.3 cm² = 11.827 in²
Input the value :
F = 14.7 lbs/in² x 11.827 in²
F = 173.86 lbs
Most organic compounds are made of just four elements.
What are they?
Answer:
hydrogen, carbon, oxygen and nitrogen
Explanation:
Most organic compounds are made up of the four elements: hydrogen, carbon, oxygen and nitrogen.
Most organic compounds are made of just four elements are hydrogen, carbon, oxygen and nitrogen.
What do you mean by an organic compound ?The term organic compound is defined as a substance that contains covalently - bonded carbon and hydrogen and often with other elements.
Benzoic acid, aromatic compounds, benzoic aldehyde, propanoic acid, butanoic acid, malonic acid, amines, heterocyclic compounds, VOC, benzoic acid, and diethyl malonate are some examples of organic compounds.
Carbohydrates, lipids, proteins, and nucleotides are all organic compounds that are required for human function. Because they contain both carbon and hydrogen, these compounds are classified as organic.
Thus, Most organic compounds are made of just four elements are hydrogen, carbon, oxygen and nitrogen.
To learn more about the organic compound, follow the link;
https://brainly.com/question/5994723
#SPJ2
Zack and Frankie were planning a game of flashlight tag on both Friday and Saturday night.
Answer:
oKaY?!
Explanation:
A mixture is made by combining 1.29 lb of salt and 5.35 lb of water.
What is the percentage of salt (by mass) in this mixture?
Answer:
19.47%
Explanation:
[tex]\frac{1.29}{1.29+5.35}[/tex]
Please recheck, for this answer may not be correct
Which chemical used to make explosives is a fertilizer-based explosive, but requires nitric acid as a component to be an explosive compound, and has a wide range of uses, including as a noncorrosive de-icing material for sidewalks?
a. Aluminum nitrate
b. Triacetone triperoxide (TATP)
c. Hexamethylene triperoxide diamine (HMTD)
d. Urea nitrate
Answer:
d. Urea nitrate
Explanation:
Urea nitrate is a fertilizer-based explosive that is produced in one step by reaction of urea with nitric acid. The is an exothermic reaction, therefore, necessary steps and precautions must be taken to ensure safety during the process. The equation of the reaction is given below:
(NH₂)₂CO (aq) + HNO₃ (aq) → (NH₂)₂COHNO₃ (s)
It is as easily-made explosive and can also be used as a catalyst in Diels-Alder reactions of aromatic amines.
In the presence of water, urea nitrate readily decomposes to its original components, urea and nitric acid.
On its own, urea is commonly used as a deicer for sidewalks as it is a noncorrosive de-icing material. However, it is a more costly method of deicing, compared to other methods and it is best used where water runs off into vegetation than into a water-body or a storm drain because of its high-oxygen demand which could result in its reducing the oxygen level of the water body. It It is readily found in nature (in our urine) and is also synthesized artificially. It has a very high nitrogen content, and is most often used as a nitrogen‐based fertilizer.
which of the following is a strong acid?
A, HCI (hydrochloric acid)
B, HF (hydrofluoric acid)
C, NaOH (sodium hydroxide)
D, NH3 (ammonia)
use scientific notation to solve
A solution was diluted 1/40, and the final concentration was 20%. What was the original concentration?
The original concentration : 800%
Further explanationGiven
Diluted 1/40
Final concentration 20%
Required
The original concentration
Solution
Dilution is the process of adding solvent to get a more dilute solution.
The moles(n) before and after dilution are the same.
Can be formulated :
n₁ = n₂
M₁.V₁ = M₂.V₂
diluted 1/40(dilution factor)⇒ V₁/V₂=1/40⇒V₂/V₁=40
M₂ = 0.2(20%)
Input the value for M₁ :
M₁=M₂ x (V₂/V₁)
M₁ = 0.2 x 40
M₂ = 8(800%)
=
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP!!!
DUE IN 5 MINUTES
TRUE OR FALSE? CHEMISTRY PLEASE ONLY ANSWER IF YOU’RE 100% SURE!!
Answer:
true mark me brainlist
Explanation:
Crude oil has many applications once it has been distilled at a refinery. According to the diagram, what process is used to distill crude oil into its various components to use energy distribution?
A) separation by density
B) separation by boiling points
C) separation by the porosity of the components
D) separation by the organic content or each component
Answer:
B) separation by boiling points
Explanation:
According to the diagram depicted, crude oil is separated into its different units using boiling points.
The boiling points of a compound is the temperature at which it begins to boil. The process of fractional distillation is used in the oil industry to separate crude oil into its components. When the boiling point of a oil fraction is reached, it becomes vaporized and rises within the columnCalculate the temperature change when 2.00 L at 293 K is compressed to 1.00 L.
Answer:
[tex]\Delta T=-146.5K[/tex]
Explanation:
Hello!
In this case, given the Charles' law which allows us to understand the volume-temperature behavior as shown below:
[tex]\frac{T_1}{V_1}=\frac{T_2}{V_2}[/tex]
Thus, given that we need to calculate the final temperature after the compression, we obtain:
[tex]T_2=\frac{V_2T_1}{V_1}=\frac{1.00L*293K}{2.00L}\\\\T_2=146.5K[/tex]
Thus, the temperature change would be:
[tex]\Delta T=T_2-T_1=146.5K-293K\\\\\Delta T=-146.5K[/tex]
Best regards!
Write a balanced equation for the double-replacement precipitation reaction described, using the smallest possible integer coefficients.
A precipitate forms when aqueous solutions of lead(II) nitrate and magnesium sulfate are combined.
Do not include states such as (s) or (aq). It is not necessary for you to indicate which of the products is the precipitate.
_____ + _____ ----> _____ + _____
2). Write a balanced equation for the double-replacement precipitation reaction described, using the smallest possible integer coefficients.
A precipitate forms when aqueous solutions of manganese(II) nitrate and potassium hydroxide are combined.
Do not include states such as (s) or (aq). It is not necessary for you to indicate which of the products is the precipitate.
_____ + _____ -----> _____ + _____
3). Write a balanced equation for the single-replacement oxidation-reduction reaction described, using the smallest possible integer coefficients.
The reaction that takes place when zinc metal combines with aqueous hydrobromic acid.
______ + ______ -----> _____ + _____
4). Write a balanced equation for the single-replacement oxidation-reduction reaction described, using the smallest possible integer coefficients.
The reaction that takes place when copper metal combines with aqueous silver nitrate .
_____ + _____ ---> _____ + _____
Answer:
1)Pb(NO3)(aq) + MgSO4(aq)------> Mg(NO3)2(aq) + PbSO4(s)
2)Mn(NO3)2(aq) + 2KOH(aq) ----->Mn(OH)2(s) + 2KNO3(aq)
3)Zn(s) + 2H^2+(aq)----->Zn^2+(aq) + H2(g)
4) Cu(s) + 2Ag^+(aq) ---->Cu^2+(aq) + 2Ag(s)
Explanation:
A double replacement reaction is one in which ions exchange partners.
We can see that the ions in the reactants exchanged their partners in the products. Solid lead II sulphate was precipitated.
Reaction 2 is a single replacement reaction. Solid manganese hydroxide is formed.
Reactions 3 and 4 are redox processes as shown in the respective equations.
When you apply 1000 joules of energy to 50 grams of water its temperature changes to 30 degrees . What was the initial temperature in celsius?
Answer:
25.2°C
Explanation:
Given parameters:
Energy applied to the water = 1000J
Mass of water = 50g
Final temperature = 30°C
Unknown:
Initial temperature = ?
Solution:
To solve this problem, we use the expression below:
H = m c Ф
H is the energy absorbed
m is the mass
c is the specific heat capacity
Ф is the change in temperature
1000 = 50 x 4.184 x (30 - initial temperature )
1000 = 209.2(30 - initial temperature)
4.78 = 30 - initial temperature
4.78 - 30 = - initial temperature
Initial temperature = 25.2°C
. Predict the possible products for the following reaction and include
molecular, complete ionic, and net ionic equations.
NA2SO4 (aq) +γ (BrO3)2 (aq) --->
Answer:
Introduction
As a diligent student of chemistry, you will likely encounter tons of reactions that occur in aqueous solution (perhaps you are already drowning in them!). When ions are involved in a reaction, the equation for the reaction can be written with various levels of detail. Depending on which part of the reaction you are interested in, you might write a molecular, complete ionic, or net ionic equation.
Definitions of molecular, complete ionic, and net ionic equations
A molecular equation is sometimes simply called a balanced equation. In a molecular equation, any ionic compounds or acids are represented as neutral compounds using their chemical formulas. The state of each substance is indicated in parentheses after the formula. [Huh?]
Let's consider the reaction that occurs between \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text. When aqueous solutions of \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text are mixed, solid \text{AgCl}AgClstart text, A, g, C, l, end text and aqueous \text{NaNO}_3NaNO
3
start text, N, a, N, O, end text, start subscript, 3, end subscript are formed. Using this information, we can write a balanced molecular equation for the reaction:
\text{AgNO}_3(aq) + \text{NaCl}(aq) \rightarrow \text{AgCl}(s) + \text{NaNO}_3(aq)AgNO
3
(aq)+NaCl(aq)→AgCl(s)+NaNO
3
(aq)start text, A, g, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis, plus, start text, N, a, C, l, end text, left parenthesis, a, q, right parenthesis, right arrow, start text, A, g, C, l, end text, left parenthesis, s, right parenthesis, plus, start text, N, a, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis
[What kind of reaction is this?]
If we could zoom in on the contents of the reaction beaker, though, we wouldn't find actual molecules of \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, or \text{NaNO}_3NaNO
3
start text, N, a, N, O, end text, start subscript, 3, end subscript. Since \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, and \text{NaNO}_3NaNO
3
start text, N, a, N, O, end text, start subscript, 3, end subscript are soluble ionic compounds, they dissociate into their constituent ions in water. For example, \text{NaCl}NaClstart text, N, a, C, l, end text dissociates into one ion of \text{Na}^+Na
+
start text, N, a, end text, start superscript, plus, end superscript for every ion of \text{Cl}^-Cl
−
start text, C, l, end text, start superscript, minus, end superscript; these ions are stabilized by ion-dipole interactions with the surrounding water molecules. [I don't get it!]
Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.
Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.
Sodium chloride dissociates into sodium and chloride ions in water, and these ions become solvated by the highly polar water molecules. Image credit: "Salts: Figure 1" by OpenStax Anatomy and Physiology, CC-BY-NC-SA 4.0.
From the molecular formula, we can rewrite the soluble ionic compounds as dissociated ions to get the complete ionic equation:
\text{Ag}^+(aq) + \blueD{{\text{NO}_3}^-(aq)} + \maroonD{\text{Na}^+(aq)} + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s) + \maroonD{\text{Na}^+(aq)} + \blueD{{\text{NO}_3}^- (aq)}Ag
+
(aq)+NO
3
−
(aq)+Na
+
(aq)+Cl
−
(aq)→AgCl(s)+Na
+
(aq)+NO
3
−
−
(aq)
+
Na
+
(aq)
+Cl
−
(aq)→AgCl(s)+
Na
+
(aq)
+
NO
3
−
(aq)
What is the speed of an electromagnetic wave with a frequency of 8 Hz and a wavelength of 5.78 nm? (1 nm = 10-9 m)
Explanation:
Speed = Frequency * Wavelength
= 8Hz * 5.78nm
= (8 * 5.78 * 10^-9)m/s
= (4.624 * 10^-8)m/s or 46.24nm/s.
What is the measure of the amount of dissolved salts in ocean water?
Answer:
Salinity
HOPE THIS HELPS! :)
Explanation:
a. Use the balanced equation C3H8 + 5O2 -> 3CO2 + 4H2O to answer the following questions
i. How many moles of CO2 are produced from 5 moles 02? (1 point)
ii. How many grams of CO2 are produced from 5 moles O2? (2 points)
iii how many grams of CO2 are produced from 128.00g O2? (2 points)
Answer:
i. 3 moles.
ii. 132.03 grams.
iii. 105.6 grams.
Explanation:
Hello!
In this case, given the balanced chemical reaction, we can proceed as follows:
i. By starting with 5 moles of oxygen, via the 5:3 mole ratio we compute the produced moles of CO2:
[tex]n_{CO_2}=5molO_2*\frac{3molCO_2}{5molO_2} =3molCO_2[/tex]
ii. Now, since we have previously computed the moles of CO2 from the same moles of oxygen, by using its molar mass (44.02 g/mol), we obtain:
[tex]m_{CO_2}=3molCO_2*\frac{44.01gCO_2}{1molCO_2} =132.03gCO_2[/tex]
iii. Now, we need to combine the previously used two proportional factors for the calculation of the mass of CO2 from 128.00 grams of oxygen (molar mass 32.00 g/mol):
[tex]m_{CO_2}=128.00gO_2*\frac{1molO_2}{32.00gCO_2}*\frac{3molCO_2}{5molO_2}*\frac{44.01gCO_2}{1molCO_2}\\\\m_{CO_2}=105.6gCO_2[/tex]
Best regards!
Which of these features was most likely formed by a divergent boundary?
A.Himalayan Mountains
B. San Andreas Fault
C.Mt. St. Helens
D.Great Rift Valley
Answer:
I think the answer is Himalayan Mountain
Explanation:
I'm not sure but I think so
Answer:
Today, the term is most often used to refer to the valley of the East African Rift, the divergent plate boundary which extends from the Afar Triple Junction southward across eastern Africa, and is in the process of splitting the African Plate into two new separate plates.
Explanation:
So it is D
Simplify (4f+13g)(2w)
Answer:
8fw+26gw
i think this is it
Which type of species distribution pattern might require collaboration between different countries for effective preservation?
Answer:
migratory distribution
Explanation: The pattern of migratory distribution of species may require collaboration between different countries for effective preservation. This is because species migration can make them enter different territories, which will need to provide an effective level of preservation for species survival
What is creating our Earth's Magnetic field?
1) Our Earth's iron liquid outer core rotating around the solid inner core
2) Our Earth having a stationary inner core
3) Our Earth having rocky center
4) All of the above
Answer:
1) Our Earth's iron liquid outer core rotating around the solid inner core
Explanation:
The earth's magnetic field or the geomagnetic field is produced as a result of the earth's iron liquid outer core rotating around the solid inner core.
This produces the earth's magnetic field.
The earth's core is made up of solid and liquid region. Only the densest elements are found within this region. So, the core is made up of metals which are mainly iron and nickel. The outer core is liquid or molten iron and the inner core is solid. The molten iron and nickel in the outer core moves around the inner core and generates the currents which induces a magnetic field round the earth.What did organizing information on the periodic table reveal?
A. Subatomic particles
B. New forms of energy
C. Molecular structures
D. Periodic patterns and trends
Answer:
The groupings of elements in the periodic table reveal various trends, present in groups such as the alkali metals and noble gases, or the lanthanides and actinides. The periodic table can be used to find information on elements or predict the properties of as-of-yet undiscovered elements.
Explanation:
Answer: D
Just took the quiz