The heat of formation of CuBr₂ (s) = -141.8 kJ/mol
The heat of reaction ΔH = ∑ΔHproducts - ∑ΔHreactants
ΔH = ΔHCuBr₂ (s) + ΔHCl₂ (g) - [ΔHCuCl₂ (s) + ΔHBr₂(l)]
where ΔHCuBr₂ (s) = heat of formation of CuBr₂ (s), ΔHCl₂ (g) = heat of formation of Cl₂ (g) = 0 kJ/mol, ΔHCuCl₂ (s) = heat of formation of CuCl₂ (s) = -205.9 kJ/mol, ΔHBr₂(l) = heat of formation of Br₂(l) = 0 kJ/mol and ΔH = heat of reaction = 64.1 kJ/mol
Substituting the values of the variables into the equation, we have
ΔH = ΔHCuBr₂ (s) + ΔHCl₂ (g) - [ΔHCuCl₂ (s) + ΔHBr₂(l)]
64.1 kJ/mol = ΔHCuBr₂ (s) + 0 kJ/mol - [-205.9 kJ/mol + 0 kJ/mol]
64.1 kJ/mol = ΔHCuBr₂ (s) + 0 kJ/mol + 205.9 kJ/mol - 0 kJ/mol
64.1 kJ/mol = ΔHCuBr₂ (s) + 205.9 kJ/mol
ΔHCuBr₂ (s) = 64.1 kJ/mol - 205.9 kJ/mol
ΔHCuBr₂ (s) = -141.8 kJ/mol
So, the heat of formation of CuBr₂ (s) = -141.8 kJ/mol
Learn more about heat of formation here:
https://brainly.com/question/13925548
When excess potassium hydroxide and H2SeO3 react whats the net ionic reaction for the acid-base rxn
The required net ionic equation is; 2H^+(aq) + 2OH^-(aq)-----> 2H2O(l)
The molecular reaction equation is;
H2SeO3(aq) + 2KOH(aq) -----> K2SeO3(aq) + 2H2O(l)
The complete ionic equation is;
2H^+(aq) + SeO3^2-(aq) + 2K^+(aq) + 2OH^-(aq)-----> 2K^+(aq) + SeO3^2-(aq) + 2H2O(l)
Net ionic equation;
2H^+(aq) + 2OH^-(aq)-----> 2H2O(l)
We can clearly see that this is a neutralization reaction hence water is the product of the net ionic equation.
Learn more:https://brainly.com/question/25150590
22.2 g of LiCiO4:3H2O in 125 mL of solution
Express your answer in moles per liter to three significant figures.
What is the Molar Mass?
Answer:
Molarity: concentration measured by the number of moles of solute per liter of solution 3)
Explanation:
According to molar concentration, molarity of solution is 1.104 moles per liter and molar mass is 160.437 g/mole.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.
Molarity of solution is obtained as, 22.2/160.437×1/0.125=1.104 moles per liter.Molar mass of LiClO₄.3 H₂O is 160.437 g/mole.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
Models are used to predict behaviors in the real world.
True
False
Determine the number of moles in 3.13 × 10²³ formula units of MgCl₂.
Answer:
0.52 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{3.13 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{3.13}{6.02} \\ = 0.519933[/tex]
We have the final answer as
0.52 molesHope this helps you
What does the phrase “breaking in” mean as it is used in the passage?
A.
In the first instance, it means "to make something come apart," and in the second instance, it means "to stop doing something."
B.
In the first instance, it means "to enter without permission," and in the second instance, it means "to make softer through use."
C.
In the first instance, it means "to stop doing something," and in the second instance, it means "to make something come apart."
D.
In the first instance, it means "to make softer through use," and in the second instance, it means "to enter without permission."
Answer:
D
Explanation:
It means entry by force.
In which species does sulphur have the more negative oxidation number? Answers: A. H2S B. S8 (elemental form of sulphur) C. H2SO3 D. K2SO4
Answer:
H2S
Explanation:
the oxidation number of S is -2.
If the number of neutrons in the nucleus of the atom is 41, and the atomic number is 40, what is the mass number of that atom
If the number of neutrons in the nucleus of the atom is 41, and the atomic number is 40, the mass number of that atom will be 81
What is mass number?Mass number is the sum of the number of protons which is the atomic number and neutrons of an atom.
It is represented using the letter ‘A.’
How to calculate the mass numberMass number = atomic number + neutrons
We have the atomic number as 40 and the number of neutrons as 41
The mass number = 40 + 41 = 81
Therefore, the mass number of the atom will be 81
Learn more about mass number here:
https://brainly.com/question/1805828
how to do this question ? can anyone help me urgent
Answer:
7.50 and 50L
35atm
6.2atm
Elements in the alkaline earth metal family of the periodic table
have
electronegativity values than elements in the
halogen family of the periodic table.
Answer:Lower
Explanation:
( just had the question on ck12.)
Elements in the alkaline earth metal family of the periodic table have lower electronegativity values than elements in the halogen family of the periodic table as they have less electrons in their valence shell.
What is periodic table?Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.
It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.
Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.
Learn more about periodic table,here:
https://brainly.com/question/11155928
#SPJ2
How many molecules of NaCl are there per mL of the solution?
Explanation:
Nacl is an ionic compound, so there are no molecules only formula units please mark me brainlistWhich pair of compounds has the same empirical formula? C_{3}*H_{8} and C_{3}*H. C_{2}*H_{2} and C_{2}*H C_{4}*H_{10} and C_{6}*H C_{4}*H_{10} and C_{2}*H_{5}
Considering the definition of empirical and molecular formula, the pair of compounds C₄H₁₀ and C₂H₅ has the same empirical formula.
The empirical formula is the simplest expression to represent a chemical compound and indicates the elements that are present and the minimum proportion in whole numbers that there are between their atoms. This formula is also known as the "minimum formula".
On the other side, the molecular formula is the chemical formula that indicates the number and type of different atoms present in the molecule. But unlike the chemical formula, it shows the actual number of atoms that make up a molecule.
In this case, you can observe that if you divide the amount of each element by 2 in compound C₄H₁₀, you get C₂H₅, which is the empirical formula of the compound.
Finally, the pair of compounds C₄H₁₀ and C₂H₅ has the same empirical formula.
Learn more:
https://brainly.com/question/6960643Suppose you did the lab and someone came and said your unknown acid sample was
actually HCl instead of H2SO4. Everything else remains the same; the standard acid was H2SO4,
the base was NaOH. What would change in your final calculation of the unknown acid
concentration
Answer:
H2SO4
Explanation:
because it's not more acidic
Both sulfuric acid and hydrochloric acid are potent acids, but hydrochloric acid is stronger. Because HCl is monoprotic and H2SO4 is diprotic, they differ mostly in their acid types.
Can HCl be substituted for H2SO4?Instead of using hydrochloric acid, sulphuric acid (H 2 SO 4) is preferred because: This acid is commonly utilized for a variety of neutralization reactions. Sulphuric acid is more potent than all other acids and is also simpler and safer to use. Even if there is a risk for negative reactions, they are uncommon.
The majority of the time because it is for a redox reaction or titration in which HCl would react to produce chlorine on its own. You could use phosphoric or sulfuric acid.
In this situation, H 2 SO 4 is preferable to HCl. Due to the considerable acidity of H 2 SO 4, the solution is made to be more acidic than HCl. As a result, the findings of titration using H 2 SO 4 are more precise. H 2 SO4 generates two hydronium ions, whereas HCl only generates one.
It shows how many protons split apart to create hydronium ions. The acid will be more potent the lower the pKa value. Therefore, we can conclude that HCl is more acidic than H2S O 4.
To Learn more About H2SO4, Refer:
https://brainly.com/question/15192429
#SPJ2
5. The density of a gas is lower than the density of a liquid because:
a. gas atoms are smaller than liquid atoms.
b. gas atoms are larger than liquid atoms
c. atoms in a gas are farther apart than atoms in a liquid.
d. atoms in a gas are closer together than atoms in a liquid
Answer:
c
Explanation:
the gas is further apart and the liquid is closer together
What happens when the two atoms get even closer?
Answer:
If two atoms get close together then the electrons of each atom will get attracted to the other one and bc one atom lose electrons gets a positive charge and the one with more electrones will get a negetive charge
Explanation:
brailiest pls pls pls
Multiple choice (ASAP!)
Answer:
c
Explanation:
oxygen is lost electrons are added in oxidation state is decreased
Answer:
the correct answer is C
hope this helps <3
1. The average temperature in Addis Ababa, during the summer, is about 25°C. What is the equivalent Kelvin temperature?
Answer:
25 + 273= 298k.
Explanation:
I guess it's correct answer
The equivalent Kelvin temperature is 298 K.
What is temperature?Temperature is defined as a measurement of an object's or substance's warmth or coolness in relation to a standard value.
It can also defined as the feature of matter that represents the amount of energy of motion of its constituent components.
Temperature scale is defined as a method of indicating or measuring temperature with respect to a beginning point (0 or zero) and a unit of measurement.
Temperature scale is also defined as a way of calibrating the physical quantity temperature in metrology.
Usually there is three types of temperature scale is used.
Celsius scaleKelvin scaleFahrenheit scaleThus, the equivalent Kelvin temperature is 298 K.
To learn more about temperature, refer to the link below:
https://brainly.com/question/11464844
#SPJ2
5 examples of Earth Surface .
Answer:
lithosphere (land)
hydrosphere (water)
biosphere (living things)
atmosphere (air).
Question 4 of 5
A specific oxygen atom has 8 protons and 10 neutrons. If this is a neutral
atom, how many electrons does the atom have?
A. 8
B. 6
C. 4
D. 9
SUBMIT
Answer:
A. 8
Explanation:
For this to be a neutral atom there has to be the same amount of protons and neutrons.
brainliest please. . .
the class of organic compound below contains a carbonyl group as a part of its structure?
Aldehydes and Ketones. Aldehydes and ketones are classes of organic compounds that contain a carbonyl (C=O) group.
that's the correct answer
can I get brainilest
HELPPPPPPPP i need help!!!!!!!!!!!!!
Answer:
C!
Explanation:
when water is boiling the water particles will give each other more space and will then be turned into a gas :)
Please explain this and give answers
Answer:
a) 2Ba + O2 → 2BaO
b) 2HCl + Mg → MgCl2 + H2
c) 2HCl + CuO → CuCl2 + H2O
d) Fe + O2 → Fe2O3
Explanation:
Okay so for
a), you must add 2 at the front of Ba and BaO bcuz you're gonna need your equation balanced.
like as you can see, O has 2 so yeahh, you've got to balance it nicely.
b) you must add 2 in front of HCl bcuz the Cl and H after the reaction happened has 2 in them, were talking about balancing so XD
c) and yes again, you're gonna have to add 2 in front of HCl bcuz of the same reason as b).
d) D is definitely a special case bcuz, Fe3+ with O2, so well if you do the cross multiplication technique you'll automatically get Fe2O3. Yas that's it.
English is not my first language so it's hella tuff to explain it to you from in much more detailed perspective T-T Sorry (´∩｡• ᵕ •｡∩`)
In this experiment you are directed to add a limited amount of NaOH (aq) and then an excess amount. A similar strategy will be used with the addition of NH3(aq). Why? Group of answer choices Both NaOH and NH3 are weak bases. Both NaOH and NH3 are strong bases. Initially a metal hydroxide may form which becomes soluble when more base is added and the metal complex forms. Insoluble metal complexes are first formed which then are replaced by insoluble metal hydroxide precipitates. Initially a complex ion may form which becomes insoluble when more base is added and the metal hydroxide precipitate forms.
The reason for adding a limited amount and then an excess amount is that initially a metal hydroxide may form which becomes soluble when more base is added and the metal complex forms.
In qualitative analysis is a common to add the base in drops and then in excess. When added in drops, the metal hydroxide is formed. This metal hydroxide is often insoluble.
After this metal hydroxide is formed, the base could be added in excess such that the metal hydroxide dissolves in the excess base by forming a complex.
For instance;
CuCl2(aq) + 2NaOH(aq) -------> Cu(OH)2(s) + 2NaCl(aq)
Cu(OH)2(s) + 2OH^-(aq) -------> [Cu(OH)4]^2+(aq)
Learn more: https://brainly.com/question/1527403
which of the materials above are mixtures
Answer:
Even though i cannot see the image, In chemistry, a mixture is a material made up of two or more different chemical substance/substances which are not chemically combined. A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.
Explanation:
What is the chemical formula for iron(11) oxide
Answer:
FeO
Explanation:
Iron(II) oxide or ferrous oxide is the inorganic compound with the formula FeO. Its mineral form is known as wüstite. One of several iron oxides, it is a black-colored powder that is sometimes confused with rust, the latter of which consists of hydrated iron(III) oxide (ferric oxide).
What is the lead concentration of a saturated solution of lead(II) sulfate containing 0.020 M Na2SO4? Ksp for PbSO4 = 6.3x10-7.
Answer:
i want to help but i d k. the answer :( sorry i couldnt help
Explanation:
Please help! I will give 100 pts and brainliest if it is good.
Answer:
group 1 element 6
group 2 element 3
group 11 element 1
group 14 element 2
group 17 element 4
group 18 element 5
Explanation:
Answer:
Explanation:
group 1 element 6
group 2 element 3
group 11 element 1
group 14 element 2
group 17 element 4
group 18 element 5
what happens when co2 dissolves in water
What is the density of a gas with a volume of 5.6 FL oz. and a mass of 37 grams?
Answer:
6.60
Explanation:
If the atomic mass of an atom is 16 and its atomic number is 7. how many
neutrons does it have?
Answer:
8
Explanation:
What is the atomic mass of Helium
Answer:
4.002602 u
Explanation
Answer:
4.002602 u
Explanation: