Using the following standard reduction potentials,
Fe3+(aq) + e- →Fe2+(aq) E° = +0.77 V
Ni2+(aq) + 2 e- →Ni(s) E° = -0.23 V
calculate the standard cell potential for the galvanic cell reaction given below, and determine whether or not this reaction is spontaneous under standard conditions.
Ni2+(aq) + 2 Fe2+(aq) → 2 Fe3+(aq) + Ni(s)
a) E° = -1.00 V, spontaneous
b) E° = +1.00 V, nonspontaneous
c) E° = +1.00 V, spontaneous
d) E° = -1.00 V, nonspontaneous

Answer:

Explanation:

The skeleton equation for the complete combustion of propane (C3H8) is:

C3H8 + O2 -> CO2 + H2O

The balanced chemical equation for the complete combustion of propane (C3H8), including all states of matter, is:

2 C3H8 (g) + 9 O2 (g) -> 6 CO2 (g) + 8 H2O (g)

In this equation, the propane (C3H8) is in the gaseous state, and the oxygen (O2) and the products (CO2 and H2O) are also in the gaseous state. This equation shows that when propane (C3H8) undergoes complete combustion, it reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) as products. The coefficients in front of each chemical species indicate the number of moles of each substance that are involved in the reaction.

11.935 grams of dinitrogen monoxide (g) is formed during the given reaction.

Reaction of the given question is:

 [tex]NH_4NO_3 (aq) - > N_2O (g) + 2H_2O (l)[/tex]

So according to Stoichiometry on complete decomposition of ammonium nitrate (aq)  same number moles of  dinitrogen monoxide (g) will be formed i.e if of ammonium nitrate (aq) have x moles initially then after complete reaction x moles of dinitrogen monoxide (g) will be formed.

so in order to calculate number of moles of [tex]NH_4NO_3[/tex] we will divide given mass of [tex]NH_4NO_3[/tex]  with the molar mass of [tex]NH_4NO_3[/tex].

let number of moles of [tex]NH_4NO_3[/tex] be x

given mass of [tex]NH_4NO_3[/tex] is 21.7 grams

then  x = [tex]\frac{given mass (NH_4NO_3)}{molar mass(NH_4NO_3)}[/tex]

molar mass of [tex]NH_4NO_3[/tex] = 14 + 1*4 +14 +3 *16

=> 14+4+14+48

=>80 grams

x= [tex]\frac{21.7}{80}[/tex]

so x = 0.27125

so moles of [tex]N_2O[/tex] formed = 0.27125

mass of [tex]N_2O[/tex] formed = 0.27125 * molar mass of [tex]N_2O[/tex]   --- (i)

molar mass of [tex]N_2O[/tex] = 2* 14 +16

=>28+16

=>44 grams

putting the value in equation (i)

mass of [tex]N_2O[/tex] formed = 0.27125 * 44

=>11.935

so mass of [tex]N_2O[/tex] formed = 11.935 grams

To know more about chemical reaction click on below link:

https://brainly.com/question/29039149#

#SPJ4

If Antacid tablet weighed 1.6 grams the 0.015 moles of gastric acid will neutralized.

Antacids neutralize the gastric acid in stomach by stopping an enzyme that creates acid to break down food for digestion. The antacids act by neutralizing the acid in the stomach and by inhibiting pepsin which is a proteolytic enzyme.

1 gram Antacid neutralized HCL = 0.342 gram

This is calculated from the expression for equivalence point in the titration.

1.6 gram Antacid neutralized HCL is,

(  0.342gram HCL/  1 gram antacid ) . 1.6 gram antacid

= 0.5472 gram

Molar mass of HCL = 36.5 gram

Moles of HCL = 0.5472 gram / 36.5 gram = 0.01499

so, the moles of HCL is 0.015 mole.

To learn more about Neutralizing Antacids please visit:

https://brainly.com/question/5328009

#SPJ4

Answer:

2

Explanation:

We use regent DCC and [tex](CH_3)_2NH[/tex]

As per the details share in the above question are as follow,

Following are the list of reagents and conditions to efficiently synthesize.

To convert,

cyclopentand to cyclopentylamine.

cyclopentand the chemical formula [tex]C_5H_{10}[/tex] and CAS number 287-92, cyclopentane is a very combustible alicyclic hydrocarbon that is made up of a ring of five carbon atoms that are each connected to two hydrogen atoms above and below the plane. It appears as an odourless liquid with a hue similar to petrol.

cyclopentylamine

We have to oxidation the PCC.

First we have to convert cyclopentanol to cyclopentanone.

Hence we use the regent d and c .

For more such question on efficiently synthesize.

https://brainly.com/question/29559115

#SPJ4

Note : Question will be ,Use the following list of reagents and conditions to efficiently synthesize the product on the right from the starting material on the left. a Br2, FeBr3 b [1] LIAIH4, [2] H20 c (CH3)2NH, DCC d PCC e NaCN, HCI f (CH3)2NH, NaBH3CN g H2, Pd-C h NaNO2, HCI i Cul j CuCN k H2PO2 l HBF4

Enter your answer as a list of steps separated by semicolons, for example: a;b;c

Silica serves as the stationary phase in tlc chromatography, while liquid serves as the mobile phase.

Separate mixture's constituent parts by chromatography is a method. This mixture gets dissolved in a material known as the mobile phase to start the process, which then transports it through a material known as the stationary phase.

Chromatography enables precise separation, analysis, and purification. Very little sample volume is needed. It works with a variety of materials, including tissue extracts, plastics, food particles, pesticides, medicines, and food particles.

To know more about chromatography visit:

brainly.com/question/14250736

#SPJ4

For more than 150 years, nitrous oxide has been used as a clinical anesthetic. When combined with an anesthetic gas scavenging system, an efficient room heating, ventilation, and air conditioning system.

This Alert provides control strategies for preventing or significantly reducing N2O exposure during anesthetic gas administration. The danger of anesthetic toxicity has been proven to be decreased by epinephrine's ability to prolong sensory nerve blockage and delay local anesthetics' absorption into the body. In some circumstances, additions like tramadol, buprenorphine, dexamethasone, and clonidine seem to work well. N2O is employed as an anesthetic agent* in veterinary, medical, and dental operating rooms. Additionally, this gas is used to nitrate alkali metals, oxidize organic molecules, and foam whipped cream.

to know more about nitrous oxide please visit.

https://brainly.com/question/9835041

#SPJ4

Answer:

The products in the reaction are Fe and CO2. Fe2O3, also known as iron(III) oxide, reacts with CO to produce iron (Fe) and carbon dioxide (CO2). The CO and Fe2O3 are the reactants in the reaction.

Explanation:

In a chemical reaction, reactants are the substances that are combined to produce a new substance or substances. In this case, the reactants are Fe2O3 and CO, which are combined to form the products Fe and CO2. A product is the substance that is formed as a result of the chemical reaction. In this reaction, Fe and CO2 are the products.

The products of the reaction are Fe and CO2. Fe2O3, also known as iron(III) oxide, reacts with CO to make iron (Fe) and carbon dioxide (CO2). The CO and Fe2O3 are the reactants in the reaction. Therefore, option C is correct.

The term chemical reaction is defined as a process in which one or more substances, also called reactants, are converted to one or more different substances, called as products.

A chemical reaction rearranges the constituent atoms of the reactants to produce various products. The properties of the products differ from the properties of the reactants.

Reactants are the substances that combine in a chemical reaction to produce a new substance or substances. The reactants in this case are Fe2O3 and CO, which combine to form the products Fe and CO2. The substance formed as a result of the chemical reaction is referred to as a product. The products of this reaction are Fe and CO2.

Thus, option C is correct.

To learn more about the chemical reaction, follow the link;

https://brainly.com/question/29762834

#SPJ2

The carboxylic acid initially transforms into an ammonium salt, which, when heated, yields an amide. Solid ammonium carbonate is added to an excess of acid to create the ammonium salt.

For instance, ammonium ethanoate is produced by mixing too much ethanoic acid with ammonium carbonate.

2CH3COOH+(NH₄)2CO₃→2CH₃COONH₄+H₂O+CO₂(1)

When the reaction gets completed, the mixture is heated and the ammonium salt dehydrates producing the ethanamide.

CH₃COONH₄→CH₃CONH₂+H₂O

The extra ethanoic acid is needed to stop the ammonium salt from dissociating before it dehydrates. When heated, ammonium salts frequently separate into ammonia and the parent acid, then come back together when cooled. In this scenario, ammonia would escape from the reaction mixture and be lost if dissociation occurred. There could be no recombination. Dissociation can be reversed:

CH₃COONH₅(s)⇌CH₃COOH(l)+NH₃(g)

The presence of the excess ethanoic acid helps to prevent it from happening by moving the position of equilibrium to the leftside of the reaction.

To know more about conversion of carboxylic acid, please refer:

https://brainly.com/question/26723105

#SPJ4

These alkynes are anticipated to ozonolyze to form the following two compounds: 2,2-dimethyl-3-hexyne.

A compound is a material that is created when two or more distinct chemical components are mixed in a certain proportion. When the elements come together, they interact and create chemical connections that are hard to break. The sharing or trading of electrons between atoms results in the formation of these bonds.

A material that has been chemically bonded together from two or more distinct components. Water (H2O), which is a combination of the elements hydrogen and oxygen, and table salt (NaCl), which is a composite of the elements sodium and chloride, are two examples of compounds.

To know more about Compounds visit:

https://brainly.com/question/14117795

#SPJ4

A chemical that was transferred from pathogenic to nonpathogenic bacteria is what the data show to be the most convincing.

Bacteria that can cause disease are known as pathogenic bacteria. The pathogenic bacteria for humans are the main topic of this essay. The majority of bacterial species are benign and frequently helpful, but others can spread infectious illnesses. Less than 100 of these pathogenic species are thought to exist in humans.

They contain elements that facilitate bacterial adhesion to and invasion of cells and tissues. Some bacteria can easily avoid the body's defenses, while others create poisons that lead to symptoms and disease. The virulence factors that are produced are precisely controlled and regulated.

Pathogenic bacteria examples include:

E. coli is a bacteria that causes intestinal infections that manifest as fever and diarrhoea.

To learn more about pathogenic bacteria. Please visit the below link.

https://brainly.com/question/17967098

#SPJ4

The calcium molecule undergoes oxidation while zinc molecule undergoes reduction during the redox reaction.

What is redox ?

It is a type of reaction in which there is an exchange of electron between two reactant species. During which one reactant under reduction and the other reactant undergoes oxidation.

Let the atoms in it ionic form-

[tex]Ca (s) + Zn^{2+} (aq)[/tex] →  [tex]Zn (s) + Ca^{2+} (aq)[/tex]

Oxidation :

[tex]Ca (s)[/tex] → [tex]Ca^{2+} (aq) + 2e^{-}[/tex]

Reduction :

[tex]Zn^{2+} (aq) + 2e^{-}[/tex] → [tex]Zn (s)[/tex]

Hence we can see that in the following redox reaction, calcium changes its oxidation state from 0 to +2 and zinc changes its oxidation state from +2 to 0 as it undergoes reduction.

To learn more about redox click here:

https://brainly.com/question/459488

#SPJ4

Answer: 2.4 x 0.5 = 1.2 grams

Explanation:

The correct option is C Osmotic pressure

Only Osmotic pressure is a colligative property.

What is Osmotic pressure?

Osmosis is the process by which water moves from a region with a low concentration of solute to one with a greater concentration. Atoms, ions, or molecules dissolved in a liquid are known as solutes. The total amount of particles dissolved in the fluid determines the rate of osmosis. The rate of osmosis increases with the number of particles that dissolve.

Water will go to the region with the highest solute concentration if a membrane is present. The pressure produced by water across a membrane as a result of osmosis is known as osmotic pressure. The osmotic pressure rises in direct proportion to the amount of water crossing the membrane.

Learn more about Osmotic pressure from given link

https://brainly.com/question/25904085

#SPJ4

A 14.585 g sample of CaCl2 was added to 12.283 g of K2CO3 and mixed in water. A 3.573 g yield of CaCO3 was obtained., Limiting reagent is K2CO3,percent yield of CaCO3 = 40.20 %

molar mass of CaCO3 = 100.0869 g/mol ,then 0.0888 mole  = 0.0888 \times 100.0869 = 8.8877 gm. 8.8877 of CaCO3 is theoritical yield = 100% yield then 3.573 gm =3.573 \times 100 /8.8877 = 40.20 %,percent yield of CaCO3 = 40.20 %. Limiting reagents are drugs that are totally engulfed when a chemical reaction is completed. They are also recognised as limiting reactants or limiting agents. A set sum of reagents is needed for the finalisation of a chemical reaction, according to stoichiometry. Excess reagents are limiting reactant that aren't absorbed when a chemical reaction is finished. The limiting reagent is the reactant that has totally used up or responded since its quantity restricts the number of products formed.

Learn more about Limiting reagents here:

https://brainly.com/question/11848702

#SPJ4

Double displacement response will shape a precipitate if the only of the goods is insoluble in water.

The solubility guidelines offer a listing of cations and anions that if blended the ensuing compound is both soluble or insoluble. The response equations between K+ and the 3 answers are given below.

Read more about solutions;

https://brainly.com/question/25326161

#SPJ4

Ernest Rutherford model :- Rutherford directed the Geiger-Marsden experiment in 1909 which suggested upon Rutherford's 1911 analysis  , that Thomsan' plum pudding model of the atom was incorrect.

Rutherford's new model for atoms based on the experimental results ,contained new features of relatively high central charge concentrated into a very small volume un comprision to rest of the atom and with this central volume also containing the bulk of atomic mass of the atom. This region would be known as nucleus.

Rutherford's experiment:- A famous  experiment "gold foil experiment" in which Rutherford observed that the the atom has a tiny and heavy nucleus. He designed an experiment to use the alpha particles emitted by radioactive element. He saw that most of the beams went straight through the foil but a few were deflected.

Rutherford propose his own physical model for sub atomic structure on the basis of his experimental observation. In this, the atom is made up of a central charge surrounded by cloud of orbiting electrons. Later the region of Central charge names as nucleus. Rutherford didn't use the word nucleus.

After Rutherford's discovery scientists started to realise that the atom is not a single particle, but it is made up of far smaller subatomic particles. Scientists eventually discovered that atoms have positively charged nucleus in the center.  Later scientists also found expected number of electrons in atom by using x-ray.

Learn more about atom here:

https://brainly.com/question/6258301

#SPJ4

The energy of a photon of radiation with a frequency of 9.50 × 10¹³ Hz is 6.3 × 10⁻²⁰ J.

The Energy that comes from electromagnetic radiation is quantized, It exists in the form of small energy packets known as photons.

The energy of a photon is depends on the frequency at which it propagates from radiation source.

We can calculate the energy of a photon by the equation given below:

E = hν

where, E is the energy of photon

h is Plancks's constant whose value is 6.626 × 10⁻³⁴ Js

ν is the frequency of the radiation.

According to the question,

given,

frequency ν = 9.50 × 10¹³ Hz

therefore,

E = 6.626 × 10⁻³⁴ Js ×  9.50 × 10¹³ Hz      (∵1 Hz = 1s⁻¹)

E = 6.2947 × 10⁻²⁰ J

E≈ 6.3 × 10⁻²⁰ J

Thus, energy of the photon is 6.3 × 10⁻²⁰ J

To know more about energy of photon here

brainly.com/question/25746629

#SPJ4

The perfect ideal gas equation (PV = nRT) relates the macroscopic residences of perfect gases and thus here the mass of argon is contained in the cylinder is 9.70 kg.

Use the proper fueloline regulation, PV=nRT.

0.08206 L*atm*K-1mol-1 for R, the ideal gas constant.

That approach we want to transform psi to atm via way of means of multiplying 1990 psi via way of means of (1atm/14.7psi).

That offers us a stress of a hundred 35.4 atm Convert 24.7C to Kelvin via way of means of including 273.15.

We want moles for you to calculate the mass of argon, Ar by n = PV/RT.

I get 242.7 moles Ar as about 1 mole occupies 22.4 L at STP, and that we've a stress this is 135 instances better than 1 atm.

Now that we've moles Ar, we will convert that into mass via way of means of multiplying via way of means of argon's molar mass of 39.95g/mole.

Now we get 9695 grams (9700 grams with three sig figs), or 9.70 kg, with three sig figs.

Read more about moles:

https://brainly.com/question/25736513

#SPJ4

If an electron in a hydrogen atom changes from an energy level with primary quantum numbers to the n=2 state, emitting a photon with a wavelength of 434 nm, the value of ni is five.

what does Rydberg's equation explains?

The wavelength of light produced by an electron transitioning between atomic energy levels is predicted by the Rydberg formula. There is just one spectral fingerprint for each element. Light is created when an element is heated in its gaseous state. Bright lines of different colours can be seen when this light filters through a prism or diffraction grating. Each component stands out from the others in some way.

According to the question:

To know more about Rydberg's equation:

https://brainly.com/question/13185515

#SPJ4

True , transition metal ions regulated oxygen evolution reaction performance of ni-based hydroxides hierarchical nanoarrays.

Transition metals are part of the d block, which means that the d sublevel of electrons is being filled with up to ten electrons. Many transition metals are incapable of losing enough electrons to achieve the noble-gas electron configuration. Ions are formed when transition metals lose s electrons. Transition metals produce a variety of ions with varying charges. The electrons in the's' orbital have more energy than the electrons in the 'd' orbital. As a result, removing those two electrons becomes much easier. As a result, the transition metal can easily form ions with a +2 charge.

Learn more about Transition metals here:

https://brainly.com/question/29828769

#SPJ4

Acetic acid is a strong acid because its PKa value is lower, Acetate is its conjugate base, At equilibrium, the product will be dominant. as the acid-base reaction produces conjugate base and water

In an aqueous solution, strong acid is completely distanced. It is a chemical substance with a high proton loss capacity, H+. A strong acid loses one proton in liquid, which is managed to capture by liquid and forms the order to accurately describe ion: HA(aq) + H2O H3O+(aq) + A (aq) In an aqueous solution, a strong acid is totally ionised. In an aqueous solution, a weak acid is one that ionises only mildly. Strong acids, including such hydrochloric acid, have a pH of 0 to 1 at the concentrations commonly used in laboratories. The greater the amount of hydrogen ions present in the solution, the lower the pH.

learn more about strong acid here:

https://brainly.com/question/16749233

#SPJ4

There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, there is a large difference between (β −) decay and (β +) decay.

Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.

A neutron decays into a proton in beta minus (β −) , an electron and an electron antineutrino are produced. A proton decays into a neutron in beta plus (β +) , a positron and an electron neutrino are produced. Positron emission is another name for the β + decay.

Therefore, there is a large difference between  (β −) decay and (β +) decay.

To know more about nuclear decay, here:

https://brainly.com/question/21114779

#SPJ1

The part of the proper calculation of the mass % of O in acetic acid is option B. % O = 53.29%

The mass of oxygen atoms in a mole of acetic acid is 32.00 g.

The molar mass of acetic acid is 60.05 g/mol.

Calculation :

2×16.00

% O = --------- × 100 = 53.29%

60.05

Acetic acid is used as a food preservative and food additive (known as E260). Large amounts of acetic acid are used in the manufacture of products such as textile inks, dyes, photographic chemicals, pesticides, pharmaceuticals, rubber and plastics. It is also used to remove scale with some household cleaners.

Acetic acid is he second simplest carboxylic acid after formic acid. It is an important chemical reagent and an industrial chemical mainly used in .

Learn more about acetic here : https://brainly.com/question/24304533

#SPJ4

If any of the ions comprising an insoluble ionic solid remain in the solution, The solution must be supersaturated.

Known as a saturated solution, this fluid is created when the maximum amount of solute dissolves at a specific temperature. A solution is said to be supersaturated if there is more solute present than is necessary to reach saturation.

By adding a tiny amount of solute, you can quickly determine if a solution is saturated, supersaturated, or neither. The solute will dissolve in a solution that is not saturated. That is not the case if the solution is saturated. The solute you've added will rapidly form crystals if the solution is supersaturated.

Supersaturation is a non-equilibrium physical state where a solution contains more solute than the equilibrium solubility permits under the circumstances, such as the system's temperature and pressure.

For more information on supersaturation kindly visit to

https://brainly.com/question/16817894

#SPJ4

in the following nuclei. part a 5624mn2456mn is number of protons  = 24 and number of neutrons  = 56 - 24 = 32

fozrmula to calculate protons and neutron are atomic number  = number of protons , mass number  =  number of protons  + number of neutrons With the exception of simple hydrogen, neutrons are subatomic particles found within the nucleus of all atoms. The pseudonym of the particle stems from the fact that it lacks any electrical charge; it is neutral. Neutrons have an extremely high density. A proton is an elementary particle discovered in every nucleus of the atom. The atom has a positive charge that is equivalent to and contrary to the electron's. A single proton has a mass of only 1.673? 10-27 kilogramme if secluded, which is mildly smaller than the mass of a neutron. Offsetting the atomic number as from atomic mass yields the number of neutrons in an atom.

Learn more about protons here:

https://brainly.com/question/12535409

#SPJ4

Pre-exponential factor can be obtained from the Arrhenius pre-factor and using this we can calculate the classical rate of proton transfer.

Pre-exponential factor (A) is an important component of the Arrhenius equation, which was formulated by the Swedish chemist Svante Arrhenius in 1889. The pre-exponential factor is also known as the frequency factor. It represents the frequency of collisions between reactant molecules at a standard concentration.  it is actually dependent on temperature because it is related to molecular collision, which is a function of temperature. because the pre-exponential factor depends on frequency of collisions, it is related to collision theory and transition state theory. The collision theory deals with gases and neglects to account for structural complexities in atoms and molecules.

To learn more about Arrhenius exponential factor please visit:

https://brainly.com/question/14781395

#SPJ4

Some functional groups contain a heteroatom, Some functional groups contain a multiple bond, some functional groups contain both a heteroatom and a multiple bond. these statements correctly describe functional groups.

functional group in organic chemistry is a substance or amide in a particle that creates the molecule's distinctive feature chemical reactions. Regardless of the rest of the molecule's composition, the same functional group will undergo the same or similar chemical reactions. Functional groups are collections of one or more atoms that have distinct chemical properties regardless of what they are attached to. Covalent bonds communicate the particles of functional groups to each other and to the remainder of the molecule. All life processes, such as nourishment, excretion, and respiration, can be carried out by a cell. As a result, it is known as the functional unit of life. All living beings are made up of cells, which are the smallest unit of life.

Learn more about functional group here:

https://brainly.com/question/14618322

#SPJ4

Ammonium chloride will be the solution that separates aqueous barium ion and aqueous lead(II) ion out of the six solutions.

What is the described solution?

A solutions is any combination of one or more solutes that have dissolved in a solvent. A solute must dissolve in a solvent to produce a homogenous solution. A component must dissolve in a solution to produce a homogeneous mixture.

What exactly is a water solution?

A homogenous molecular mixture of two or more substances is referred to as a solution (uniform throughout). In this context, aquous solution, often known as a solution of water, refers to water functioning as a solvent. For example, the solute is salt and the solution is water in a mixture of salt and water.

To know more about solution visit:

https://brainly.com/question/1416865

#SPJ4

The equivalence point is reached after adding 20.77 mL of base. The molar mass of unknown acid is 60 g/mol

given that :

mass of the monoprotic acid = 0.125 g

molarity of NaOH = 0.1003 M

volume = 20.77 mL = 0.02077 L

the number of moles = molarity × volume in L

                                   = 0.1003 × 0.02077

                                   = 0.00208 mol

moles = mass / molar mass

molar mass = mass / moles

                    = 0.125 g / 0.00208 mol

                    = 60 g /mol

Thus, A 0.125-gram sample of a monoprotic acid of unknown molar mass is dissolved in water and titrated with 0.1003 M NaOH. The equivalence point is reached after adding 20.77 mL of base.  the molar mass of the unknown acid is 60 g/mol.

To learn more about molar mass here

https://brainly.com/question/24129148

#SPJ4