Use your own personal example of a decision you made and write a reflection
about ethical reasoning. Please keep in mind that your classmates will be seeing
this post. Don't choose a decision that is too personal for others to read. Discuss
the following questions in your reflection:
What if everyone made decisions like this?
What if you were the "other person" in your problem? How would you feel about
your decision?
What if you were in a different but similar situation? Would your decision be
different?
Comment on some of the entries of your classmates. Refer to the discussion rubric
for guidance.

Answers

Answer 1

Answer:

Use the own word element

Explanation:

Dont choose a decision that is too personal for others to read.


Related Questions

what is the resonance frequency if the capacitor value is doubled and, at the same time, the inductor value is halved?

Answers

The resonance frequency will remain the same if the capacitor value is doubled and, at the same time, the inductor value is halved.

The resonant frequency is a term used to describe the oscillation of a system at its natural or unforced resonance.

In an LC circuit, the resonance frequency can be determined by the following equation;

ω = 1 / √LC

Here L represents the inductor value and C illustrates the value of the capacitance.

If the capacitance is doubled, C'=2C, and the inductance is halved, L'=L/2, then;

ω = 1 / √L'C'

ω = 1 / √(L/2) × (2C) = 1 / √LC = ω

Therefore the frequency of resonance is equal to the original value.

To learn more about resonance frequency; click here:

https://brainly.com/question/13040523

#SPJ4

a car with the windows rolled down is traveling north on a road at a speed of 23.0 m/s. a police car, traveling south at a speed of 38.0 m/s, approaches with its siren producing sound at a frequency of 2400 hz. (enter your answers in hz. assume that the speed of sound in air is 343 m/s.) (a) what frequency does the driver of the car observe as the police car approaches? (enter your answer to the nearest integer.) hz (b) what frequency does the driver of the car detect after the police car passes her? hz (c) repeat parts (a) and (b) for the case when the police car is traveling northbound. while police car overtakes hz after police car passes hz

Answers

a) The frequency that the driver of the car observes as the police car approaches is calculated by using the Doppler effect.

The frequency of the sound wave is increased as the source of the sound (the police car) approaches the observer (the driver of the car). The frequency observed by the driver of the car is given by:

f_observed = f_source * (v_source + v_observer) / (v_source - v_observer)

Substituting the given values, we get:

f_observed = 2400 * (38 + 23) / (38 - 23) = 4860 Hz (to the nearest integer).

b)  The frequency of the sound wave is decreased as the source of the sound (the police car) moves away from the observer (the driver of the car). The frequency observed by the driver of the car is given by:

f_observed = f_source * (v_source - v_observer) / (v_source + v_observer)

Substituting the given values, we get:

f_observed = 2400 * (38 - 23) / (38 + 23) = 1380 Hz (to the nearest integer).

c)The frequency of the sound wave is decreased as the source of the sound (the police car) approaches the observer (the driver of the car). The frequency observed by the driver of the car is given by:

f_observed = f_source * (v_source - v_observer) / (v_source + v_observer)

Substituting the given values, we get:

f_observed = 2400 * (38 - 23) / (38 + 23) = 1380 Hz (to the nearest integer).

The frequency of the sound wave is increased as the source of the sound (the police car) moves away from the observer (the driver of the car). The frequency observed by the driver of the car is given by:

f_observed = f_source * (v_source + v_observer) / (v_source - v_observer)

Substituting the given values, we get:

f_observed = 2400 * (38 + 23) / (38 - 23) = 4860 Hz (to the nearest integer).

For more questions like  Doppler effect click the link below:

https://brainly.com/question/21408768

#SPJ4

y how much does the gravitational potential energy of a 59- kg pole vaulter change if her center of mass rises about 4.0 m during the jump?

Answers

The gravitational potential energy of a 59 kg pole vaulter changes by 2360 J if center of mass rises by 4.0 m during the jump.

The gravitational potential energy is the energy in an object due to change in its position. To say in simple terms, this energy is related to gravitation force. This energy does not depend on the path, but depends on the height to which an object is raised.

The formula for finding gravitational potential energy acquired by an object that is raised to a height "h" is

E=mgh

So, we have,

E= 59×10×4

= 2360 J

The potential energy gained by the pole vaulter is 2360 J.

To know more about potential energy here

brainly.com/question/28871953

#SPJ4

can you help me with this puzzle with a decoder ring
BDONC,ZVP has to be all lower case

Answers

solve today's free puzzle, you will need your Morse Code Decoder Ring from last week. This puzzle is a list of words that are related in some way. Can you decode them all and figure out their relationship?

This puzzle would be great for kids 8 and older. If you need help constructing the decoder, click here.

post signature

The Puzzle Den at 11:31 AM

Share

No comments:

an electron travels with velocity in a region where the magnetic field is t. what is the force on the electron?

Answers

An electron experiences a force of constant magnitude that is always pointed perpendicular to its velocity since the force is F=qvB in a constant magnetic field. The electron will move in a circular orbit.

What is a Magnetic field?

Magnetic fields surround permanent magnets and current-carrying conductors because of the movement of electrical charge.

What is an Electron?

A negatively charged subatomic particle known as an electron can either be free or attached to an atom. One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons together.

Hence, an electron experiences a force of constant magnitude that is always pointed perpendicular to its velocity since the force is F=qvB in a constant magnetic field. The electron will move in a circular orbit.

To know more about magnetic fields, check out:

https://brainly.com/question/14411049

#SPJ4

an object is released from rest and falls a distance h during the first second of time. how far will it fall during the next second of time?

Answers

It fall during the next second of time is 3hrs.

When something is released from rest and falls?

Gravitational potential energy is transformed into kinetic energy as the object is propelled out of rest and falls to Earth. Since the object is released closer to the Earth's surface, the force of gravity's acceleration is constant.

Knowing this

u = 0 m/s.

velocity after t = 1s

v = u+gt

v = 0 + 9.81 x 1s

v = 9.81 m/s

area covered in the first second

area covered in the first second = ut + 0.5 x g x t²

area covered in the first second =0 + 0.5x 9.81 x 1 = 4.90m

Let 4.90 be h

We will now use the distance traveled in the second second.

so that velocity after t = 1s

velocity after t is 1s = 1 x t+ 0.5 x g x t²

velocity after t is 1s = 9.81 x 1 + 0.5 x 9.81 x 1 = 3 x 4.90

So since h= 4.90

Then the answer is 3 x h = 3h.

To know more about distance visit:

https://brainly.com/question/17251356

#SPJ4

what best describes the camera motion in the scenes directly prior to the old man's defiant hand gesture?

Answers

Static and secured in a tripod best describes the camera motion in the scenes directly prior to the old man's defiant hand gesture.

How important is a hand gesture while capturing photographs ?

One of the hardest things for a photographer to do is to take steady, sharp pictures. Even if we like the spontaneity of point-and-shoot photography, shaky hands can reduce the overall caliber of your pictures.

A beautiful shot is made up of many crucial elements. The ability to capture the ideal lighting, composition, and moment—the three components of a great image—is among the most crucial.

You may capture the ideal sunrise or sunset with the use of a tripod, which lowers camera movement and enhances image quality.

To know more about photography you may refer to :

https://brainly.com/question/27844075

#SPJ4

if an external factor is the motivating force to reach a goal, it falls into the theoretical category of being:

Answers

Theoretically, extrinsic motivation is what occurs when an external factor serves as the driving force behind the pursuit of a goal.

Extrinsic motivation: what is it?

If an individual is motivated on rewards or other elements, such like praise, fame, or money, this is known as extrinsic motivation. Unlike intrinsic motivation, this kind of motivation is not motivated by internal causes. One example of an extrinsic motivation is receiving payment for completing a task.

The significance of extrinsic motivation:

Extrinsic motivation is significant because it can be a useful tool for changing behavior. People are usually motivated to behave in particular desirable ways when there is a chance of receiving awards or sanctions from outside sources.

To know more about Extrinsic motivation visit:

https://brainly.com/question/1658150

#SPJ4

a toroidal inductor with an inductance of 91.0 mh encloses a volume of 0.0200 m3. if the average energy density in the toroid is 55.0 j/m3, what is the current through the inductor?

Answers

When a toroidal inductor with an inductance of 91.0 mh encloses a volume of 0.02m^3 then the current through the inductor is calculated as 4.91 A.

What is inductance?

The tendency of an electrical conductor to oppose change in the electric current flowing through it is called inductance.

As we know, the magnetic energy stored in the toroid is;

U = 1/2 * L i²

Here, L -- inductance and i -- current

Average energy density, u = B²/2μ

U = u V

Here V is volume, = 0.02 m^3

Given L = 91.0 mH;  u=  55.0 j/m3 and V= 0.02 m^3

i = √2u V/L

= √ 2* 55 * 0.02 /91 *10^-3

Current, i = 4.91 A

To know more about inductance, refer

https://brainly.com/question/7138348

#SPJ4

what would be the distance between fringes (in cm) if the entire apparatus were submersed in water, whose index of refraction is 1.333?

Answers

The distance between fringes for 694nm is 3.267 cm and for apparatus submersed in water with index of refraction of 1.333 is 2.45cm.

In the Young’s Double Slit Experiment, the distance between adjacent fringes is Δy = xλ/d, assuming the slit separation d is large compared with λ.

The equation for the distance between fringes is given by:

Δy = xλ/d  where x is the location of screen and d is slit separation. λ is the wavelength.

According to the given information,

x = 4m

d = 0.0850mm or 0.085 x 10^-3m

λ = 694 nm or 694 x 10^-9 m

Hence, using the equation, the distance between fringes is:

Δy = 4 * 694 x 10^-9 /0.085 x 10^-3 = 0.032658 m = 32.66mm = 3.267 cm

When submerged in water, wavelength in water is given by:

wavelength in water = wave length / refractive index

The refractive index of an optical medium is a dimensionless number that gives the indication of the light bending ability of that medium. The refractive index of water is 1.333.

wavelength in water = 694/1.333 = 520.63 nm

Hence, the new distance between fringes is

Δy = 4 * 520.63 x 10^-9 /0.085 x 10^-3 = 0.0245 m = 24.5mm = 2.45 cm

Note: The question is incomplete. The complete question probably is: Using the equation for the distance between fringes, Δy = xλ/d , complete the following. (a) Calculate the distance (in cm) between fringes for 694 nm light falling on double slits separated by 0.0850 mm, located 4.00 m from a screen. cm (b) What would be the distance between fringes (in cm) if the entire apparatus were submerged in water, whose index of refraction is 1.333? cm

Learn more about Young’s Double Slit Experiment:

https://brainly.com/question/15715225

#SPJ4

2Na(s)+Cl2(g)>2NaCl(s) the equation represents a chemical change because

Answers

2Na (s)+Cl₂ (g) → 2NaCl(s) the equation represents a chemical change because it is a synthesis reaction.

What is synthesis reaction?

When two or more substances (elements or compounds) react to generate a new product, which is a compound with new qualities. They synthesis to create a new material, therefore the name "synthesis reaction."

Synthesis reactions occur when two separate atoms or molecules interact to generate a new molecule or substance. When a synthesis reaction happens, most of the time energy is released and the process is exothermic.

The typical equation for this sort of reaction is A + B → AB. The reaction of sodium (Na) with chlorine (Cl) to form sodium chloride is an example of a synthesis reaction (NaCl).

To know more about synthesis reaction refer to:

https://brainly.com/question/16560802

#SPJ1

A 2 kg bird falls from a 15 m high tree. How fast is the bird falling right before it hits the ground?

Answers

v^2= v0^2 + 2a*dx
v - instantaneous velocity (velocity at the moment)
v0 - initial velocity
dx - total displacement
a - acceleration
We should find v from this formula

As the bird is falling from the tree, initially it doesn’t have any velocity, so v0=0

When the bird will hit the ground, its total displacement will be 15m, so dx = 0

The acceleration here is equal to the gravitational acceleration (g) = 9.8

So if we will plug in our values to this formula:
v^2=0+2*9.8*15=294
v=17.15 m/s (this answer depends on whether you take g=9.8 or g=10)


Btw, mass doesn’t affect the acceleration and the velocity

the device pictured in the figure entertains infants while keeping them from wandering. the child bounces in a harness, with a spring constant k, and is suspended off of the ground.

Answers

It is possible to think about angular frequency (ω) as a way to measure angular displacement with respect to time. The equation is (K= ω/m)

Additionally known as radial or circular frequency. It can sometimes be measured in radians per second and sometimes in degrees per second.Angle frequency can be thought of as the rate at which the phase of a sinusoidal waveform changes. It can gauge how quickly the argument changes in relation to the sine function.

ω=km

We are aware that k is unchanging.

Then, we can change the formula's k subject to (K= ω/m).

To know more about angular frequency

https://brainly.com/question/27177422

#SPJ4

A motorcycle being driven on a dirt path hits a rock. Its 50-kg cyclist is projected over the handlebars at 15 m/s into a haystack. If the cyclist is brought to rest in 0. 5 second, the magnitude of the average force exerted on the cyclist by the haystack is.

Answers

The magnitude of the average force is -1.5×10³ N.

What is force?

A force is any action that seeks to preserve, modify, or deform a body's motion.

We know,

The magnitude of the average force is:

F = m(v-u)/t

F = Average force

m = mass of the cyclist

v = Final velocity

u = Initial velocity

t = time.

Putting values into the formula

F = 50(0-10)/0.5

F = -1500 N

F = -1.5×10³ N

The negative sign is the force act against the motion of the cyclist.

To know more about force, check out https://brainly.com/question/12785175

#SPJ1

A skateboarder travelling at 9.5 m/s starts to travel up the side of a half pipe. Calculate the maximun height the skateboarder can reach.​

Answers

The maximum height the skateboard can reach is  is 4.6 m.

What is height?

Height is the vertical distance between two points.

To calculate the maximum height the skateboard can reach, we use the formula below.

Formula:

h = v²/2g......................... Equation 1

Where:

h = Maximum heightv = Velocityg = acceleration due to gravity

From the question,

Given:

v = 9.5 m/sg = 9.8 m/s²

Substitute these values into equation 1

h = (9.5²)/(9.8×2)h = 4.6 m

Hence, the maximum height is 4.6 m.

Learn more about height here: https://brainly.com/question/983412

#SPJ1

1. What is the atomic mass of the new atom?
2. What is the atomic number of the new atom?
3. What is the symbol of the new atom?
4. What type of decay is demonstrated here?

Answers

1. The atomic mass of the new atom be 243.  Hence, Option (e) is correct.

2. The atomic number of the new atom be 94. Hence, Option (f) is correct.

3. The symbol of the new atom be Pu.  Hence, Option (h) is correct.

4. Alpha decay is demonstrated here. Hence, Option (i) is correct.

What is Alpha decay?

A type of radioactive decay known as "alpha decay" occurs when an atomic nucleus emits an alpha particle as it changes or decays into a new atomic nucleus. Here, the newly produced atom will have a four-less atomic mass number and a two-less atomic number. A helium nucleus is another name for the alpha particle that was released. The alpha particles have a positive charge and a sizeable mass.

Ernest Rutherford investigated how radiation is deflected through a magnetic field to distinguish alpha decay from other types of radiation. Given that the particles carry a +2e charge, the alpha decay would deflect a positive charge.

Learn more about Alpha decay here:

https://brainly.com/question/27870937

#SPJ1

what is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other?

Answers

I understand your question and E=0.0693J is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other.

What is magnetic field?The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is travelling through a magnetic field.Solution:

to find the energy do as follows.

E=K 1 +K 2=0.5mv 12 +0.5mv 22 =0.5m(v 12+v 22 )

E=0.5(1.1)(0.323^2+(-0.147)^2)=0.0693J.E=0.5(1.1)(0.3232 +(−0.147)2)

E=0.0693J.

Hence, E=0.0693J is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other.

To know more about magnetic field visit

https://brainly.com/question/11514007

#SPJ4

The complete question is ;

10-kg carts on a low-friction track are rigged with magnets so that the carts repel each other when they approach each other. One cart has an initial velocity of +0.323 m/s, and the other has an initial velocity of -0.147 m/s.

What is the maximum energy stored in the magnetic field during the collision, assuming that the carts never touch each other?

scientists have recently discovered one the smallest stars on record. how long will this star last compared to a larger star formed at the same time?

Answers

Due to its lower fuel consumption, the smaller star will live longer than that of the larger star.

Who are physics scientists?

A physicist is a professional who focuses on the science of physics, which includes all of the interactions between matter and energy in the material world at all time and spatial scales. His discovery of law of the photovoltaic effect, which was a crucial step in the evolution of quantum theory, earned him the 1921 Newbery Medal.

How do scientists work?

A scientist is somebody who methodically acquires data and uses it to form hypotheses, test those assumptions, and further knowledge and understanding. A scientist's methodology, such as the use of numbers (statisticians) or data, can also be used to further characterize them (data scientists).

To know more about Scientist visit:

https://brainly.com/question/2142495

#SPJ4

1. Paxton's mom tells him that he might legally be an adult, but he is psychologically still very much a child. How is this MOST likely demonstrated in Paxton's life?
O
He has the right to vote and to buy lottery tickets.
He whines when he is asked to help with chores.
He lacks the ability to reproduce human life.
He didn't grow any body hair during puberty.

Answers

When asked to assist with tasks that MOST likely occurred in Paxton's life, he complains.

What is a another word for demonstrated?

Demonstrate is often used interchangeably with the words prove, evince, manifest, and display. Demonstrate suggests demonstrating through action or just by displaying feelings whereas all these terms mean "one reveal openly or make evident." They applauded vociferously to show their approval.

What is a demonstrated experience?

Whenever listing "Demonstrated Experience" on your resume, be sure to include the following information: (1) Whenever a skill was used, (2) Where it was used, (3) For how long, (4) How it was used, (5) Your interactions with other people while using the skill, and (6) The project's topic.

To know more about demonstrated visit:

brainly.com/question/28233712

#SPJ1

1. according to the hertzsprung-russell diagram, what type of star is the sun? a) spectral type o b) red giant c) main sequence d) white dwarf

Answers

The kind of star that belongs to the main sequence is the sun, according to the Hertzsprung-Russell diagram.

What were the monsters in Spectral?

In Pac-Man World 3, opponents are called Spectral Monsters. They are fiery Spectral Realm beings who are enraged by Erwin's interference with their world. They appear to be much less intellectual than ghosts, yet because of their special skills, they are more dangerous. Pac-Man can consume Spectral creatures in the same manner as ghosts.

What happens when spectral is over?

When Clyne turns off the device, the human parts of these apparitions are promptly killed along with their spirit counterparts. The final rebels in the town are swept up by American and Moldovan forces as the fight comes to an end.

To know more about spectral visit:

brainly.com/question/28216076

#SPJ4

PLEASE HELP WILL GIVE BRAINLIEST!3. Given a bronze wire of length 2.5 m and cross sectional area 6.5 x 10-⁷ m². What is the elongation of the wire if it is stretched under a force of 10³ N? Given: Young modulus of bronze is 2.0 x 10-¹¹N/m².​

Answers

Answer:

The elongation of the wire is approximately 4.81 x 10-³ m.

Explanation:

To find the elongation of the wire, we can use the formula:

Elongation = (Force * Length) / (Young Modulus * Cross Sectional Area)

Plugging in the given values, we have:

Elongation = (10³ N * 2.5 m) / (2.0 x 10-¹¹ N/m² * 6.5 x 10-⁷ m²)

We can simplify this to:

Elongation = (2500 N * 2.5 m) / (2.0 x 10-¹¹ N/m² * 6.5 x 10-⁷ m²)

Which simplifies to:

Elongation = (625 x 10-⁸ m³) / (1.3 x 10-¹¹ m³)

Simplifying further, we have:

Elongation = 4.81 x 10-³ m

Therefore, the elongation of the wire is approximately 4.81 x 10-³ m.

It's important to note that this is an approximate value, as the actual elongation may depend on various factors such as the temperature and the specific properties of the wire.

Why do some bodies in the Solar System maintain countless well-preserved indications of impacts on their surface
even after many millions of years? Give some examples and explain in detail how at least 2 factors contribute to this

Answers

Answer: because not all asteroids hit them

Explanation:

there isn’t much wind in space to direct the asteroid

Cecil works for Amazon and must push a 230 kg crate up the ramp on the back of his truck. The angle of the ramp is 35°. If the ramp is frictionless, how much work must be done to push the crate 7.00 m up the ramp at constant velocity?

Answers

The velocity of a vehicle is typically expressed relative to ground.

What is velocity?

Velocity is the speed of something that is given direction.

velocity is the measurement  to a  body's "pace of change of  the displacement in relation to time" whenever the main  body is traveling through along a straight route.

It is common knowledge of  that the word "linear" refers to be something that is totally straight; therefore,  when the body moves in a straight path, it is said to be linear velocity .

Alternatively, velocity is the  distance traveled by a body traveling in a specified to the direction during of a predetermined period of time. Thus, the fundamental idea of linear velocity is the  provided by the union of these two quantities.

Because it always has the direction of velocity is a vector.

To know more about velocity click-

https://brainly.com/question/25749514

#SPJ1

Why is the milky way galaxy not expanding together with the rest of the universe?.

Answers

Answer:

Local gravity dominates over the expansion of the universe.

Explanation:

(The expansion of the universe is a relatively weak force acting throughout the universe).

A 312 kg boulder is pulled with a rope across a field by a strong man. If the man uses a force of 2,472 N to cause the boulder to accelerate across the field. The coefficient of friction is 0.50. How fast does the strong man accelerate the boulder?

Answers

Here is the answer for ur question

energy wavelength relationship a) what is the energy, in ev, of a photon with a 550 nm wavelength? b) what is the wavelength of a 7.5 kev x-ray photon?

Answers

a) The energy of a photon with a wavelength of 550 nm is 3.58 10⁻¹⁹J. The equivalent energy in J is 2.40* 10⁻¹⁸ eV. a photon of 10 nm.

b) Its wavelength of an x-ray photon is 0.165 nm.

How is a wavelength used?

The wavelengths of a wave is the distance in between adjacent subsequent crests. It is evaluated in the direction of the wave. A wave's length is commonly denoted by the Greek letter lambda (). The ratio of a light train's frequencies (f) and velocity (v) in a medium is its dimension.

How is a wavelength measured?

By comparing the distance between the two identical locations on adjacent waves, the wavelengths can always be found. When determining the duration of a longitudinal wave, the distance from one compression to the next or from one seismic waves to the next is measured.

Briefing:

E=hcλ

E=(4.136×10−15 eV s)(3.0×108 m/s)550×10−9 m

E=2.40 * 10⁻¹⁸eV.

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

Do you think it is harder for architects (people who design buildings) to protect structures against internal or external forces? Why?​

Answers

Gravity is the attraction that things have for one another, like the powerful pull that the Earth has on the things that are on it.The "pull-apart" force is tension.The "push-together" force is compression.

Why are external factors significant?

Because they can have both direct and indirect influence on business operations, employees, and revenue, external environment considerations are significant.

What external forces are at work on the building?

The environment outside usually exerts external stresses on the structure.The building is subjected to external loads from dead, living things, snow, wind, and earthquakes.In the majority of cases, it is simple to identify the source of the these external demands.

To know more about internal or external forces visit:

https://brainly.com/question/9587173

#SPJ1

it is desired to project the image of an object four times its actual size using a lens of focal length 20 cm. how far from the lens should the object be placed?

Answers

It is desired to project the image of an object four times its actual size using a lens of focal length 20 cm, then the object should  be placed 25cm away from the lens.

What is meant by lens?

Lens is a transmissive optical device which focuses or disperses light beam by means of refraction.

Given focal length, f= 20 cm

and h1= 4h0

So, h1/h0= m = 4

Hence, v/u = 4

and v= 4u

As, 1/v - 1/u = 1/f

Now, 1/4u-(1/-u)= 1/20

5/4u= 1/20

So, u = 25 cm

The object should  be placed 25cm away from the lens.

To know more about lens, refer

https://brainly.com/question/9757866

#SPJ4

A baseball's resultant velocity is 23.92 m/s, at 57.80° from the level ground.
Determine the horizontal component of the baseball's velocity.

Answers

Answer:

A baseball’s resultant velocity is 17.23 m/s, at 26.02° from the level ground then the  horizontal component of the baseball’s velocity is 15.4835m/s

Velocity means the direction of the movement of the body or the object here given data is velocity =17.23 m/s, at angle= 26.02° and we have to find  horizontal component of the baseball’s velocity=?

So, Horizontal distance can be expressed as x=V × t

Cos26.02°=x/17.23 for vector component, this means that the

17.23cos26.02°= x horizontal component is the hypotenuse length

x=15.4835m/s is the horizontal component of the baseball’s velocity

Know more about horizontal component

Explanation:

As per as calculations

Unpolarized light is passed through two successive polaroid filters, each with its transmission axis at 45.0° to the preceding filter. what percentage of light energy gets through?

Answers

Orange, Blue, and Red are the three filters. They are easy to attach and cover the lens and flash on the front of the Polaroid Go camera.

What do you meant by Polaroid?

The primary benefit of Polaroid photography is the immediate visual feedback. Sharing Polaroid photos is one of the simplest things you can do with them.

An image of a friend is taken and given to the friend. Being one-to-one rather than one-to-the-world makes it a little different from other forms of sharing. Polaroid started to lose some of its major clients in the real estate, insurance, and photo identi-fication industries as digital cameras proliferated on the market.

As film sales collapsed, Polaroid declared bankruptcy in October 2001. A series of chemicals and dyes are sandwiched between layers to make up a Polaroid;

To learn more about Polaroid refer to:

https://brainly.com/question/17981657

#SPJ4

Other Questions
help me out please right the answer in spanish so 3 and 4 please helppppppppppppppppppppppppp this is the question is 2/5 equivalent to 25 The graph of g(x) is a transformation of the graph of f(x) = 2. Enter the equation for g(x) in the box. g(x) = I NEED HELPPP!! PLEASE ANSWER ASAP I WILL GIVE BRAINLIEST AFTER 2 PEOPL ANSWER THISSSSS Why does Cassandra miss the second day of practice? a. She is no longer interested in swimming b. She has to be home to prepare a special dinner. c. She believes that she has failed herself and her family. d. She injures herself during her heat and needs to recover. what did the citizens united v. federal election commission (2010) ruling hold about corporation and union spending on elections? The graph shows the relationship between the time and the distance a train traveled. Distance Traveled Distance (kilometers) 80- 70- 60- 50+ 40+ 30- 20+ 10+ 0 10 (40, 50) 20 30 40 50 60 Time (minutes) What does the point (40, 50) represent on the graph? Enter the answers in the boxes to complete the sentence. The point (40, 50) shows that in minutes, the train traveled kilometers. PLEASE HELP!How does the U.S. government influence the market economy? It provides public goods and services. It provides public goods and services. It tells companies how much to charge for all goods. It prevents states from collecting taxes. It buys companies in foreign markets Solve the following equation. Answer as a reduced, mixed number.9(x 6) = 8(x + 6) The body loses water in a variety of ways. Put the water output mechanisms in order from greatest contribution to fluid loss (1) to least contribution to fluid loss (4) per day. Zoe finds that the temperature of a substance is 12 degrees Celsius. What does this tell Zoe about the substance? Question 17 of 22Which of the following is a reason why speaking your thoughts can be betterthan writing them?OA. Speaking allows you to use long, complex sentences.OB. Speaking makes a person less nervous than writing.OC. You can respond immediately to your audience's concerns.OD. You have to choose an organizational format.SURMIT The map below shows the path of a river. The arrowshows the direction the river is flowing. LettersAand B identify the banks of the river.The water depth is greater near bank A than bank Bbecause the water velocity near bank A isA) faster, causing deposition to occurB) faster, causing erosion to occurC) slower, causing deposition to occurD) slower, causing erosion to occurAnswer: B To have a more positive metaverse experience, it's important to __________________________.A. check in with yourself to find the right balance B. interact with everyone in the same experience C. exit before someone starts connecting with youD. continue as long as possible without taking a break the efficiency of a solar cell is defined as the percentage of the total energy input that does useful work. t or f currently, umami pea and cracker snacks are shipped directly from the production facility to the retailers. umami snacks are available in ten retail chains across the united states. you believe that adding a food wholesaler to the distribution chain would benefit umami. when you present this recommendation to the ceo of umami, which argument should be your primary basis for the recommendation? please help ASP WIIL GIVE Brilliance what form of psychodynamic therapy focuses on helping clients improve their current relationships?