use any language to complete this challenge. the implementation is up to you: it can be a command-line application or have a graphical interface. your application should collect a name and robot type from the types we list below. for each, it should create a robot of the type the user chooses, e.g. larry, bipedal. given the list of tasks below, your application should then assign the robot a set of five tasks, all of which complete after a duration that we show in milliseconds. collect a name and robot type from user. instantiate a robot of the type provided by the user with the name provided by the user for example: bipedal, larry set up methods on robot to complete tasks from the provided list

Flextime is the option of choosing when to workday or workweek

What is flextime?

They can more easily achieve work-life balance and organize work around their other personal errands and commitments with flexitime. Allowing for flextime is also part of providing a family-friendly working environment.

Work flexibility cannot be achieved in all industries and professions (for example, in a factory or a hospital), but it is becoming the new normal for most creative and intellectual workers.

Keeping this in mind, you can increase work flexibility for your employees by adjusting three key parameters:

Working times (e.g. flexitime)

Patterns of work (e.g. job sharing)

Working environments (e.g. remote work, flexplace)

The ultimate goal is to provide any combination of the above to employees, preferably one that increases both employee satisfaction and company productivity at the same time.

Hence to conclude flextime is a boon for employees the option of choosing when to work during the workday or workweek

To know more on flextime jobs follow this link

https://brainly.com/question/14919589

#SPJ1

Answer: The above statement is true.

ICT refers to technologies that provide access to information through telecommunications.

Explanation:

In order to ensure that the given loop runs exactly 10 times, the 'n' should be replaced with 10. Hence, option A '10' is the correct answer.

The correct expression is as follows:

"for(int i = 0; i < 10; i ++ )

{

  System.out.println(i);

}"

The correct value that is replaced with 'n' is 10. Because in the question it is mentioned that the given 'for loop' needs to be run exactly 10 times. For running the loop upto the 10 times, the value of the 'i' is to be less that 10 i.e. 'i < 10'. Since the loop is starting from the value 0 that 'int i=0' and completes its 10th iteration when the value of 'i' reaches 9 that is less than 10.

Therefore, to run the 'loop' up to 10 times, 'n' should be 10.

"

Here is the complete question:

To ensure the loop runs exactly 10 times, what specific value instead of n one should use? for(int i= 0; i<n; i++) { System.out.println(i); }

A.10

B. 11

C. 9

D. None

"

You can leran more about loop at

https://brainly.com/question/26568485

#SPJ4

1.5D linear array is used to electronic focusing in the elevation direction. A 5 MHz, 1D linear array's performance in the uplift. With a 50 mm focus, the elevation aperture is 10 mm ().

To learn more about Elevation refer to:

brainly.com/question/25748640

#SPJ4

For the implementation of toll calculation we are using C++ programming.

What is C++ programming?

A general-purpose programming and coding language is C++ (also known as "C-plus-plus"). As well as being used for in-game programming, software engineering, data structures, and other things, C++ is also used to create browsers, operating systems, and applications.

Code for the toll calculation:

#include<iostream>

#include<iomanip>

using namespace std;

double CalcToll(int hour,bool isMorning,bool isWeekend)

{  

double res;

 if(isWeekend)

 {

 if(isMorning && hour<7)

  {

  res=1.05;

  }

 else if(isMorning && (hour>=7 || hour<=12))

  {    

res=2.15;

 }

  else if(!isMorning && (hour>=1 || hour<=7))

  {

   res=2.15;

 }

 else if(!isMorning && hour>=8)

 {

  res=1.10;

 }

}

else

 {

  if(isMorning && hour<7)

  {

  res=1.15;  

}

  else if(isMorning && (hour>=7 || hour<=9))

  {

   res=2.95;

 }

 else if(!isMorning && (hour>10 || hour<=12 || hour>=1 || hour<=2))   {    res=1.90;

 }

  else if(!isMorning && (hour>=3 || hour<=7))

  {

   res=3.95;

 }

 else if(!isMorning && hour>=8)

  {

  res=1.40;

 }

 }

 return res;

}

int main()

{

 cout<<CalcToll(8,true,false)<<endl;

 cout<<CalcToll(1,false,false)<<endl;

cout<<CalcToll(3,false,true)<<endl;

cout<<CalcToll(5,true,true)<<endl;

return 0;

}  

Output:

2.95

1.9

2.15

1.05

Learn more about C++ Programming click here:

https://brainly.com/question/28959658

#SPJ4

Tamika is working on her GDD and explaining one of the four elements of her game. The element that Tamika is working on is operation. The correct option is B.

A game design document (GDD) is a piece of software that serves as a blueprint for creating your game. It aids in defining the parameters of your game and establishes the overall course of the endeavor, keeping the team in agreement.

The main themes, aesthetics, features, mechanics, and ideas of your game project can be tracked using a Game Design Document, or GDD for short.

Therefore, the correct option is B. operation.

To learn more about GDD, refer to the link:

https://brainly.com/question/29319490

#SPJ1

Perfection of a security interest in a motor vehicle occurs when the secured party makes a notation of this interest on the certificate of title.

Even if your dreamed car is not yet in your hands, for some manufacturers the warranty starts to be valid from the issuance of the invoice. However, as our report shows, most already consider the delivery date of the vehicle. Check out how each manufacturer practices.

The guarantee covers all parts that present material failure, factory defect in the assembly or any problem that occurred before the product was sold - such as damage caused by transport or improper storage.

See more about vehicle warranty at brainly.com/question/29359773

#SPJ1

In general, the farther you are from other road users, the lower your crash risk.

What is Drivers Ed?

A formal class or program known as "driver's education," "driver's ed," "driving tuition," or "driving lessons" is designed to prepare new drivers for getting their learner's permit or driver's license.

The formal class program may also prepare current license holders for a medical evaluation driving test or refresher course as well as an international license conversion.

It might occur online, in a car, a classroom, or a combination of those places. Traffic laws and regulations as well as vehicle operation are covered in the lessons.

Typically, driving instructions will issue warnings about hazardous conditions like poor road conditions, impaired drivers, and inclement weather. Additionally, instructional videos that highlight proper driving techniques and the penalties for breaking the law may be played.

Education prepares pupils for exams to obtain a driver's license or learner's permit and is meant to enhance the knowledge learned from government-printed driving handbooks or manuals. With in-car instruction, a student rides along with an instructor in a car. It is possible to operate a vehicle with dual controls, which has at least an additional brake pedal and perhaps other controls on the passenger side.

Learn more about Driver Ed click here:

https://brainly.com/question/28109839

#SPJ4

The element of website design that refers to the website's aesthetic appeal and the functional look and feel of the site's layout and visual design is known as option C: context .

Websites with good content design are simpler to use and rank higher in search results. It takes care of all the tedious work so that using the internet is easier, quicker, and more fun. Understanding your audience is the first step, something we can assist you with if you get in touch.

Therefore, The notion that no design can be created in a vacuum is reflected in contextual design. that a single technology or system may interact in a context that is far larger than it; that environment won't necessarily stay the same (unchanging).

Learn more about website design from

https://brainly.com/question/22775095
#SPJ1

The code to call the function named send_signal which has no parameters for the function is given as follows;

send_signal()

SendSignal is used to synchronize two threads at a time. To synchronize several threads on the same event, utilize the event management functions: EventCreate: This method creates an event.

Note that Coding generates a collection of instructions that computers may use. These instructions specify the activities a computer may and cannot perform. Coding enables programmers to create programs like websites and applications. Computer programmers may also instruct machines on how to handle data more efficiently and quickly.

Learn more about coding:
https://brainly.com/question/28848004
#SPJ1

Creating a multi-function program with the name findfallingdist. cpp:

   fallingDist(double seconds, double &distOnEarth, double &distOnMoon)

You can assume the following:

   the acceleration of gravity is 9.8 m/s2 on earth and 1.6 m/s2 on the moon;

   the radius of the earth is 6.371E6 m and the radius of the moon is 1.737E6 m;

Your program should produce the following output:

Input the number of seconds: 3

Distance on Earth: 29.4

Distance on Moon: 3.7

*/

#include <iostream>

#include <cmath>

using namespace std;

void fallingDist(double seconds, double &distOnEarth, double &distOnMoon);

int main()

{

  double seconds, distOnEarth, distOnMoon;

  cout << "Input the number of seconds: " << endl;

  cin >> seconds;

  fallingDist(seconds, distOnEarth, distOnMoon);

  cout << "Distance on Earth: " << distOnEarth << endl;

  cout << "Distance on Moon: " << distOnMoon << endl;

}

void fallingDist(double seconds, double &distOnEarth, double &distOnMoon)

{

  distOnEarth = 0.5 * 9.8 * pow(seconds, 2);

  distOnMoon = 0.5 * 1.6 * pow(seconds, 2);

}

Learn more about programming:

https://brainly.com/question/18900609

#SPJ4

The option that is a text file that a website stores on a client's hard drive to track and record information about the user is option A: Cookie.

A cookie is a piece of information from a website that is saved in a web browser for subsequent retrieval by the website. Cookies are used to let a server know whether visitors have visited a specific website again.

Therefore, Computer cookies are small files that web servers send to browsers and frequently contain unique identifiers. Each time your browser requests a new page, the server will receive these cookies. It enables a website to keep track of your online preferences and behavior.

Learn more about Cookie from

https://brainly.com/question/14252552
#SPJ1

Answer:

C

Explanation:

Because if you don't know it can help you

The command when run from the /, or root, the directory will return a very long list of many pages of results "du". Hence, option C is correct.

A command is a request that tells a computer algorithm to carry out a certain task in computing. It can be sent using a command-line interface, such shell, as input to a data network or part of a protocol stack, as an actor in a user interface brought on by the user picking an item from a menu, or as a command sent to a computer over a network.

Imperative computer languages specifically employ the word "command" in their vocabulary.

Statements in such languages are typically expressed in a way resembling the urgent mood seen in many natural languages, which is how the name for these languages came about. A command is typically compared to a verb in a natural language, if one thinks of a statement inside an object-oriented language as being similar to a sentence.

To know more about Command:

https://brainly.com/question/14758272

#SPJ12

Since the infection of a digital device by a computer virus happens in stages, the second step in this process is option A: An action such as running or opening a file activates the virus.

A virus that has infected a computer attaches itself to another software so that when the host program runs, the virus's actions are also activated. It has the ability to replicate itself, attaching to other files or programs and infect them in the process.

Therefore, note that in the second stage, the majority of viruses, Trojan horses, and worms start when you open an email attachment or click on one of its links. If your email client supports scripting, then opening an email could expose you to a virus.

Learn more about computer virus  from

https://brainly.com/question/26128220
#SPJ1

See full question below

The infection of a digital device by a computer virus happens in stages. What is the second step in this process? Multiple Choice An action such as running or opening a file activates the virus. The infection spreads to other computers via infected email, files, or contact with infected websites. The virus arrives via email attachment, file download, or by visiting a website that has been infected. The payload or the component of a virus that executes the malicious activity hits the computer and other infected devices.

Dumpster Diving is a non-technical password attack that is enabled if you write a password on a sticky note and through in the trash. The answer is Dumpster Diving.

Dumpster diving is the practice of rummaging through other people's trash for buried treasure. Dumpster diving is a technique used in information technology (IT) to recover data from discarded items that could be used to carry out an attack or gain access to networks.

Dumpster diving isn't just looking through trash for things like sticky-noted passwords or access credentials that are obviously valuable. A hacker using social engineering tactics may utilize seemingly innocent information, such as a phone book, calendar, or organizational chart, password written over stick notes to help them access the network.

Experts advise businesses to implement a disposal policy that requires all paper, including printed copies, to be shredded in a cross-cut slicer before being recycled, all storage media to be erased, and all employees to be trained on the risks of untracked trash in order to prevent dumpster divers from learning anything valuable from the trash.

You can learn more about Dumpster diving at

https://brainly.com/question/15012416

#SPJ4

Replay attacks involves capturing data packets from a network and retransmitting them to produce an unauthorized effect

What are replay attacks?

Replay attacks entail retransmitting data packets that have been taken from a network in order to have an unauthorized effect. Receiving duplicate, authenticated IP packets could cause service to be interrupted or have some other unfavorable effect.

A replay attack is an active attack since it needs access to listen to all network messages and the capacity to transmit false ones.

Replay attacks are extremely prevalent because a hacker doesn't need specialised knowledge to decrypt the data after intercepting a transmission from a network. Replay attacks come in many different shapes and sizes and are not just restricted to credit card transactions.

Hence to conclude Replay attacks involves capturing data packets from a network and retransmitting them to produce an unauthorized effect

To know more on attacks in network follow this link

https://brainly.com/question/25807648

#SPJ4

Advance Orbital Security would be using Passive Infra Red (PIR) and Active Ultrasonic sound detector in its security system design in order to trigger the security system and call the police upon activation.

Passive Infra Red (PIR) sensor or motion detector security system uses passive infra red that measures changes in the heat energy in the form of electromagnetic radiation radiating from its field of view, and those heat energy are often invisible to human eye. As as soon as the device detected changes in the electromagnetic radiations, it will send out an electric signal from the triggered device to the security system control panel which triggers the alarm sound which then simultaneously sends a cellular signal to the monitoring center at Advance Orbital Security which will then contacted and dispatch the police.

Active Ultrasonic Sound detector in the security system works by emitting ultrasonic sound waves that bounce off objects in its surroundings and return to the sensor with a transducer within the sensor that sends the pulse and receives the echo determining the distance between itself and the target by measuring the time between sending and receiving the signal. As soon as there is a time difference between sending and receiving the echo, it will send out an electric signal, alerting the security system control panel  which then send out e cellular signal to the monitoring center at AOS  security system which will then dispatch the local law enforcement agency.

To learn more about security system visit: https://brainly.com/question/826760

#SPJ4

The full eagle logo, used in various versions from 1970 to 1993

The United States Postal Service (USPS), also known as the Post Office, U.S. Mail, or Postal Service, is an independent agency of the executive branch of the United States federal government responsible for providing postal service in the U.S., including its insular areas and associated states. It is one of the few government agencies explicitly authorized by the U.S. Constitution. The USPS, as of 2021, has 516,636 career employees and 136,531 non-career employee

Explanation:

Between a Network Access Server that wants to authenticate its links and a shared Authentication Server, RADIUS is a protocol for transferring authentication, authorization, and configuration information. Remote Authentication Dial In User Service is what RADIUS stands for. You can centralize user authentication and accounting with a Remote Authentication Dial-In User Service (RADIUS) server, a particular kind of server.

What is Server Authentication?

When a person or another server needs to prove their identity to an application, an authentication server is used to check their credentials.

The act of identifying a person or machine to confirm that they are who they claim to be is known as authentication.

To confirm this, an application or device could request a variety of IDs. Every identifier often belongs to one of these three groups:

The RADIUS server obtains the user credentials from the message and searches for a match in a user database if the Access-Request message employs a permitted authentication technique.

The RADIUS server can access the user database to obtain further information about the user if the user name and password match an entry in the database.

Additionally, it checks to determine if the configuration of the system contains an access policy or a profile that fits all the data it has about the user. The server replies if such a policy is present.

Learn more about Remote Authentication Dial In User Service click here:

https://brainly.com/question/15397099

#SPJ4

The main service for storing, processing, and protecting data is provided by the Database Engine component of SQL Server. On a single computer, SQL Server enables running up to 50 instances of the Database Engine.

Every application request to perform work on the data in any of the databases that instance manages is handled by a copy of the sqlservr.exe executable running as an OS service known as an instance of the Database Engine. If the application and instance are located on different machines, the applications connect to the instance using a network connection. The SQL Server connection can function as either a network connection or an in-memory connection if the application and instance are both running on the same computer.

Learn more about database here-

https://brainly.com/question/6447559

#SPJ4

Custom labels are printed using a variety of techniques in the label printing process. Some options when printing labels are Single label and Full page of same label.

What Is Label Printing?

Label printing is the process of creating personalized labels using different techniques. These techniques include wide-format printing, flexographic printing, and digital printing, all of which have an impact on how the label looks, feels, and serves its purpose.

Label Printing Today:

Flexographic printing has continued to advance and prosper up until the 1990s, when digital printing emerged as a brand-new method for producing labels. With the addition of inkjet technology, this process has advanced today, producing premium, full-color labels with a less time-consuming procedure and less waste.

To know more about Label Printing, visit: https://brainly.com/question/4676056

#SPJ9

The one statement that should be used in the scenario is OSPF. The correct option is b.

Detailed packet capture data that identifies the source and destination of communications, as well as the protocol or port being used, can be provided by network analyzers.

Determine which network components or devices are causing bottlenecks in the flow of traffic. Identify unusually high network traffic levels. OSPF is Open Shortest Path First. It is a routing protocol.

Therefore, the correct option is b. OSPF regarding the scenario given.

To learn more about network analyzers, refer to the link:

https://brainly.com/question/24031038

#SPJ1

The question is incomplete. Your most probably complete question is given below:

a.

IS-IS

b.

OSPF

c.

EIGRP

d.

BGP

Three members from the command line and prints those numbers to the screen/monitor is as follow:

#include<stdio.h>

void main()  #the entry point for execution

{

int a,b,c,n;

printf("Enter 3 numbers:\n"); #performed formatted input

scanf("%d %d %d",&a,&b,&c);  #performed formatted output

n=(a>b)?(a>c?a:c):(b>c?b:c);

printf("%d is biggest number.",n); #performed formatted input

}

Output:

Enter 3 numbers:

12 45 33

45 is biggest number.

What is Command line in c?

Simply said, command line arguments are parameters that are stated in the system's command line following the program name. The values of these arguments are passed to your program during program execution.

What is printf() and scanf()?

Both the result and user input are displayed using the printf() and scanf() functions, respectively. In the C programming language, the printf() and scanf() methods are often used. These functions are built-in library functions found in C programming header files.

Learn more about command line click here:

https://brainly.com/question/25808182

#SPJ1

confidentiality means protecting proprietary information about company finances, procedures, products, and research that competitors would find valuable

proprietary information includes Financial information, statistics or declarations, trade secrets, merchandise research & innovation, current, and future new products and quality requirements, marketing campaigns, plans or tactics, schematics, customer information, software programs, processes, as well as understanding which has been explicitly labeled and labeled as specialized by the corporation are all examples of information and material related to or affiliated with such a company and its products, business, or activities.

A firm's proprietary information is highly significant and may even be critical data. Typically, the corporation could employ this knowledge to its benefit in its industry. Proprietary items include anything that the creator or producer has the only legal right to use, know, develop, produce, and/or promote.

Learn more about proprietary here: https://brainly.com/question/27332470

#SPJ4

When concurrently processing instructions, a shared memory computer works well with a common data set in a single memory space. (Option C)

In computer engineering, shared memory is the memory that may be accessed by many applications at the same time in order to facilitate communication or minimize redundant copies. Shared memory is a fast way to transfer data between applications.

Shared memory is a storage region shared by all Service Manager server processes on a host server. Sharing data across processes is made easier by using shared memory.

Learn more about shared memory computers:
https://brainly.com/question/14982890
#SPJ1

The last section in the field types gallery, Quick Start field types , provides an easy way to add a group of related fields with a single command.

When using quick start fields, for instance, all you have to do is select the Address button, and Access will instantly construct every field required to create an address: Location, City, State, and Zip

To get started building a new web database, use quickstart fields. if your web database is empty when you begin. rather than just adding a single field using the drop-down menu.

Therefore, A quickstart is a guidebook or instruction intended to familiarize a user with a software or system quickly (plural: quickstarts).

Learn more about command from

https://brainly.com/question/25808182
#SPJ1

Remote desktop refers to the capability of a different computer to connect to and use a distant desktop computer.

Computer is defined as a programmable electrical gadget that takes in raw data as input and applies a set of rules to it to output the outcome. After executing logical and mathematical processes, it renders output and can save the output for further use. It consists of the three previously mentioned major computer components: memory device Unit of control. Unit of Arithmetic and Logical.

Before installing a new version of Windows on your organization's computers, the Compatibility Administrator program aids in resolving any application compatibility problems. Some incompatibilities caused by changes between Windows operating system versions can be resolved.

Thus, remote desktop refers to the capability of a different computer to connect to and use a distant desktop computer.

To learn more about computer, refer to the link below:

https://brainly.com/question/21080395

#SPJ1

The type of technology created conveniences by providing wireless communication systems that allowed people to access information wherever they wanted it is  Bluetooth technology.

Using short-wavelength radio channels in the ISM band between 2400 and 2480 MHz, Bluetooth is a patented open wireless technology technique for transmitting information over short distances from stationary and mobile devices.

Hence, You can communicate small quantities of data using Bluetooth Low Energy, sometimes referred to as Bluetooth Smart, a variation of "traditional" Bluetooth. The reduced power consumption of Bluetooth Low Energy is the primary distinction between the two technologies. Thus, it is called "Low Energy."

Learn more about Bluetooth technology from

https://brainly.com/question/28590612

#SPJ1

(b) assign a managed identity to the azure app configuration instance and (d) configure managed identity permission to access the azure key vault are the two actions that need to perform for this situation.

What is the azure key vault?

By leveraging keys that are guarded by hardware security modules, Microsoft Azure Key Vault, a cloud-hosted management solution, enables customers to encrypt keys and tiny secrets (HSMs). Small secrets include passwords and other data that is less than 10 KB in size. PFX documents

Both managed hardware security module (HSM) pools and vaults are supported by the Key Vault service. Keys, secrets, and certificates secured by an HSM can be stored in vaults. Managed HSM pools only accept keys with an HSM backup.

To learn more about the azure key vault, use the link given
https://brainly.com/question/29433704
#SPJ1

Data types are automatically assigned as the smallest possible data type: A. true.

In Computer programming, there are four (4) common kinds of data type and these include the following:

Generally speaking, data are categorized automatically to smallest data type and size with each of them matching that of other inputs because they must be blended with other data.

Read more on a data types here: https://brainly.com/question/13438922

#SPJ1