URGENT URGENT DUE SOON!!

Which statement describes a question that can guide the design of a
scientific investigation?
A. It asks about a cause-and-effect relationship between two
variables.
B. It asks about the preferred outcome of the investigation.
C. It asks about whether a controlled variable is necessary.
D. It asks about how the observations will be organized.

Answers

Answer 1

Answer:

A.

Explanation:

Im just guessing because it sounds like it describes a hypothesis the most and you said its urgent


Related Questions

blutions math practice
Maddie Hicks: Attempt 1
07.5 ml
Question 4 (1 point)
You have a stock bottle of 3mM tetrodotoxin solution, but your protocol states that
you need 6ml of 1mM tetrodotoxin (MW=319.27 g/mol). How much of your 3mM
stock solution (liquid) should you use to make the 1mM solution?

Answers

Answer:

[tex]V_1=2mL[/tex]

Explanation:

Hello,

In this case, considering this as a dilution problem, the first step here is to consider that the moles of tetrodotoxin remains the same and just the volumes and concentrations are modified from the initial stock (1) and the required dilution (2):

[tex]V_1M_1=V_2M_2[/tex]

Whereas V is referred to volume and M to molar concentration, in this case in mM. In such a way, solving the V1 as the volume of the 3-mM solution we obtain:

[tex]V_1=\frac{V_2M_2}{M_1} \\\\V_1=\frac{6mL*1mM}{3mM} \\\\V_1=2mL[/tex]

It means you need 2 mL of the 3-mM solution.

Best regards.

The mere exposure effect is

Answers

DescriptionThe mere-exposure effect is a psychological phenomenon by which people tend to develop a preference for things merely because they are familiar with them.

How does deploying slats or slots on an airfoil affect CL max and Stall AOA?
a) Stall AOA increases, CL max increases.
b) Stall AOA decreases, CL max increases.
c) Stall AOA increases, CL max decreases.
d) Stall AOA decreases, CL max decreases.

Answers

Answer: a. Stall AOA increases, CL max increases.

Explanation:

Deploying slats or slots on an airfoil affect CL max and Stall AOA by increasing Stall AOA and also increasing CL max.

It should be noted that the coefficient of lift CL would rise through the use of slots due to increase in boundary later energy. The slots also leads to delay of stall by through increase in AOA.

Direction of propagation of light is:________a. in all directions irrespective of polarization b. parallel to the polarization c. perpendicular to the polarization d. not dependent on polarization

Answers

Answer:

Perpendicular to the polarization

Explanation:

In this question, we are interested in selecting the option that best complete the question.

The direction of propagation of light is perpendicular to the polarization. Polarized and unpolarized light behave in different manners.

In unpolarized light, the oscillation of the magnetic and electric occurs in all directions to the propagated light.

However, in the case of polarized light, there is a restriction of the electric field oscillation. And thus, it only oscillates in a direction which is perpendicular to the propagation light


Which phrase describes a scientific law?
A. A statement that matter cannot be created or destroyed
B. A claim that experiments cannot verify whether matter has been
destroyed
O C. An explanation for why matter cannot be created or destroyed
D. A prediction of how much matter exists in the universe
SUBMIT
In

Answers

Answer:

C- An explanation for why matter cannot be created or destroyed

Explanation:

Answer: A. A statement that matter cannot be created or destroyed.

Explanation:

Apex

If you were told an atom was an ion, you would know the atom must have a ______?
O Neutral Charge
O Charge
O Negative Charge
O Positive Charge

(This is due Tonight, so please help me ASAP!!!)​

Answers

Answer:

charge

Explanation:

7r0I and its etc. ,"!×_/;

three short square wood blocks measuring 3.5 per side support a machine weighing 29500 lbs. What is the compressive stress in the blocks
A. 798lbs
B. 421lbs
C. 1404lbs
D. 803lb

Answers

Answer:

D. 803 lbs

Explanation:

In order to find the compressive stress on all three blocks we first need to find the normal surface area of each:

Surface Area of 1 Block = 3.5 x 3.5

Surface Area of 1 Block = 12.25

Surface Area of all 3 Blocks = A = 3 x 12.25

Area = 36.75

Now, the stress is given by the following formula:

Stress = Force/Area

Stress = 29500 lbs/36.75

Stress = 802.72 lbs

Hence, the correct option will be:

D. 803 lbs

If you go 45 meters at a speed of 16 m/s, how long does the movement take? Exact answer, do NOT round.

Answers

Answer:

2 seconds

Explanation:

The time taken for the movement is 2.81 seconds.

To find the time, the given values are,

Distance = 45 meters

speed = 16 m/s.

What is distance?Distance is the total movement of an object without any regard to direction.Distance can be evaluated how much an object moves from starting point to the end point.The distance completely depends upon the speed and time, i,e., the object covering some area with some particular time interval with the particular speed.Distance will be measured in meter, kilometer, etc..Distance is a Scalar quantity.

Formula of distance,

              Distance = Speed × Time.

As we have to find the time, Formula can be rearranged as,

              Time = Distance / Speed

Substituting the given datas in the formula,

Time = 45 / 16

        = 2.81 seconds.

So, the time taken for the movement is 2.81 seconds.

Learn more about the distance,

https://brainly.com/question/18416154

#SPJ2

is the
What is the tendency to move to a drive-free state?
O A. Homeostasis
OB. Equality
OC. Homogeneity
OD. Motivationless

Answers

I think the correct answer is A) Homeostasis, I’m sorry if it’s wrong

You stand at the top of a cliff while your friend stands on the ground below you. You drop a ball from rest and see that it takes 1.7s for the ball to hit the ground below. Your friend then picks up the ball and throws it up to you, such that it just comes to rest in your hand. What is the speed with which your friend threw the ball

Answers

Answer:

16.7m/s

Explanation:

Using v= u+ at

V = final velocity. U = initial velocity

So since the two movements are the same they will return with the same speed they went up

Then final velocity v= 0

So

0:= u +-9.8 x 1.7

U= 16.7m/s

A person drops two objects from the same height. One object weighs 15 N.
and the other weighs 10 N. How does the mass of the objects relate to the
force of gravity on them?
A. The 10 N object has the same mass as the 15 N object.
B. The 15 N object has twice the mass of the 10 N object.
C. The 15 N object has more mass than the 10 N object.
D. The 10 N object has more mass than the 15 N object.

Answers

Answer:

C

Explanation:

The 15N object has more mass than the 10N object.

A 15 N object has more mass than the 10 N object due to their weight differences.

What is Weight?

Weight is defined as the force exerted by the earth on an object on the surface of earth. The direction of this force is directed towards the center of earth. Mathematically -

W = mg

Where -

m is the mass of body

g is the acceleration due to gravity

Weight can also be written as -

W = ρVg     [ρ is density and V is volume]

Given is a person who dropped two objects from the same height. One object weighs 15 N and the other weighs 10 N.

We can write -

Weight of Object 1 [W1] = 15 N

Weight of Object 2 [W2] = 10N

We know that -

W = m x g

We can write it as -

m = W/g

Therefore -

Mass of Object 1 [M1] = 15/9.8 = 1.53 Kg

Mass of Object 2 [M2] = 10/9.8 = 1.02 Kg

Clearly -

M1 > M2

So, the 15 N object has more mass than the 10 N object.

Therefore, a 15 N object has more mass than the 10 N object due to their weight differences.

To solve more questions on Weight, visit the link below-

https://brainly.com/question/8900700?referrer=searchResults

#SPJ5

The speed of x-rays is 300 000. m/s. In scientific notation, and with the correct number of significant figures, this speed is… *

Answers

Answer:

3.0 x 10 and the exponent on ten is 5.

Explanation:

You are moving the decimal point over to the left 5 times, making the exponent a positive 5 and then you would put a decimal after 3. Making it 3.0 x 10, and the exponent 5.

The speed of x-rays in scientific notation is 3.0 x 10⁶ m/s.

The given parameters;

speed of the x-ray, v = 300,000 m/s

The standard form of the given number represents the scientific notation of the number.

To represent a number in standard form, multiply the number in terms of power or exponent of 10. The value of the exponent represents the number of available zeros present.

In scientific notation the speed of the x-ray can be expressed as follows;

300,000 m/s = 3.0 x 10⁶ m/s

Thus, the speed of x-rays in scientific notation is 3.0 x 10⁶ m/s.

Learn more here: https://brainly.com/question/17093969

Sound travels at a rate of 340 m/s in all directs through the air. Matt rings a very loud bell at one location, and Steve hears it some time later at his location 450 meters to the south. How long did it take the sound to travel from the bell to Steve’s location?

Answers

Answer:

It will take about 1.32 seconds to travel to his location.

Explanation:

Considering the sound travels at 340 m/s, then if a person is at a distance of 450 m m from the bell, we can use the velocity formula to find the answer;

[tex]velocity=\frac{distance}{time} \\340\,\frac{m}{s} =\frac{450\,\,m}{t} \\t=\frac{450}{340} \,s\\t\approx 1.32\,\,s[/tex]

Answer:

b

Explanation:

a steel ball bearing will sink in water but a large ship floats because​

Answers

Answer:

water displacement.

the bigger the item means more water displacement meaning bouyance

Calculate the velocity of the bicyclist between 0 and 3 seconds.

Answers

Answer:

is there an equasion it gives you?

Explanation:

need a little more info.

Do states give up all power to withdraw when they join a union of states, or do they still retain some control over their fate?

Answers

Yes if you’re going on the road or you something you can do to get on your way home from the airport if I

How many Newtons of force does it take to move a 53 kilogram object?

Answers

519.75N

explanation: good luck on whatever assignment

How much work must be done to stop a 1150 kg car traveling at 120 km/h?

Answers

Answer:

The work to be done is 638,761.12 J

Explanation:

Given;

mass of the car, m = 1150 kg

velocity of the car, v = 120 km/h = 33.33 m/s

Apply work energy theorem;

W = K.E

where;

W is the work done

K.E is the kinetic energy

W = ¹/₂mv²

W =  ¹/₂ (1150)(33.33)²

W = 638,761.12 J

Therefore, the work to be done is 638,761.12 J


Elmer Fudd is walking at 2.0 m/s. If he walks for 2.0 minutes, how far does he walk?
(Can someone help with the answer due in 5min)

Answers

Answer:

240 meters

Explanation:

He is walking 2 meters per second, and there are 60 seconds per minute. There are 120 seconds in two minutes. So, 120 x 2 = 240. That's your answer!

it is required that an object weighing 8N be moved up ward at an acceleration of 2m/s what is the upward force needed ​

Answers

Answer:

F = 1.6 N

Explanation:

Newton's Second Law of Motion states that whenever an unbalanced force is applied on a body. It produces an acceleration in the body, in its own direction. The magnitude of the force is given by the following formula:

F = ma

where,

F = Force Required to Move the Object Upward = ?

m = mass of object

a = upward acceleration = 2 m/s²

but, we know that weight of object is given as:

Weight = mg

8 N = m(9.8 m/s²)

m = 0.8 kg

using values in the equation:

F = (0.8 kg)(2 m/s²)

F = 1.6 N

A car travels 82 meters do North and 14 seconds the car turns around and travels 44 m due south in four seconds what is the magnitude of the average velocity of the car during the full travel time?

Answers

Answer:

2.11 m/s

Explanation:

Take north to be positive and south to be negative.

Average velocity = displacement / time

v = (82 m + -44 m) / (14 s + 4 s)

v = 2.11 m/s

The velocity is positive, so it is 2.11 m/s north.  The magnitude of the velocity is 2.11 m/s.

Aldis is swinging a ball tied to the end of a string over his head. Suddenly, the string breaks and the ball flies away. Arrow best represents the path the ball follows after the string breaks.

Answers

Answer:

Straight line in the direction of the tangential velocity the ball had at the moment the string broke

Explanation:

After the string breaks, the ball now disconnected from the centripetal force that was exerted via the string, continues its travel in a straight line in the direction of the tangential velocity it had at the moment the string broke.

Answer:

B

Explanation:

just took the test :)

Question 3
A box is being pulled by a rope that makes a 25 degree angle with the ground. The
pulling force is 100.0 N
along the rope. Find the horizontal and vertical components of the force vector.
A. 90.63 N, 42.26 N
B. 86.87 N, 32.17 N
C. 60.87 N, 75,63 N
D. 80.9 N, 45.5 N
What is the answer A,B,C or D?

Answers

Answer:

A

Explanation:

The mass of a string is 20 g and it has a length of 3.2 m. Assuming that the tension in the string is 2.5 N, what will be the wavelength of a travelling wave that is created by a sinusoidal excitation of this string with a frequency of 20 Hz. Provide the wavelength in units of m. Please note: You do not include the units in your answer. Just write in the number.

Answers

Answer:

The wavelength of the wave is 1 m

Explanation:

Given;

mass of the string, m = 20 g = 0.02 kg

length of the string, L = 3.2 m

tension on the string, T = 2.5 N

the frequency of the wave, f = 20 Hz

The velocity of the wave is given by;

[tex]v = \sqrt\frac{T}{\mu} {}[/tex]

where;

μ is mass per unit length = 0.02 kg / 3.2 m

μ = 6.25 x 10⁻³ kg/m

[tex]v = \sqrt{\frac{T}{\mu} } \\\\v = \sqrt{\frac{2.5}{6.25*10^{-3}} } \\\\v = 20 \ m/s[/tex]

The wavelength of the wave is given by;

λ = v / f

λ = (20 m/s )/ (20 Hz)

λ = 1 m

Therefore, the wavelength of the wave is 1 m

What are the two main types of star clusters?

Answers

Fuzzy clustering
Model-based clustering

Answer:

Open and globular

Explanation:


65°F to degrees Celsius​

Answers

Answer:

18.3 C

Explanation:

Answer: 55/3 °C

Explanation:

Formula:

C=5/9(F-32)

Given:

F=65

Solve:

C=5/9(F-32)

C=5/9(65-32)

C=5/9(33)

C=55/3

Question 5
Thermal energy can increase even if the average kinetic energy is constant.
O True
O False

Answers

True........................

The statement "thermal energy can increase even if the average kinetic energy is constant" is definitely true.

What do you mean by Kinetic energy?

Kinetic energy may be characterized as a type of energy that an object possesses due to its motion. It is defined as the work that is required to accelerate a body of a given mass from rest to its stated velocity. It measures the work an object can do by the virtue of its motion.

The thermal energy will still enhance even if the average kinetic energy remains constant. This is because it is based on the relationship between kinetic energy and thermal energy. Kinetic energy is defined as the energy possessed by an object or body as a result of its motion.

Therefore, the statement "thermal energy can increase even if the average kinetic energy is constant" is definitely true.

To learn more about Thermal energy, refer to the link;

https://brainly.com/question/19666326

#SPJ6

What is the speed of an object that travels 20 meters in 4 seconds?

Answers

Given:-

Distance covered by the particle (s) = 20 mTime taken (t) = 4 seconds

To Find: Speed of it.

We know,

v = s/t

where,

v = Speed,s = Distance &t = Time taken.

Putting the values,

v = (20 m)/(4 s)

→ v = 5 m/s (Ans.)

The speed of an object will be "5 m/s".

The given values are:

Distance,

d = 20 m

Time,

t = 4 seconds

As we know, the formula:

→ [tex]Distance (d)= Speed (v)\times Time (t)[/tex]

or,

→ [tex]Speed (v) = \frac{Distance (d)}{Time (t)}[/tex]

By putting the values, we get

→                [tex]= \frac{20}{4}[/tex]

→                [tex]= 5 \ m/s[/tex]

Thus the above answer is correct.

Learn more:

https://brainly.com/question/18660562

Question
In order for work to be done, what three things are necessary

Answers

Perseverance, good mind set, and work ethic
you will need work ethic, self control, and a good mindset

what are two examples of population distribution?

Answers

Three basic types of population distribution within a regional range are (from top to bottom) uniform, random, and clumped.
Other Questions
What is Americans with Disabilities Act. describe how changing the particles changed the atom Which of the following is a benefit of participating in team sports? Edit: nvm, I got it, its improved heart health Find the length of side CB in the following right triangleRound your answer to the nearest tenth. What is deinstitutionalization? what was the reasonings for the 9/11 attack If lines Joined each given point on the graph to the origin, which points would be on lines that represent a unit rate greater than the one represented in the table? , 5,11 10,22 15,33 Pls help I am so confused 16.3 (7.89)? It says im in highschool but im in middle school 7th grade! is negative 31 an integer Which inequality is true for all real numbers? check all that apply. 1.a b < a + b 2.ac bc 3.If a b, then a + c b + c 4.If c > d, then a c < a d 5.If a < b, then a < b + c Why do younger people tend to struggle with their emotional intelligence? What is the answer to X(x+7) The Declaration of Independence was writtenWhen the American revolution endedBefore the American revolution beganDuring the second year of the American revolution At the beginning of the American revolution What value of m makes the equation true?16 + 2 ( 5m -8 ) - m = 36 Which statement describes the inverse of m(x) = x2 17x? What does it mean that the"world was [his) oyster? Which word is correct: The thief who/ whose stole the bag has ran away What are the common approximations made in the analysis of heat exchangers? Is this piece a fresco? How has it withstood the test of time? (Picture of god and his 12 disciples)