Urgent!!! 100 points

The indicator in a titration changed color after 0.01 mol of sodium hydroxide were added to a sulfuric acid solution for the acid-base reaction shown below:
H2SO4 + 2NaOH → Na2SO4 + 2H2O
How many moles of sulfuric acid are in solution? HINT: The ratio of moles of the sulfuric acid to the sodium hydroxide in this reaction is 1:2.

Answers

Answer 1

Answer:

0.005 moles of sulfuric acid are in the solution

Explanation:

The acid-base reaction you have shown occurs in a 1:2 mole ratio, meaning that for every mole of sulfuric acid, 2 moles of sodium hydroxide are required to neutralize it.Since you added 0.01 moles of sodium hydroxide, this would be enough to neutralize 0.01/2=0.005 moles of sulfuric acid.Therefore, there are 0.005 moles of sulfuric acid in the solution.

Related Questions

Why do we calculate rms velocity?

Answers

The explanation we utilize the rms velocity rather than the normal is that for a commonplace gas test the typical speed is zero since the particles are moving every which way.

What is rms velocity?

Root mean square (RMS) velocity is the square base of the amount of the squares of the stack speed values partitioned by the quantity of values. RMS speed is the speed of a wave going through underground developments at various span speeds along a given beam way.

For flat or marginally inclined layers, NMO and stacking speed are equivalent to RMS speed. In any case, in regions with huge parallel speed varieties, the stack velocity contrasts essentially from the RMS speed.

Conduction is the minuscule temperature inclination of the root-mean-square speed of issue. This substance can be either strong, fluid, or gas.

The explanation we utilize the rms velocity rather than the normal is that for a regular gas test the typical speed is zero since the particles are moving every which way.

To know more about  rms velocity, visit:

brainly.com/question/29605566

#SPJ4

The chemical formula for hydrogen sulfide is H₂S. What is the mass of hydrogen in 150 g of
H₂S? (H = 1, S = 32)

Answers

The chemical formula for hydrogen sulfide is H₂S. The mass of hydrogen in 150 g of 141.2 g. Therefore, option A is correct.

What is mass ?

A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely considered to be tied to the amount of matter in a physical body.

Simply put, mass is a measurement of a body's amount of matter. Matter is everything that has both volume and mass. Although mass cannot be seen, it can be measured or quantified. Not all matter is visible. Typically, mass is expressed in kilograms, etc.

Molar mass of  H₂S

= 1 × 2 + 32

= 34

The mass of hydrogen in 150 g is 141.2 g.

Thus, option A is correct.

To learn more about the mass, follow the link;

https://brainly.com/question/19694949

#SPJ1

Determine the bond angle for SiO2, BF3, CFCl3, H2CS, CBr4, H2CO, SC2, HB3.

the question ask is to Express your answer using three significant figures...???

thank you!

Answers

The bond angle for SiO2 is 120 degrees. The bond angle for BF3 is 120 degrees. The bond angle for CFCl3 is 120 degrees. The bond angle for H2CS is 120 degrees

Bond angle is defined as the relationship between two bonds, or the angle among two orbitals in a complex molecule or ion that contain bonding electron pairs. It is determined by calculating using a spectroscopic method and measured in degrees. The bond lengths in a molecule is the angle formed by three connected nuclei. Electron domains have distinctive angles and structures. A central atom with two electron density regions, for example, is regarded linear with an angle of 180°. More complex structures have multiple angles. Valence bond model says a bent geometry for the molecule of water with a bond angle of 90° because the 2 2p orbitals are at right angles to each other.

To learn more about Bond angle here:

https://brainly.com/question/13751116

#SPJ4

What kind of software is available for assessing the carbon footprint?

Answers

There are several types of software available for assessing the carbon footprint of a company, organization, or individual. These tools can help users track their GHG emissions and set reduction targets.

Carbon footprint calculators: These tools allow users to estimate their GHG emissions by entering information about their energy use, transportation, waste, and other relevant factors. Some calculators are specific to a particular sector or industry, while others are more general.

Carbon accounting software: This type of software helps users track their GHG emissions over time and set reduction targets. It may include features such as data management, reporting, and verification.

Life cycle assessment (LCA) software: LCA software is used to assess the environmental impacts of a product or service from raw material extraction to disposal. It can be used to quantify GHG emissions at different stages of a product's life cycle.

Supply chain software: This type of software is used to track the environmental impacts of a company's supply chain, including GHG emissions. It may include features such as data management, reporting, and supplier assessment.

Learn more about carbon footprint here:

https://brainly.com/question/282900

#SPJ4

2. Which of the following is not a characteristic of carbon that allows for the great variety of
organic compounds?

Carbon is able to form single, double, and triple bonds.
Carbon is able to form strong bonds with other carbon atoms.
Carbon possesses four valence electrons.
Carbon has a larger atomic radius than other Group 14 elements.
rhon ond

Answers

Answer:d

Explanation:

d

1. define mixtures with examples.
2. mentions the types of mixtures, define them and give 2 examples for each (Include colloids and suspensions too).

Answers

1) Mixtures involves substances that are mixed together.

2) Colloids , suspensions and solutions are types of mixtures.

What is a mixture?

We know that the term mixture can be used to describe any two substances that are not chemically combined together. In other words, the term mixture has to do with the putting together of substances that would not lead to any change in the individual properties of the substances that have been mixed together. Two common examples of mixtures are blood and air.

There are various types of mixtures that we have and these include;

Solutions: A solution is a mixture because there is no interaction that is going on chemically between the solute and the solvent.

Colloid: A colloid is a kind of mixture that is made up solutes that can still be seen with the optical eye. That is, the solutes are still large enough

Suspension: A suspension is a kind of mixture in which a solute is scattered in the solvent.

Learn more about mixtures:https://brainly.com/question/24898889

#SPJ1

QUESTION 39 CH3CO2H is called acetic acid. The name implies that
O a. It does not react with either acids or bases.
O b. It can donate an H+ ion to a base, and forms CH3CO2-
O c. It can react with acids, but does not react with bases.
O d. It can accept an H+ ion from a base, and forms CH3CO2H2+
O e. It can donate an electron to a base, and forms CH3CO2H+

Answers

Option B. Acetic acid has the formula C2H4O2. In order to distinguish it from its isomers, it is frequently written with CH3CO2.

Then, is CH3COOH a base or an acid. Because the ions in CH 3 COOH do not fully ionise to release H + ions when they are dissolved in water, it is a weak acid. As a result, there are less hydrogen ions in the acetic acid's final solution, which ultimately results in a weak acid.

Since CH3COOH does not release any OH- ions when dissolved in water, it is not an Arrhenius base. According to the Bronsted-Lowry theory for bases, a base is defined as a chemical that absorbs the proton from other molecules and uses it to form a conjugate acid.

To learn more about Acetic acid please click on below link

https://brainly.com/question/15202177

#SPJ4

Does Cupid have a gender?

Answers

They gave him the name Cupid, which is another name for Eros and also means "desire."For the Romans, Cupid was usually a cute little lad who carried out his mother's instructions to make individuals fall in love.

Does Cupid have a female counterpart?

Eros (Roman Cupid), the deity of love, and his wife PSYKHE (Psyche), the goddess of a soul.She was originally a mortal princess, and when mankind started to worship her instead of the goddess Aphrodite (Roman Venus), the goddess became enraged.

Who is the daughter of Cupid?

According to Apuleius, Voluptas and Volupta is indeed the daughter of Cupid and Psyche in Roman mythology.The Latin term voluptas, which is also known as that of the goddess for "sensual pleasures," signifies "pleasure" or "delight."She frequently hangs out with the Gratiae, also known as the Three Graces.

To know more about Cupid visit:

https://brainly.com/question/13516179

#SPJ4

Kinetic energy can come from other sources of energy. True False

Answers

Answer:

True

Explanation:

Sources include renewable energy sources such as the sun, wind, water, and geothermal heat. However, we also use artificial sources generated by humans, such as walking, vehicle motion, and system vibration.

Hope it helps

Does pewter keep drinks cold?

Answers

As a hardening agent, pewter is a tin-based alloy with varying quantities of antimony, bismuth, copper, and lead.  

Describe pewter.

As a hardening agent, pewter is a tin-based alloy with varying quantities of antimony, bismuth, copper, and lead.

Pewter drinkware maintains liquids at their ideal temperatures for a longer period of time, whether they are hot or cold. A Lovely And Enjoyable Lifetime.

Pewter drinkware maintains liquids at their ideal temperatures for a longer period of time, whether they are hot or cold.

Become familiar with pewter.

Visit

https://brainly.com/question/29627686

#SPJ4

An atom's electron configuration ends with 3p2. If another atom has eight more electrons, what would be the continuation of the electron configuration?

Answers

Answer:

3p6 3d4

Explanation:

3d will come after 3p => 3p 3d

p will hold maximum of 6 electrons while d will hold maximum of 10 electrons.

if there are 8 more electrons to 3p2, then 4 will fill 3p so it will become 3p6

then the other 4 will fill 3d to become 3d4

What will happen if there is a greater concentration of H+ in the intermembrane space of the mitochondria?

Answers

The greater concentration of H+ in the intermembrane space of the mitochondria more will be the more ATP production by ATP synthetase.

The high external  H+ ions concentration influences concentration within intermembrane space, which increases the amount of ATP produced by ATP synthase. The functioning of ATP synthase solely depend on the gradient of H+ ion concenteration. This gradient must have a high concentration in the intermembrane space and a low concentration in the matrix. H+ cannot flow through the outer membrane of the mitochondria but can do so through the inner membrane. By putting mitochondria in a low pH buffer, an H+ gradient is created, which ATP synthase can use to synthesize ATP.

Hence, movement of H + across ATP synthase generates ATP.

To know more about Buffer.

https://brainly.com/question/22821585

#SPJ4

the synthesis of ch3oh(g) from co(g) and h2(g) is represented by the equation above. the value of kc for the reaction at 483 k is 14.5. a mixture of co(g) and h2(g) is pumped into a previously evacuated 2.0 l reaction vessel. the total pressure of the reaction system is 1.2 atm at equilibrium. what will be the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l at constant temperature? responses less than 1.2 atm less than 1.2 atm greater than 1.2 atm but less than 2.4 atm greater than 1.2 atm but less than 2.4 atm 2.4 atm 2.4 atm greater than 2.4 atm

Answers

According to Boyle's law which is a law for constant temperature the  the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l  is 2.4 atmospheres.

What is Boyle's law?

Boyle's law is an experimental gas law which describes how the pressure of the gas decreases as the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains unchanged.

Mathematically, it can be stated as,

P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is maintained constant.

According to the equation the unknown pressure and volume of any one gas can be determined if two gases are to be considered.That is,

P₁V₁=P₂V₂

Substitution in above equation gives P₂=1.2×2/1=2.4 atmospheres.

Hence, the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l  is 2.4 atmospheres.

Learn more about Boyle's law,here:

https://brainly.com/question/1437490

#SPJ1

How many magnesium atoms are in MgO?

Answers

MgO contains three atoms in total, of which one is Mg and one was O.

Therefore, MgO contains only 1 atom of magnesium.

A chemical element was uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or even more electrons with negative charges that orbit it. The positively charged, comparatively hefty protons as well as neutrons that make up the nucleus may be present.

The positively charged nucleus is located in the middle of an atom. It must be composed of two types of closely grouped subatomic particles.

Protons, which possess a positive electric charge, as well as neutrons, that have no electric charge, are just particles.

Learn more about atoms here : -

https://brainly.com/question/13654549

#SPJ4

How many atoms are in MgO?

Answers

There are total 3 atoms in MgO, in which 1 atom is of Magnesium and 1 atom is of Oxygen.

Atom

An atom is a particle of matter that uniquely defines a chemical element. An atom consists of a central nucleus that is surrounded by one or more negatively charged electrons. The nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.

Nucleus

The nucleus  is a positively charged region at the center of the atom. It consists of two types of subatomic particles packed tightly together.

The particles are protons, which have a positive electric charge, and neutrons, which are neutral in electric charge.

Learn more about atoms here :-

https://brainly.com/question/1566330

#SPJ4

What reaction does a vitamin KH2-dependent enzyme catalyze? View Available Hint(s)
O It decarboxylates the y-carbon of a glutamate side chain.
O It carboxylates the y-carbon of an aspartate side chain.
O It carboxylates the ycarbon of a glutamate side chain.
O It carboxylates the ycarbon of a glutamine side chain.
O It carboxylates the P-carbon of a glutamate side chain.

Submit PartQ CoASH is used to activate carboxylic acids. What type of compound is formed between CoASH and a carboxylic acid? View Available Hint(s)
O anhydride
O thioether
O amide
O thioester
O mixed anhydride with phosphate

Submit ▼ Part H What role does ATP play in biotin-dependent enzymes?
O It puts a good leaving group on bicarbonate.
O It provides a strong base.
O It provides a strong nucleophile.
O It delocalizes electrons It reduces bicarbonate.

Submit Request Answer Part F TPP is the coenzyme required by pyruvate decarboxylase. What product is formed in that reaction? View Avallable Hint(s)
O acetaldehyde
O butanal
O formaldehyde
O acetone
O propanal
Submit

Answers

The glutamate side chain's gamma carbon is carboxylated by Q1, a vitamin KH2 dependent enzyme, and Q2. A thioester is created when carboxylic acid and coASH interact.

Thioesters are organosulfur compounds having the functional group RSC(=O)R'. By virtue of the thio- prefix, they are implied to be comparable to carboxylate esters (ROC(=O)R'), with the sulphur in the thioester acting as the linking oxygen in the carboxylate ester. Thioesters play a crucial role in metabolism. A notable illustration of this is the metabolism of fatty acids. The main metabolite, acetyl coa, is an ester that is predominantly generated when pyruvate undergoes oxidative decarboxylation or when B acids are broken down.

To learn more about carboxylic acid  please click on below link

https://brainly.com/question/4721247

#SPJ4

Write Lewis structures for the following molecules or ions. (Assign lone pairs, radical electrons, and atomic charges where appropriate.)F2CNH

Answers

Lewis structures of F2CNH is F2 - C - N - H.

The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea. is the foundation. of a Lewis. structure. An oxygen. atom, has six electrons. in its outer. shell. The arrangement of the atoms or molecules is given structure by the Lewis Dot Structure, which is represented by a pattern of dots, lines, and atomic symbols. A single atom, a covalent molecule, or a polyatomic ion can all be given a Lewis Dot Structure. The bonding between a molecule's atoms and its lone pairs of electrons is depicted in Lewis structures, also called Lewis-dot diagrams. Lewis structures can be combined with hybrid models to predict molecular geometry.

Learn more about Lewis structures here:

https://brainly.com/question/20300458

#SPJ4

What i the chief difference between two identical clay tile if one i hot and i cold

Answers

The chief difference between two identical clay tiles, if one is hot and one is cold, is in the amount of heat energy each contains.

Heat energy is a form of energy that is transferred from one object to another, and in this case, the hot tile contains more heat energy than the cold tile. Heat energy is transferred from one object to another through a process called conduction.

When one object is hotter than another, heat energy is transferred from the hotter object to the cooler object until both objects reach the same temperature. In the case of the two clay tiles, the hotter tile will transfer its heat energy to the cooler tile until the tiles reach the same temperature.

The amount of heat energy each tile has can also be measured. Heat energy is measured in joules, and the hotter tile will have a higher number of joules than the cooler tile. To measure the amount of heat energy each tile contains, a thermometer can be used, which will measure the temperature of each tile and then calculate the amount of heat energy each tile contains.

Learn more about conduction at : https://brainly.com/question/12136944

#SPJ4

At the start of the coal combustion experiment, the combined mass of the coal and
oxygen reactants was 100 grams. At the end of the coal combustion experiment, the
mass of the sample was 100 grams. Why does the scale showing the mass at the end
of the reaction give a mass of 100 grams, when there is only a small amount of solid
particles remaining on the scale?
OA. Additional oxygen was created during the combustion reaction
B. Additional coal was created during the combustion reaction.
OC. The mass of the coal particles remaining at the end of the experiment was
100 grams.
The mass of the carbon dioxide gas and other byproducts at the end of the
experiment was 100 grams.
A. Additional oxygen was created
B. Additional coal was created
C. The mass of the coal particles remaining at the end of the experiment was 100 grams
D. The mass of the carbon dioxide gas and other byproducts at the end of the experiment was 100 grams

Answers

The system was closed in which combustion experiment conducted. Thus, option D is correct.

What is meant by closed system?

A closed system is a system in which there is only transfer of energy is takes place this type of system is known as closed system.

Example - Transfer of heat from a cup of tea.

Mainly there are three type of system.

1:- Open System

2:- Closed System

3:- Isolated System

Open system:-

A system in which there is transfer of both energy and mass these types of system is called as open system.

Example:- Flow of water in a canals

Closed System:-

A  system in which there is only transfer of energy is takes place this type of system is known as closed system.

Example - Transfer of heat from a cup of tea.

Isolated system:-

A system in which there is no transfer of energy and mass these type of system is called as isolated system.

Example - A thermo flask

Therefore, the system was closed in which combustion experiment conducted. Thus, option D is correct.

The complete question is : At the start of the coal combustion experiment, the mass was 100 grams. At the end of the coal combustion experiment, the mass was 100 grams. During the combustion experiment, heat was transferred from the reaction vessel to the area surrounding the reaction vessel. What type of system was this combustion experiment conducted in?

A. isolated

B. insulated

C. open

D. closed

To learn more about Closed system refer to :

https://brainly.com/question/17597998

#SPJ1

Explain the processes involved in the flow of water, both above and below the ground. Be sure to use at least 5 vocabulary terms in your paragraph.

Answers

The hydrologic cycle, another name for the water cycle, describes where and how water is kept on Earth.

How the flow of water regulated?

In the atmosphere, on the surface of the land, and underground, water is kept in reserve. It could be a gas, a liquid, or a solid. Either fresh or salt water can be a liquid (salty).

Water flows between its storage locations. It flows on both extremely tiny scales and very big scales (via watersheds, the atmosphere, and below the Earth's surface) (in people, in plants, and in other organisms).

Water flows both naturally and as a result of human activity. The motion of water on Earth is sustained by the force of gravity and solar energy. The water cycle is impacted by human activity because it changes where water is.

For more information on water cycle kindly visit to

https://brainly.com/question/1151425

#SPJ1

According to the nemst equation, when ecell = 0 then: _______

(A) Q=K (B) K=1 (C) AG=0 (D) Ecell = 0

Answers

According to the Nerst equation, when Ecell = 0 then : A) Q = K, the nerst equation is then :

log Keq = (n E°) / (0.0592 V)

The Nerst equation is given as follows :

E cell = E°cell  - (0.0592 V / n ) log Q

the electrical potential of the cell is depend on the Q, that reaction quotient of the reaction. at equilibrium ΔG = 0 . the reaction quotient    Q = K and from the equation , ΔG = -nFE , ans E = 0, now the nerst equation is given as :

0 = E° - ( RT / nF ) ln K

0 = E° - ( 0.0592 V / n) log K

log K = (n E°) / (0.0592 V)

To learn more Ecell here

https://brainly.com/question/3807566

#SPJ4

Based on the differences in electronegativities, with which atom is francium (fr) most likely to form an ionic bond?

Answers

Answer: An ionic bond will be most likely formed between francium and chlorine having an electronegativity difference of 2.46.

Explanation:

Aldol Condensation Mechanism. Cyclopentanone Reacted With Trans-Cinnamaldehyde

Answers

The aldol condensation is a chemical reaction that occurs between a carbonyl compound and an alpha, beta-unsaturated carbonyl compound to form a new carbon-carbon bond, resulting in the formation of a new molecule. This reaction is an example of a crossed aldol reaction because the two starting compounds are not structurally similar.

In the case of cyclopentanone reacting with trans-cinnamaldehyde, the reaction occurs in the following steps:

Protonation of the alpha carbon of the trans-cinnamaldehyde by a strong acid such as hydrochloric acid (HCl). This step creates a resonance-stabilized carbanion intermediate.Attack of the carbanion intermediate on the carbonyl carbon of the cyclopentanone, forming a tetrahedral intermediate.Deprotonation of the intermediate by a base such as sodium hydroxide (NaOH) to form the aldol product.Dehydration of the aldol product forms the final product, which is a conjugated enone. This step is typically carried out by heating the mixture in the presence of an acid catalyst such as sulfuric acid (H2SO4).

Learn more about Aldol Condensation here: brainly.com/question/27178362
#SPJ4

What is the ratio of rms velocities of the molecules of two gases A and B?

Answers

The required ratio of rms velocities of the molecules of two gases A and B is 1:4.

What is Root mean square velocity of gas molecules?

Root mean square (R.M.S.) speed of a gas is a square base of the normal of the square of speed. In that capacity, it has units of speed. R.M.S. = M3RT. where R = gas consistent, T = temperature (in K), M = molar mass of the gas.

According to question:

We have,

M1 = 16, M2 = 2, T1 = 200k, T2 = 400K

Vrms = root(3RT/M)

Here,

Va/Vb =[tex]\sqrt\frac{200*2}{16*400} }[/tex]

Va/Vb= 1:4

R is constant

Thus, Required ratio is 1:4

To know more about Root mean square velocity visit:

brainly.com/question/1954525

#SPJ4

Q. What is the ratio of rms velocities of the molecules of two gases A and B whose molecular weights are 400 and 200 gm/mol respectively?

Question 2 Draw The Major Product Of The Elimination Reaction Shown.

Answers

An elimination reaction can have two products major and minor which are shown in the attached diagram below.

What is an elimination reaction?

An elimination reaction can be described as a type of organic reaction in which two substituents are eliminated from a molecule in either a one- or two-step mechanism.

The one-step mechanism is called the E₂ reaction, and the two-step mechanism is called the E₁ reaction. The kinetics of the reaction: E₂ is bimolecular or second-order while E₁ is a unimolecular or first-order reaction.

In cases where the molecule is capable to stabilize an anion but has a poor leaving group, a third type of reaction, E₁-CB.

The E₂ mechanism involves a one-step mechanism in which carbon-hydrogen and carbon-halogen bonds break to prepare a double bond.

E₁ stands for unimolecular elimination where the carbon-halogen bond breaks to give a carbocation intermediate and then deprotonation of the carbocation.

Learn more about elimination reactions, here:

https://brainly.com/question/29695970

#SPJ4

Which Of The Following Is The Best Michael Acceptor?

Answers

Answer:

I don't know because there is no option !!

What is the percent composition of a compound formed when 4.96 g of bromine combines with lithium to form 5.39 g of lithium bromide?

Answers

The mass of lithium required to react with 4.96 g of bromine is 0.372 g. The number of moles of each reactant is 0.062. Therefore the percentage composition of each element in the product is 50%.

What is percentage composition?

The percentage composition of a compound is the weight percentage of each element present in the compound contributing to the total weight of the compound.

The reaction between lithium and bromine gas is given below:

[tex]\rm Br_{2} + 2 Li \rightarrow 2LiBr[/tex]

As per this reaction one mole bromine gas reacts with 2 moles of Li.

mass of Br₂ = 160 g/mol

mass of Li = 6 g/mol

for 2 Li = 12 g/mol

160 g of Br reacts with 12 g of Li. Thus, mass of Li required by 4.96 g of bromine gas is:

4.96 × 12 / 160 = 0.372 g.

The number of moles of Br = 4.96/ 80 = 0.062

no. of moles of Li = 0.372 / 6 = 0.062

The number of moles of each element is equal and hence, the percentage composition is 50 % each of Li and Br.

To find more on LiBr, refer here:

https://brainly.com/question/7256732

#SPJ1

Bromine makes up 92.1% of the compound, while the remaining 7.9% is made up of lithium.

What is percent composition?

Percent composition is a way of expressing the proportion of each element in a compound as a percentage of the total weight of the compound.

To find the percent composition of an element in a compound, divide the weight of the element in the compound by the total weight of the compound, and then multiply by 100%.

In this case, the weight of bromine in the compound is 4.96 g, and the total weight of the compound is 5.39 g. Therefore, the percent composition of bromine in the compound is:

[tex](4.96 g / 5.39 g) * 100% = 92.1%[/tex]

This means that bromine makes up 92.1% of the compound, while the remaining 7.9% is made up of lithium.

Learn more about percent composition, here:

https://brainly.com/question/17505281

#SPJ1

The shielding effects help to explain:


why it is easier to take electrons from higher energy levels (these are larger atoms)


why it is easier to take electrons from smaller atoms


why it is harder to take electrons from higher energy levels (these are larger atoms)

Answers

The shielding effects help to explain why it is easier to take electrons from smaller atoms. Due to the fact that as the shielding effect increases, the ionization energy decreases.

what is shielding effects?

The shielding effect looks at how electrons closer to the nucleus tries to shield the electrons farther away from the positive charge of the nucleus which is the reduction in the effective nuclear charge on the electron cloud, as a result of difference in the attractive force.

what is electron shielding?

In a simple term Electron shielding is described as the blocking of valence shell electron attraction by the nucleus, which is as a result of the presence of inner-shell electrons.

learn more about shielding effect here:

brainly.com/question/25950742

#SPJ1

What are scope 4 carbon emissions?

Answers

The emission of carbon that are avoided are called scope 4 Carbon emission.

The scope for Carbon emissions are those emissions of carbon which are reduced or avoided.

They can also be defined as the reductions that have occurred outside of a products complete cycle or the value chain.

The product cycle are those which are related to the manufacturing cycle of the carbon related products.

Collectively all the greenhouse emissions that are avoided or which are reduced to a very significant level are known as scope 4 emissions.

To know more about carbon emission, visit,

https://brainly.com/question/1301348

#SPJ4

draw a stepwise mechanism for the following reaction

Answers

The OH group accepts the proton of sulphuric acid in the described reaction. As a result, one water molecule is removed.

Following the elimination, a secondary carbocation is formed, which undergoes a 1, 2-hydrogen shift to create a more stable tertiary carbocation. Furthermore, the alkene contributes electrons to the tertiary carbocation, resulting in the formation of a cyclic molecule.

The mechanism is shown below:

To know more about sulphuric acid click on the link below:

https://brainly.com/question/10220770

#SPJ4

Other Questions
The goal of the accounts receivable methods is to adjust the Allowance for Doubtful Accounts balance so that multiple choice The unadjusted balance is equal to the estimate of the uncollectible accounts receivable. The adjusted balance is equal to the estimate of the uncollectible accounts receivable. The adjusted balance is equal to the estimate of the uncollectible sales. The unadjusted balance is equal to the ending accounts receivable balance. Hannah invested $96,000 in an account paying an interest rate of 6\tfrac{1}{2}6 2 1 % compounded quarterly. Evelyn invested $96,000 in an account paying an interest rate of 6\tfrac{1}{4}6 4 1 % compounded monthly. To the nearest hundredth of a year, how much longer would it take for Evelyn's money to double than for Hannah's money to double? PLEASE HELP I WILL MARK BRAINLIEST!! James wants to cover a floor measuring 90 cm by 120 cm with square tiles of the same size.Given that he uses only whole tiles, find the largest possible length of the side of each tile Braden has m muffins. He splits them evenly among 4 boxes. Write an expression that shows how many muffins are in each box. A survey found that 20% of the people in Fiji drive the car without seatbelt. If 3 people are randomly selected, find the probability that at least 2 drive without seat. SDS definition and significance? Need help if you have the time and i need explanation for this (NO LINKS PLS) what was one effect of the fugitive slave act of 1850? (a) the Republican Party lost influence in the federal legislature (b) the Missouri Compromise was deemed unconstitutional by federal courts (c) tensions among the populations of northern and southern states increased (d) immigrants were forced to relocate from Eastern cities to western territories There are 3 gases in a container, methane has a partial pressure of 1.23 atm, ethane's partial pressure is 1.48 atm and an unknown pressure of propane. The pressure in the container was measure to be 4.43 atm. What is the partial pressure of propane?A) 1.72B) 1.35C) 1.69D) 1.53 Someone pls help:( im new tysm if u doo! A new savings account is opened with $400 and gains 3% every year. What is the value of the account at 32 years? Write 2 nouns that are feminine AND 2 nouns that are masculine. Then explain the reason. What is 2 2/13 divided by 2/3 In all of these organisms, which microscopic structures carry out major life functions? Captionless ImageA) ChloroplastsB) CellsC) WingsD) Antennea If a sound wave refracts, what happens to it? Select all that apply.It changes its speed and wavelength when it bounces off of a solid surface.BIt changes direction when it passes through an openingIt changes its speed and wavelength when it passes through an openingDIt changes direction when it passes from one medium to anotherEIt changes its speed and wavelength from one medium to another.FIt changes direction when it bounces off of a solid surface. Enviromental pollulationin Nepal This story is considered to be an early example of experimentation with stream of consciousness narration. Why might an author choose to narrate a story this way?From- An Occurrence at Owl Creek Bridge commonlitalso guys you know a cite to find the commonlits answer how can self awareness assist you in choosing subjects? Solve for x usingcross multiplication.4x - 44x - 47x + 3x = [?]