Answer: E. All of the above are supported by UNIX inodes
Explanation:
An inode refers to the data structure that's in the UNIX operating systems which consists of vital information that has to do with the files that's within a file system.
It should be niteec that when there's creation of a file system in UNIX, then a set amount of inodes will be created too.
The levels of indexing that the UNIX inodes were designed to support include the direct, single indirect, double indirect and the triple indirect. Therefore, the correct option is E.
What is edge computing?
Answer:
I basically means something like the cloud, where your data is uploaded to servers and is then processed and transferred back to you when you need it.
Explanation:
Hope this helps :)
A de-centrally-powered, fully accessible IT architecture that always enables mobile computer technology as well as internet technologies, is determined as Edge computing.
Processing is done through edge computing, instead of sent off to the server farm, either by the equipment rather than via a localized server computer system.
Examples of edge computing include:
Smart grid excellent analysis.Oilfield rigs security monitoring.Video streaming.Drone-enabled agricultural management.
Learn more about edge computing here:
https://brainly.com/question/22646214
what is gradient descent in neural networks?
Answer:
radient Descent is a process that occurs in the backpropagation phase where the goal is to continuously resample the gradient of the model's parameter in the opposite direction
The network performance is said to be biased when _________.
a) It performs well on train set but poorly on dev set
b) it performs poorly on train set
c) Both the options
d) None of the options
Answer:
the answer for the question is B
The network performance is said to be biased when it performs poorly on train set.
What is network performance?A measurement regarding service or the state of quality of network received by the consumer is known as network performance. Operators can control the upper limit of a network performance.
When network operators or service providers put a cap and lower the speed of a network on a train set, it is said to be a biased network performance.
Hence, option B holds true regarding network performance.
Learn more about network performance here:
https://brainly.com/question/12968359
#SPJ2
what are different between system and application software?
Answer:
System software is meant to manage the system resources. It serves as the platform to run application software. Application software helps perform a specific set of functions for which they have been designed. Application software is developed in a high-level language such as Java, C++, .Explanation:
Hope it helps ^-^
#CarryOnLearning
Blank Are input instructions you give to a computer
Explanation:
A computer is a machine that can be programmed to accept data (input), process it into useful information (output), and store it away (in a secondary storage device) for safekeeping or later reuse. The processing of input to output is directed by the software but performed by the hardware.
Which avenue may utilize video streaming, audio narration, print designs and animation?
The (blank) may utilize video streaming, audio narration, print designs and animation.
Answer:
Explanation:
Multimedia medium may utilize video streaming, audio narration, print designs and animation as they are all part of it.
Answer:
Explanation:
ans is multimedia as it contains all of 'em
To delete a persistent cookie, you Group of answer choices Use the Clear method of the HttpCookieCollection class Use the Remove method of the HttpCookieCollection class Set the Expires property of the cookie to a time in the past Set the Expires property of the cookie to -1
Answer:
Explanation:
To delete a persistent cookie, you a. use the Clear method of the HttpCookieCollection class b. use the Remove method of the HttpCookieCollection class c. set the Expires property of the cookie to a time in the past d. set the …
c. set the Expires property of the cookie to a time in the past
Demonstrate the register addressing mode for the following instructions. Also what addressing mode belongs to these instructions?
1. MOV CX, [BX+DI]
2. MOV AX, ARRAY[CX]
3. MOV BX, [CX+DI+6]
Answer:
Demonstrate the register addressing mode for the following instructions. Also what addressing mode belongs to these instructions?
1. MOV CX, [BX+DI]
2. MOV AX, ARRAY[CX]
3. MOV BX, [CX+DI+6]
A major university develops an assessment that is meant to provide data on whether potential students will be successful at the university level. If there is a relationship between the results of the assessment and student success, that will best indicate that the assessment has:___.
Answer:
Predictive validity.
Explanation:
A correlation can be defined as a numerical measure of the relationship existing between two variables (x and y).
In Mathematics and Statistics, a group of data can either be negatively correlated, positively correlated or not correlated at all.
1. For a negative correlation: a set of values in a data increases, when the other set begins to decrease. Here, the correlation coefficient is less than zero (0).
2. For a positive correlation: a set of values in a data increases, when the other set also increases. Here, the correlation coefficient is greater than zero (0).
3. For no or zero correlation: a set of values in a data has no effect on the other set. Here, the correlation coefficient is equal to zero (0).
A predictive validity can be defined as a measure of the extent to which a test score on a scale is able to predict scores based on certain criteria. Thus, it's a measure of the degree to which a certain criteria can predict future behavior or performance.
One of the most common area in which predictive validity is used is in university or college admissions such as in how scores on an assessment or test are related to performance based on a standard or criterion.
In this scenario, there exists a statistical relationship between the results of the assessment conducted and number of students who were successful. Thus, this will best indicate that the assessment has predictive validity.
What is a
a program
Answer:
-a collection of related measures or activities aimed at achieving a specific long-term goal.
-a set of pre-programmed software instructions for controlling the operation of a computer or other machine
-provide (a computer or other machine) with pre-programmed instructions for completing a task automatically
-Organize according to a schedule or plan.
Explanation:
Answer:
A program is an set of instructions given by a computer to perform particular task
Array unsortedArr contains an unsorted list of integers.
Array sortedArr contains a sorted list of integers.
Which of the following operations are NOT more efficient for sortedArr than unsortedArr? Assume the most efficient algorithms are used.
I. Searching for a given element
II. Finding the minimum
III. Inserting an element
a. Ill only
b. Il only
c. I only
d. I and II
e. I and III
Answer:
a. Ill only
Explanation:
This is because, for option III, in inserting an element, one only need the array key for the position in which to insert the element and this is irrespective of whether the array is sorted or not.
Whereas, options I and II are easier done in a sorted array than in an unsorted array.
write a program to display your name, age and address in c programming
Answer:
The program in C is as follows:
#include <stdio.h>
int main(){
char name[] = "Mr. Royal";
int age = 20;
char address[] = "Lagos, Nigeria";
printf("Your name is %s.\n", name);
printf("You are %d years old\n", age);
printf("Your address is %s.", address);
return 0;
}
Explanation:
This initializes the name
char name[] = "Mr. Royal";
This initializes the age
int age = 20;
This initializes the address
char address[] = "Lagos, Nigeria";
This prints the name
printf("Your name is %s.\n", name);
This prints the age
printf("You are %d years old\n", age);
This prints the address
printf("Your address is %s.", address);
Change the necessary details to yours
What most defines a community in the digital age?
A shop will give discount of 10% if the cost of purchased quantity is more than 1000. Ask user for quantity suppose, one unit will cost 100. Judge and print total cost for user. Plz give answer in C++.
Answer:
The program in C++ is as follows:
#include <iostream>
using namespace std;
int main(){
int qty;
float discount = 0;
cout<<"Quantity: ";
cin>>qty;
int cost = qty * 100;
[tex]i f (cost > 1000)[/tex] { [tex]discount=cost * 0.10[/tex]; }
cout<<"Cost: "<<cost - discount;
return 0;
}
Explanation:
This declares the quantity as integer
int qty;
This declares and initializes discount to 0
float discount = 0;
This prompts the user for quantity
cout<<"Quantity: ";
This gets input for quantity
cin>>qty;
This calculates the cost
int cost = qty * 100;
If cost is above 1000, a discount of 10% is calculated
[tex]i f (cost > 1000)[/tex] { [tex]discount=cost * 0.10[/tex]; }
This prints the cost
cout<<"Cost: "<<cost - discount;
Identify congruent triangles. Justify why these triangles are congruent?
1. Hanger
2. Watermelon
3. Triangle Ruler
4. Pizza
5. Triangle Roof house
1) SuperFetch is a memory-management technique that a) determines the type of RAM your system requires. b) makes the boot-up time for the system very quick. c) preloads the applications you use most into system memory. d) defragments the hard drive to increase performance.
Answer:
c
Explanation:
It preloads the apps and softwares that you use most into thr memory so that they can boot up faster.But it consumes more ram.
What security weaknesses/vulnerabilities exist in Wireless local area network device hardware and software?
Answer:
Explanation:
There are many weaknesses/vulnerabilities, some of which are the following...
Default Network Hardware, many individuals will go out and buy a new router and install it in their home. These devices come with a preset configuration including a preset security password which is many times a default password used for every router of the same model. This can be easily obtained by anyone who can then access the network.
Access Point hacking, an experienced individual can use a packet sniffer to detect the SSID that is frequently sent from the router in order to create an access point to be able to access the network.
WEP encryption is another vulnerability. These are very low security passwords that can be cracked using different software in a short period of time.
These are some of many vulnerabilities that wireless local networks have, but there are also many precautions and security measures that can be taken to prevent them.
What is a word processing program? Give examples of word processing programs.
Answer:
A word processor, or word processing program, does exactly what the name implies. It processes words. It also processes paragraphs, pages, and entire papers. Some examples of word processing programs include Microsoft Word, WordPerfect (Windows only), AppleWorks (Mac only), and OpenOffice.org.
Scenario: A robot is sitting in a chair with its arms facing down. Write an algorithm, using pseudocode, to make the robot:
1. stand up2. walk forward until it senses a wall3. turn around4. walk back to the chair5. sit down in its original starting positionFinally, output the total number of steps taken.Commands--------In addition to our standard pseudocode commands, you must also use the following robot control commands:sitstandstep (one step forward)raise arms (parallel to floor)lower arms (pointing to floor)sense (only if arms are raised)turn (90 degrees right)Immediately after issuing a sense command, you can check whether the robot is at the wall as follows:if at wallor alternativelyif not at wallAssumptions-----------You must assume the following facts:The robot's initial sitting position is directly facing the target wall.There are no obstacles between the robot and the wall.The wall is 1 or more exact steps from the chair.The wall is sensed when it is less than 1 step from the robot's arms.The length of the robot's arms are slightly less than the length of 1 step.Your solution-------------Your solution must include all of the following:Adequate commentsInitialization and use of at least one variableSequential flow of controlConditional flow of controlIterative flow of controlHandling of any special casesOutput of the total number of steps takenYour solution-------------Your solution must include all of the following:Adequate commentsInitialization and use of at least one variableSequential flow of controlConditional flow of controlIterative flow of controlHandling of any special casesOutput of the total number of steps taken
Solution :
[tex]\text{Algorithm to}[/tex] stand [tex]$\etxt{up:}$[/tex]
step [tex]1[/tex]: [tex]$\text{stand}$[/tex]
step 2: [tex]\text{raise arms}[/tex]
[tex]\text{Algorithm to}[/tex] walk [tex]$\text{until it senses}$[/tex] a wall:
step [tex]1[/tex]: [tex]$\text{stand}$[/tex]
step 2: [tex]\text{raise arms}[/tex]
step 3: [tex]$\text{wallSensed}$[/tex]=false
step 4: [tex]$\text{numberOfSteps}$[/tex] = 0
step 5: if([tex]$\text{wallSensed}$[/tex]==true) then
[tex]\text{lower arms}[/tex]
step
else
if(sense)
[tex]$\text{wallSensed}$[/tex]=true;
else
step
[tex]$\text{numberOfSteps}$[/tex]++;
step 6: display [tex]$\text{numberOfSteps}$[/tex] to reach the wall
[tex]\text{Algorithm to}[/tex] turn around:
Step [tex]1[/tex]: if([tex]$\text{wallSensed}$[/tex]==true) then
turn
[tex]\text{raise arms}[/tex]
turn
[tex]\text{Algorithm to}[/tex] walk back[tex]$\text{ to the chair}$[/tex]:
Step [tex]1[/tex]: [tex]$\text{turn around}$[/tex]
Step 2: for i=[tex]1[/tex] to [tex]$\text{numberOfSteps}$[/tex] do
step
[tex]\text{Algorithm to}[/tex] sit back down:
Step [tex]1[/tex]: sit
Step 2: Lower arms
What blockchain implementation resulted from bitcoin’s rejection of a recommendation to enhance its scripting language support? Ethereum Hyperledger Fabric Multichain IOTA
Question # 18
Dropdown
A(n)
is the tool that will help you the most when developing the content you will use in your presentation.
Your answer is outline.
An outline is the tool that will help you the most when developing the content you will use in your presentation.
What is presentation?A presentation is a method of communicating information from a speaker to an audience.
Presentations are usually demonstrations, introductions, lectures, or speeches intended to inform, persuade, inspire, motivate, build goodwill, or introduce a new idea/product.
An outline is a list of the main topics and subtopics that you intend to cover in your presentation in a hierarchical order.
It can assist you in ensuring that your ideas flow logically and that no important points are overlooked.
A storyboard, on the other hand, is a visual representation of your presentation that shows the order of your slides, the images or videos you intend to use, and the text that will go with them.
Thus, the answer is outline.
For more details regarding presentation, visit:
https://brainly.com/question/938745
#SPJ7
what are the process of boots up a computer?
Answer:
a boat causes a computer start cutting cs and max contain built in instructions in a rom or flash memory chip that are automatically excited on started up these instructions search for the operating system load it and pass control to itWrite an algorithm to sum to values
Answer:
There is no need to make an algorithm for this simple problem. Just add the two numbers by storing in two different variables as follows:
Let a,b be two numbers.
c=a+b;
print(c);
But, if you want to find the sum of more numbers, you can use any loop like for, while or do-while as follows:
Let a be the variable where the input numbers are stored.
while(f==1)
{
printf(“Enter number”);
scanf(“Take number into the variable a”);
sum=sum+a;
printf(“Do you want to enter more numbers? 1 for yes, 0 for no”);
scanf(“Take the input into the variable f”);
}
print(Sum)
Explanation:
hi there answer is given mar me as brainliest
The process of making changes to an information system to evolve its functionality, to accommodate changing business needs, or to migrate it to a different operating environment is known as _____________ maintenance.
Answer:
Corrective
Explanation:
An information system interacts with the overall system by receiving data in its raw forms and information in a usable format.
Information system can be defined as a set of components or computer systems, which is used to collect, store, and process data, as well as dissemination of information, knowledge, and distribution of digital products.
Generally, it is an integral part of human life because individuals, organizations, and institutions rely on information systems in order to perform their duties, functions or tasks and to manage their operations effectively. For example, all organizations make use of information systems for supply chain management, process financial accounts, manage their workforce, and as a marketing channels to reach their customers or potential customers.
Additionally, an information system comprises of five (5) main components;
1. Hardware.
2. Software.
3. Database.
4. Human resources.
5. Telecommunications.
Corrective maintenance can be defined as the process of making significant changes to an information system in order to evolve or transform its functionality, to accommodate and tolerate continuously changing business needs, or to migrate it to a different (new) operating environment.
This ultimately implies that, a corrective maintenance is performed so as to rectify (repair) faulty equipments or systems and to restore an underperforming resource to an operational or optimum status.
What protects your computer so that it doesn’t get a computer virus?
Internet Browser
Antivirus Software
Keyboard Protector
My Teacher
Answer:
Antivirus Software
Explanation:
I believe Antivirus Software.
Sorry if I am wrong.
Answer:
Antivirus Software
Explanation:
Antivirus scans the incoming files or code that has been passed through your network traffic. Companies who build these softwares maintain a database of viruses that are already known. That database teaches the antivirus to remove, flag or quarantine any viruses in your computer.
How can a DevOps team take advantage of Artificial Intelligence (AI)?
Answer:
AI/ML can help DevOps teams focus on creativity and innovation by eliminating inefficiencies across the operational life cycle, enabling teams to manage the amount, speed and variability of data. This, in turn, can result in automated enhancement and an increase in DevOps team's efficiency.
Explanation:
list with ecamples five important applications areas of computer today
Answer:
Banking
Education
Business
Engineering and Architectural designs
Health
Explanation:
Banking : Shifting from the manual method of having to input information into hard book ledgers. Data and payment information can now be stored on computers. This may be used to prevent information duplication, forecasting and efficient payment purposes.
Education : With the use of computers today, students can now take computer based tests which are not only easily accessible and curtails geographical issues, they are also faster.
Business : With computers, businesses can now manage and their store customer information, inventory management and sales tracking.
Engineering and Architectural designs : With computers, thesw fields can now boast of computer aided designs which allows experts produce both 2 and 3 - dimensional prototype of equipments, buildings, building plans or other engineering structures.
Health : Adequate health record, patient appointment, digitally monitored pulse rate are some of the uses of computers in medicine.
Given the following code segment, how can you best describe its behavior? i ← 1 FOR EACH x IN list { REMOVE(list, i) random ← RANDOM(1, LENGTH(list)) INSERT(list, random, x) i ← i + 1 }Required to answer. Single choice.
a. This code replaces everything in the list with random numbers.
b. This code shuffles the order of the numbers in the list by removing them and inserting them back in a random place.
c. This code removes all of the numbers in the list and inserts random numbers in random places in the list.
d. This code errors by trying to access an element at an index greater than the length of the list.
Based on the code segment, we can deduce: B. This code shuffles the order of the numbers in the list by removing them and inserting them back in a random place.
What is programming?Programming can be defined as a process through which software developer and computer programmers write a set of instructions (codes) that instructs a software on how to perform a specific task on a computer system.
Based on the given code segment, we can deduce that this code shuffles the order of the numbers in the list by removing each of them and then inserting them back in a random place.
Read more on computer codes here: brainly.com/question/25619349
Software that enables the organization to centralize data is called A. Data Repository B. Data Base Management System C. Data Warehouse D. Data Mart E. Data File
Answer:
B. Data Base Management System
Explanation:
A database management system (DBMS) can be defined as a collection of software applications that typically enables computer users to effectively and efficiently create, store, modify, retrieve, centralize and manage data or informations in a database. Generally, it allows computer users to efficiently retrieve and manage their data with an appropriate level of security.
Generally, a database management system (DBMS) acts as an intermediary between the physical data files stored on a computer system and any software application or program.
A data dictionary can be defined as a centralized collection of information on a specific data such as attributes, names, fields and definitions that are being used in a computer database system.
In a data dictionary, data elements are combined into records, which are meaningful combinations of data elements that are included in data flows or retained in data stores.
This ultimately implies that, a data dictionary found in a computer database system typically contains the records about all the data elements (objects) such as data relationships with other elements, ownership, type, size, primary keys etc. This records are stored and communicated to other data when required or needed.
Hence, a software that enables the organization to centralize data, manage the data efficiently while providing authorized users a significant level of access to the stored data, is called a Data Base Management System (DBMS).
Amy’s new summer job at the pool will put $9 per hour. Which term describes this type of hourly income?
A. Salary
B. Take-home pay
C. Wage
D. All of the above
Answer:
d
Explanation: