The tubes with lengths of 15, 45, and 75 cm are found to resonate with this wavelength. Additionally, resonance is seen for tubes with lengths of 25 and 75 cm and 31 and 93 cm.
For this reason, at the place where the tube is closed, we have a node, and at the open point, we have a belly; in this case, the fundamental wave is = 4L. To determine the length of the tube that has resonance, we must establish the natural frequencies of the tubes.
The following resonance, known as the first harmonic, is 3 = 4L / 3.
The next fifth harmonic resonance is 5 = 4L / 5, and we can see that its general form is n= 4L / n, where n = 1, 3, and 5.
Let's apply these terms to the issue at hand.
Start with the wavelength that is the shortest.
Lam equals 60 cm.
Let's determine the length of the tube this harmonica provides.
L = λ n / 4
n = 1 L = 60 will yield the shortest tube length. 1/4\s L = 15 cm
For n = 3 L = 60 3/4\s L = 45 cm
For n = 5 L = 60 5/4\s L = 75 cm
For n = 7 L = 60 7/4\s L = 105cm
We can see that the harmonics 1, 3 and 5 of the tubes with lengths 15, 45, and 75 resonate with this wavelength.
b) λ = 100 cm
For n = 1 L = 100 1/4\s L = 25 cm
For n = 3 L = 100 3/4\s L = 75 cm
For n = 5 L = 100 5/4\s L = 125 cm
There is resonance in the fundamental and third ammonium frequencies for lengths of 25 and 75 cm. L = 124 1/4 L = 31 cm
In the case of the second resonance, L = 124 3/4 L = 93 cm.
For tubes with lengths of 31 and 93 cm, resonance occurs in the fundamental and third harmonics.
Learn more about Wavelength here:
https://brainly.com/question/14363924
#SPJ4
why do the hair straighteners not turn on when only switch s2 is closed?
When only switch s2 is closed the hat straightener will not turn on because the switches are connected In series. for current to flow all the switches must be closed
What is a closed circuit?A closed circuit is a circuit without interruption, providing a continuous path through which a current can flow.. This can be likened to two path ways connected by a bridge to make transportation flow. In a circuit the bridge is the switch or key.
An open circuit is a circuit where the path has been interrupted or "opened" at some point so that current will not flow. An open circuit is also called an incomplete circuit.
When the switch is closed then we will have a closed circuit.
When multiple switches are connected in series with each other, they all must be in the closed position for current to travel through the circuit, thereby energizing the load. The load is the hat straightener here.
Therefore the the hat straightener will not turn on because if only s2 is closed because s1, s2 and s3 are connected in series.
learn more about closed circuit from
https://brainly.com/question/27979157
#SPJ1
Your car speeds around the 80-m-radius curved exit ramp of a freeway. A 70-kg student holds the armrest of the car door, exerting a 220-N force on it in order to prevent him self from sliding across the vinyl-covered back seat of the car and slamming into his friend. How fast is the car moving in meters per second and miles per hour? What assumptions did you make?
The speed of the car in miles per hour and meters per second is 2.2369
Explain about the speed?The first person to calculate speed by accounting for both the distance travelled and the amount of time required was the Italian physicist Galileo Galilei. Galileo described speed as the distance travelled in a unit of time.
The speed of anything indicates how quickly it is moving. Miles per hour (mph), kilometres per hour (km/h), and metres per second (m/s) are the three most used speed measurement units (mph).
A speedometer is the most effective tool for demonstrating instantaneous speed. Another method to state the speed of light is as 186,282 miles per second. The speed of sound in dry air is 343.2 metres per second. The term "escape velocity" refers to the speed necessary to escape the gravitational pull of the Earth.
Radius = 80 m
mass of the student m = 70
Force = 220
F/M =220 / 70
=3.14 m
3.14 = v2/80
=15.85m/s
1 m/s = 2.2369 miles per hour
To learn more about speed refer to:
https://brainly.com/question/13943409
#SPJ1
compare and constrast bragg's law of diffraction with the grating diffraction equation and the thin-film interference equation. here, we mean the equations that relate spacing and wavelength to the locations of maxima in the diffraction or interference pattern
Laue diffraction, which establishes the angles of coherent and incoherent scattering from a crystal lattice, is a specific example of Laue's law known as Bragg's law. An electronic cloud moves like an electromagnetic wave when X-rays strike a certain atom.
How does Bragg's law work?In physics, the Bragg law describes the relationship between the distances between atomic planes in crystals and the angles of incidence at which these planes generate the strongest reflections of X-rays, gamma rays, and particle waves like those linked to electrons and neutrons.
Waves from two independent sources that produce different wavefronts are said to be causing interference. On the other hand, diffraction is a word for secondary waves that result from the various components.
learn more about Bragg's law refer
https://brainly.com/question/13093777
#SPJ4
in fig. 11-37, a small, solid, uniform ball is to be shot from point p so that it rolls smoothly along a horizontal path, up along a ramp, and onto a plateau.then it leaves the plateau horizontally to land on a game board, at a horizontal distance d from the right edge of the plateau. the vertical heights are h1 ! 5.00 cm and h2 ! 1.60 cm. with what speed must the ball be shot at point p for it to land at d ! 6.00 cm?
The ball must be fired at point p with a speed of 6.635 m/s in order for it to settle at a distance of 6 cm.
Due to it,
Height h1 equals 5 cm
h2 = 1.6 cm tall
Distance d = 6 cm
We are aware that t = (h2/g2) = (1.6*)/9.8 = 0.57 s.
We are aware that distance is simply speed times time.
The expression may be written as d = V1* t V1 = d/t = 6/0.57 = 10.52 m/s based on the aforementioned assertion.
According to the work energy theory, mg(h1-h2) = 1/2* m* V12 - 1/2* m* V22.
When "m" is removed from both sides, 1/2* V12 - 1/2* V22 = g(h1 - h2) 9.8 (5 - 1.6) = 1/2* 10.522 - 1/2* V22 33.32 = 1/2(10.522 - V22) (10.522 - V22) = 66.64 V22 = 44.03 V2 = 6.635 m/s
In light of this, the recommended ball speed is 6.635 m/s.
Learn more about Speed here:
https://brainly.com/question/29852841
#SPJ4
Part A In addition to their remarkable top speeds, cheetahs have impressive cornering abilities. In one study, the sideways force on the feet of a 45 kg cheetah, with its claws dug into the ground, was found to be 960 N What was the cheetah's centripetal acceleration? Express your answer with the appropriate units. HÃ… ? a = Value Units Submit Request Answer Part B What was the radius of the turn if the cheetah was running at 20 m/s? Express your answer with the appropriate units. HA ?
Centripetal acceleration of cheetah is 21.3 m/s^2. the radius of the turn was approximately 18.9 meters.
To find the centripetal acceleration, we can use the formula a = v^2/r, where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the turn.
In this case, we are given the mass of the cheetah (45 kg) and the sideways force on its feet (960 N), so we can use the formula F = ma to find the acceleration.
F = ma 960 N = (45 kg)(a) a = 960 N / 45 kg a = 21.3 m/s^2
Now that we have the acceleration, we can use the formula a = v^2/r to find the radius of the turn if the cheetah was running at 20 m/s.
a = v^2/r 21.3 m/s^2 = (20 m/s)^2/r r = (20 m/s)^2 / 21.3 m/s^2 r = 18.9 m
To know more about Force
https://brainly.com/question/13191643
#SPJ4
A person is lying on a diving board 2.50 m above the surface of the water in a swimming pool. She looks at a penny that is on the bottom of the pool directly below her. To her, the penny appears to be a distance of 7.00 m from her. What is the depth of the water at this point?
2.50 m above the water's surface, a person is resting on a diving board in a swimming pool. The penny appears to be seven meters away from her in her field of vision.The depth of water from this point is 6m.
The distance of board from water surface is given as 2.50m and appeared distance of penny from eyes of the person in board is given as 7.00m so this means apparent distance of penny from eyes of the person is:-
Total appeared distance from eyes of the person when its above the board- distance of the board from surface of the water.
Which is given as
=7.00m - 2.50m
=4.5m.
As we look at something from rarer to denser medium the apparent depth of that object which appears to us decreases.
So real depth of water can be given to us by:-
Apparent depth=Real depth / vdr,
here vdr is refractive index of denser medium with respect to refractive index of rarer medium which is given by
vdr=vd / dr
=Refractive index of water / Refractive index of air
=43
Therefore apparent depth is
=4.54/3
=6m.
To know more about apparent depth using refractive index refer to this link below:-https://brainly.com/question/169845815
#SPJ4
A special type of electro-
magnetic wave that has a
frequency which we can see:
T
g assuming that 200 mev of energy is released per fission of u235 , the mass of that undergoes fission reactor of power 1MW will be approximatelya. 10^-2gb. 1gc. 100gd. 10.000g
Assuming that 200 Mev of energy is released per fission of u235 , the mass of that undergoes fission reactor of power 1MW will be approximately will be the correct option is a i.e. 10^-2g.
The mass of the material that undergoes fission in a reactor with a power of 1 MW, you need to know the number of fissions that occur per second in the fission reactor. The power of a reactor is the rate at which energy is released by the fission reactions taking place inside it. The energy released per fission of uranium-235 is 200 MeV.
The relationship between power, energy, and time is given by the equation:
Power = Energy / Time
Rearranging this equation to solve for the number of fissions per second gives:
Number of fissions/second = Power / (Energy/fission)
Putting the values from the problem gives:
Number of fissions/second = 1 MW / (200 MeV/fission) = 5 x 10^22 fissions/second
Since the mass of uranium-235 is approximately 235.04 g/mol, the mass of the material that undergoes fission in the reactor is approximately:
Mass = (Number of fissions/second) x (235.04 g/mol) / (6.022 x 10^23 fissions/mol) = 3.93 x 10^-2 g
So, the mass of the material that undergoes fission in the reactor is approximately 3.93 x 10^-2 g, which corresponds to the answer choice "a. 10^-2g".
To know more about fission reactor please refer: https://brainly.com/question/23276812
#SPJ4
Joe pushes a 50 kg box for 3 meters.
What is Joe's speed?
Explanation:
It is not possible to determine Joe's speed based on the information provided. Speed is a measure of how quickly an object moves over a given distance and is calculated by dividing the distance traveled by the time it took to travel that distance. In order to determine Joe's speed, we would need to know how long it took him to push the box 3 meters.
compare the frequency of an electromagnetic wave with the frequency of the vubrating charge that produces the wave
An electromagnetic wave's frequency is the same as the frequency of the vibrating charge that causes it. The amount of vibrations, or back and forth motions, that occur in a charge in a second, is known as its frequency.
What is meant by electromagnetic waves?Electromagnetic waves, often known as EM waves, are waves that are produced when an electric field and a magnetic field vibrate together. In other words, the oscillation of the magnetic and electric fields results in electromagnetic (EM) waves. In contrast to mechanical waves, electromagnetic waves can move through voids. This suggests that electromagnetic waves can travel into empty space in addition to through solid materials like air and rock.
What is the significance of electromagnetic?Food-borne microorganisms can be eliminated by the widespread use of electromagnetic radiation in food preparation. Recent research on the microwave or radio wave portion of the electromagnetic spectrum has found promising results for the inactivation of germs in food preparation.
To know more about Electromagnetic Waves visit:
https://brainly.com/question/3101711
#SPJ4
A 50.0 g block of copper whose temperature is 400 K is placed in an insulating box with a 100 g block of lead whose temperature is 200 K. (a) What is the equilibrium temperature of the twoblock system? (b) What is the change in the internal energy of the system between the initial state and the equilibrium state? (c) What is the change in the entropy of the system?
a) The equilibrium temperature of the two block system is 320k
b) The change in the internal energy of the system is zero.
c) The change in entropy is +1.72kj
a) We refer. to the copper. block as block. 1 and the lead block. as block 2. The equilibrium temperature T satisfies
m1c1 (T - Ti) + m2c2 (T - TI2) = 0
T = m1C1Ti1 + m2C2Ti2 / m1C1 + m2C2 = 50 × 386×400 + 100×128×200/50×386 + 100×128 = 320K
T = 320K
b)The internal energy of the two-block system does not change because it is thermally isolated from the outside environment.
C)The change in entropy is ΔS = ΔS1 + ΔS2 = m1c1ln(T /Ti) + m2c2ln(T/Ti)
Δs = +1.72kj
A state of disorder, randomness, or uncertainty is most frequently connected with the scientific notion of entropy, which is also a quantifiable physical attribute. The notion and the phrase are employed in a variety of disciplines, including classical thermodynamics, where they were initially identified, statistical physics, which describes nature at the molecular level, and information theory. It has wide-ranging uses in physics and chemistry, biological systems and how they relate to life, cosmology, economics, sociology, weather science, and information systems, particularly the transfer of information through telecommunication.
Learn more about entropy here:
https://brainly.com/question/17278266
#SPJ4
A flat uniform circular disk has a mass of 3.00 kilogram and a radius of 70.0 \text{~cm}70.0 cm. It is suspended in a horizontal plane by a vertical wire attached to its center. If the disk is rotated 2.50 \text{~rad}2.50 rad about the wire, a torque of 0.0600 \text{~N}\cdot \text{m}0.0600 Nâ‹…m is required to maintain that orientation. Calculate the rotational inertia of the disk about the wire.
The rotational inertia of the disk about the wire is 243 kilograms*meters^2.
The rotational inertia of a body about a given axis is a measure of the body's resistance to changes in its rotational motion. It is given by the formula I = ∑m*r^2, where m is the mass of each particle in the body, r is the distance of each particle from the axis of rotation, and the sum is taken over all particles in the body.
In this case, the body is a flat circular disk with a mass of 3.00 kilograms and a radius of 70.0 centimeters. The axis of rotation is the vertical wire attached to the center of the disk. To find the rotational inertia of the disk about the wire, we need to calculate the sum of m*r^2 for all the particles in the disk.
Since the disk is uniform, all the particles in the disk have the same mass. Therefore, we can simplify the formula for rotational inertia to I = mR^2, where m is the mass of the disk and R is the radius of the disk. Plugging in the values for m and R, we get
I = 3.00 kilograms * (70.0 centimeters)^2 = 24300 kilograms centimeters^2.To convert this value to the units of rotational inertia (kilogrammeters^2), we can use the conversion factor 1 meter = 100 centimeters. This gives us
I = 24300 kilogramscentimeters^2 * (1 meter / 100 centimeters)^2 = 243 kilograms*meters^2.Learn more about Rotational inertial here:
https://brainly.com/question/14001220
#SPJ4
two possible geometric shapes for the clf3 molecule are trigonal planar and t-shaped. the student does some research and learns that the molecule has a dipole moment. which of the shapes is consistent with the fact that the clf3 molecule has a dipole moment? justify in terms of bond polarity and molecular structure.
The trigonal planar shape is consistent with the fact that the CLF3 molecule has a dipole moment.
This shape is formed by three identical polar bonds that are arranged in a flat plane. Each of the three bonds has a slightly negative charge on the chlorine atom and a slightly positive charge on the fluorine atoms. This arrangement of charge creates a permanent dipole moment across the molecule, which is a result of the arrangement of the polar bonds and the molecular structure.
The t-shaped structure, on the other hand, has a single polar bond and two non-polar bonds, which would lead to a net dipole moment of zero, since the charges would cancel out. Therefore, the trigonal planar shape is the most consistent with the fact that the CLF3 molecule has a dipole moment.
For more questions like Dipole moment click the link below:
https://brainly.com/question/14674541
#SPJ4
you are standing at the top of a cliff that has a stairstep configuration. there is a vertical drop of 6 m at your feet, then a horizontal shelf of 6 m , then another drop of 4 m to the bottom of the canyon, which has a horizontal floor. you kick a 0.16 kg rock, giving it an initial horizontal velocity that barely clears the shelf below.1. What initial horizontal velocity v will be required to barely clear the edge of the shelf below you? The acceleration of gravity is 9.8 m/s2 . Consider air friction to be negligible. Answer in units of m/s.
2. How far from the bottom of the second cliff will the projectile land? Answer in units of m.
1. The initial velocity required to barely reach the edge of the shell below you is 6.67 m/s.
2. The projectile will land at 9.54 m of the second cliff d = 9.54 m
1. To find the horizontal velocity of the rock we need to use the following equation:
d = v * t
Where:
d: is the distance traveled by the rock
t: is the time
The time can be calculated as follows:
t = √2d/g
g: is gravity = 9.8 m/s²
t = √2d/g = 1.20s
Now, the horizontal velocity of the rock is:
v = d/t = 6.67m/s
Hence, the initial velocity required to barely reach the edge of the shell below you is 6.67 m/s.
To calculate the distance at which the projectile will land, first, we need to find the time:
t = √2d/g = 1.43s
the distance is:
d = v * t = 9.54m
Therefore, the projectile will land at 9.54 m of the second cliff.
Learn more about projectile here:
https://brainly.com/question/11422992
#SPJ4
the reason that buoyant force acts upward on a submerged object is that question 12 options: if it acted downward, nothing would float. it acts in a direction to oppose gravity. the weight of fluid displaced reacts with an upward force. upward pressure against the bottom is greater than downward pressure against the topof the submerged object.
Upward pressure against the bottom is greater than downward pressure against the top of the submerged object.
Buoyant Force:
The upward force applied to an object that is fully or partially submerged in a fluid is known as the buoyant force. Upthrust is another name for this upward thrust. A body submerged partially or completely in a fluid appears to shed weight or to be lighter, due to the buoyant force.
Learn more about Buoyant Force here
https://brainly.in/question/53520
#SPJ4
A newly discovered planet has twice the mass and three times the radius of the earth. What is the free-fall acceleration at its surface, in terms of the free-fall acceleration g at the surface of the earth?
A. 2/9 g
B. 2/3 g
C. 3/4 g
D. 4/3 g
A newly discovered planet has twice the mass and three times the radius of the earth. The free-fall acceleration at its surface, in terms of the free-fall acceleration g at the surface of the earth is 2/9 g
What is Gravitational Acceleration?The acceleration an object experiences as a result of gravitational force is known as acceleration due to gravity. M/s² is its SI unit. Its vector nature—which includes both magnitude and direction—makes it a quantity. The unit g stands for gravitational acceleration or free-fall acceleration . At sea level, the standard value of g on earth's surface is 9.8 m/s².
The free fall aceleration can be calculate as follows:
The acceleration due to gravity on Earth is
g= GM
R²
The acceleration due to gravity on the new planet is
gₙ= G2M
(3 R)²
gₙ= G2M
(3 R)²
Dividing the two equations we get
G2M
gₙ = 9 R² = 2 g
g GM 9
R²
Therefore, the free-fall acceleration at its surface, in terms of the free-fall acceleration g at the surface of the earth is 2/9 g.
Learn more about gravitational aceleration at https://brainly.com/question/14374981
#SPJ4
a block of mass 2.57 kg lies on a frictionless horizontal surface. the block is connected by a cord passing over a pulley to another block of mass 5.2 kg which hangs in the air, as shown. assume the cord to be light (massless and weightless) and unstretchable and the pulley to have no friction and no rotational inertia. The acceleration of gravity is 9.8 m/s2 Calculate the acceleration of the first block. Answer in units of m/s .
The acceleration of the two blocks are the same and it is 6.56 m/s².
The free-body diagram is in the attached picture.
Applying the Newton's second law of motion,
First block:
T = m₁a ....... (equation 1)
Second block:
m₂g - T = m₂a .... (equation 2)
Where:
m₁ = mass of the 1st block = 2.57 kg
m₁ = mass of the 2nd block = 5.2 kg
T = chord tension
a = acceleration
g = acceleration of gravity = 9.8 m/s²
Substitute equation 1 to equation 2
m₂g - m₁a = m₂a
( m₁ + m₂) a = m₂g
a = [m₂/( m₁ + m₂)] x g
= [5.2 / (2.57+5.2)] x 9.8
= 6.56 m/s²
Hence, the acceleration is 6.56 m/s²
Learn more about Newton's law here:
https://brainly.com/question/27829264
#SPJ4
we can measure the expansion rate of the universe, and how the expansion rate is currently changing. if the current trend continues, in the future the universe will be expanding
The expansion rate of universe is measured in terms of hubble's constant, the expansion rate of universe has increased and at some point in future, it will stop expanding and start to shrink.
There was a lot of uncertainty about the universe's expansion rate before the Hubble telescope was launched. This value is required to calculate the universe's age, estimate its evolution over billions of years, and comprehend the forces that drive it. Astronomers were initially ecstatic when the expansion estimate was reduced to 10% accuracy. They are now approaching one percent accuracy after much perseverance and precise observations.
The cosmic clock can be rewound and the age of the universe calculated by precisely determining the expansion rate, known as the Hubble constant. However, Edwin Hubble's estimates of the universe's expansion implied that it was younger than the Earth and Sun. As a result, Hubble concluded that the redshift phenomenon was a previously unknown property of space rather than a measurement of true space velocity. Redshift was later discovered to be a result of the expansion of space itself, as predicted by Einstein's theory of special relativity.
Thus, by the current data it is noted that the universe is expanding quickly than though before, and if this continues , in the future at some point the universe will stop expanding and it will start shrinking.
To learn more about universe expansion refer here
https://brainly.com/question/29672668
#SPJ4
g an intergalactic spaceship arrives at a distant planet that rotates on its axis with a period of t
a) Radius's general expression is R = ∛T²GM/4π².
b) The mass of the planet in kilograms if T = 26 hours and R = 2.1 × 108 m is 4.9 ×10²⁵kg.
a) The general definition of the radius is R = ∛T²GM/4π²
b) The mass of the planet throughout its geosynchronous orbit is 4.9 × 10²⁵ kg.
T = period of the orbit = 26hours
r = radius of the orbit = = 2.1 × 10⁸ m.
G = gravitational constant = 6.674×10⁻¹¹ m³⋅kg⁻¹⋅s⁻²
M = mass of the planet
Putting the value in the radius equation we get,
R = ∛T²GM/4π²
8.98 ×10⁷ m = ∛ (26 × 60 × 60)² ×( 6.67 ×10⁻¹¹) M/ 4×(3.142)²
M = (8.98 ×10⁷ m ×39.49 )/ (∛2.86 × 10¹⁸)
M = 4.9 ×10²⁵
As a result, the planet has a mass of 4.9 ×10²⁵kg throughout its geosynchronous orbital period.
Learn more about the orbital period at
https://brainly.com/question/29818580?referrer=searchResults
#SPJ4
The question is -
An intergalactic spaceship arrives at a distant planet that rotates on its axis with a period of T. The spaceship enters a geosynchronous orbit at a distance of R. a) From the given information, write a general expression for the mass of the planet in terms of G and the variables from the problem statement. b) Calculate the mass of the planet in kilograms if T = 26 hours and R = 2.1 × 108 m.
in this water supply system, areas of need are removed from the water source, perhaps because of a higher elevation or remote location. the pumps in the system provide water directly to the system as well as pumping water into storage tanks. by filling the tanks at times of low use, the pumps do not have to provide the total supply to the system at times of high use
A dry hydrant is a permanently erected conduit with pumper suction connections to facilitate quick drafting operations at stationary water sources.
Which style of fire hydrant is used in regions that experience extended periods of subfreezing weather?Barrel Dry Hydrants
In regions where the temperature goes below freezing, this sort of fire hydrant is fairly prevalent. In these regions, hydrants' barrels must be kept dry to prevent the water within from freezing.
A Class C fire hydrant is what?Class A: 1000–1499 gpm of maximum capacity. 3. Class B - 500 to 999 gpm of rated capacity. Class C: Capacity rated at less than 500 gpm.
To know more about dry hydrant visit:-
https://brainly.com/question/16603287
#SPJ4
a full moon appears larger on the horizon than it does overhead not because of the refraction of the atmosphere but because of an optical illusion. objects in the foreground influence the perceived size of objects in the background, and when the moon is on the horizon amid trees and houses the brain interprets it as being larger than when it appears overhead in the absence of those objects.
Moon Illusion is an Optical Phenomenon. This occurs because when the moon is near the horizon, Earthly things that resemble the moon on your retina generate a misunderstanding or inaccurate perception of distance and size.
The brain interprets the low moon as being bigger since it is lower in the sky than the higher moon. The mechanism behind size-distance perception in everyday life, which transforms planar pictures that fall on the retina into a perception of hard objects moving in space, is related to the moon illusion.
What happens when the mechanism acts in an uncommon circumstance is what causes the moon illusion. In typical perception, the angular size of the light image stimulating our eyes expands or shrinks as rigid objects move in depth (distance).
The sense of hard objects with shifting depth perception is produced naturally by the brain in response to these changing stimuli. The ground and horizon make the moon appear comparatively close when it is close to the horizon.
Due to the moon's shifting apparent position in depth while the light stimulus stays constant, the moon appears extraordinarily huge due to the brain's size-distance mechanism.
Learn more about Moon Illusion here:
https://brainly.com/question/13025783
#SPJ4
through a refinery, fuel ethanol is flowing in a pipe at a velocity of 1 m/s and a pressure of 101300 pa. the refinery needs the ethanol to be at a pressure of 2 atm (202600 pa) on a lower level. how far must the pipe drop in height in order to achieve this pressure? assume the velocity does not change. (hint: use the bernoulli equation. the density of ethanol is 789 kg/m3 and gravity g is 9.8 m/s2. pay attention to units!)
Δh = -13.101 m Far must the pipe drop in height in order to achieve this pressure.
13,101 m must be removed from the height.
Bernoulli went on to say that at whatever point along the fluid flow, the total amount of pressure, kinetic energy, and potential energy per volume is the same.
P+ 1/2 ρv² + ρgh = constant
Given
v = 1 m/s ⇒ constant
P₁ = 101300 Pa (1 atm)
P₂ = 202600 Pa (2 atm)
ρ ethanol = 789 kg/m3
g = 9.8 m/s2
Required
The height(lower level)
Solution
The Bernoulli equation becomes when v₁=v₂ constant
ρgh₁+P₁=ρgh₂+P₂
Solve for the value (height difference):
P₁-P₂=ρgh₂-ρgh₁
P₁-P₂=ρg(h₂-h₁)
(P₁-P₂)/(ρg) = Δh
- 101300 kg/ms² / 789 kg/m³ × 9.8 m/s² = Δh
Δh = -13.101 m
Learn more about height here:
https://brainly.ph/question/10055630
#SPJ4
an object is intiially hanging in equilibrium froma vertical spring. the object is pulled down 15 cm
The item is lowered 15 cm from its equilibrium point shown above before being let go at time t = 0. The item subsequently begins to oscillate with a 2.0 s period. Assuming that x = 0 represents equilibrium, upward motion is the positive direction.
What does a "object response" mean?A sentence's object is the portion on which the verb performs its action. In conventional English, a sentence is usually written with the object coming first. The verb, or what performs the action, is the subject.
What functions do things have?Things may be done to objects as well as done to them. A function or method object, for instance, may be coded to change the contents of a data structure or variable.
To know more about Objects visit:
https://brainly.com/question/14964361
#SPJ4
the picture shows different objects being weighed on scales. which ball will require the most force to lift? a the golf ball because it is the smallest in size b the beach ball because it is the largest in size c the soccer ball because it has the most mass d the baseball because it has the most material
Answer:
C. the soccer ball because it has the most mass
Explanation:
soccer ball - 410 g
beach ball - 110 g
baseball - 143 g
golf ball - 46 g
(i just took the test)
A sphere of mass mis dropped from the top of a building and reaches the ground before achieving terminal velocity. The force of air resistance that acts on the sphere as it falls is given by F, where is a positive constant and is the velocity of the sphere. What happens to the magnitude of the sphere's velocity and acceleration, and to the distance it falls during each second, as the sphere approaches the ground? Magnitude of Yelocity Magnitude of Acecloration Distance of all Each Second (A) Increases Increases Increases Increases Decreases Increases (C) Increases Decreases Decreases Decreases Increases Decreases (1) Decreases Decreases Increases
The magnitude of the sphere's velocity, acceleration, and to the distance it falls during each second is A)Increases Increases Increases .So, correct option is A.
We know that when an object is coming from a large height towards the surface of earth, due to air resistance it feels huge amount of opposition force which basically tries to decrease its velocity. The equation of force will be given by
F=mg + air resistance force
Since acceleration due to gravity is also responsible for acting of force, therefore, F will increase as when object comes closer to the surface air resistance is very high and due to that value of F is very large.
Same because of the high resistance force, velocity and distance will be also increases.
Hence, correct option is A.
To know more about velocity, visit here:
https://brainly.com/question/18084516
#SPJ4
A 20-N crate starting at rest slides down a rough 3 m long ramp, inclined at 30 degree with the horizontal. The force of friction between crate and ramp is 6 N. What is the kinetic energy of the crate at the bottom of the ramp? Zero 2 J 8 J 12 J 32 J
The velocity of the crate is 12 m/s and kinetic energy of the crate at the bottom of the ramp is 144.06 J.
Given that,
Weight of the crate = 20 N
Length of the ramp = 3 m
Inclination of the ramp with horizontal = 30°
The friction between the ramp and the crate = 6 N
Potential energy of the crate at the top = 20 * 3 sin 30° = 30 J
Energy lost due to friction = 6 N* 3 m = 18 J
Let the speed of the crate at the bottom be v.
Applying the law of conservation of energy,
30 - 18 = 1/2* (20/9.8)* v²
(12* 24)/2.04 = v²
v² = 141.18
v = 11.88 m/s ≈ 12 m/s
The kinetic energy of the crate at the bottom of the ramp = 1/2* m* v²
⇒ 1/2* (20/9.8)* 141.18 = 144.06 J
To know more about crate:
https://brainly.com/question/14298368
#SPJ4
match the items on the left with the correct definition on the right. 1 . radiant the top of a light wave 2 . speed of sound 1,100 feet per second 3 . speed of light the frequency of sound 4 . vibrations the bottom of a light wave 5 . pitch the cause of sound 6 . photons the loudness of a sound 7 . amplitude 186,000 miles per second 8 . trough longer wavelength than visible light 9 . crest particles of light energy 10 . microwaves energy of light
The sound speed Pitch at 1,100 feet per second, light speed at 1,860 miles per second, radiant sound frequency, top and bottom vibrations of a light wave, and pitch at 1,100 feet per second.
What exactly are wavelengths and frequencies?The wavelength is the separation between two wave crests, while troughs have the same wavelength. The frequency is the quantity of vibrations that cross a specific area in a second.
How do you calculate wavelength?The distance between any two identical locations on adjacent waves may always be used to calculate the wavelength. A longitudinal wave's wavelength is determined by counting the distance between each compression and the one after that, or from a rarefaction.
To know more about Wavelength visit:
https://brainly.com/question/13533093
#SPJ4
At which latitude on the Earth is the speed of Earth's rotation the slowest?
Answer:
North and South poles
Explanation:
To understand the basic principles underlying interference.
One of the most important properties of waves is the principle of superposition. The principle of superposition for waves states that when two waves occupy the same point, their effect on the medium adds algebraically. So, if two waves would individually have the effect "+1" on a specific point in the medium, then when they are both at that point the effect on the medium is "+2." If a third wave with effect "-2" happens also to be at that point, then the total effect on the medium is zero. This idea of waves adding their effects, or canceling each other's effects, is the source of interference.
Part C
In talking about interference, particularly with light, you will most likely speak in terms of phase differences, as well as wavelength differences. In the mathematical description of a sine wave, the phase corresponds to the argument of the sine function. For example, in the function y=Asin(kx), the value of kx at a particular point is the phase of the wave at that point. Recall that in radians a full cycle (or a full circle) corresponds to 2? radians. How many radians would the shift of half a wavelength from the previous part correspond to?
Express your answer in terms of ?.
Shift of half a wavelength from the previous part correspond to π radian.
What is the principle of interference?Interference is a phenomenon in which two waves combine by adding displacement together at every single point in the space and time, to form a resultant wave of greater, lower, or same amplitude.
The superposition principle explains that when two or more waves overlap in space, then the resultant disturbance is equal to the algebraic sum of individual disturbances
Given, Wavelength= λ
We have to find the phase difference when wavelength is half of the initial wavelength.
So, the path difference= Δx = λ/2
As, phase difference= 2π/λ * Δx
So, phase difference= 2π/λ * λ/2
Thus, phase difference= π radian
To know more about superposition of waves, refer
https://brainly.com/question/16602771
#SPJ4
TRUE/FALSE. a pan of enchiladas is served at a dinner party. its starts to cool according to newton's law of cooling
False. A pan of enchiladas is served at a dinner party and it does not start to cool according to Newton's law of cooling.
Newton's Law of Cooling states that the rate of heat loss of a body is proportional to the difference in temperatures between the body and its surroundings. This means that the hotter an object is compared to its surroundings, the faster it will cool.
Therefore, the rate of cooling of the enchiladas would depend on the temperature of the environment in which it is served. If the environment is a warm room, for example, the pan of enchiladas would cool at a slower rate than if it were served in a cold room.
For more questions like Newton's law of cooling click the link below:
https://brainly.com/question/29672785
#SPJ4