Type the correct answer in each box to complete the table. Use numerals instead of words.
Determine the least common multiple of the charges for each combination of elements in the table. Ignore the plus (+) and minus (−) signs of the charges and just enter numerals. The first row is completed for you.

Type The Correct Answer In Each Box To Complete The Table. Use Numerals Instead Of Words.Determine The

Answers

Answer 1

The least common multiple of the charges for each combination of elements in the table. Ignoring the plus (+) and minus (−) signs of the charges and just entering the numerals. The table is complete as follows.

                          chlorine(Cl)      oxygen(O)         nitrogen(N)

Lithium(Li)                 1                        2                     3

magnesium(Mg)        2                       1                      3

aluminium(Al)            3                       2                     1

How charged species formed?The charged species formed by losing and gaining of an electrons from an atoms and which called ions.If an atoms lose one and more an electrons then positive charged species formed called cation. If an atoms gain one and more an electrons then positive charged species formed called an anion.

To learn more about charged species here.

https://brainly.com/question/20308527

#SPJ2

Answer 2

Answer: the first one is incorrect

Explanation:


Related Questions

what element is 1s2 2s2 2p3

Answers

The element should be Nitrogen.

Give 2 reason why cryolite is used

Answers

two reasons why cryolite is used in the electrolysis of aluminium oxide. The mixture of cryolite and aluminium oxide has a lower melting point than pure aluminium oxide. This means a lower amount of energy is required to establish effective conditions for electrolysis and thus makes it more cost effective.

Give two reasons why cryolite is used in the electrolysis of ...https://www.mytutor.co.uk › answers › GCSE › Chemistry

How does a phase change from solid to liquid occur in a substance?(1 point)

Answers

Answer:

As heat is added to solid water, the temperature increases until it reaches 0 °C, the melting point. At this point, the phase change, added heat goes into changing the state from a solid to liquid. Only when this phase change is complete, the temperature can increase.

hope this helps

Heat is responsible for the change of phase from solid to liquid state.

A phase change from solid to liquid occur in a substance by heating of that substance because the bonds present between solid particles can be broken down with the help of heat energy.

When the bond is heat at the temperature on which it is broken down, the solid particles are converted into liquid substance so we can conclude that heat is responsible for the change of phase from solid to liquid state.

Learn more: https://brainly.com/question/25664350

In a few minutes, you will work with your partner to create three dances—one for each of the three phases. Each dance will represent the molecular freedom of movement of that particular phase.

If needed, navigate back to My Work to refer to your homework from Lesson 1.4. Then, begin brainstorming ideas for movements that would show these phases.

Dance ideas for solids:


Dance ideas for liquids:

Dance ideas for gases:

Answers

Stay still and shake for solids cause they can’t move move a little bit in a circle for liquid and move around a lot and really fast for gas

Which of the following are needed to calculate the percent yield? Select all that apply. Question 10 options: Theoretical yield Actual yield Excess yield Limiting yield

Answers

Both theoretical and actual yields would be needed to calculate percent yield.

The percent yield of a reaction is defined as the ratio of the actual yield to that of the theoretical yield. It can be mathematically expressed as:

percent yield = actual yield/theoretical yield x 100%

The actual yield is the amount of a specific product produced from a reaction while the theoretical yield is the stoichiometric amount of the same product.

More on percent yield can be found here: https://brainly.com/question/2506978?referrer=searchResults

what is the total number of valence electrons in ethyl acetate?

Answers

Answer: There are 36 valence electrons.

Explanation:

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the valence electrons of C₄H₈O₂ is 32.

What is element?

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

A valence electron is a negatively charged particle, located in the outermost shell of an atom, that can be transferred to or shared with another atom. To calculate total valence electrons in C₄H₈O₂, we need to add the individual valence electrons of each element.

Valence electrons of C₄H₈O₂= {valence electrons of C×4}+{valence electrons of H×4}+{valence electrons of O×2}

Valence electrons of C₄H₈O₂= {4×4}+{1×4}+{6×2}

Valence electrons of C₄H₈O₂=32

Therefore, the valence electrons of C₄H₈O₂ is 32.

To know more about element, here:

brainly.com/question/8460633

#SPJ5

Four preparations involving table sugar (sucrose) are described below. Analyze the sugar preparation processes and the end products.

Sugar Water Sugar Floss Sugar Caramel Rock Sugar

Sugar is added to water, and the water is stirred until the sugar is no longer visible. Sugar is melted and blown with a fan to make thin threads of solid sugar. Pure sugar is melted and cooked until it changes color and becomes a thick, sticky liquid. A highly concentrated solution of sugar water is prepared, large sugar crystals are allowed to form slowly, and then dye is added.


Which of the following is evidence that a chemical reaction has taken place in one of the processes?
A.
the melting and re-solidification of sugar into threads, which are different from sugar’s natural cube-shaped crystals
B.
the slow growth of giant sugar crystals from a highly concentrated sugar-water solution and added dye
C.
the dissolution of solid sugar in water to form a thin, colorless, odorless liquid
D.
the color change that takes place after heat melts and begins to decompose the sugar

Answers

Answer:

b

Explanation:

Answer: d:the color change that takes place after heat melts and begins to decompose the sugar

Explanation:i did the study island

what happens to the size of the an atom when it becomes an negative ion?

Answers

Answer

The negative ion is larger than the original atom.

Explanation:

This means that with fewer electrons but the same number of positive protons, the size of the ionic radius will decrease.

I hope this helped!

IS N2 (diatomic molecule of nitrogen considered a chemical compound can it be split into two or more simpler substances?

Answers

2Oh+6ho=45737E Electrolysis

in a petri dish, a certain type of bacterium doubles in number every 30 minutes. there were originally 16, or 2^4, bacteria in the dish. after 150 minutes, the number of bacteria has doubled 7 times, multiplying by 2^7. Now the population of bacteria is 2^4 • 2^7. Expressed as a power, how many bacteria are in the petri dish after 150 minutes? A. 2^28 B. 2^11 C.4^11 D.2^7

Answers

Answer:

D

Explanation:

Answer:

its not D it's B trust me

Explanation:

why does reducing solute particle size increase the speed at which the solute dissolves in water .

Answers

Because it has less surface area. This can be applied to something like cooking potatoes. Cooking a larger potato will take longer than a small potato.

In what respect does 3s sub-Shell differ from 4s sub-shell?​

Answers

Answer:

in the energy and in the principal quantum number (n)

Explanation:

the energy of 3s sub-shell is less than 4s sub-shell

and the principal quantum number of 3s sub-shell (n)= 3 but the principal quantum number of 4s sub-shell (n) = 4

Answer please
........................................

Answers

Answer:

The answer would be:

C. Potassium and magnesium

Explanation:

because the only have valence electrons

Why do elements in the same group have similar physical and chemical properties

Answers

Answer:

Each element within a group has similar physical or chemical properties because of its atom's outermost electron shell (most chemical properties are dominated by the orbital location of the outermost electron).

Explanation:

what general statements can you make about the relationship between the color of a solution and the color of light it absorbs?

Answers

The color absorbed is the complementary color to the color we perceive.

The color absorbed by an object and the color we perceive are complementary. All objects that we see have different colors. The color we see is always opposite to the color absorbed by the object in the color wheel.

Hence, the color wheel can be used to show the relationship between the color perceived and the color absorbed by the object. The color absorbed is the complementary color to the color we perceive.

Learn more: https://brainly.com/question/1446583

Choose all the answers that apply. According to Newton's second law of motion: objects at rest will remain at rest unless acted upon by an outside force the greater the magnitude of force, the faster the acceleration mass has an inverse relationship with acceleration every action has an equal and opposite reaction acceleration is caused by unbalanced forces​

Answers

Answer: The answers aplicable would be

1) The greater magnitude of force, the faster the acceleration.

2) Acceleration is caused by unbalanced forces.

how long do fresh cranberries last in the refrigerator?

Answers

Answer:

Three to four weeks

Explanation: I had cranberries and In like four weeks my mom forced me to get rid of them. They do stink when rotten ;(

Phosphorus reacts with oxygen to form diphosphorus pentoxide: 4 P(s) 5 O 2(g) ---> 2 P 2O 5(s) If 0.97 moles of phosphorus are reacted how many moles of P 2O 5 are produced

Answers

4P(s)+5O2(g)-->2P2O5(s)

4 moles of P=2moles of P2O5

0.97 moles of P=(2*0.97)/4

=0.485 moles

ignore q above 6 NO LINKS and please answer all question 6-9 and parts ​

Answers

Where is the question?

Please help. A 208 g sample of sodium-24 decays. How much of this radioactive isotope will remain after 3 half
lifes?

Answers

Answer: The information about sequential order of the event occurred in the past can be obtained by using only relative dating method.

Explanation:

Relative dating method doesn’t give information about when it happened. It provides sequential order of the events. It is the art of deciding the overall happening of past occasions (i.e., the age of an item in contrast with another), without fundamentally deciding their outright age (for example evaluated age).

In topography, shake or shallow stores, fossils and lithologies can be utilized to correspond one stratigraphic segment with another.

At a pressure of 125 atm, a sample of a gas has a volume of 150 L. What pressure does it have when the gas is compressed to 40 L? show work

Answers

Answer:

???

Explanation:

I have no clue sorry

The reactants A and B react completely in a sealed container to form a product. What is the mass of the product of the reaction between 3.0 grams of reactant A and 5.7 grams of reactant B?

Answers

Answer:

I'm pretty sure it is 8.7

Explanation:

and btw you are fineeee

Which of the following statements about trash in the United States is FALSE? Each person produces about 2 kg of trash per day. There is nothing we can do to reduce the amount of trash we throw away. Most of our trash ends up in landfills. Some of the things we throw away are very hazardous.

Answers

Answer:

There is nothing we can do to reduce the amount of trash we throw away.

Explanation:

We can reuse and recycle the trash that we throw away, so we can do something to reduce the amount of trash that we throw

The table below gives the atomic mass and relative abundance values for the three isotopes of element M.

Relative abundance (%) Atomic mass (amu)
78.99 23.9850
10.00 24.9858
11.01 25.9826

What is the average atomic mass (in amu) of element M?
2.86
5.36
24.30
24.98

Answers

Answer:

24.30

Explanation:

Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.

(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)/100

24.30 is the average atomic mass (in amu) of element M.

What is an atomic mass?

Atomic mass is the quantity of matter contained in an atom of an element.

Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.

(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)

2430.501576 ÷ 100

24.30

Hence, 24.30 is the average atomic mass (in amu) of element M.

Learn more about atomic mass here;

https://brainly.com/question/14250653

#SPJ2

What is the pressure in millimeters of mercury inside a container of gas.

Answers

Atmospheric pressure is 754.6 mm Hg and the density of mercury is 13.546 g/mL.

2. How many of valence electrons do the elements in column 4 have? Are these elements very reactive?
Explain your answer.

Answers

Answer:

4

Explanation:

Elements in group 14 have 4 valence electrons. Meaning that to achieve a stable octet they need to either gain or lose 4 electrons in total.

PLEASEE HELPPP!!!!
Hydrogen bonds can be found between molecules of which substance?
1.) CH4
2.) H2
3.) C4H10
4.) NH3

Answers

Answer:

3.) NH3

Brainliest if this helps please? (:

how many grams of water are needed to produce 250 j of energy when the temperature changes from 21 to 18.5

Answers

Answer:

So if you want to raise the temperature of that one gram from 19 to 35 degrees, that same gram will need 35 −19 = 16 times as much heat. And if you want to raise the temperature of 193 grams in stead of just 1 gram, you will need 193 times as much heat.

Explanation:

Joe the scientist wants to figure out if the weight of a bowling ball will affect how fast it rolls down a ramp. Joe builds a 15 foot long ramp that is 5 feet tall at the top. Joe believes that if he rolls the 6 pound bowling ball from the top of the ramp, then it will roll the fastest. Joe then gets several bowling balls that are identical except for their weight. The different weights are 6 pounds, 8 pounds, 10 pounds, 12 pounds, and 14 pounds. Joe starts by placing the 6 pound ball at the top of the ramp and he starts the timer at the same time he lets go. He stops the timer when the ball reaches the bottom of the ramp. Joe repeats this process for all of the bowling balls. Joe repeats this process for all of the bowling balls.

What’s the IV, DV, hypothesis and constant ?

Answers

Answer:

IV: The weight of the ball

DV: Time it takes for the ball to roll from top to bottom

Hypothesis:  6 pound bowling ball from the top of the ramp, then it will roll the fastest.

Constant: I dont know

Explanation:

A copper sulphate solution contained 0.100 moles of copper sulphate dissolved in 0.500 dm cubed of water. Calculate the mass of copper sulphate in 30.0cm cubed of this solution. Relative formula mass (mr): CuSO4= 159.5

Answers

Answer:

cm^3 —> dm^3

divide by 1000

159.5 — Mr of CuSO4

n (moles in mol) = c (concentration in mol/dm^3) * v (volume in dm^3)

0.100 mol of CuSO4 dissolved in 0.5dm^3 of water

calculate for mass of CuSO4 dissolved in 0.03dm^3  (30cm^3) of the solution

n = m/Mr

m = n*Mr

if 0.1 mol is dissolved in 0.5 dm^3 of water

0.5/0.03 ≈ 16.66666667

0.1 = 0.05

0.1 / 16.66666667 = 0.006

0.5 / 16.66666667 = 0.03

0.006 (mol of CuSO4) = 0.03 (dm^3 solution)

0.006 * 159.5 = 0.957 g

I think this is the answer

The mass copper sulphate CuSO₄ in 30ml solution is 957.6g.

How to determine the mass of copper sulphate  in the given solution?

To determine the mass of copper sulphate in the given solution, compare both the molarity given  

M₁V₁=M₂V₂

n₁/V1=n₂/V2

0.1/0.5=n₂/30         cm³=ml

n₂=6 moles

6×159.5=957.6g

Multiply the calculated moles with the relative mass/molecular mass to get the mass of CuSO₄.

hence, the mass of CuSO₄ is 957.6g

Learn more about dilution equation.

https://brainly.com/question/11493179  

#SPJ2  

Other Questions
Discuss the differences between the two citations systems. MLA AND APA in your own words, please dont waste my time Which polymer structure should be used if a strong and heat - resistant adhesive is required? 1. Linear 2. Branched 3. Networked 4 . Cross - linked How do the Lochner and Muller cases illustrate the ways the legal system treated women differently than men at this time? lucio es un poco bromista al llegar a la torteara dijo: me da dos tercios de torta y media el dependiente que si sabia matemticas lo despacho correctamente*Que cantidad de torta le dio?*como resolviste el problema? What is the value of x? How to find displacement from velocity. Did America have the right to take over other nations ? Why or why not The _____________ experiences a temperature increase primarily due to the absorption of gamma rays and X-rays. think about the information system your current / past employer used in everyday operations how would you redesign that information system to make it more efficient provide a summary of your actions / decisions for each step of the design process IDENTIFY TWO SEGMENTS THAT ARE MARKED PARALLEL TO EACH OTHER.PLEASE HELP, WILL GIVE BRAINLIEST. what factors are examined by the field of demography? check all that apply. (+4)-(+4)-(-10)+(+4)-(+8)+(-16)-(-10) I only need the procedure Thanks 1. A student pushes horizontally on a book with a force of 2 N, which causes the book to slide at a constant velocity. What is the force of friction on the book? Select the correct answer. Does the sentence have a compound subject? The tissue Karen buys is inexpensive. A. Yes B. No How did geography affect peoples choices of where to settle in ancient Egypt and Kush? no links pls reescriu els errors de concordana entre el subjecte i el verb del predicat- Les eines de de jardineria sha rovellat. All but sampson _coffee a)like b)likes True or False: Microbiomes are found only within the body of a host, which may be animal, plant, fungal, or even protist. Where is air pollution the worst?rural areasmountainscoastal regionscities Please take a look at the picture