two different types of rope with different properties are fused together to make one long rope. when a wave transfers from the first type of rope to the second type of rope, the wavelength becomes one-fourth of what it was before the transfer. what is true about the speed of the wave?

The correct answer is A) 146 p, 92 n, 92 e. This is because the atomic number of uranium (U) is 92, which means it has 92 protons in its nucleus.

The atomic mass of uranium is 238, which means it has a total of 238 particles in its nucleus. To find the number of neutrons, you subtract the atomic number (92) from the atomic mass (238), giving you 146 neutrons. Finally, because the atom is neutral (has no overall charge), it must have the same number of electrons as protons, so there are also 92 electrons in one atom of 238U.

learn more about uranium Refer: https://brainly.com/question/31187694

#SPJ11

The object that will most likely absorb sound would be a blanket. That is option C

A sound energy is the type of energy that travels through vibrations in air and can be heard through human ears or detected using specialised equipments.

The properties of sound energy include the following:

Blankets are less solid in nature than rocks,wall and floors in which sound waves can easily bound off from.

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

The Human Movement System's relative ability to produce, reduce, and dynamically stabilize forces in all three planes of motion is defined as the system's neuromuscular efficiency. Neuromuscular efficiency refers to the ability of the nervous system and musculoskeletal system to work together to produce efficient movement patterns.

The human body moves in three planes of motion - sagittal (forward and backward), frontal (side-to-side), and transverse (rotational).

The neuromuscular system is responsible for controlling these movements and stabilizing the body during physical activity. Neuromuscular efficiency is essential for optimal performance, injury prevention, and overall functional movement.
The Human Movement System's ability to produce, reduce, and dynamically stabilize forces in all three planes of motion is referred to as neuromuscular efficiency.

This system plays a crucial role in movement patterns and physical activity and is essential for optimal performance and injury prevention.

For more information on planes of motion kindly visit to

https://brainly.com/question/30463256

#SPJ11

Since the two charges are symmetrically positioned with regard to the origin and have equal magnitudes but opposite signs, the location where the electric field is zero is at the origin.

Using the formula for the electric field produced by a point charge, we can determine the location on the x-axis where the electric field is zero:

[tex]E = k*q/r^2[/tex]

where r is the distance between the point charge and the location where the electric field is being measured, q is the charge of the point charge, E is the electric field, k is Coulomb's constant, and so on. The total electric field for the two charges in this issue may be determined at any location along the x-axis using the principle of superposition. The electric field vectors produced by the two charges will cancel out at some point along the x-axis because they are symmetrically positioned with respect to the origin and have opposite signs. We may determine the electric field vectors produced by each charge at various locations along the x-axis using the formula for the electric field produced by a point charge. We can determine the overall electric field at each place by combining these vectors together. We may determine the location where the electric field is zero by charting the total electric field as a function of the x-axis position. We discover that in this instance, the two charges produce identical, opposing electric fields that cancel one another out at the origin. Because of this, the origin is where the electric field is zero.

learn more about electric field here:

https://brainly.com/question/15800304

#SPJ11

Zoologists studying the ecology of the Serengeti Plain estimate that the average adult cheetah can run 100 km/h and the average springbok can run 65 km/h. If the animals run along the same straight line, start at the same time, are each assumed to have constant acceleration, and reach top speed in 4 s then the cheetah must be within 2475 meters of the springbok at the start of the chase to catch it in 15 seconds.

Let's start by assuming that both the cheetah and the springbok accelerate uniformly from rest to their respective top speeds in 4 seconds. We can then use the following kinematic equations to solve for the distance between the two animals at the start of the chase

For the cheetah

vc = ac t

dc = (1/2) ac [tex]t^{2}[/tex]

For the springbok

vs = as t

ds = (1/2) as [tex]t^{2}[/tex]

Where vc and vs are the velocities of the cheetah and springbok, respectively, at time t, ac and as are their respective accelerations, dc and ds are their respective distances traveled in time t.

We are given that the cheetah's top speed is 100 km/h and the springbok's top speed is 65 km/h. We convert these to m/s and then use the fact that they reach top speed in 4 seconds to solve for their accelerations

ac = vc / t = 100 km/h / 3.6 s/h / 4 s = 6.94 m/[tex]s^{2}[/tex]

as = vs / t = 65 km/h / 3.6 s/h / 4 s = 4.51 m/[tex]s^{2}[/tex]

Now we can solve for the distance between the two animals at the start of the chase using the given time of 15 seconds

d = d_c - d_s

d = (1/2) ac [tex]t^{2}[/tex] - (1/2) a_s [tex]t^{2}[/tex]

d = (1/2) (ac - as) [tex]t^{2}[/tex]

d = (1/2) (6.94 m/[tex]s^{2}[/tex] - 4.51 m/[tex]s^{2}[/tex]) [tex](15s)^{2}[/tex]

d = 2475 m

Therefore, the cheetah must be within 2475 meters of the springbok at the start of the chase to catch it in 15 seconds.

To know more about speeds here

https://brainly.com/question/7359669

#SPJ4

The accumulated count of a CTU (Count Up) counter is a measure of the number of true-to-false transitions that have occurred. This means that for each true-to-false transition, the count is incremented by one. Therefore, option (a) is the correct answer.

It is important to note that the CTU counter is a type of counter in programmable logic controllers (PLCs) that counts the number of transitions from true to false of its input signal.

When the input signal changes from true to false, the count is incremented by one. The accumulated count can be reset to zero by a reset instruction or by powering off the PLC.
On the other hand, the CTD (Count Down) counter is a type of counter that counts the number of false-to-true transitions of its input signal. In this case, the count is decremented by one for each false-to-true transition.
In summary, the accumulated count of a CTU counter increments with each true-to-false transition, whereas the accumulated count of a CTD counter decrements with each false-to-true transition.

Understanding the difference between these two types of counters is important when designing and programming PLCs for industrial automation applications.

For similar question on accumulated count

https://brainly.com/question/31568302

#SPJ11

The  statement that adding yeast to a new septic tank speeds up digestion by a factor of 2.7 is not true.

Adding yeast to a new septic tank is not likely to speed up digestion, as the primary function of yeast is to ferment sugars into alcohol and carbon dioxide, rather than to break down waste materials. In fact, adding yeast to a septic tank may disrupt the natural balance of bacteria and other microorganisms that are responsible for breaking down and processing the waste.

The process of digestion in a septic tank is primarily carried out by anaerobic bacteria, which break down organic matter in the absence of oxygen. The rate of digestion depends on a variety of factors, including the size and design of the tank, the nature and amount of waste materials being processed, and the temperature and pH of the tank environment.

Therefore, the statement that adding yeast to a new septic tank speeds up digestion by a factor of 2.7 is not true.

Visit to know more about Digestion:-

brainly.com/question/21470803

#SPJ11

The detention time in the sedimentation process would be 45 minutes when one basin is out of service and the plant is operating at its maximum flow rate.

To calculate the detention time in a sedimentation basin, we need to know the volume of the basin and the flow rate of the plant.

The volume of one basin can be calculated as:

Volume = length x width x depth = 160 ft x 40 ft x 12 ft = 76,800 cubic feet

Since one basin is out of service, the effective volume of the system is 3/4 of this, or:

Effective volume = 3/4 x 76,800 cubic feet = 57,600 cubic feet

To calculate the detention time, we need to divide the effective volume by the flow rate of the plant.

Flow rate = 12.5 MGD = 18,150 cubic feet per hour

Detention time = effective volume / flow rate

Detention time = 57,600 cubic feet / 18,150 cubic feet per hour = 3.17 hours

Since there are 60 minutes in an hour, the detention time in minutes is:

Detention time = 3.17 hours x 60 minutes per hour = 190.2 minutes or approximately 190 minutes.

Learn more about flow rate

https://brainly.com/question/27880305

#SPJ4

Explanation:

Fn= normal force ( this determines the Ff  friction)

Fn = mg cosΘ = 3.7 * 9.81 cos (21 ) = 33.88 N

Ff = 33.88 N * .17 = 5.76  N

Fdp = force downplane = mg sinΦ = 3.7 * 9.81 sin 21  = 13.01 N

Total forces acting down the plane = 13.01 + 5.76 = 18.77 N

T = The force acting up the plane to move and accelerate the block

Then :

 F= ma

(T - 18.77 N) = 3.7 kg  ( .3 m/s^2 )

T = 19.88 N

Option b. The total mechanical energy used skating down this hill to the nearest whole number is 2516 J.

To take care of this issue, we can utilize the rule of protection of energy, which expresses that the complete mechanical energy of a framework stays steady in the event that there are no outer powers following up on it. At the highest point of the slope, the skater has potential energy equivalent to mgh, where m is the mass, g is the speed increase because of gravity, and h is the level of the slope. Consequently, the likely energy of the skater at the highest point of the slope is 60 kg × 9.8 m/s² × 3 m = 1764 J.

At the lower part of the slope, the skater has both dynamic energy and expected energy. Since the speed is given, we can ascertain the dynamic energy utilizing the condition KE = 0.5mv², where v is the speed. Accordingly, the dynamic energy of the skater at the lower part of the slope is 0.5 × 60 kg × (5 m/s)² = 750 J.

Since there is no erosion referenced in the issue, we can expect that the all out mechanical energy is saved. Subsequently, the absolute mechanical energy utilized skating down the slope is the amount of the potential and active energy, which is 1764 J + 750 J = 2514 J. Adjusted to the closest entire number, the response is 2516 J. Thusly, the right response is 2516 J.

To learn more about energy, refer:

https://brainly.com/question/30612481

#SPJ1

The correct answer is d. Radon gas emissions. Radon is a radioactive gas that can seep into homes and buildings from the ground and rocks beneath them.

It is a naturally occurring element in uranium deposits and is released during the process of nuclear power production. Radon exposure is a significant concern as it is the second leading cause of lung cancer after smoking. The greatest source of public exposure related to nuclear power production is radiation emitted from power plants. This radiation can come from a variety of sources, including the processing of uranium and plutonium fuel, the operation of reactors, and the disposal of nuclear waste. Nuclear power plants are required to meet strict safety standards and emit only a small amount of radiation into the environment.

To learn more about power plants click here https://brainly.com/question/14314816

#SPJ11

The answer is E) ; The volume of the brick is approximately 1.4 × 10³ cm³.

Volume is the amount of space occupied by a three-dimensional object.

To calculate the volume of a brick, we need to convert the dimensions of the brick from inches to centimeters to ensure consistent units. One inch is equal to 2.54 centimeters, so:

Length = 4.0 in × 2.54 cm/in = 10.16 cm

Width = 2.7 in × 2.54 cm/in = 6.858 cm

Height = 8.0 in × 2.54 cm/in = 20.32 cm

The volume of the brick is given by the product of its length, width, and height:

Volume = Length × Width × Height

Volume = 10.16 cm × 6.858 cm × 20.32 cm

Volume = 1,411.88 cm³

Therefore, the volume of the brick is approximately 1.4 × 10³ cm³. The answer is E) 1.4 × 10³ cm³.

Learn more about volume here:

https://brainly.com/question/1578538

#SPJ1

When the average distance between galaxies is 1.2 times as large as they are today, the temperature of the cosmic microwave background will be approximately 2.271 K.

To determine the temperature of the cosmic microwave background (CMB) when the average distances between galaxies are 1.2 times as large as they are today, we need to consider the relationship between the scale factor and the temperature of the CMB.

1. The scale factor (a) is proportional to the average distance between galaxies.

In this case, the scale factor will be 1.2 when the distances between galaxies are 1.2 times larger than today.

2. The temperature of the cosmic microwave background is inversely proportional to the scale factor.

Mathematically, this can be expressed as T(new) = T(current) / a.

3. The current temperature of the CMB is approximately 2.725 K.

4. Now, we can plug in the values to find the new temperature of the CMB:

T(new) = 2.725 K / 1.2.

5. Calculate the new temperature:

T(new) ≈ 2.271 K.

Learn more about temperature:

https://brainly.com/question/25677592

#SPJ11

According to the described experimental process, the student most likely carried out a type of paper chromatography. On the filter paper, the initial green ink stain was divided into two coloured spots, each of which was then put into a different well of a microplate.

The coloured specks were probably dissolved by the student's addition of equal parts ethanol and distilled water to each well, creating two distinct solutions.

The patterns that are produced when the student conducts the chromatography experiment again by spotting each solution onto various strips of filter paper will vary depending on the chemical composition of the original ink, the characteristics of the solvents employed, and the precise ink components that were separated during the initial chromatography.

The learner is likely to see many bands or spots on the ensuing chromatograms because the initial green ink spot led to two distinct coloured spots. The various pigments may have been separated during the initial chromatography if the original green ink was a blend of several colours, and they may show up as distinct bands on the new filter paper. Because different solvents have varying polarity and may separate the pigments in different ways, the precise colours and locations of these bands may vary depending on the particular solvents employed in the experiment.

It's also possible that the coloured dots in the microplate wells were caused by further ink component separation or reactivity.

Depending on the type of alterations that took place in this scenario, the final chromatograms may display different patterns or colours than the original chromatogram.

Overall, the precise patterns and hues seen in the new chromatograms will rely on a variety of variables and cannot be foreseen with precision without more data from the experiment.

learn more about chromatography here

https://brainly.com/question/1394204

#SPJ1

Where necessary to comply with Section 250-2(d), the equipment grounding conductors shall be sized larger than specified in NEC Table 250.122.

This is because the additional size is necessary to provide a margin of safety and prevent damage to the grounding conductors due to physical stresses, such as from bending, vibration, or impact.

NEC Table 250.122 specifies the minimum size equipment grounding conductor required for various sizes of circuit conductors but does not take into account the need for increased size due to physical protection requirements.

Learn more about the grounding conductors at

https://brainly.com/question/14405035

#SPJ4

10 to 15 percent of the original volume. Incineration is a waste treatment process that involves the combustion of organic substances in waste materials.

This process reduces the waste volume by converting it into ash and gases. The amount of residue left after incineration depends on various factors such as the type of waste material, the incinerator design, and the incineration temperature. In general, the amount of residue left after incineration is approximately 10 to 15 percent of the original volume.  Incineration is a waste treatment process that involves the combustion of organic substances in waste materials. During the process, the waste is subjected to high temperatures, which causes it to break down into ash, gas, and other byproducts. The amount of residue left after incineration depends on several factors, such as the type of waste being incinerated, the temperature and duration of the incineration process, and the efficiency of the incinerator itself. In general, it is estimated that the amount of residue left after incineration is approximately 10 to 15 percent of the original volume. However, this can vary depending on the factors mentioned above. In some cases, it may be higher, such as 25 percent of the original volume, but it is unlikely to be as high as 55 to 65 percent of the original volume. It is worth noting that the residue left after incineration is often much less bulky than the original waste, as much of the organic matter has been burned off. This can make it easier to dispose of the residue, as it takes up less space than the original waste.

Learn more about Incineration here:

https://brainly.com/question/9642236

#SPJ11

a. The ball bounces back up to its original height after each collision. b. The period of the motion depends only on the mass of the ball and the strength of gravity. c. the motion is not sinusoidal .

Define the terms "collision" and "resistance." A collision occurs when two objects come into contact with each other and exchange momentum and/or energy. Resistance, in the context of physics, refers to any force that opposes motion or energy transfer.
Now, let's apply these concepts to the question at hand. A ball dropped from a height of m undergoes an elastic collision with the ground, which means that there is no loss of mechanical energy due to the collision. This implies that the ball will rebound back up to its original height.
(a) To show that the ensuing motion is periodic, we need to demonstrate that the ball's motion repeats itself over time. Since the ball bounces back up to its original height after each collision, we can see that the motion is indeed periodic.
(b) The period of the motion is the time it takes for one complete cycle. In this case, one complete cycle consists of the ball falling from its original height, colliding with the ground, and rebounding back up to its original height. The time it takes for the ball to complete this cycle can be calculated using the formula:
T = 2 × √(m/g)
where T is the period of the motion, m is the mass of the ball, and g is the acceleration due to gravity. This formula tells us that the period of the motion depends only on the mass of the ball and the strength of gravity, and is independent of the height from which the ball is dropped.
(c) The motion of the ball is not simple harmonic because it does not follow the equation of motion for a simple harmonic oscillator, which is:
x = A × cos(ωt + Ф)
where x is the displacement of the oscillator, A is the amplitude of the motion, ω is the angular frequency, t is time, and Ф is the phase angle. In the case of the ball bouncing off the ground, the motion is not sinusoidal and does not follow this equation.

Learn more about collision here

https://brainly.com/question/4322828

#SPJ11

True. The statement Max magnetic flux is B times A and theta equals zero is true.

The assertion "Max magnetic flux is B times An and theta rises to nothing" is valid. Attractive motion is the proportion of the attractive field that goes through a given region. It is addressed by the image Φ and is characterized as the result of the attractive field strength (B), the region opposite to the attractive field (A), and the cosine of the point between the attractive field and the surface (θ). At the point when the point θ is zero, the cosine of θ is 1, and subsequently, the result of B and A turns into the greatest attractive transition. Subsequently, the assertion "Max attractive transition is B times An and theta rises to nothing" is valid, and it addresses the improved on variant of the attractive motion condition when the point between the attractive field and the surface is zero.

To learn more about magnetic flux, refer:

https://brainly.com/question/30906066

#SPJ4

As a general rule, water pipes should be separated from sewer pipes by a horizontal distance of 10 ft.

Water mains shall be laid at least 10 feet horizontally from any sanitary sewer, or sewer manhole, whenever possible; the distance shall be measured edge-to-edge (pipe wall to pipe wall). The minimum fall for a waste pipe is 1 in 40. The maximum fall is 1 in 110 (apart from vertical pipes but that's a different story). So pipes with a gradient between 1 in 40 and 1 in 110 should have adequate flow to prevent blockages from occurring.In other words, for every 100 feet the pipe travels horizontally, it should drop about half a foot vertically. .

Learn more about gradient here: https://brainly.com/question/13020257

#SPJ11

The term "half-value layer" (HVL) refers to the thickness of a material that reduces the intensity of radiation passing through it by 50%. In the case of beta radiation, it is commonly eliminated by using:  d. aluminum.

The term "half-value layer" (HVL) refers to the thickness of a material that will reduce the intensity of radiation passing through it by one-half. Beta radiation is a type of radiation that consists of high-energy electrons or positrons. Beta radiation can be eliminated or absorbed by materials with a high atomic number, such as lead or aluminum. Therefore, the correct answer is d. aluminum. Glass or plastic materials may not be effective at blocking beta radiation due to their low atomic numbers. Concrete can be effective at blocking beta radiation, but it may require a greater thickness compared to lead or aluminum.

Learn more about Concrete here: https://brainly.com/question/28903866

#SPJ11

The incorrect statement regarding holography is c. It is not true that several types of holograms can be reconstructed using regular white light to produce and show true color images.

In fact, most holograms are recorded and reconstructed using monochromatic light sources, such as lasers, which do not produce a full spectrum of colors.

The incorrect statement regarding holography is: c. since several types of holograms can be reconstructed using regular white light, these holograms can produce and show true color images. Most holograms require monochromatic light for proper reconstruction, and white light can cause distortions in color reproduction.

To know more about Holography click here .

brainly.com/question/1899017

#SPJ11

The electric field between the two plates moves in the direction from the positive metal plate to the negative metal plate.

When a positive metal plate is held near a negative metal plate, the electric field between the two plates moves from the positive plate to the negative plate. Here's a step-by-step explanation:
1. The positive metal plate has an excess of positive charges, while the negative metal plate has an excess of negative charges.
2. Electric field lines are always directed away from positive charges and towards negative charges.
3. Therefore, The direction of the movement of the electric field between the two plates is from the positive metal plate to the negative metal plate.

learn more about electric field Refer: https://brainly.com/question/30544719

#SPJ11

The  acceleration of the car is approximately 26 km/h^2.

To calculate the acceleration of the car, we can use the formula:

acceleration = (change in velocity) / time taken

Here, the change in velocity is 130 km/h - 0 km/h = 130 km/h, and the time taken is 5.0 s. Note that we need to convert the units of velocity and time to the same units before we can use this formula. Let's convert km/h to m/s by multiplying by 1000/3600:

130 km/h x (1000 m/km) / (3600 s/h) = 36.11 m/s

Now we can calculate the acceleration:

acceleration = (36.11 m/s) / (5.0 s) = 7.22 m/s^2

To convert this to km/h^2, we can multiply by (3600 s/h) / (1000 m/km):

7.22 m/s^2 x (3600 s/h) / (1000 m/kmthe) = 26 km/h^2

Therefore, the acceleration of the car is approximately 26 km/h^2.

Visit to know more about Acceleration:-

brainly.com/question/460763

#SPJ11

Faraday's lines of force always end on charges of opposite polarity.

In other words, if a line of force starts on a positive charge, it will always end on a negative charge and vice versa. This is because the lines of force represent the direction in which a positive test charge would move in the presence of an electric field. Since opposite charges attract each other, the lines of force will always end on a charge of opposite polarity to the one they started on. This concept is important in understanding the behavior of electric fields and their interaction with charged particles.

Learn more about Faraday's lines at https://brainly.com/question/17012638

#SPJ11

The resistivity of the wire is 2.7 x 10^-8 Ωm.

The resistivity of the wire is found to be 2.7 x 10^-8 Ωm by calculating the current flowing through it using the current density equation, multiplying the current density of 1.4x10^8 A/m^2 by the cross-sectional area of the wire, calculating the resistance of the wire using Ohm's law, and calculating the resistivity of the wire using the equation ρ = RA/L, where R is the resistance, A is the cross-sectional area of the wire, and L is its length, and substituting the values we have calculated.

To learn more about resistivity, click here:
https://brainly.com/question/29427458

#SPJ11

Rams are powered by water. A hydraulic ram works by using the force of flowing water to pump a smaller quantity of water to a higher elevation.

As the water flows through the ram, it creates a pressure differential that causes a valve to open and close, forcing water into a delivery pipe. This mechanism allows the ram to lift water from a lower source to a higher location without the need for external power sources such as electricity or heat.

Hydropower is used to power cyclic water pumps known as hydraulic ram pumps, ram pumps, or hydrams. It draws in water at one "hydraulic head" (pressure) and flow rate, then discharges water at a higher hydraulic head and lower flow rate. The device creates pressure by using the water hammer effect, which enables some of the water used to power the pump to be raised from its starting point to a higher one. When there is a low-head hydropower source and a need to pump water to a location at a higher elevation than the source, the hydraulic ram is occasionally utilised in isolated places. The ram is frequently helpful here because it doesn't need any other power source other

To know more about hydraulic ram click here:

https://brainly.com/question/22533401

#SPJ11

you will gain the same amount of potential energy regardless of the path you take

The potential energy gained depends on the height difference between the bottom and the top of the hill. Both paths will give you the same final potential energy, but the longer path will take more time and require more energy input to climb. Therefore, you will gain the same amount of potential energy regardless of the path you take. However, the longer path may require more physical effort and time to climb, even though it is less steep.

Learn more about potential energy at

brainly.com/question/24284560

#SPJ11

The astronaut feels an acceleration of 4.37 m/s² while standing on the edge of the space station. The acceleration felt by the astronaut is 2.24 times less than Earth's gravitational acceleration. One revolution should take 20.10 seconds for the astronauts to experience Earth's acceleration due to gravity.

The acceleration an astronaut feels while standing on the edge of the space station can be calculated using the formula a = v²/r, where v is the tangential speed and r is the radius. The tangential speed is the distance traveled per unit time, which is equal to the circumference of the circle (2πr) divided by the time taken for one revolution (30 seconds).

So, v = 2πr/30 = (2π × 100)/30 = 20.94 m/s

Substituting this value in the formula, we get

a = v²/r = (20.94)²/100 = 4.37 m/s²

Therefore, an astronaut on the edge of the space station feels an acceleration of 4.37 m/s².

To find how many times Earth's gravitational acceleration this is, we divide the acceleration due to gravity on Earth (9.81 m/s²) by the acceleration felt by the astronaut on the edge of the space station.

So, the number of times Earth's gravitational acceleration is

9.81/4.37 = 2.24

Therefore, the acceleration felt by the astronaut on the edge of the space station is 2.24 times less than Earth's gravitational acceleration.

If the astronauts are to experience Earth's acceleration due to gravity, then the centripetal acceleration of the space station should be equal to the acceleration due to gravity on Earth.

Using the same formula a = v²/r and substituting a = 9.81 m/s² and r = 100 m, we can solve for the tangential speed

v = √(ar) = √(9.81 × 100) = 31.30 m/s

To find the time taken for one revolution, we use the formula for circumference of the circle

C = 2πr = 2π × 100 = 628.32 m

The time taken for one revolution is equal to the circumference divided by the tangential speed

t = C/v = 628.32/31.30 = 20.10 seconds

Therefore, one revolution of the space station should take approximately 20.10 seconds for the astronauts to experience Earth's acceleration due to gravity.

To know more about acceleration:

https://brainly.com/question/30660316

#SPJ4

--The given question is incomplete, the complete question is given

" A space station of 100m radius completes a revolution every 30 seconds.

A. Find the acceleration an astronaut feels while standing on the edge of this station.

B. How many times earth’s gravitational acceleration is this?

C. How long should one revolution of the space station take if the astronauts are to experience earth’s acceleration due to gravity?"--

The stress would be one-fourth as large if stress could the bone experience if it were twice as large in diameter.

If the diameter of the bone were to double, the cross-sectional area would increase by a factor of four (πr²). Therefore, the stress would be distributed over a larger area, resulting in a decrease in stress.

The maximum stress a bone can experience before it fractures is around 108N/m2, so if the diameter were to double, the stress would be one-fourth as large, or around 27N/m2. This is because the stress is inversely proportional to the cross-sectional area. Therefore, the larger the area, the less stress is applied to any one point.

To know more about stress click here:

https://brainly.com/question/31366817

#SPJ11

Answer: Energy can neither be created nor destroyed but it can only be transformed from one form to another.

Explanation: According to the law of conservation of energy given by Julius Robert Mayer Energy can neither be created nor destroyed but it can only be transformed from one form to another.

it can be explained by an example that when we burn a candle, the chemical energy of wax is converted into light energy.

Also in dams the running water of the river is used to convert mechanical energy into hydroelectric energy