False. A RAID 3 array does not use distributed data or distributed parity like a RAID 5 array. Instead, data is striped across multiple disks and the parity information is stored on a dedicated disk.
Differences Between RAID 3 and RAID 5 ArraysRAID 3 is a type of RAID (Redundant Array of Independent Disks) designed to improve the performance of a single disk system by striping the data across multiple disks.
Data is stored in blocks that are broken up into stripes and written across multiple disks. To provide redundancy in case of disk failure, a dedicated parity disk is used to store parity information. This parity disk is used to recreate the data on the failed disk.
RAID 3 does not use distributed data or distributed parity like a RAID 5 array. Instead, the data is striped across multiple disks and the parity information is stored on a dedicated disk. RAID 3 is a good choice for applications that require high performance and data security, such as streaming media.
Learn more about Database: https://brainly.com/question/518894
#SPJ4
unlike signal transduction in many other sensory receptors, signal transduction in rods. results in hyperpolarization of the sensory cell.State True or False your answer: a. Trueb. False
This statement is true. unlike signal transduction in many other sensory receptors, signal transduction in rods. results in hyperpolarization of the sensory cell.
Hyperpolarization is whilst the membrane ability will become extra poor at a selected spot at the neuron's membrane, while depolarization is whilst the membrane capability turns into much less bad (extra effective). Hyperpolarization is a trade in a cellular's membrane ability that makes it greater poor. it is the opposite of a depolarization. It inhibits motion potentials by using increasing the stimulus required to move the membrane capability to the action capacity threshold.
throughout hyperpolarization, potassium ions keep leaking out of the cellular via potassium channels. This diffusion of potassium ions (positively charged ions) into the extracellular area makes the membrane potential greater bad.
To know more about hyperpolarization, visit:-
https://brainly.com/question/12982897
#SPJ4
when switches receive a frame, and don't know where to send it (there is no entry in its switching table), use a process called?
Flooding.
Flooding is a process used by switches to send a frame to every port on the switch when there is no entry for the destination address in its switching table. In other words, when a switch receives a frame and does not recognize the destination address, it will send that frame out to all the switch's ports. The purpose of flooding is to ensure that frames reach their intended destination, even if the switch doesn't have the necessary information to forward the frame. This allows the switch to request a response from the intended recipient and learn the sender's address, so it can add this information to its switching table and use it to forward future frames more efficiently. Flooding is a useful process but can also be a security concern. Unauthorized users can use flooding to send malicious frames to multiple hosts at once, which could potentially cause a denial of service attack. To minimize the threat of flooding, switches can be configured to limit the number of ports a frame is sent to or the number of times a frame can be sent.
read more about this at https://brainly.com/question/14774964
#SPJ4
which document is arguably the most famous of all security policies as this is one document that pretty much everyone who works for any organization i
Policy on acceptable use. Many businesses and educational institutions require personnel or students to sign an AUP before acquiring a network ID.
What is acceptable use policy ?A fair use policy, acceptable use policy, or acceptable use statement is a set of rules put in place by the owner, creator, or administrator of a computer network website or service. This establishes criteria for how the network, website, or system should be used and limits the ways in which they may be used.All of your IT systems, including computer hardware, mobile and IoT devices, software programmes, and internet and Wi-Fi usage, are secured according to the AUP. All authorised users should be covered by the AUP's scope.A fair usage policy sometimes imposes a limit on what can be utilised on a service that offers nominally limitless use for a predetermined charge. This is meant to permit appropriate usage while discouraging what is deemed excessive.To learn more about AUP refer :
https://brainly.com/question/24951641
#SPJ4
People from blank groups should be encouraged to participate in the field of computer science.
People from all backgrounds and groups should be encouraged to participate in the field of computer science. It is important for the field to be diverse and inclusive in order to benefit from a wide range of perspectives and experiences. This can help to foster innovation and new ideas, and can also help to ensure that the technology that is developed is fair and accessible to everyone.
Answer: Below
Explanation:
1. to collect data from two websites with different urls using a single analytics property, what feature must be set up? advanced filters cross-domain tracking event tracking custom dimensions
Cross-domain tracking must be configured in order to gather data from two websites with distinct URLs using a single analytics attribute.
Cross-domain simply enables you (a business analyst, analytics analyst, business owner, etc.) to see a website visitor's session as they move between domains as a single customer journey from the time of acquisition until conversion.
Scope is divided into four categories: product, hit, session, and user. Product - value is utilised with the specified product (Enhanced Ecommerce only). When a hit is made, the hit-value is applied to that particular hit.
The shopping behavior and checkout won't be connected without cross-domain tracking. Conversions across domains are not tracked.
Cross domain tracking makes it possible to follow users more closely as they move across your domains and makes it easier to see how visitors arrive at your website.
Know more about Cross domain tracking here:
https://brainly.com/question/14404374
#SPJ4
which is the first thing the compiler does when a function is called? group of answer choices creates a jump instruction to the function
Store the address of the function call is the first thing the compiler does when a function is called.
What Are CompilersCompiler is a program used to convert code written in natural language processing so that it can be understood by computers.
In compilating process, the compiler executes code that indicates when a binary high and low signal is needed in the processor arithmetic logic unit.
Types of compilersThere are two types of compilers that are commonly used by web developers.
A cross compiler that runs on machine 'A' and generates code for another machine 'B'. This compiler is capable of generating code for different platforms besides the platform it runs on. Source-to-source compiler or also called transcompiler, namely a compiler which translates source code written in one programming language into source code in another programming language.Even though the main job of the compiler is converting the code, there are several other tasks that it also performs. Here are some of them.
Breaking the source program into parts and applying grammatical structures to them. Build the desired target program from the intermediate representation and create a symbol table. Compiles source code and detects errors in it. Manages the storage space of all variables and code. Performs support for split compilation. Read and analyze the entire program to be translated into semantic equivalents. Translate source code into object code according to the type of machine used.Your question is incomplete but most probably your full question was:
Which is the first thing the compiler does when a function is called?
a.Converts the function's code to assembly b.Creates instructions to jump to the function c.Stores the address of the function call
d.Creates a jump instruction to the function
Learn more about compiler at https://brainly.com/question/27882492.
#SPJ4
Career and technology student organizations hold events to raise money for a charity. This is called ______
O conference
O competition
O networking
O philanthropy
to install the maximum amount of memory the board supports, it might be necessary to replace a smaller-capacity module with a larger-capacity module. can you use the existing memory modules to upgrade to the maximum amount of supported memory? explain your answer:
No, we are unable to upgrade to the system's maximum supported RAM using the currently installed memory modules.
On what kind of motherboard can memory be installed?There are various varieties of RAM. While older systems may need DDR3 or even DDR2 memory, most current PCs use DDR4 memory. Alongside Intel's powerful 12th-generation "Alder Lake" processors, high-bandwidth DDR5 kits have begun to appear on the market, however they are quite expensive and the CPUs still support the earlier standard as well.
How are the memory modules installed?Place the new memory module into the slot while holding the sides with both hands. Make sure the slots align with the bottom and side notches, which are where the contacts are.
To know more about module visit:-
https://brainly.com/question/21852411
#SPJ4
true or false? the function heading void somefunc( char arr[] ) is interchangeable with the heading void somefunc( char* arr )
True, the two function headings are interchangeable. In C and C++, arrays can be passed to functions as pointers, and the two notations (char arr[] and char* arr) are equivalent. This is because when an array is passed as an argument to a function, its value is automatically converted to a pointer to its first element.
Code is a set of instructions or statements that a computer can interpret and execute. It is used to write programs that can be executed on a computer or other device to perform a specific set of tasks. Code is typically written in a high-level programming language that is easier for humans to read and understand, and then it is translated into machine code that the computer can execute. Code can be used to create anything from simple applications to complex operating systems.
Learn more about code, here https://brainly.com/question/497311
#SPJ4
Which of the following is seen by consumers as the negative side of the convergence of real and digital worlds?
A. lack of convenience
B.trends toward isolation and lowered human interaction
C. lack of choice
D. eroding privacy
Eroding privacy is seen by consumers as the negative side of the convergence of real and digital worlds.
Is data privacy becoming extinct in the digital age?
The extensive collection of data, combined with the inherent benefits of new technology, has spawned the cynical notion that privacy is dead, and we should just accept it.
Both governments and large corporations have become data miners in the last decade, collecting information on every aspect of our activities, behavior, and lifestyle.
The constant transmission of big data from sensors and data-collection devices to central "brains" is enabled by new and inexpensive forms of data storage and the internet connectivity revolution — not only in content, but in just about everything (from smart appliances to nanobots inside people's bodies); the artificial intelligence revolution has made it possible to analyze the masses of data gathered in this way.
To know more about Privacy, visit: https://brainly.com/question/27034337
#SPJ4
on which dimensions should the performance of a distribution network be evaluated at the highest level?
Answer: Value provided to the customer and cost of meeting customer needs
Explanation:
Distribution refers to the steps taken to move and store a product from the supplier stage to the customer stage in the supply chain. At the highest level, the performance of a distribution network should be evaluated along two dimensions: (1) Value provided to the customer. (2) Cost of meeting customer needs.
greg wants to use a tool that can directly edit disks for forensic purposes. what commercial tool could he select from this list?
As Greg wants to use a tool that can directly edit disks for forensic purposes, the commercial tool that he can use will be C. WinHex.
In the field of computers and technology, WinHex can be described as such a commercial tool that is used by forensic data scientists due to its specific features such as editing of disks, and ability to recover multiple types of data. WinHex is a commercial tool focusing on forensic purposes that help in data retrieval as well as editing any kind of disk for forensic purposes. Hence, option C. WinHex is correct.
Other options such as dd, mem dump, and df are not correct because these are open-source tools that are not specifically designed for forensic purposes.
Although a part of your question is missing, you might be referring to this question:
Greg wants to use a tool that can directly edit disks for forensic purposes. what commercial tool could he select from this list?
A. dd
B. memdump
C. WinHex
D. df
To learn more about forensic, click here:
https://brainly.com/question/28296347
#SPJ4
describe how to send a value back from a function and then print out that value outside of the function. provide a simple example.
The void keyword, is basically indicates that the function should not return a value. If we want the function to return a value, we can use a data type (such as int, string, etc.) instead of void, and use the return keyword inside the function.
int myFunction(int x, int y) { return x + y; } int main() { int z = myFunction(5, 3); cout << z; return 0; } // Outputs 8 (5 + 3)
The return type of a function that returns normally but does not give its caller a result value is called the void type in several computer languages that are descended from C and Algol68. Such functions are frequently used for their side effects, such as carrying out a task or setting output parameters. Similar to Pascal's procedures and Visual Basic's syntactic structures that define subroutines, the void keyword type is used in this context. It is comparable to type theory and the unit type found in functional programming languages. A comparison can be found at Unit type#In programming languages.
Learn more about void keyword here:
https://brainly.com/question/13014112
#SPJ4
a company wants to establish a private, dedicated connection between aws and its on-premises datacenter. which aws service is the right choice for this requirement?
Answer:
If a company wants to establish a private, dedicated connection between AWS and its on-premises datacenter, the AWS service that is the right choice for this requirement is AWS Direct Connect. AWS Direct Connect is a dedicated network connection between AWS and a customer's on-premises datacenter. This connection bypasses the public internet, providing a more secure and reliable way to transfer data between the two environments. AWS Direct Connect also provides lower latencies and higher data transfer rates than a typical internet connection, making it well-suited for transferring large amounts of data between the company's on-premises datacenter and AWS.
if selective repeat protocol is using 5 bits to represent the sequence numbers. what is the maximum size of the sender window
if the 5 bits are used by the selective repeat procedure to indicate the sequence numbers. The sender window can only be as large as 31.
Stop-And-Wait ARQ
send window=1,receive window=1
Go-back-N ARQ
send window=2⁵ -1=31,receive window=1
Selective-Repeat ARQ
send window=2⁴=16,receive window=16
Microsoft created and marketed a number of exclusive graphical operating system families under the name Window. In the computing industry, each family serves a certain market segment. Instances include Windows NT for end users, Windows Server for servers, and Windows IoT for embedded systems. The Windows 9x, Windows Mobile and Windows Phone families are all no longer supported.
A graphical operating system shell for MS-DOS called Windows was initially introduced on November 20, 1985, in response to the rising demand for graphical user interfaces (GUIs).
Having a 75% market share as of April 2022, StatCounter reports that Windows is the most widely used desktop operating system worldwide. When accounting for desktop and mobile OSes, Windows is not the most popular operating system.
Learn more about window here:
https://brainly.com/question/28525121
#SPJ4
inspection verifies that none of the power windows moves up or down when either the master switch or the door switches are toggled. what could be the problem?
Your car's windows may be opened and shut with ease thanks to the electric window switch. Each window has a switch, and a master panel is on or next to the driver's door.
The regulator, motor, or fuse may wear out over time and need to be replaced. Keep an eye out for the following signs if you think your power window switch is failing or going bad: There may be a power outage in the electrical system if all of the windows stop functioning at once, meaning there is no response when you press the power window switch. Usually, a faulty relay or blown fuse is what's to blame for this issue. The master switch for the drivers may also be to blame.
Learn more about windows here-
https://brainly.com/question/28525121
#SPJ4
when you want to add a condition to a totals query, which option do you select from the totals row list?
The answer is Group By.
The option you would select from the Totals row list is "Group By". This will allow you to add a condition to the totals query.
A totals row list is a feature in Excel that allows users to quickly and easily summarize numerical data. It allows users to add values quickly, count the number of cells with values, calculate averages, and more. It is beneficial when working with large datasets and can help users rapidly identify trends or anomalies in their data.
It displays the total of each column or row in a table and can be used to calculate the average, median, count, sum, minimum, maximum, and other values. It can be used to analyze large datasets quickly and is especially useful for financial analysis.
learn more about TOTALS QUERY:
brainly.com/question/28487057
what is a retrovirus? find and post here a paper that describes another retrovirus. what does that retrovirus do?
A virus that employs RNA as its genomic material is referred to as a retrovirus.
When a cell becomes infected with a retrovirus, the retroviral RNA is converted to retroviral DNA, which is then inserted into the DNA of the host cell. More retroviruses are then produced by the cell, infecting further cells.
A retrovirus is a type of virus that alters a cell's genome by inserting a DNA copy of its RNA genome[a] into the host cell's DNA. When the virus enters the cytoplasm of the host cell, it employs its own reverse transcriptase enzyme to generate DNA from its RNA genome, which is the opposite of the typical process (backwards). An integrase enzyme then incorporates the new DNA into the genome of the host cell; at this point, the retroviral DNA is referred to as a provirus. The host cell then treats the viral DNA as a component of its own genome, translating and tranforming both the viral and cellular genes to create the proteins needed for the virus's replication.
Know more about retrovirus here:
https://brainly.com/question/17188460
#SPJ4
to protect your information and help you to remember passwords, use your social media account login information to log into another site. t or f
It is False to state that to protect your information and help you to remember passwords, use your social media account login information to log into another site.
How do you protect your information online?Cyber thieves are very interested in your personal and financial information. They may be able to access your financial information, get credit cards or loans, and damage your credit report after taking your identity.
Make careful to keep your personal data safe on social media.
Consider the "about me" fields to be optional.Master the art of privacy settings.Know who you're friends with.Make and employ a "off-limits" list.When you're finished, always log out.Make secure, secret passwords.Learn more about Passwords:
https://brainly.com/question/28114889
#SPJ1
all of the following apply to 'log-structured file systems' except: select one: a. memory sizes had stabilized b. file systems were not raid-aware c. existing file systems perform poorly on many common workloads d. memory sizes were growing
Except for "log-structured file systems," memory sizes have stabilized.
How does memory stabilization work?In order to stabilize related memories in long-term memory, it is thought that during sleep, neuronal representations of recent experiences become revived. Here, during slow-wave sleep, we started the process of reactivating particular memories.
Does a lack of sleep affect memory?Perhaps the most common unrecognized cause of forgetfulness is not getting enough sleep. In addition to mood swings and anxiety, memory issues can result from not getting enough regular sleep. Medications. A memory trace is stabilized after its initial acquisition by a group of processes known as memory consolidation.
To know more about file systems visit :-
https://brainly.com/question/29980100
#SPJ4
which relational maintenance strategiesin email with friends and family? a. openness and social networks b. positivity and assurances c. assurances and sharing tasks d. sharing tasks and positivity
Relationship-maintenance tactics via email with friends and family based on openness and social networks.
Social networks are a type of social structure made up of several social actors (such as people or organizations), groups of dyadic links, and other types of social interactions. The social network approach offers a collection of techniques for examining the structure of entire social entities and a number of ideas to account for the patterns seen in these structures. Social network analysis is used to study these structures to spot regional and global patterns, track down influential people, and analyze network dynamics.
Social psychology, sociology, statistics, and graph theory all contributed to the development of the academic discipline of social networks and their analysis of them. The dynamics of triads and the "web of group attachments" were highlighted by Georg Simmel's early structural theories in sociology.
Learn more about Social networks here:
https://brainly.com/question/16865755\
#SPJ4
which one of the following medications may be injected directly into the uterine muscle after a cesarean section? a.prednisone b.pitressin c.pitocin d.penicillin
The two procedures' safety and capacity to keep a healthy uterine tone were also contrasted.
The effectiveness of a single 100 microgram intravenous injection of the long-acting oxytocin analog, carbetocin, with that of a standard infusion of oxytocin with respect to intraoperative blood loss was compared in a double-blind, randomized study involving pregnant women undergoing cesarean section. Following placental delivery, 57 women received the study medication during elective cesarean sections, and blood was taken until abdominal closure. A sensitive colorimetric approach was used to determine the amount of intraoperative blood loss. Up to 24 hours following the procedure, position, fundus tone, and vital signs were evaluated. Additional uterotonic medications were noted to be necessary.
Learn more about standard here-
https://brainly.com/question/28902960
#SPJ4
nat terminology considers four types of addresses? (choose all that apply) a. global address b. outside address c. public address d. private address e. inside address f. local address
In terms of addresses, there are four different categories: public, private, global, and local. An electronic system that includes loudspeakers, amplifiers, and microphones is known as a public address system.
And related tools. The apparent volume rises as a result. An IP address designated for internal use only, hidden behind a router or other NAT device, is referred to as a private IP address. These contrast with public addresses, which are available to anybody and cannot be utilized inside a home or office network. A local IP address is another name for a private address. Party roles are referred to as roles that are connected to party records. There are a number of party roles that can be allocated to each kind of party.
Learn more about public address here
https://brainly.com/question/13177682
#SPJ4
stuff is a list of integers (with at least one element), what value is in the variable x after the code executes? x
A list's index typically ranges from 0 to n-1, where n is the number of values in the list as a whole.
Every variable and expression in the Java programming language has a type that is known at compile time since it is a statically typed language.
Because types restrict the values that a variable (see 4.12) or expression can create, the operations supported on those values, and the meaning of the operations, the Java programming language is also a tightly typed language. Strong static typing aids in error detection during compilation.
Primitive types and reference types are the two subcategories of types in the Java programming language. The boolean type and the numeric types are the primitive kinds (4.2). The integral types byte, short, int, long, and char, as well as the floating-point types float and double, make up the numeric types.
Know more about Java here:
https://brainly.com/question/12978370
#SPJ4
modify short_names by deleting the first element and changing the last element to joe.
To modify short_names by deleting the first element and changing the last element to joe, check the code given below.
What is element?A web browser is instructed by an HTML element on how to structure and interpret a particular section of the HTML document. Formatting guidelines, content, and semantic meaning can all be found in HTML elements.
For instance, headers, paragraphs, and footers are identified in documents using HTML elements, which are also used to embed content like text, images, and hyperlinks. HTML standards strongly recommend using CSS in place of HTML for formatting instructions, despite the latter's capability.
Opening and closing HTML tags that wrap around a piece of content frequently — but not always — result in the creation of an HTML element.
//CODE//
user_input = input()
short_names = user_input.split()
short_names.pop(0) short_names[-1] = 'Joe'
print(short_names)
Learn more about elements
https://brainly.com/question/18096867
#SPJ4
what tool can be used to determine what policy settings would apply to a computer or user account if it were moved to a different container?
When a machine or user account is relocated to a different container, that can be found using the Group Policy Modeling tool.
How effective is managing group policy?The Start Menu's Control Panel should be opened. After selecting the Windows icon from the Toolbar, select the Settings widget icon. Click the "Edit Group Policy" option after typing "group policy" or "gpedit."
How can I determine which policies are in effect?The utility can be accessed by pressing Start, typing "rsop. msc," and then clicking the displayed entry. The Resultant Set of Policy tool begins by looking for Group Policy settings that have been applied to your system.
To know more about Group Policy Modeling visit :-
https://brainly.com/question/25800356
#SPJ4
explain the bayes algorithm using the bayes decision rule (formula). and give an example how it is computed.
Bayes rule provides us with a way to update our beliefs based on the arrival of new, relevant pieces of evidence.
What is bayes algorithm using the bayes decision rule?Prior, Evidence, Likelihood, and Posterior are the four components of Bayes' Theorem. The likelihood that event 1 or event 2 will occur in nature is determined by the priors (P(1, 2)). It's crucial to understand that priors change based on the circumstances. A group of algorithms that all operate under the same guiding principle—namely, that each pair of features being categorised is unrelated to the others. The term "Naïve Bayes classifiers" refers to a group of classification methods built on the Bayes theorem. Based on the Bayes theorem's definition of conditional probability, the Naïve Bayes classifier operates. Probability is typically represented mathematically by the letter P. Following are some scenarios where these probability might apply: Two heads are likely to appear 1/4 of the time.
To learn more about bayes algorithm refer to:
https://brainly.com/question/21507963
#SPJ4
In thi exercie we look at memory locality propertie of matrix computation. The following code i written in C, where element within the ame row are tored contiguouly. Aume each word i a 32-bit integer. How many 32-bit integer can be tored in a 16-byte cache block?
A 16-byte cache block can store 4 32-bit integers. To determine how many 32-bit integers can be stored in a 16-byte cache block, we need to divide the size of the cache block (in bytes) by the size of a single 32-bit integer (in bytes).
A 16-byte cache block can store 4 32-bit integers because the size of the cache block determines the maximum number of bytes that can be stored in it, and the size of the 32-bit integers determines how many of them can fit in the cache block. By dividing the size of the cache block by the size of the integers, we can determine how many integers can fit in the cache block.
Here is the computation:
Since a 32-bit integer is 4 bytes, we can calculate the number of 32-bit integers that can be stored in a 16-byte cache block as follows:
16 bytes / 4 bytes/integer = 4 integers
Therefore, a 16-byte cache block can store 4 32-bit integers.
Learn more about cache block, here https://brainly.com/question/29744305
#SPJ4
quizlit identify the components of the inner ear. explain the specific function of each and the processes by which these functions are achieved.
The inner ear is divided into two main parts. The semicircular canals and the cochlea, which control hearing and balance, respectively.
The cochlea has two chambers that are divided by a membrane and has a snail-like shape. The three components are known as the inner ear, middle ear, and outer ear. The inner ear is made up of the cochlea, auditory nerve, and brain. Ossicles, which are middle ear bones, make up the middle ear (malleus, incus, stapes). The outer ear is made up of the pinna, ear canal, and eardrum. The region of the ear that contains the organs in charge of balance and hearing is the inner ear, commonly referred to as the labyrinth of the ear.
Learn more about middle here-
https://brainly.com/question/17844057
#SPJ4
400. that’s an error. your client has issued a malformed or illegal request. that’s all we know.
The inability to access a website could be due to various reasons. The accompanying error message reads Bad Request – Your client has issued a malformed or illegal request.
What is a 400 Bad Request Error?The server interprets a 400 Bad Request, also known as a 400 error or HTTP error 400, as a general client fault and returns it when it decides the error doesn't fit into any of the other status code categories.
The most important thing to grasp in this situation is that the 400 Bad Request error has to do with the client's submitted request before the server has even had a chance to process it.
How do you fix 400 Bad Request ?1. Verify the provided URL.
2. Wipe the browser's cache.
3. Delete all browser cookies.
4. File upload exceeds the server's limit
5. Delete the DNS Cache.
6. Switch off browser add-ons.
What is an error in URL string syntax?The URL being written incorrectly, having improper syntax, or having illegal characters in the URL can all result in the HTTP error 400.
This can occur if a URL was encoded wrongly, which is surprisingly simple to accomplish accidentally.
To learn more about bad request visit:
https://brainly.com/question/28244921
#SPJ4